Search NASA⌕ Search

SEARCH · Search NASA

Results for “Accountability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

A mixed-effects Statistical Model for Comparative LC-MS Proteomics Studies

Comparing a protein’s concentrations across two or more treatments is the focus of many proteomics studies. A frequent source of measurements for these comparisons is a mass spectrometry (MS) analysis of a protein’s peptide ions separated by liquid chromatography (LC) following its enzymatic digestion. Alas, LC-MS identification and quantification of equimolar peptides can vary significantly due to their unequal digestion, separation and ionization. This unequal measurability of peptides, the largest source of LC-MS nuisance variation, stymies confident comparison of a protein’s concentration across treatments. Our objective is to introduce a mixed-effects statistical model for comparative LC-MS proteomics studies. We describe LC-MS peptide abundance with a linear model featuring pivotal terms that account for unequal peptide LC-MS measurability. We advance fitting this model to an often incomplete LC-MS dataset with REstricted Maximum Likelihood (REML) estimation, producing estimates of model goodness-offit, treatment effects, standard errors, confidence intervals, and protein relative concentrations. We illustrate the model with an experiment featuring a known dilution series of a filamentous ascomycete fungus Trichoderma reesei protein mixture. For the 781 of 1546 T.reesei proteins with sufficient data coverage, the fitted mixed-effects models capably described the LC-MS measurements. The LC-MS measurability terms effectively accounted for this major source of uncertainty. Ninety percent of the relative concentration estimates were within 1/2 fold of the true relative concentrations. Akin to the common ratio method, this model also produced biased estimates, albeit less biased. Bias decreased significantly, both absolutely and relative to the ratio method, as the number of observed peptides per protein increased. Mixed-effects statistical modeling offers a flexible, well-established methodology for comparative proteomics studies integrating common experimental designs with LC-MS sample processing plans. It favorably accounts for the unequal LC-MS measurability of peptides and produces informative quantitative comparisons of a protein’s concentration across treatments with objective measures of uncertainties.

Environmental Molecular Sciences Laboratory↗

A New Theoretical Framework for Parameterizing Nonequilibrium Fractionation During Evaporation From the Ocean

The evaporation model for water isotopes proposed by Craig and Gordon (1965, https://books.google.co.in/books?id=6wIKAQAAIAAJ) is used in most isotope-enabled atmospheric models for the parameterization of nonequilibrium fractionation during evaporation from the ocean. In this model, one of the most uncertain parameters is the nonequilibrium fractionation factor 𝛼 𝑘 . Many isotope models use the formulation of Merlivat and Jouzel (1979, https://doi.org/10.1029/jc084ic08p05029), which parameterizes 𝛼 𝑘 as a function of wind speed and distinguishes between a smooth and a rough regime to account for the effect of ocean waves. The resulting discontinuity in 𝛼 𝑘 between smooth and rough regimes has been disputed by several empirical studies. Here, we present a new approach to parameterizing 𝛼𝑘 by explicitly accounting for the influence of wave drag on the momentum flux near the surface. Following Cifuentes-Lorenzen et al. (2018, https://doi.org/10.1007/s10546-018-0376-0), we add a third wave-induced component to the total momentum flux, in addition to the viscous and turbulent components, and extend the definition of the eddy viscosity to account for the momentum flux due to waves and turbulent dissipation near the surface. The new scheme predicts a slight decrease of 𝛼 𝑘 with wind speed, similar to the smooth-regime parameterization of Merlivat and Jouzel (1979, https://doi.org/10.1029/jc084ic08p05029). This new parameterization is incorporated into the isotope-enabled Community Atmosphere Model, where it improves the correlation of simulated and measured vapor deuterium excess relative to the default version and a version with constant 𝛼 𝑘 , suggesting that it may be used as a valid representation of fractionation during evaporation from the ocean in future isotope models.

54 ENVIRONMENTAL SCIENCES↗

Metatranscriptomic evidence of pervasive and diverse chemolithoautotrophy relevant to C, S, N and Fe cycling in a shallow alluvial aquifer

Groundwater ecosystems are conventionally thought to be fueled by surface-derived allochthonous organic matter and dominated by heterotrophic microbes living under often-oligotrophic conditions. However, in a 2-month study of nitrate amendment to a perennially suboxic aquifer in Rifle (CO), strain-resolved metatranscriptomic analysis revealed pervasive and diverse chemolithoautotrophic bacterial activity relevant to C, S, N and Fe cycling. Before nitrate injection, anaerobic ammonia-oxidizing (anammox) bacteria accounted for 16% of overall microbial community gene expression, whereas during the nitrate injection, two other groups of chemolithoautotrophic bacteria collectively accounted for 80% of the metatranscriptome: (1) members of the Fe(II)-oxidizing Gallionellaceae family and (2) strains of the S-oxidizing species, Sulfurimonas denitrificans. Notably, the proportion of the metatranscriptome accounted for by these three groups was considerably greater than the proportion of the metagenome coverage that they represented. Transcriptional analysis revealed some unexpected metabolic couplings, in particular, putative nitrate-dependent Fe(II) and S oxidation among nominally microaerophilic Gallionellaceae strains, including expression of periplasmic (NapAB) and membrane-bound (NarGHI) nitrate reductases. The three most active groups of chemolithoautotrophic bacteria in this study had overlapping metabolisms that allowed them to occupy different yet related metabolic niches throughout the study. Overall, these results highlight the important role that chemolithoautotrophy can have in aquifer biogeochemical cycling, a finding that has broad implications for understanding terrestrial carbon cycling and is supported by recent studies of geochemically diverse aquifers.

54 ENVIRONMENTAL SCIENCES↗

A framework to quantify mass flow and assess food loss and waste in the US food supply chain

Abstract Reducing food loss and waste can improve the efficiency of food supply chains and provide food security. Here we estimate mass flow as well as food loss and waste along the US food supply chain for 10 commodity groups and nine management pathways to provide a baseline for designing efficient strategies to reduce, recycle, and recover food loss and waste. We estimate a total food loss and waste of 335.4 million metric tonnes from the U.S. food supply chain in 2016. Water evaporation (19%), recycling (55%), and landfill, incineration, or wastewater treatment (23%) accounted for most of the loss and waste. The consumption stage accounted for 57% of the food loss and waste disposed of through landfill, incineration, or wastewater treatment. Manufacturing was the largest contributor to food loss and waste (61%) but had a high recycling rate. High demand, perishable products accounted for 67% of food waste. We suggest that funding for infrastructure and incentives for earlier food donation can promote efficiency and sustainability of the supply chain, promote FLW collection and recycling along the U.S. FSC, and improve consumer education in order to move towards a circular economy.

54 ENVIRONMENTAL SCIENCES↗

Molecular dynamics discovery of an extraordinary ionic migration mechanism in dislocation-containing TlBr crystals

TlBr can surpass CZT as the leading semiconductor for γ- and X-radiation detection. Unfortunately, the optimum properties of TlBr quickly decay when an operating electrical field is applied. Quantum mechanical studies indicated that if this property degradation comes from the conventional mechanism of ionic migration of vacancies, then an unrealistically high vacancy concentration is required to account for the rapid aging of TlBr seen in experiments. Here, we have applied large scale molecular dynamics simulations to study the effects of dislocations on ionic migration of TlBr crystals under electrical fields. We found that electrical fields can drive the motion of edge dislocations in both slip and climb directions. These combined motions eject enormous vacancies in the dislocation trail. Both dislocation motion and a high vacancy concentration can account for the rapid aging of the TlBr detectors. These findings suggest that strengthening methods to pin dislocations should be explored to increase the lifetimes of TlBr crystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling the electrochemical behavior and interfacial junction profiles of bipolar membranes at solar flux relevant operating current densities

A 1-dimensional, multi-physics model that accounts for the migration and diffusion of solution species, electrostatics, and chemical reactions, in particular water dissociation (WD), at bipolar membrane (BPM) interfaces was developed to study the electrochemical behavior of bipolar membranes (BPMs) at solar flux relevant operating current densities (tens of mA cm -2 ). Significant partial current densities for WD were observed at BPM voltages much less than the equilibrium voltage, e.g., 59 mV × ΔpH from both experiments and modeling. The co-ion leakage across the BPM at pH differentials accounted for the early presence of the partial current density for WD. Two distinctive electric field dependent WD pathways, the un-catalyzed pathway and the catalyzed pathway, were quantitatively and parametrically studied to improve the turn-on potential of the BPM. The catalyzed pathway accounted for the majority of the partial current density for WD at low voltages, while the un-catalyzed pathway dominated the WD at relatively high voltages. Significant WD was observed only within the interfacial CL (<5 nm), in which a large electric field was present. To improve the electrochemical behavior and the turn-on potential of BPMs, the impacts of the pKa of the immobilized WD catalysts, the electric-field dependent rate constant, the thickness of the catalyst layer and fixed charge density in BPMs on the partial current densities for WD were studied systematically. In addition, the electrochemical behavior and concentration profiles of BPMs in a buffered electrolyte were studied and contrasted with those in an un-buffered electrolyte from both modeling and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Planck intermediate results: XVII. Emission of dust in the diffuse interstellar medium from the far-infrared to microwave frequencies

The dust-Hi correlation is used to characterize the emission properties of dust in the diffuse interstellar medium (ISM) from far infrared wavelengths to microwave frequencies. The field of this encompasses the part of the southern sky best suited to study the cosmic infrared and microwave backgrounds. We cross-correlate sky maps from Planck , the Wilkinson Microwave Anisotropy Probe ( WMAP ), and the diffuse infrared background experiment ( DIRBE ), at 17 frequencies from 23 to 3000 GHz, with the Parkes survey of the 21 cm line emission of neutral atomic hydrogen, over a contiguous area of 7500 deg 2 centred on the southern Galactic pole. We present a general methodology to study the dust-Hi correlation over the sky, including simulations to quantify uncertainties. Our analysis yields four specific results. (1) We map the temperature, submillimetre emissivity, and opacity of the dust per H-atom. The dust temperature is observed to be anti-correlated with the dust emissivity and opacity. We interpret this result as evidence of dust evolution within the diffuse ISM. The mean dust opacity is measured to be (7.1 ± 0.6) × 10 -27 cm 2 H -1 × (v/353 GHz) 1.53 ± 0.03 for 100 ≤ v ≤ 353 GHz. This is a reference value to estimate hydrogen column densities from dust emission at submillimetre and millimetre wavelengths. (2) We map the spectral index β mm of dust emission at millimetre wavelengths (defined here as v ≤ 353 GHz), and find it to be remarkably constant at β mm = 1.51 ± 0.13. We compare it with the far infrared spectral index β FIR derived from greybody fits at higher frequencies, and find a systematic difference, β mm -β FIR = -0.15, which suggests that the dust spectral energy distribution (SED) flattens at v ≤ 353 GHz. (3) We present spectral fits of the microwave emission correlated with Hi from 23 to 353 GHz, which separate dust and anomalous microwave emission (AME). We show that the flattening of the dust SED can be accounted for with an additional component with a blackbody spectrum. This additional component, which accounts for (26 ± 6)% of the dust emission at 100GHz, could represent magnetic dipole emission. Alternatively, it could account for an increasing contribution of carbon dust, or a flattening of the emissivity of amorphous silicates, at millimetre wavelengths. These interpretations make different predictions for the dust polarization SED. (4) We analyse the residuals of the dust-Hi correlation. We identify a Galactic contribution to these residuals, which we model with variations of the dust emissivity on angular scales smaller than that of our correlation analysis. This model of the residuals is used to quantify uncertainties of the CIB power spectrum in a companion Planck paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Mass–metallicity and star formation rate in galaxies: A complex relation tuned to stellar age

In this work we study the stellar mass–metallicity relation (MZR) of an extended sample of star-forming galaxies in the local Universe and its possible dependence on the star formation rate (SFR). We selected a sample of approximately 195 000 Sloan Digital Sky Survey (SDSS) star-forming galaxies up to z = 0.22 with the aim of analysing the behaviour of the MZR with respect to SFR whilst taking into account the age of their stellar populations. For the first time, with this sample, we obtained aperture corrected oxygen and nitrogen-to-oxygen abundances (O/H and N/O, respectively) and SFR using the empirical prescriptions from the Calar Alto Legacy Integral Field Area (CALIFA) survey. To perform this study we also make use of the stellar mass of the galaxies and the parameter Dn(4000) as a proxy for the age of the stellar population. We derive a robust MZR locus, which is found to be fully consistent with the ‘anchoring’ points of a selected set of well-studied nearby galaxies for which the chemical abundance has been derived using the direct method. We observe a complex relation between MZR and SFR across the whole range of galaxy mass and metallicity, where the slope changes seen in the O/H–SFR plane present a pattern that seems to be tuned to the stellar age of the galaxies, and therefore stellar age has to be taken into account in the stellar mass–metallicity–SFR relation. In order to provide an answer to the question of whether or not the MZR depends on the SFR, it is essential to take into account the age of the stellar populations of galaxies. A strong dependence of the MZR on SFR is observed mainly for star-forming galaxies with strong SFR values and low D n (4000). The youngest galaxies of our SDSS sample show the highest SFR measured for their stellar mass.

79 ASTRONOMY AND ASTROPHYSICS↗

A broadband method to measure magnetic spectra of thin films

Conventional single-port strip-line techniques to measure permeability of thin films are based on the quasistationary approximation. In this paper, wave phenomena in the measurement cell are taken into account. Particularly, the dielectric response of the sample may be accounted for and removed by the consideration of the geometry of the cell and the sample. An additional measurement with a reference sample with known constitutive parameters allows the directivity error and the frequency response error to be removed from the experimental reflectivity data; accounting for the field inhomogeneity inside the strip cell is also introduced. A proper selection of the reference sample is shown to be critical for the measurement accuracy. The measurement results may also be affected by the demagnetization of the sample. With these corrections introduced, the operating frequency range of the technique is extended up to 8 GHz. The measurement results are validated by the data obtained with either standard materials or by conventional techniques.

36 MATERIALS SCIENCE↗

Detailed arsenic concentration profiles at Si/SiO{sub 2} interfaces

The pile-up of arsenic at the Si/SiO{sub 2} interface after As implantation and annealing was investigated by high resolution Z-contrast imaging, electron energy-loss spectroscopy (EELS), grazing incidence x-ray fluorescence spectroscopy (GI-XRF), secondary ion mass spectrometry, x-ray photoelectron spectroscopy, Rutherford backscattering spectrometry, as well as Hall mobility and four-point probe resistivity measurements. After properly taking into account their respective artifacts, the results of all methods are compatible with each other, with EELS and GI-XRF combined with etching providing similar spatial resolution on the nanometer scale for the dopant profile. The sheet concentration of the piled-up As at the interface was found to be {approx}1x10{sup 15} cm{sup -2} for an implanted dose of 1x10{sup 16} cm{sup -2} with a maximum concentration of {approx}10 at. %. The strain observed in the Z-contrast images also suggests a significant concentration of local distortions within 3 nm from the interface, which, however, do not seem to involve intrinsic point defects.

36 MATERIALS SCIENCE↗

Contributions Regarding the Aircraft Nuclear Propulsion

The possibility to use a nuclear reactor for airplanes propulsion was investigated taking in to account 2 possible solutions: the direct cycle (where the fluid pass through the reactor's core) and the indirect cycle (where the fluid is passing through a heat exchanger). Taking in to account the radioprotection problems, the only realistic solution seems to be the indirect cycle, where the energy transfer should be performed by a heat exchanger that must work at very high speed of the fluid. The heat exchanger will replace the classical burning room. We had performed a more precise theoretical study for the nuclear jet engine regarding the performances of the nuclear reactor, of the heat exchanger and of the jet engine. It was taken in to account that in the moment when the burning room is replaced by a heat exchanger, a new model for gasodynamic process from the engine must be performed. Studies regarding the high flow speed heat transfer were performed.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Nonmesonic Weak Decay of A-Hypernuclei within Independent-Particle Shell-Model

After a short introduction to the nonmesonic weak decay (NMWD)LAMBDAN->nN of LAMBDA-hypernuclei we discuss the long-standing puzzle on the ratio GAMMA{sub n}/GAMMA{sub p}, and some recent experimental evidences that signalized towards its final solution. Two versions of the Independent-Particle-Shell-Model (IPSM) are employed to account for the nuclear structure of the final residual nuclei. They are: (a) IPSM-a, where no correlation, except for the Pauli principle, is taken into account, and (b) IPSM-b, where the highly excited hole states are considered to be quasi-stationary and are described by Breit-Wigner distributions, whose widths are estimated from the experimental data. We evaluate the coincidence spectra in {sub L}AMBDA{sup 4}He, {sub L}AMBDA{sup 5}He, {sub L}AMBDA{sup 12}C, {sub L}AMBDA{sup 16}O, and {sub L}AMBDA{sup 28}Si, as a function of the sum of kinetic energies E{sub nN} = E{sub n}+E{sub N} for N = n, p. The recent Brookhaven National Laboratory experiment E788 on {sub L}AMBDA{sup 4}He, is interpreted within the IPSM. We found that the shapes of all the spectra are basically tailored by the kinematics of the corresponding phase space, depending very weakly on the dynamics, which is gauged here by the one-meson-exchange-potential. In spite of the straightforwardness of the approach a good agreement with data is achieved. This might be an indication that the final-state-interactions and the two-nucleon induced processes are not very important in the decay of this hypernucleus. We have also found that the pi+K exchange potential with soft vertex-form-factor cutoffs (LAMBDA{sub p}iapprox =0.7 GeV, LAMBDA{sub K}approx =0.9 GeV), is able to account simultaneously for the available experimental data related to GAMMA{sub p} and GAMMA{sub n} for {sub L}AMBDA{sup 4}H, and {sub L}AMBDA{sup 5}He.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

PIC-MCC/Fluid Hybrid Model for Low Pressure Capacitively Coupled O{sub 2} Plasma

Low pressure capacitively coupled plasmas are extensively used for advanced microelectronic device fabrication. Due to long electron mean free path and large bias voltages in this regime, kinetic effects play an important role in the dynamics of low pressure discharges. To take account of the kinetic effects, a one-dimensional hybrid plasma model has been developed that couples the Particle-In-Cell (PIC) technique for charged species and a fluid method for neutral species. The PIC model uses the Monte Carlo Collision (MCC) method to account for collision processes. The fluid model for neutral species takes into account species transport in the plasma, chemical reactions, and surface processes. An electronegative O{sub 2} plasma is simulated for a range of pressures (10-300 mTorr) and rf voltages (200-600 V) at 60 MHz. Our model for the O{sub 2} plasma considers electrons, O{sub 2}{sup +}, O{sup -}, O, and O*. The reaction mechanism includes electron impact dissociation, ionization, dissociative attachment and ion-ion recombination. Computational results are compared to our previous simulations for an electropositive Ar discharge. The electrons primarily absorb power from the external power supply at the sheath edge during sheath expansion. Energetic beam electrons are generated at the sheath edge during electron heating, which are responsible for plasma production and sustenance through collisions. The negative ions are found to be confined in the bulk plasma due to the potential well. The ratio of negative ions to electrons increases with increase in pressure and decrease in rf voltage. The spatial profiles of charged and neutral species in the plasma are found to primarily depend on species sources due to collisional processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anisotropic dissipative effects on the buoyancy instability with background heat flux

The linear buoyancy instability in magnetized plasmas is investigated in the presence of anisotropic resistivity and viscosity by taking into account the background heat flux. The magnetic field is assumed to be homogeneous and has both horizontal and vertical components. The heat is primarily transported along the magnetic force lines when the gyro radius is much less than the mean collision free path. The Hall term is examined first and shows a damping effect on the magnetothermal instability. The heat-flux-driven buoyancy instability (HBI) is then investigated by taking into account the parallel resistivity (PR), cross-field resistivity (CR), and the anisotropic viscosity. The general dispersion relation (DR) is derived and discussed in several special cases. We show that only the CR and viscosity exert effects on the DR in the first case. The critical condition for the occurrence of HBI is modified by the CR coupled with the viscosity and the value of the instability growth rate is diminished by them. The effects due to the PR (resp. viscosity) on the HBI are examined next. The PR (resp. viscosity) is shown to alter not only the growth rate but also the instability criterion. There exists an unstable mode when the temperature decreases in the direction of gravity while this case is proven to be magnetothermally stable in the ideal magnetohydrodynamic limit. A new unstable mode is solely induced by the presence of PR (resp. viscosity). When the PR and CR are both taken into account, the resistivity is shown to induce a damping mode rather than an instability. Finally, considering the PR and viscosity simultaneously, it is found that a new unstable mode is excited when the PR is not equal to the viscosity, or else, dissipation effects do not alter the instability criterion and just cut down the growth rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Large Quadrupole of Water Molecules

Many quantum mechanical calculations indicate water molecules in the gas and liquid phase have much larger quadrupole moments than any of the common site models of water for computer simulations. Here, comparisons of multipoles from quantum mechanical/molecular mechanical (QM/MM) calculations at the MP2/aug-cc-pVQZ level on a B3LYP/aug-cc-pVQZ level geometry of a waterlike cluster and from various site models show that the increased square planar quadrupole can be attributed to the p-orbital character perpendicular to the molecular plane of the highest occupied molecular orbital as well as a slight shift of negative charge toward the hydrogens. The common site models do not account for the p-orbital type electron density and fitting partial charges of TIP4P- or TIP5P-type models to the QM/MM dipole and quadrupole give unreasonable higher moments. Furthermore, six partial charge sites are necessary to account reasonably for the large quadrupole, and polarizable site models will not remedy the problem unless they account for the p-orbital in the gas phase since the QM calculations show it is present there too. On the other hand, multipole models by definition can use the correct multipoles and the electrostatic potential from the QM/MM multipoles is much closer than that from the site models to the potential from the QM/MM electron density. Finally, Monte Carlo simulations show that increasing the quadrupole in the soft-sticky dipole-quadrupole-octupole multipole model gives radial distribution functions that are in good agreement with experiment

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Kinetic models of partially ionized complex plasmas in the low frequency regime

The results from three kinetic models of complex plasmas taking into account collisions with neutrals are compared in the low-frequency regime: The ''full'' model which considers the absorption of plasma fluxes on dust particles and dust charge fluctuations, the ''multi-component'' model where both these effects are neglected, and the ''standard'' model which takes into account the dust charge perturbations but not the absorption of fluxes. We derive and numerically evaluate expressions of the low frequency responses of these models, also taking into account the modification of the capture cross-sections due to the effect of neutrals. The role of plasma sources and collisions with neutrals is assessed by computing the plasma permittivities and static permittivities for all the three models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correction factors for saturation effects in white light and laser absorption spectroscopy for application to low pressure plasmas

In white light absorption spectroscopy, the broadening of the absorption signal due to the apparatus profile of the spectrometer may lead to an underestimation of the determined density as one measures an apparent optical depth. This is in particular true for high optical depth where saturation effects of the transmitted intensity occur. Provided that the line profile of the absorption line is known, the apparent optical depth effect can be accounted for by introducing a correction factor. The impact of the saturation and the approach of considering the effect are demonstrated for argon and indium lines in low pressure plasmas where correction factors of one order of magnitude or even higher are reached very easily. For the indium line, the hyperfine splitting has been taken into account. In laser absorption, the line profile is resolved. However, the weak but rather broad background emission of the laser diode can cause a saturation signal at the photo diode resulting also in an underestimation of the density obtained from the analysis. It is shown that this can be taken into account by fitting the theoretical line profile to the measured absorption signal which yields also a correction factor. The method is introduced and demonstrated at the example of the cesium resonance line including the hyperfine splitting. Typical correction factors around two are obtained for the cesium ground state density at conditions of a low pressure negative hydrogen ion source in which cesium is evaporated to enhance the negative ion production.

74 ATOMIC AND MOLECULAR PHYSICS↗

On the spatial stability of a liquid jet in the presence of vapor cavities

A dispersion equation describing the effect of temperature differences on the stability of three-dimensional cylindrical liquid jets in the presence of vapor cavities is presented by the use of linear stability analysis. The mathematical model and its solving method are verified by comparing them with the data in the literature, and then the effect of temperature differences between jet and surrounding gas on the spatial stability of liquid jet is investigated. Some conclusions can be drawn from the results of this investigation: (1) the temperature difference destabilizes the liquid jet when the jet liquid is cooler than the surrounding gas, (2) the smallest atomized droplet without taking into account the effect of temperature differences is significantly larger than that when the effect of temperature differences is taken into account, (3) the effect of temperature differences on the stability of liquid jet has little relationship with azimuthal wave modes, (4) cavitation destabilizes the liquid jet when the value of the bubble volume fraction is not greater than 0.1 (0 ≤ α ≤ 0.1), and the temperature difference can weaken this effect of cavitation on the stability of liquid jet, and (5) cavitation is responsible for generating smaller droplets, the effect of cavitation on the critical wave number with and without taking into account the effect of temperature differences is quite different, and temperature difference is likely to fully restrain the effect of cavitation on the critical wave number; however, cavitation is again responsible for generating smaller droplets despite the effect of temperature differences when the bubble volume fraction α = 0.1. These findings may explain some observations of practical atomizer performance.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗