Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

An analysis of the flow field near the fuel injection location in a gas core reactor.

An analytical study is presented which shows the effects of large energy release and the concurrent high acceleration of inner stream fluid on the coaxial flow field in a gas core reactor. The governing equations include the assumptions of only radial radiative transport of energy represented as an energy diffusion term in the Euler equations. The method of integral relations is used to obtain the numerical solution. Results show that the rapidly accelerating, heat generating inner stream actually shrinks in radius as it expands axially.

Weinstein, H.↗

Preliminary analysis of effect of Vanadium Self-Powered Neutron Detectors on AP1000 reactor core physical parameters - 360

For the AP1000 reactor, the Vanadium Self-Powered Neutron Detectors are installed in the instrumentation thimbles of the fuel assembly. The (n,? ) reaction of Vanadium SPNDs will impact on the neutron spectrum of the location, and finally impact on the reactor core physical parameters. But, this effect is not considered for the AP1000 reactor Nuclear Design. So, it is necessary to analyze the effect of the presence of Vanadium SPNDs on the AP1000 reactor core physical parameters. CASMO5 is used to calculate physical parameters of four typical assemblies of AP1000 reactor, and SIMULATE5 is used to calculate physical parameters of the initial cycle. The results show that the maximum absolute deviations of K-infinite, pin power, thermal flux for the assemblies are 181 pcm, 6.3% and 20.1%, separately. The maximum absolute deviations of critical boron concentration, heat flux hot channel factor, nuclear enthalpy rise hot channel factor, axial offset, quadrant power tilt ratio and axial power distribution of the initial cycle are 5 ppm, 0.7%, 0.5%, 0.1%,0.09% and 0.19%,separately. So, the presence of Vanadium SPNDs has a significant impact on the power distribution of pin cells around the instrumentation thimble and the thermal flux in the location of instrumentation thimble, but doesn't affect core physical parameters of the initial cycle very much. As is shown, it is very important to accurately consider the effect of presence of Vanadium SPNDs when calculating the Vanadium SPNDs current response. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

SAS4A model development for the analysis of postulated severe accidents in metal fuel sodium fast reactors

The SAS4A code has been designed to simulate the events that occur in Sodium Fast Reactor (SFR) during the initiating phase of severe unprotected accidents. The initial SAS4A models were focused on the behavior of oxide fuel cores. An effort to expand the SAS4A models for the analysis of metal fuel cores is currently underway. This paper describes the status of the SAS4A metal fuel model development and presents initial results from the simulation of a postulated fuel assembly blockage accident in the Prototype Gen-IV Sodium Fast Reactor (PGSFR). (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Mean-spherical model for soft potentials - The hard core revealed as a perturbation

The mean-spherical approximation for fluids is extended to treat the case of dense systems interacting via soft potentials. The extension takes the form of a generalized statement concerning the behavior of the direct-correlation function c(r) and the radial-distribution function g(r). From a detailed analysis that views the hard-core portion of a potential as a perturbation on the whole, a specific model is proposed which possesses analytic solutions for both Coulomb and Yukawa potentials, in addition to certain other remarkable properties. A variational principle for the model leads to a relatively simple method for obtaining numerical solutions.

Rosenfeld, Y.↗

One‐Step Synthesis of Hybrid Core–Shell Metal–Organic Frameworks

Abstract Epitaxial growth of MOF‐on‐MOF composite is an evolving research topic in the quest for multifunctional materials. In previously reported methods, the core–shell MOFs were synthesized via a stepwise strategy that involved growing the shell‐MOFs on top of the preformed core‐MOFs with matched lattice parameters. However, the inconvenient stepwise synthesis and the strict lattice‐matching requirement have limited the preparation of core–shell MOFs. Herein, we demonstrate that hybrid core–shell MOFs with mismatching lattices can be synthesized under the guidance of nucleation kinetic analysis. A series of MOF composites with mesoporous core and microporous shell were constructed and characterized by optical microscopy, powder X‐ray diffraction, gas sorption measurement, and scanning electron microscopy. Isoreticular expansion of microporous shells and orthogonal modification of the core was realized to produce multifunctional MOF composites, which acted as size selective catalysts for olefin epoxidation with high activity and selectivity.

Yang, Xinyu↗

One-Step Synthesis of Hybrid Core-Shell Metal-Organic Frameworks

Epitaxial growth of MOF-on-MOF composite is an evolving research topic in the quest for multifunctional materials. During prior approaches, the core–shell MOFs were synthesized via a stepwise strategy that involved growing the shell-MOFs on top of the preformed core-MOFs with matched lattice parameters. Yet, the inconvenient stepwise synthesis and the strict lattice-matching requirement have limited the preparation of core–shell MOFs. Herein, we demonstrate that hybrid core–shell MOFs with mismatching lattices can be synthesized under the guidance of nucleation kinetic analysis. A series of MOF composites with mesoporous core and microporous shell were constructed and characterized by optical microscopy, powder X-ray diffraction, gas sorption measurement, and scanning electron microscopy. Isoreticular expansion of microporous shells and orthogonal modification of the core was realized to produce multifunctional MOF composites, which acted as size selective catalysts for olefin epoxidation with high activity and selectivity.

36 MATERIALS SCIENCE↗

Nondestructive Evaluation (NDE) for Inspection of Composite Sandwich Structures

Composite honeycomb structures are widely used in aerospace applications due to their low weight and high strength advantages. Developing nondestructive evaluation (NDE) inspection methods are essential for their safe performance. Flash thermography is a commonly used technique for composite honeycomb structure inspections due to its large area and rapid inspection capability. Flash thermography is shown to be sensitive for detection of face sheet impact damage and face sheet to core disbond. Data processing techniques, using principal component analysis to improve the defect contrast, are discussed. Limitations to the thermal detection of the core are investigated. In addition to flash thermography, X-ray computed tomography is used. The aluminum honeycomb core provides excellent X-ray contrast compared to the composite face sheet. The X-ray CT technique was used to detect impact damage, core crushing, and skin to core disbonds. Additionally, the X-ray CT technique is used to validate the thermography results.

Zalameda, Joseph N.↗

Thermal Design and Optimization of High- Power Wireless Charging System

In this paper, the thermal design and optimization of a high-power wireless charging system (WCS) is proposed. An integrated electromagnetic and thermal co-optimization is essential to design a high power-density WCS pad. This study presents the thermal analysis and the potential optimization scopes for a polyphase WCS pad. The coil and core causes most of the power losses of a WCS pad and causes thermal hotspot in the pad. In this paper, the thermally conductive epoxy is introduced to balance the effective volumetric loss density in the pad and mitigate the thermal hotspots in the coil and core. The proposed design is simulated through finite element analysis (FEA) and tested experimentally for a 50 kW three-phase WCS. Simulation and experimental results show that the conventional design has localized hotspots in the coil and core. The proposed thermal design mitigates the thermal hotspots without increasing the coil or core volume.

Mohammad, Mostak↗

Xi-CAM v1.2.3

Xi-CAM aims to provide a community driven platform for multimodal analysis in synchrotron science. The platform core provides a robust plugin infrastructure for extensibility, allowing continuing development to simply add further functionality. Current modules include tools for characterization with (GI)SAXS, Tomography, and XAS. This will continue to serve as a development base as algorithms for multimodal analysis develop. Seamless remote data access, visualization and analysis are key elements of Xi-CAM, and will become critical to synchrotron data infrastructure as expectations for future data volume and acquisition rates rise with continuously increasing throughputs. The highly interactive design elements of Xi-cam will similarly support a generation of users which depend on immediate data quality feedback during high-throughput or burst acquisition modes.

Pandolfi, Ronald↗

A TOpographic Mapping (ATOM) Method to Design Magnetic Cores

Wireless power transfer offers safe, convenient, and efficient way of charging electric vehicles. Ongoing research is targeting wireless charging pad design optimization; designing the magnetic component is the most important part of the coupler design because the magnetic part determines the coupling factor and efficiency. Optimizing the coil layout and geometry as well as ferrite design requires finite elements analysis based modeling and simulation for minimized core losses, maximized magnetic coupling, and minimized material use for cost-effectiveness. Although parametric finite element analysis or emerging artificial intelligence methods can generate very accurate results, simulation times are extremely long. To address this issue, this study proposes a simple, effective core design called A TOpographic Mapping (ATOM). The proposed design is based on the design of magnetic core by using the magnetic flux distribution. The thickness of the core increases with increasing magnetic flux density, forming a variable thickness core design with less material and minimized core losses compared to conventional designs. A superimposing method is used to create an optimal design for a rotational magnetic field-based system. According to simulation results, the ATOM design reduces the required material volume by 13.19% and yields the lowest core loss and highest mutual inductance compared to other designs. In addition, misalignment, electromagnetic interference, and thermal performance were evaluated for the proposed design.

Aydin, Emrullah [Oak Ridge National Laboratory (OR↗

Chemical characterization of lunar core 60010

Twenty-eight major, minor, and trace-element abundances have been determined in nine fines fractions of core 60010 by instrumental thermal and 14 MeV neutron activation analysis. With the exception of the elements Fe, Co, and Ni, core section 60010 exhibits a much more uniform composition than the lower section (60009) of the double drive tube collected at the Apollo 16 LM site. The siderophilic meteorite indicator elements Fe, Co, and Ni are significantly enriched in subsample 40, which is located 3.0-4.5 cm below the lunar surface, and are highly variable throughout the 60010 core section. Microscopic examination of subsample 40 revealed the presence of numerous metallic fragments including an approximately 1-mm metal fragment exhibiting only Fe, Co, Ni, and Ir gamma-ray peaks and having a composition typical of a coarse octahedrite. Composition profiles of 60010 exhibit small variations in lithophilic element abundances which can be related to most of the seven stratigraphic units of Duke and Nagle (1976). Although the basal portion of 60010 has been described as texturally similar to the upper unit of 60009, the present chemical studies show a marked compositional difference at this interface.

Ali, M. Z.↗

Benchmark Evaluation of the HTR-PROTEUS Absorber Rod Worths (Core 4)

PROTEUS was a zero-power research reactor at the Paul Scherrer Institute (PSI) in Switzerland. The critical assembly was constructed from a large graphite annulus surrounding a central cylindrical cavity. Various experimental programs were investigated in PROTEUS; during the years 1992 through 1996, it was configured as a pebble-bed reactor and designated HTR-PROTEUS. Various critical configurations were assembled with each accompanied by an assortment of reactor physics experiments including differential and integral absorber rod measurements, kinetics, reaction rate distributions, water ingress effects, and small sample reactivity effects [1]. Four benchmark reports were previously prepared and included in the March 2013 edition of the International Handbook of Evaluated Reactor Physics Benchmark Experiments (IRPhEP Handbook) [2] evaluating eleven critical configurations. A summary of that effort was previously provided [3] and an analysis of absorber rod worth measurements for Cores 9 and 10 have been performed prior to this analysis and included in PROTEUS-GCR-EXP-004 [4]. In the current benchmark effort, absorber rod worths measured for Core Configuration 4, which was the only core with a randomly-packed pebble loading, have been evaluated for inclusion as a revision to the HTR-PROTEUS benchmark report PROTEUS-GCR-EXP-002.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Carbon-Supported IrNi Core-Shell Nanoparticles: Synthesis Characterization and Catalytic Activity

We synthesized carbon-supported IrNi core-shell nanoparticles by chemical reduction and subsequent thermal annealing in H{sub 2}, and verified the formation of Ir shells on IrNi solid solution alloy cores by various experimental methods. The EXAFS analysis is consistent with the model wherein the IrNi nanoparticles are composed of two-layer Ir shells and IrNi alloy cores. In situ XAS revealed that the Ir shells completely protect Ni atoms in the cores from oxidation or dissolution in an acid electrolyte under elevated potentials. The formation of Ir shell during annealing due to thermal segregation is monitored by time-resolved synchrotron XRD measurements, coupled with Rietveld refinement analyses. The H{sub 2} oxidation activity of the IrNi nanoparticles was found to be higher than that of a commercial Pt/C catalyst. This is predominantly due to Ni-core-induced Ir shell contraction that makes the surface less reactive for IrOH formation, and the resulting more metallic Ir surface becomes more active for H{sub 2} oxidation. This new class of core-shell nanoparticles appears promising for application as hydrogen anode fuel cell electrocatalysts.

08 HYDROGEN↗

Deterministic High-Fidelity Neutronics Simulation of Pebble Bed Reactors Using Pebble Tracking Transport

The pebble tracking transport (PTT) algorithm offers a high-fidelity deterministic approach for neutron transport for pebble bed reactors (PBRs). This approach requires the mesh for the active-core region to consist exclusively of tetrahedral elements, where each node in the pebble-packing region represents a pebble centroid. This paper investigates the application of PTT for full-scale PBRs, considering both the isothermal and the temperature-dependent core conditions. Macroscopic cross sections are generated using Serpent 2 full-core eigenvalue simulations where pebbles are grouped into disjoint subsets using machine learning. To minimize the need for individual cross-section sets for each pebble in the core, K-means clustering is used to group pebbles by temperature and neutronic environment parameters. Here, we compare the multiplication factor and power rate distributions between PTT simulations using the Griffin reactor physics software and reference solutions from Serpent 2. Our analysis shows that a full-core, high-fidelity PTT calculation produces accurate results with minimal local (pebblewise) errors. Additionally, timing results indicate that PTT simulations converge rapidly on modern supercomputing platforms.

Griffin↗

Maintaining a Local Data Integration System in Support of Weather Forecast Operations

Since 2000, both the National Weather Service in Melbourne, FL (NWS MLB) and the Spaceflight Meteorology Group (SMG) at Johnson Space Center in Houston, TX have used a local data integration system (LDIS) as part of their forecast and warning operations. The original LDIS was developed by NASA's Applied Meteorology Unit (AMU; Bauman et ai, 2004) in 1998 (Manobianco and Case 1998) and has undergone subsequent improvements. Each has benefited from three-dimensional (3-D) analyses that are delivered to forecasters every 15 minutes across the peninsula of Florida. The intent is to generate products that enhance short-range weather forecasts issued in support of NWS MLB and SMG operational requirements within East Central Florida. The current LDIS uses the Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) package as its core, which integrates a wide variety of national, regional, and local observational data sets. It assimilates all available real-time data within its domain and is run at a finer spatial and temporal resolution than current national- or regional-scale analysis packages. As such, it provides local forecasters with a more comprehensive understanding of evolving fine-scale weather features

Watson, Leela R.↗

Maintaining a Local Data Integration System in Support of Weather Forecast Operations

Since 2000, both the National Weather Service in Melbourne, FL (NWS MLB) and the Spaceflight Meteorology Group (SMG) have used a local data integration system (LDIS) as part of their forecast and warning operations. Each has benefited from 3-dimensional analyses that are delivered to forecasters every 15 minutes across the peninsula of Florida. The intent is to generate products that enhance short-range weather forecasts issued in support of NWS MLB and SMG operational requirements within East Central Florida. The current LDIS uses the Advanced Regional Prediction System (ARPS) Data Analysis System (ADAS) package as its core, which integrates a wide variety of national, regional, and local observational data sets. It assimilates all available real-time data within its domain and is run at a finer spatial and temporal resolution than current national- or regional-scale analysis packages. As such, it provides local forecasters with a more comprehensive and complete understanding of evolving fine-scale weather features. Recent efforts have been undertaken to update the LDIS through the formal tasking process of NASA's Applied Meteorology Unit. The goals include upgrading LDIS with the latest version of ADAS, incorporating new sources of observational data, and making adjustments to shell scripts written to govern the system. A series of scripts run a complete modeling system consisting of the preprocessing step, the main model integration, and the post-processing step. The preprocessing step prepares the terrain, surface characteristics data sets, and the objective analysis for model initialization. Data ingested through ADAS include (but are not limited to) Level II Weather Surveillance Radar- 1988 Doppler (WSR-88D) data from six Florida radars, Geostationary Operational Environmental Satellites (GOES) visible and infrared satellite imagery, surface and upper air observations throughout Florida from NOAA's Earth System Research Laboratory/Global Systems Division/Meteorological Assimilation Data Ingest System (MADIS), as well as the Kennedy Space Center ICape Canaveral Air Force Station wind tower network. The scripts provide NWS MLB and SMG with several options for setting a desirable runtime configuration of the LDIS to account for adjustments in grid spacing, domain location, choice of observational data sources, and selection of background model fields, among others. The utility of an improved LDIS will be demonstrated through postanalysis warm and cool season case studies that compare high-resolution model output with and without the ADAS analyses. Operationally, these upgrades will result in more accurate depictions of the current local environment to help with short-range weather forecasting applications, while also offering an improved initialization for local versions of the Weather Research and Forecasting model.

Watson, Leela R.↗

Development of multi-objective core optimization framework and application to sodium-cooled fast test reactors

The optimization of a Sodium-cooled Fast Reactor (SFR) core is a challenging process, due to the large number of design parameters, the nonlinearities among inputs and outputs, and the complicated correlation among output parameters. This study attempts to develop a generalized framework for the SFR core optimization by coupling the sensitivity analysis, advanced optimization algorithm, and optionally the surrogate modeling. The framework is built based on the fast reactor modeling capability of the Argonne Reactor Computation (ARC) suite and the sensitivity analysis and optimization modules embedded in the DAKOTA code, both have been integrated within the NEAMS Workbench. The genetic algorithm is selected as the optimization method for its robustness, while the option of surrogate modeling is also explored to alleviate the computational burden caused by employing the ARC direct core physics simulation and thus enhance the efficiency of the optimization. Finally, the normalized deviations of performance parameters of the near-optimal solution from those of the ideal core are calculated and used as criteria to down select the final core design. The developed framework is applied to the Advanced Burner Test Reactor (ABTR) core, and optimal solutions are determined by balancing various objectives simultaneously, including peak fast flux, core volume, power, reactivity swing, plutonium mass feed, while at the same time satisfying the predefined constraints due to safety or economics considerations. The optimal ABTR core design obtained using the direct physical simulation and surrogated model are compared and discussed. It is found that using the accurately constructed surrogate models can significantly reduce the required computational time while maintaining satisfactory accuracy.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗