Search NASA⌕ Search

SEARCH · Search NASA

Results for “Core Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

Partitioning of K, U, and Th between sulfide and silicate liquids - Implications for radioactive heating of planetary cores

Experimental partitioning studies are reported of K, U, and Th between silicate and FeFeS liquids designed to test the proposal that actinide partitioning into sulfide liquids is more important then K partitioning in the radioactive heating of planetary cores. For a basaltic liquid at 1450 C and 1.5 GPa, U partitioning into FeFeS liquids is five times greater than K partitioning. A typical value for the liquid partition coefficient for U from a granitic silicate liquid at one atmosphere at 1150 C and low fO2 is about 0.02; the coefficient for Th is similar. At low fO2 and higher temperature, experiments with basaltic liquids produce strong Ca and U partitioning into the sulfide liquid with U coefficient greater than one. The Th coefficient is less strongly affected.

Murrell, M. T.↗
DOE OSTI2025

Mechanical Design of the PIP-II ORBUMP Pulsed Dipole Magnet

The Proton Improvement Plan-II (PIP-II) is a vital upgrade to Fermilab's accelerator complex. The upgrade is designed to power the world s most intense high-energy neutrino beam in future experiments. The magnet pulse repetition rate of the PIP-II injection system is being upgraded from 15 Hz to 20 Hz and requires a roughly 30% increase in the magnetic field of the new Orbital Bump (ORBUMP) magnets in the Booster. The magnet is secured in a vacuum box and the core is made up of 0.127 mm thick, low carbon steel laminations with a C-5 inorganic coating. The core is clamped using external tie bars welded to the core end plates. ANSYS Finite Element Analysis (FEA) was used to evaluate the clamping design to minimize the deflection of the core post welding of the tie bars. The water-cooled single turn coil is electrically isolated from the core using virgin PEEK insulating material in the gap. An investigation into the high voltage performance of the virgin PEEK insulator was conducted. The design of the coil which shapes the magnetic field by acting as the pole tips is critical for the integrated field homogeneity. The coil manufacturing tolerances and fabrication techniques were evaluated to ensure the magnetic properties of the magnet could be obtained. The ORBUMP magnet mechanical design is presented in this paper.

Karas, Dino [Fermilab] (ORCID:0000000304340670)↗
NASA NTRS1978

Definition study for variable cycle engine testbed engine and associated test program

The product/study double bypass variable cycle engine (VCE) was updated to incorporate recent improvements. The effect of these improvements on mission range and noise levels was determined. This engine design was then compared with current existing high-technology core engines in order to define a subscale testbed configuration that simulated many of the critical technology features of the product/study VCE. Detailed preliminary program plans were then developed for the design, fabrication, and static test of the selected testbed engine configuration. These plans included estimated costs and schedules for the detail design, fabrication and test of the testbed engine and the definition of a test program, test plan, schedule, instrumentation, and test stand requirements.

Vdoviak, J. W.↗
NASA NTRS2006

Design and Testing of Space Telemetry SCA Waveform

A Software Communications Architecture (SCA) Waveform for space telemetry is being developed at the NASA Glenn Research Center (GRC). The space telemetry waveform is implemented in a laboratory testbed consisting of general purpose processors, field programmable gate arrays (FPGAs), analog-to-digital converters (ADCs), and digital-to-analog converters (DACs). The radio hardware is integrated with an SCA Core Framework and other software development tools. The waveform design is described from both the bottom-up signal processing and top-down software component perspectives. Simulations and model-based design techniques used for signal processing subsystems are presented. Testing with legacy hardware-based modems verifies proper design implementation and dynamic waveform operations. The waveform development is part of an effort by NASA to define an open architecture for space based reconfigurable transceivers. Use of the SCA as a reference has increased understanding of software defined radio architectures. However, since space requirements put a premium on size, mass, and power, the SCA may be impractical for today s space ready technology. Specific requirements for an SCA waveform and other lessons learned from this development are discussed.

Mortensen, Dale J.↗
DOE OSTI2017

Thermal Modeling of the Injection of Standard and Thermally Insulated Cored Wire

Cored wire injection is a widespread method used to perform alloying additions during ferrous and non-ferrous liquid metal treatment. The wire consists of a metal casing that is tightly wrapped around a core of material; the casing delays the release of the material as the wire is immersed into the melt. This method of addition presents advantages such as higher repeatability and yield of cored material with respect to bulk additions. Experimental and numerical work has been performed by several authors on the subject of alloy additions, spherical and cylindrical geometries being mainly considered. Surprisingly this has not been the case for cored wire, where the reported experimental or numerical studies are scarce. This work presents a 1-D finite volume numerical model aimed for the simulation of the thermal phenomena which occurs when the wire is injected into a liquid metal bath. It is currently being used as a design tool for the conception of new types of cored wire. A parametric study on the effect of injection velocity and steel casing thickness for an Al cored wire immersed into a steel melt at 1863 K (1590 °C) is presented. The standard single casing wire is further compared against a wire with multiple casings. Numerical results show that over a certain range of injection velocities, the core contents’ release is delayed in the multiple casing when compared to a single casing wire.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Optimization study of B4C filter thickness for shifting to fast spectrum at experimental position in NRAD core

The Japan Atomic Energy Agency (JAEA) has investigated an accelerator-driven system (ADS) to transmute minor actinides (MAs) partitioned from the high level waste. In the nuclear transmutation system such as the ADS, the nuclear data validation of MA is required to reduce the uncertainty caused by the nuclear data of MA. In order to validate the nuclear data, many independent experimental data need to be mutually compared. The Idaho National Laboratory (INL) considers the measurement of fission rate ratio and sample worth with a wide spectral indices by inserting several types of thermal neutron shielding filters in the experimental position in Neutron RADiography (NRAD) which is the thermal neutron reactor. The JAEA has a plan to perform integral experiments with fission chambers in the NRAD because of the expansion of the experimental data contributing to nuclear data validation of MA. In this study, the optimization of the NRAD core configuration, the B4C filter thickness, and the experimental position design was conducted to acquire the high-accuracy and the beneficial experimental data by using MCNP 6.1 and ENDF/B-VII.1. First, by locating the experimental position as close to the center of the core as possible and concentrating the fuel around that position, the neutron flux of the optimized model could be constructed 2.5 times as much as that of the previous model. Second, the optimized B4C filter thickness was determined to be 3mm based on the comprehensive evaluation from the viewpoints of the shielding ability of low energy neutrons, the level of the total neutron flux, and the influence of fabrication accuracy of the B4C filter. Third, we constructed the experimental position model that could further reduce the influence of the low energy neutrons by adopting the aluminum dry box and the bottom filter. Moreover, the neutron energy spectrum of the tentative optimized model constructed by following the above results was compared with that of the fast neutron reactors such as the ADS and the Fast Critical Assembly (FCA). As a result, the tentative optimized model would be able to be obtained the beneficial experimental data for the verification of FCA-IX series data and the validation of MA nuclear data for accuracy improvement of ADS design. Furthermore, the adoption of the tentative optimized model would be acquired the experimental data such as fission reaction rate and sample worth with the wider spectral indices than the previous one because the tentative optimized model would be able to increase the ratio of the fast neutrons by almost completely eliminating the effect of the thermal neutrons.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1990

Advanced Mach 3.5 Axisymmetric Quiet Nozzle

To advance boundary-layer stability and transition research and to ultimately provide reliable predictions of transition for supersonic flight vehicles, a wind tunnel is required with very low stream disturbance levels comparable to free flight conditions. Experimental and theoretical research to develop a low-disturbance supersonic wind tunnel has achieved a breakthrough. A new concept for nozzle design is presented which promises a large increase in the length of the quiet test core. The Advanced Mach 3.5 Axisymmetric Quiet Nozzle is the first prototype built to prove the new design concept. Experimental results from this new nozzle on the extent of laminar wall boundary layers are compared with data from other nozzles and with theoretical predictions based on linear stability theory. The Reynolds numbers based on the measured length of the quiet test core for this new nozzle are in excellent agreement with the theoretical predictions. The effect of surface finish on the nozzle performance is also discussed.

Chen, Fang-Jenq↗
NASA NTRS2020

Evolution of the Preliminary Fault Management Architecture and Design for the Psyche Mission

The Psyche Mission presents the first opportunity toexplore the largest metal asteroid in the solar system, (16)Psyche, which is believed to be the exposed core of a largerplanetesimal that was stripped of its rocky mantle throughmultiple collisions during early solar system formation. Themission was selected in January 2017 for a 2022 launch as partof NASA’s Discovery Program and is uniquely enabled by theintegration of a Solar Electric Propulsion (SEP) Chassisdelivered by Maxar Space Solutions with JPL’s core deepspace avionics, flight software, and fault managementarchitectures. One of the key design tasks is the development ofa fault management system capable of being responsive to theunique elements of the combined JPL and Maxar spacecraftarchitecture. This new design leverages the strengths of eachorganization, with Maxar delivering its well-proven highvoltage power bus and low-thrust electric propulsionsubsystem from its GEO communications satellite product line,and JPL delivering its deep space mission expertise and thehardware and software most critical to deep space missiondesign. The development of a robust low-thrust mission andthe integration of design philosophies and hardware from twoorganizations is not without its challenges though.A key challenge in the development of the Psyche faultmanagement architecture and design is in the integration ofdesign philosophies and hardware from JPL and Maxar. Atthe architecture level, Maxar GEO communications satellitesare developed under the premise of highly responsive groundin the loop for the resolution of anomalies, and theimplementation takes a fail-operational approach to minimizedown time for its customers. In contrast, a deep space missionmust be able to maintain safety with long periods of groundcommunication outage. Additionally, with no time-criticalevents after launch, the Psyche spacecraft will generally failsafe in the presence of anomalous conditions; specialconsideration is being given to this approach, however, tominimize the loss of electric propulsion thrust time, which iscritical to low-thrust missions. At the hardware level, thedetailed definition of interfaces between JPL and Maxarhardware presents a unique challenge in the development andflowdown of fault management requirements, the developmentand implementation of fault monitors and responses, and thedevelopment and verification of fault containment boundaries.This paper describes the evolution of the Psyche faultmanagement architecture and design from the concept studyinto the preliminary design phase, with a focus on the uniquechallenges associated with flying GEO communicationssatellite hardware in deep space, implementing a robust lowthrust mission, and the integration of design philosophies andhardware from JPL and Maxar. Details regarding how thesechallenges are addressed in the fault management design inorder to maximize heritage, leverage the strengths of eachorganization, and minimize risk across the design are alsodiscussed.

Marsh, Danielle↗
DOE OSTI2021

Rational design of mechanically robust Ni-rich cathode materials via concentration gradient strategy

Mechanical integrity issues such as particle cracking are considered one of the leading causes of structural deterioration and limited long-term cycle stability for Ni-rich cathode materials of Li-ion batteries. Indeed, the detrimental effects generated from the crack formation are not yet entirely addressed. Here, applying physicochemical and electrochemical ex situ and in situ characterizations, the effect of Co and Mn on the mechanical properties of the Ni-rich material are thoroughly investigated. As a result, we successfully mitigate the particle cracking issue in Ni-rich cathodes via rational concentration gradient design without sacrificing the electrode capacity. Our result reveals that the Co-enriched surface design in Ni-rich particles benefits from its low stiffness, which can effectively suppress the formation of particle cracking. Meanwhile, the Mn-enriched core limits internal expansion and improve structural integrity. The concentration gradient design also promotes morphological stability and cycling performances in Li metal coin cell configuration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Containers for Massive Ensemble of I/O Bound Hierarchical Coupled Simulations

We present our experience using containers to scale up a massive ensemble of coupled I/O bound workloads on the NERSC Cori supercomputer. We describe the design of a hierarchical simulation structure using the Integrated Plasma Simulator (IPS) that enables the flexible execution of coupled simulations at the system, node, and core level using the same coupling abstraction and API. The hierarchical design allows for the node-level execution to be efficiently executed using containers while not impacting the structure of the simulation at the system level. We demonstrate the viability of the approach by presenting experimental results from applications in coupled fusion plasma simulations that illustrate the performance impact of using containers to deploy the node-level workloads, in conjunction with the user mountable XFS file systems to ameliorate the load on the Lustre parallel file system. We also present results from production runs showing the ability of the ensemble simulations to scale to hundreds of Cori Haswell nodes, with little or no overhead.

Elwasif, Wael↗
DOE OSTI2023

Transport Mediating Core–Shell Photocatalyst Architecture for Selective Alkane Oxidation

The high activation barrier of the C-H bond in methane, combined with the high propensity of methanol and other liquid oxygenates toward overoxidation to CO 2 , have historically posed significant scientific and industrial challenges to the selective and direct conversion of methane to energy-dense fuels and chemical feedstocks. Here, we report a unique core-shell nanostructured photocatalyst, silica encapsulated TiO 2 decorated with AuPd nanoparticles (TiO 2 @SiO 2 -AuPd), that prevents methanol overoxidation on its surface and possesses high selectivity and yield of oxygenates even at high UV intensity. This room-temperature approach achieves high selectivity for oxygenates (94.5%) with a total oxygenate yield of 15.4 mmol/g cat ·h at 9.65 bar total pressure of CH 4 and O 2 . The working principles of this core-shell photocatalyst were also systematically investigated. Finally, this design concept was further demonstrated to be generalizable for the selective oxidation of other alkanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

On dysprosium utilisation in multi-main-phase Nd–Dy–Fe–B magnets with core–shell microstructures

The development of high-performance Nd–Dy–Fe–B magnets that minimise the consumption of the scarce rare earth (RE) element Dy remains a major global scientific and technological quest. Here, we designed an alloy microstructure comprising of a uniform Dy-lean core–Dy-rich shell in a series of multi-main-phase (MMP) Nd–Dy–Fe–B magnets. The resulting MMP Dy1 and Dy3 magnets with an overall Dy level of 1 and 3 wt.% possessed values of 0.48 and 0.29 T/wt.% of coercivity increment per unit weight percentage of the Dy addition, respectively. Most importantly, the resulting MMP Dy3 magnet exhibited a high coercivity (2.38 T), an excellent thermal stability of the coercivity (|β| = 0.531%/°C), a high squareness factor (> 95%), all with little diminishment in the remanent magnetisation (1.35 T) and maximum energy product (43.6 MGOe). These properties are superior to the currently available sintered Nd–Dy–Fe–B magnets which utilise higher levels of Dy of 5 wt.%. Via magnetic and multi-scale microstructural characterisation experiments and micromagnetic simulations, the formation of the Dy-lean core–Dy-rich shell microstructure is rationalised via solid-state-diffusion and solution reprecipitation during liquid-phase sintering. The Dy-lean core–Dy-rich shell microstructure and the non-ferromagnetic low-Fe RE-rich grain boundary phase led to the synergistic magnetic performance. This is significant in the context of the MMP Nd–Dy–Fe–B magnets being applied to large-scale production. The present work establishes a pathway for the more sustainable utilisation of Dy in permanent magnets via formation of a uniform core–shell microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Localizing resonant magnetic perturbations for edge localized mode control in KSTAR

An external 3D magnetic perturbation typically drives a resonant response at the rational surfaces from the core to the edge of tokamak plasmas, due to strong mode coupling and amplification. In this paper, we present a method to isolate the edge from core resonant fields using the ideal perturbed equilibrium code and to design an edge-localized resonant magnetic perturbation (RMP) for effective edge localized mode (ELM) control. A robust feature of the edge-localized RMP is the curtailed response to the field at the low-field-side (LFS) midplane, as opposed to typical RMPs which strongly resonate with the LFS fields. This emphasizes the importance of off-midplane coils to improve ELM control without provoking a large core response that could lead to devastating instabilities. The conceptual design of new ELM control coils based on the edge-localized RMP in KSTAR shows how this new insight can be utilized to enhance the efficiency of our ELM suppression capabilities. Simple window-pane coils matching the edge-localized resonant mode structure substantially expand in the ELM suppression window beyond the existing coil. Further optimization using the flexible optimized coils using space-curves code leads to additional enhancement in the edge-localized control.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Potent HIV‑1 protease inhibitors containing oxabicyclo octanol-derived P2-ligands: Design, synthesis, and X‑ray structural studies of inhibitor-HIV-1 protease complexes

Here, we describe here the design, synthesis, and X-ray structural studies of a new class of HIV-1 protease inhibitors containing 8-oxabicyclo[3.2.1]octanol-derived P2 ligands. We investigated the functional effect of these stereochemically defined fused-poly cyclic ligands on enzyme inhibition and antiviral activity in MT-2 cells. The tricyclic core of 8-oxabicyclo[3.2.1]octan-6-ol is designed to interact with the residues in the S2 subsite of HIV-1 protease. The syntheses of the ligands were carried out using the [5+2]-cycloaddition as the key step. Several inhibitors exhibited potent enzyme inhibitory activity. High resolution room-temperature X-ray structures of inhibitor-bound HIV-1 protease were determined. These structures provided important molecular insights for further design and optimization of inhibitor potency.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Medium Voltage Converter Inductor Insulation Design Considering Grid Requirements

Medium voltage (MV) SiC devices facilitate direct (without 50-/60-Hz transformer) connection of the power electronics converter to the MV grid using simple topology. Compared to the insulation design of MV inductors that have been widely used in the power system, the insulation design of the MV converter filter inductors has new challenges. Particularly, the grid impact on insulation requirements on converter filter inductors is rarely discussed. This article introduces the insulation design of a grid-side filter inductor for a 13.8-kV power conditioning system converter. The grid insulation requirements, including the short-duration power frequency overvoltage and the lightning impulse voltage, are considered in the design. To meet the requirements, the layer-to-layer insulation, winding-to-core/ground insulation, the air gap discharge between the winding and the core, the local electric field, as well as the interturn transient voltage distribution are considered. Furthermore, the designed inductors are validated by the 46 kV (>1 min) dc hi-pot test, 12-kV ac partial discharge test, one-hour single-phase converter full rating test, as well as three-phase converter full rating test.

42 ENGINEERING↗
NASA NTRS1981

Development of a solar receiver for an organic Rankine cycle engine

A prototype power conversion assembly (PCA) developed by an American aerospace company is considered. The PCA will be mounted at the focal point of a 12 meter parabolic dish and will produce approximately 20 kW of 3 kHz ac power to a ground-mounted rectifier. The PCA includes a cavity receiver coupled to an organic Rankine cycle engine. The engine working fluid is toluene. The performance goals of the receiver design are to maximize both the thermal efficiency and the heat capacity of the core. The latter goal is desired for stabilizing the PCA operation during intermittent cloud cover. The receiver design is based upon the utilization of a direct-heated copper shell. It was necessary to develop a feasible manufacturing process for assuring a good braze joint between the stainless steel, containing the toluene, and the copper shell.

Haskins, H. J.↗
NASA NTRS1979

Fabrication research for supersonic cruise aircraft

Advanced fabrication and joining processes for titanium and composite materials are being investigated by NASA to develop technology for the Supersonic Cruise Research (SCR) Program. Full-scale structural panels are being designed and fabricated to meet the criteria of an existing integrally stiffened shear panel on the upper wing surface of the NASA YF-12 aircraft. The program consists of laboratory testing and Mach 3 flight service of full-scale structural panels and laboratory testing of representative structural element specimens. Borsic/aluminum honeycomb-core, titanium clad Borsic/aluminum skin-stringer, graphite/PMR-15 polyimide honeycomb-core, and titanium superplastically formed/diffusion bonded panels have been designed, fabricated, and tested. Graphite/LARC-160 polyimide skin-stringer panels have been designed, and fabrication methods are being developed.

Hoffman, E. L.↗
NASA NTRS2015

NASA's Space Launch System Program Update

Hardware and software for the world's most powerful launch vehicle for exploration is being welded, assembled, and tested today in high bays, clean rooms and test stands across the United States. NASA's Space Launch System (SLS) continued to make significant progress in 2014 with more planned for 2015, including firing tests of both main propulsion elements and the program Critical Design Review (CDR). Developed with the goals of safety, affordability, and sustainability, SLS will still deliver unmatched capability for human and robotic exploration. The initial Block 1 configuration will deliver more than 70 metric tons of payload to low Earth orbit (LEO). The evolved Block 2 design will deliver some 130 metric tons to LEO. Both designs offer enormous opportunity and flexibility for larger payloads, simplifying payload design as well as ground and on-orbit operations, shortening interplanetary transit times, and decreasing overall mission risk. Over the past year, every vehicle element has manufactured or tested hardware. An RS-25 liquid propellant engine was hotfire-tested at NASA's Stennis Space Center, Miss. for the first time since 2009 exercising and validating the new engine controller, the renovated A-1 test stand, and the test teams. Four RS-25s will power the SLS core stage. A qualification five-segment solid rocket motor incorporating several design, material, and process changes was scheduled to be test-fired in March at the prime contractor's facility in Utah. The booster also successfully completed its Critical Design Review (CDR) validating the planned design. All six major manufacturing tools for the core stage are in place at the Michoud Assembly Facility in Louisiana, and have been used to build numerous pieces of confidence, qualification, and even flight hardware, including barrel sections, domes and rings used to assemble the world's largest rocket stage. SLS Systems Engineering accomplished several key tasks including vehicle avionics software and hardware build and testing, scale model acoustic and base heating tests. Construction of the Interim Cryogenic Propulsion Stage (ICPS) began. Advanced development provided a look into the future of SLS. Shell buckling knockdown factor testing refined decades-old design margins that added thousands of pounds to rocket payloads. Adaptive manufacturing and structured light scanning development promised to cut the cost and time associated with manufacturing and testing. This paper will provide an overview of the progress made over the past year and provide a glimpse of 2015 milestones and beyond on the way to the first launch in 2018.

May, Todd↗