Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusion equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Diffusion length measurements in bulk and epitaxially grown 3-5 semiconductors using charge collection microscopy

Diffusion lengths and surface recombination velocities were measured in GaAs diodes and InP finished solar cells. The basic techniques used was charge collection microscopy also known as electron beam induced current (EBIC). The normalized currents and distances from the pn junction were read directly from the calibrated curves obtained while using the line scan mode in an SEM. These values were then equated to integral and infinite series expressions resulting from the solution of the diffusion equation with both extended generation and point generation functions. This expands previous work by examining both thin and thick samples. The surface recombination velocity was either treated as an unknown in a system of two equations, or measured directly using low e(-) beam accelerating voltages. These techniques give accurate results by accounting for the effects of surface recombination and the finite size of the generation volume.

Leon, R. P.↗
NASA NTRS1987

Diffusion length measurement in bulk and epitaxially grown III-V semiconductors using charge collection microscopy

Diffusion lengths and surface recombination velocities were measured in GaAs diodes and InP finished solar cells. The basic technique used was charge collection microscopy, also known as electron beam induced current (EBIC). The normalized currents and distances from the pn junction were read directly from the calibrated curves obtained while using the line-scan mode in an SEM. These values were then equated to integral and infinite series expressions resulting from the solution of the diffusion equation with both extended-generation and point-generation functions. This expands previous work by examining both thin and thick samples. The surface recombination velocity was either treated as an unknown in a system of two equations or measured directly using low e(-) beam accelerating voltages. These techniques give accurate results by accounting for the effects of surface recombination and the finite size of the generation volume.

Leon, R. P.↗
DOE OSTI2017

An Integrated Approach to Parameter Learning in Infinite-Dimensional Space

The availability of sophisticated modern physics codes has greatly extended the ability of domain scientists to understand the processes underlying their observations of complicated processes, but it has also introduced the curse of dimensionality via the many user-set parameters available to tune. Many of these parameters are naturally expressed as functional data, such as initial temperature distributions, equations of state, and controls. Thus, when attempting to find parameters that match observed data, being able to navigate parameter-space becomes highly non-trivial, especially considering that accurate simulations can be expensive both in terms of time and money. Existing solutions include batch-parallel simulations, high-dimensional, derivative-free optimization, and expert guessing, all of which make some contribution to solving the problem but do not completely resolve the issue. In this work, we explore the possibility of coupling together all three of the techniques just described by designing user-guided, batch-parallel optimization schemes. Our motivating example is a neutron diffusion partial differential equation where the time-varying multiplication factor serves as the unknown control parameter to be learned. We find that a simple, batch-parallelizable, random-walk scheme is able to make some progress on the problem but does not by itself produce satisfactory results. After reducing the dimensionality of the problem using functional principal component analysis (fPCA), we are able to track the progress of the solver in a visually simple way as well as viewing the associated principle components. This allows a human to make reasonable guesses about which points in the state space the random walker should try next. Thus, by combining the random walker's ability to find descent directions with the human's understanding of the underlying physics, it is possible to use expensive simulations more efficiently and more quickly arrive at the desired parameter set.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1986

Numerical simulation of electrophoresis separation processes

A new Petrov-Galerkin finite element formulation has been proposed for transient convection-diffusion problems. Most Petrov-Galerkin formulations take into account the spatial discretization, and the weighting functions so developed give satisfactory solutions for steady state problems. Though these schemes can be used for transient problems, there is scope for improvement. The schemes proposed here, which consider temporal as well as spatial discretization, provide improved solutions. Electrophoresis, which involves the motion of charged entities under the influence of an applied electric field, is governed by equations similiar to those encountered in fluid flow problems, i.e., transient convection-diffusion equations. Test problems are solved in electrophoresis and fluid flow. The results obtained are satisfactory. It is also expected that these schemes, suitably adapted, will improve the numerical solutions of the compressible Euler and the Navier-Stokes equations.

Ganjoo, D. K.↗
DOE OSTI2017

Specular reflection treatment for the 3D radiative transfer equation solved with the discrete ordinates method

The contribution of this paper relies in the development of numerical algorithms for the mathematical treatment of specular reflection on borders when dealing with the numerical solution of radiative transfer problems. The radiative transfer equation being integro-differential, the discrete ordinates method allows to write down a set of semi-discrete equations in which weights are to be calculated. The calculation of these weights is well known to be based on either a quadrature or on angular discretization, making the use of such method straightforward for the state equation. Also, the diffuse contribution of reflection on borders is usually well taken into account. However, the calculation of accurate partition ratio coefficients is much more tricky for the specular condition applied on arbitrary geometrical borders. This paper presents algorithms that calculate analytically partition ratio coefficients needed in numerical treatments. The developed algorithms, combined with a decentered finite element scheme, are validated with the help of comparisons with analytical solutions before being applied on complex geometries.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1977

Elastic wave propagation in a highly scattering medium - A diffusion approach

The propagation of elastic waves in the moon, where the first seismograms were characterized by the presence of a long coda attributed to strongly scattered waves, is modeled with the aid of the time-dependent equation of radiative transfer. The average energy density as a function of time and space is described by the diffusion equation with linear dissipation on the assumption that all the energy present has been scattered many times and the time and distance scales of the problem are long compared to the scales of the scattering process. Ultrasonic experiments in the laboratory confirm the applicability of the formalism.

Dainty, A. M.↗
DOE OSTI2018

Enhancing statistical moment calculations for stochastic Galerkin solutions with Monte Carlo techniques

Here, we provide a method for enhancing stochastic Galerkin moment calculations to the linear elliptic equation with random diffusivity using an ensemble of Monte Carlo solutions. This hybrid approach combines the accuracy of low-order stochastic Galerkin and the computational efficiency of Monte Carlo methods to provide statistical moment estimates which are significantly more accurate than performing each method individually. The hybrid approach involves computing a low-order stochastic Galerkin solution, after which Monte Carlo techniques are used to estimate the residual. We show that the combined stochastic Galerkin solution and residual is superior in both time and accuracy for a one-dimensional test problem and a more computational intensive two-dimensional linear elliptic problem for both the mean and variance quantities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

Stochastic simulation of reaction-diffusion systems: A fluctuating-hydrodynamics approach

Here, we develop numerical methods for stochastic reaction-diffusion systems based on approaches used for fluctuating hydrodynamics (FHD). For hydrodynamic systems, the FHD formulation is formally described by stochastic partial differential equations (SPDEs). In the reaction-diffusion systems we consider, our model becomes similar to the reaction-diffusion master equation (RDME) description when our SPDEs are spatially discretized and reactions are modeled as a source term having Poisson fluctuations. However, unlike the RDME, which becomes prohibitively expensive for an increasing number of molecules, our FHD-based description naturally extends from the regime where fluctuations are strong, i.e., each mesoscopic cell has few (reactive) molecules, to regimes with moderate or weak fluctuations, and ultimately to the deterministic limit. By treating diffusion implicitly, we avoid the severe restriction on time step size that limits all methods based on explicit treatments of diffusion and construct numerical methods that are more efficient than RDME methods, without compromising accuracy. Guided by an analysis of the accuracy of the distribution of steady-state fluctuations for the linearized reaction-diffusion model, we construct several two-stage (predictor-corrector) schemes, where diffusion is treated using a stochastic Crank-Nicolson method, and reactions are handled by the stochastic simulation algorithm of Gillespie or a weakly second-order tau leaping method. We find that an implicit midpoint tau leaping scheme attains second-order weak accuracy in the linearized setting and gives an accurate and stable structure factor for a time step size of an order of magnitude larger than the hopping time scale of diffusing molecules. We study the numerical accuracy of our methods for the Schlögl reaction-diffusion model both in and out of thermodynamic equilibrium. We demonstrate and quantify the importance of thermodynamic fluctuations to the formation of a two-dimensional Turing-like pattern and examine the effect of fluctuations on three-dimensional chemical front propagation. Furthermore, by comparing stochastic simulations to deterministic reaction-diffusion simulations, we show that fluctuations accelerate pattern formation in spatially homogeneous systems and lead to a qualitatively different disordered pattern behind a traveling wave.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

AutoTandemML: Active Learning Enhanced Tandem Neural Networks for Inverse Design Problems

Inverse design in science and engineering involves determining optimal design parameters that achieve desired performance outcomes, a process often hindered by the complexity and high dimensionality of design spaces, leading to significant computational costs. To tackle this challenge, we propose a novel hybrid approach that combines active learning with Tandem Neural Networks to enhance the efficiency and effectiveness of solving inverse design problems. Active learning allows to selectively sample the most informative data points, reducing the required dataset size without compromising accuracy. We investigate this approach using three benchmark problems: airfoil inverse design, photonic surface inverse design, and scalar boundary condition reconstruction in diffusion partial differential equations. We demonstrate that integrating active learning with Tandem Neural Networks outperforms standard approaches across the benchmark suite, achieving better accuracy with fewer training samples.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

A multiphase electrokinetic flow model for electrolytes with liquid/liquid interfaces

A numerical model for electrokinetic flow of multiphase systems with deformable interfaces is presented, based on a combined level set-volume of fluid technique. A new feature is a multiphase formulation of the Nernst–Planck transport equation for advection, diffusion and conduction of individual charge carrier species that ensures their conservation in each fluid phase. The numerical model is validated against the analytical results of Zholkovskij et al. (2002) [1], and results for the problem of two drops coalescing in the presence of mobile charge carriers are presented. The time taken for two drops containing ions to coalesce decreases with increasing ion concentration.

42 ENGINEERING↗
DOE OSTI2013

Realistic multisite lattice-gas modeling and KMC simulation of catalytic surface reactions: Kinetics and multiscale spatial behavior for CO-oxidation on metal (100) surfaces

A realistic molecular-level description of catalytic reactions on single-crystal metal surfaces can be provided by stochastic multisite lattice-gas (msLG) models. This approach has general applicability, although in this report, we will focus on the example of CO-oxidation on the unreconstructed fcc metal (100) or M(100) surfaces of common catalyst metals M = Pd, Rh, Pt and Ir (i.e., avoiding regimes where Pt and Ir reconstruct). These models can capture the thermodynamics and kinetics of adsorbed layers for the individual reactants species, such as CO/M(100) and O/M(100), as well as the interaction and reaction between different reactant species in mixed adlayers, such as (CO + O)/M(100). The msLG models allow population of any of hollow, bridge, and top sites. This enables a more flexible and realistic description of adsorption and adlayer ordering, as well as of reaction configurations and configuration-dependent barriers. Adspecies adsorption and interaction energies, as well as barriers for various processes, constitute key model input. The choice of these energies is guided by experimental observations, as well as by extensive Density Functional Theory analysis. Model behavior is assessed via Kinetic Monte Carlo (KMC) simulation. We also address the simulation challenges and theoretical ramifications associated with very rapid diffusion and local equilibration of reactant adspecies such as CO. These msLG models are applied to describe adsorption, ordering, and temperature programmed desorption (TPD) for individual CO/M(100) and O/M(100) reactant adlayers. In addition, they are also applied to predict mixed (CO + O)/M(100) adlayer structure on the nanoscale, the complete bifurcation diagram for reactive steady-states under continuous flow conditions, temperature programmed reaction (TPR) spectra, and titration reactions for the CO-oxidation reaction. Extensive and reasonably successful comparison of model predictions is made with experimental data. Furthermore, we discuss the possible transition from traditional mean-field-type bistability and reaction kinetics for lower-pressure to multistability and enhanced fluctuation effects for moderate- or higher-pressure. Behavior in the latter regime reflects a stronger influence of adspecies interactions and also lower diffusivity in the higher-coverage mixed adlayer. We also analyze mesoscale spatiotemporal behavior including the propagation of reaction diffusion fronts between bistable reactive and inactive states, and associated nucleation-mediated transitions between these states. This behavior is controlled by complex surface mass transport processes, specifically chemical diffusion in mixed reactant adlayers for which we provide a precise theoretical formulation. The msLG models together with an appropriate treatment of chemical diffusivity enable equation-free heterogeneous coupled lattice-gas (HCLG) simulations of spatiotemporal behavior. In addition, msLG + HCLG modeling can describe coverage variations across polycrystalline catalysts surfaces, pressure variations across catalyst surfaces in microreactors, and could be incorporated into a multiphysics framework to describe mass and heat transfer limitations for high-pressure catalysis. (C) 2013 Elsevier Ltd. All rights reserved.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Influence of deep levels on the electrical transport properties of CdZnTeSe detectors

Here, we investigated the influence of deep levels on the electrical transport properties of CdZnTeSe radiation detectors by comparing experimental data with numerical simulations based on the simultaneous solution of drift-diffusion and Posisson equations, including the Shockley-Read-Hall model of the carrier trapping. We determined the Schottky barrier heights and the Fermi level position from I-V measurements. We measured the time evolution of the electric field and the electrical current after the application of a voltage bias. We observed that the electrical properties of CZTS are fundamentally governed by two deep levels close to the mid-bandgap - one recombination and one hole trap. We show that the hole trap indirectly increases the mobility-lifetime product of electrons. We conclude that the structure of deep levels in CZTS are favorable for high electrical charge transport.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Correlations of conserved quantities at finite baryon density

Correlations involving the seven conserved quantities, namely energy, baryon number, electric charge, strangeness, and the three components of momentum, give rise to correlations in heavy-ion collisions. Through the utilization of a simple one-dimensional hydrodynamic model, we calculate the evolution of the entire 7×7 matrix of correlations as a function of relative spatial rapidity. This comprehensive analysis accounts for finite baryon density, which results in off-diagonal correlations between the charge-related quantities and the energy-momentum quantities. These correlations in coordinate space are subsequently transformed into correlations in momentum space using statistical weighting. As a result, the entire matrix of correlations is revealed to be highly sensitive to the equation of state, viscosity, and diffusivity.

Equations of state of nuclear matter↗
DOE OSTI2014

Two-dimensional equations of the surface harmonics method for solving problems of spatial neutron kinetics in square-lattice reactors

Two-dimensional time-dependent finite-difference equations of the surface harmonics method (SHM) for the description of the neutron transport are derived for square-lattice reactors. These equations are implemented in the SUHAM-TD code. Verification of the derived equations and the developed code are performed by the example of known test problems, and the potential and efficiency of the SHM as applied to the solution of the time-dependent neutron transport equation in the diffusion approximation in two-dimensional geometry are demonstrated. These results show the substantial advantage of SHM over direct finite-difference modeling in computational costs.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Predictive Integrated Modeling of Heated Tokamak Plasmas (Final Technical Report)

The research carried out by the Lehigh University fusion group during this reporting period: (1) Self-consistent predictive core-pedestal ITER scenario modeling; (2) Microtearing instabilities and electron thermal transport in standard and spherical tokamak discharges; (3) Neural network model of the Multi-Mode anomalous transport module; (4) Anomalous transport in KSTAR, JET, EAST, Alcator C-Mod and DIII-D discharges; (5) Theory for transport in magnetized plasmas; (6) Control-oriented modeling of the q-profile dynamic response in preparation for advanced scenario control in KSTAR and in EAST; (7) Modeling of edge harmonic oscillation in DIII-D QH mode discharges; (8) Elucidating plasma dynamics in Hasegawa-Wakatani turbulence by information geometry; (9) Non-linear Langevin and Fractional Fokker–Planck equations for anomalous diffusion by Levy stable processes; and (10) Investigation of the plasma shaping effects on the H-mode pedestal structure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Integration of Electromagnetic Geophysics Forward Simulation in Coupled Flow and Geomechanics for Monitoring a Gas Hydrate Deposit Located in the Ulleung Basin, East Sea, Korea

We investigate the feasibility of electromagnetic (EM) geophysics methods to detect the dissociation of gas hydrate specifically from a gas hydrate deposit located in the Ulleung Basin, East Sea, Korea via an integrated flow-geomechanics-EM geophysics simulation. To this end, coupled flow and geomechanics simulation is first performed with the multiple porosity model employed, where a mixed formulation with the finite volume (FV) and finite element (FE) methods are taken for the flow and geomechanics, respectively. From the saturation and porosity fields obtained from the coupled flow and geomechanics, the electrical conductivity model is established for the EM simulation. Solving the partial differential equation of electrical diffusion which is linearized using the 3D finite element method (FEM), the EM fields are then computed. For numerical experiments, particularly two approaches in the configuration for the EM methods are compared in this contribution: the surface-to-surface and the surface-to-borehole methods. When the surface-to-surface EM method is employed, the EM is found to be less sensitive, implying low detectability. Especially for the short term of production, the low detectability is attributed to the similarity of electrical resistivity between the dissociated gas (CH4) and hydrate as well as the specific dissociation pattern within the intercalated composites of the field. On the other hand, when the surface-to-borehole EM method is employed, its sensitivity to capture the produced gas flow is improved, confirming its detectability in monitoring gas flow. Hence, the EM geophysics simulation integrated with coupled flow and geomechanics can be a potential tool for monitoring gas hydrate deposits.

depressurization↗
DOE OSTI2017

Rosseland and Flux Mean Opacities for Compton Scattering

Rosseland mean opacity plays an important role in theories of stellar evolution and X-ray burst models. In the high-temperature regime, when most of the gas is completely ionized, the opacity is dominated by Compton scattering. Our aim here is to critically evaluate previous works on this subject and to compute the exact Rosseland mean opacity for Compton scattering over a broad range of temperature and electron degeneracy parameter. We use relativistic kinetic equations for Compton scattering and compute the photon mean free path as a function of photon energy by solving the corresponding integral equation in the diffusion limit. As a byproduct we also demonstrate the way to compute photon redistribution functions in the case of degenerate electrons. We then compute the Rosseland mean opacity as a function of temperature and electron degeneracy and present useful approximate expressions. We compare our results to previous calculations and find a significant difference in the low-temperature regime and strong degeneracy. We then proceed to compute the flux mean opacity in both free-streaming and diffusion approximations, and show that the latter is nearly identical to the Rosseland mean opacity. We also provide a simple way to account for the true absorption in evaluating the Rosseland and flux mean opacities.

79 ASTRONOMY AND ASTROPHYSICS↗