Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distributed temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Radial acceleration of ions during adiabatic expansion of a multicomponent cylindrical plasma

The methods of modern group analysis allow an analytic solution of the Cauchy problem to be constructed for the system of kinetic equations for a fully ionised electron – ion plasma, describing the acceleration of ions during the adiabatic expansion of a cylindrical plasma. Time and spatial dependences of the distribution functions of particles are obtained and their integral characteristics, such as density, average velocity, temperature, and energy spectrum, are found. The formation of the energy spectrum of accelerated ions, asymptotically repeating the spatial distribution of their density, and the cooling of electrons in the process of ion acceleration are analytically described. Particular attention is paid to the investigation of the influence of the heavy ionic component on the dynamics of the light component. The features of ion acceleration in the case of a two-temperature electron distribution function that describes the presence of hot and cold electron components are studied, which corresponds to the typical conditions of the experiment on plasma heating by intense laser radiation. (paper)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Multiplexable intrinsic Fabry-Pérot interferometers inscribed by femtosecond laser for vibration measurement in high temperature environments

This article reports fabrication technique and demodulation algorithm developments to use multiplexable intrinsic Fabry-Pérot interferometer (IFPI) fiber sensor array for distributed vibration measurements at high temperatures. Using femtosecond laser direct writing scheme, IFPI array were fabricated through laser-induced Type II scattering points in single mode fiber cores. Reflection spectra of IFPI array were demodulated in real-time using modified Bunemen frequency analysis. The demodulation algorithm, which was implemented using a photodetector-array spectrometer, achieves 64-nε dynamic strain resolution at 1-kHz spectral acquisition rate and 2-kHz maximum vibration bandwidth. Performance and stabilities of IFPI sensor array were characterized from room temperatures to 800 °C. The static strain resolution was 0.6 με and the minimum detectable dynamic strain amplitude was 23 nε/√Hz at 800 °C. The multiplex performance was also tested by measuring dynamic strain in time domain through six IFPI sensor array fabricated in one fiber. This paper presents an integrated and low-cost sensing solution to perform distributed vibration measurements in harsh environments.

42 ENGINEERING↗
DOE OSTI2017

Elucidating the Formation Mechanisms of Silver Nanoparticles from a Comprehensive Simulation Based on First-Principles Calculations

The nucleation and growth of silver nanoparticles are modeled and simulated based on first-principles calculations. The formation energy of single-crystal and multiply twinned particles is calculated to elucidate the thermodynamic properties of particles and modeled as a function of geometric parameters. On the basis of the calculated formation energy and the molecular collision theory, Kinetic Monte Carlo simulations are performed to trace the formation process of silver nanoparticles. In particular, the temporal change of size distribution and morphology are obtained and used to elucidate the governing mechanism in each stage of the formation process. It is demonstrated that the formation process is separated into four phases depending on the power-law time dependence of the particle formation and they are characterized by the size difference between coalescent particles. The temperature dependence of size distribution and morphology is also studied to elucidate the underlying mechanisms. The findings are compared with classical theories quantitatively and a strategy to control the morphology of silver nanoparticles is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment

Highlights: • Study of usefulness of stored strain energy distribution map of the material for variable temperature range. • Advantage of using stored strain energy distribution map • Variation observed in stored energy between isothermal annealing treatment and interrupted annealing treatment. - Abstract: This research work is an attempt to understand the effect of stored strain energy heterogeneity over macro-scale, induced during interrupted annealing treatment, on the micro structural evolution in a heavily cold rolled AISI 304L austenitic stainless steel. The cold rolled AISI 304L stainless steel (SS) samples were subjected to different annealing treatments. The microstructures obtained after each annealing treatment were characterized using optical and electron microscopy techniques. Further, an attempt was made to estimate the stored strain energy by a novel approach of micro hardness measurement both over small scale (area 3600 μm{sup 2}) and large scale (area ~0.25 mm{sup 2}). The stored strain energy was determined using hardness values. Using these data, spatial stored strain energy distribution contour maps were created. They were, in turn, used to characterize the local softening behavior both at micro and macro-scale levels after each interrupted annealing treatment. The results showed that, interrupted annealing treatment induces increased stored strain energy heterogeneity after each annealing interruptions. Also, it was possible to determine recrystallization kinetics of the material using stored strain energy map, which helps in designing annealing cycles for achieving ultrafine grained microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

NPFTURBULENCE: Fast Response Temperature by Airborne Measurements

The original data were collected during the field campaign of the “Turbulent layers promoting New Particle Formation” experiment (NPFTURBULENCE; https://www.arm.gov/research/campaigns/aaf2024npfturbulence; https://www.arm.gov/publications/programdocs/doe-sc-arm-25-004.pdf ) over the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Atmospheric Observatory (https://www.arm.gov/capabilities/observatories/sgp ) in north-central Oklahoma. The ARM Aerial Facility ArcticShark uncrewed aerial system (UAS, https://www.arm.gov/capabilities/observatories/aaf/uas) was based at Blackwell–Tonkawa Municipal Airport (IATA: BWL, ICAO: KBKN, FAA LID: BKN, 36.74475° N, 97.34918° W, 313.9 m MSL), for the field campaign from May 5 through May 29, 2024. The ArcticShark UAS performed 11 flights, including 10 research flights over the Central Facility of the ARM SGP to measure atmospheric state, turbulence, surface IR temperature and imagery, aerosol number concentration and size distribution. The current dataset presents fast response temperature in the atmospheric boundary layer and lower free troposphere measured on the airborne platform throughout the field campaign. The primary instruments used to create the current dataset were the fine wire thermocouple probe, Pitot-static system (part of the UAS control), and infrared gas analyzer sensor for H2O and CO2 (LI-840A). All parameters used in the temperature calculations (static and dynamic pressure, absolute humidity in form of dew point temperature) were included in the data set. For user convenience, one additional parameter was also included: the type of flight flag (level, up, down, turn, and combination of thereof).

Air temperature↗
DOE OSTI2018

Effects of Annealing Temperature and Compaction Pressure on Magnetic Properties of Fe–Si Powder Cores Fabricated by an Improved Bluing Method

Fe-6.5wt%Si soft magnetic powder cores were prepared by using an improved bluing insulation method. A high-quality oxide insulation layer with good temperature stability was found to distribute continuously in the intervals between the Fe–Si particles. The effects of the annealing temperature and the compaction pressure on the core’s magnetic properties were investigated in detail. It was found that high temperature and low compaction pressure are beneficial to decrease the core’s inner stress and high compaction pressure is helpful to reduce the air gap. All the variations of the magnetic performance for the powder cores discussed in this paper were explained reasonably by considering these two factors. From the point of view of low loss, 760 °C and 2090 MPa were confirmed to be the relatively best annealing temperature and compaction pressure, respectively. The μ{sub e}, the % μ{sub e} at 100 Oe, and the loss at 50 kHz/1000 Gs for the core prepared under these two conditions are 63.57, 72.82%, and 547.66 mW/cm{sup 3}, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Mechanisms underpinning the ultrahigh piezoelectricity in Sm-doped 0.705Pb(Mg 1/3 Nb 2/3 )O 3 -0.295PbTiO 3 : Temperature-induced metastable local structure and field-induced polarization rotation

The solid solution of (100 – x )%Pb(Mg 1/3 Nb 2/3 )O 3 - x %PbTiO 3 (PMN- x PT) exhibits ultrahigh piezoelectric and dielectric properties near the morphotropic phase boundary compositions and, as such, has been extensively studied in recent years. Recently, 2.5 mol. % Sm-doped PMN-29PT polycrystalline ceramics were reported to possess the highest piezoelectric coefficients (~1500 pC/N) among all reported piezoceramics, but the atomic-scale mechanisms for such high piezoelectric properties are not yet clear. Here, in situ X-ray diffraction and X-ray total scattering measurements during the application of an electric field, together with in situ total scattering measurement at different temperatures, were conducted for 2.5 mol. % Sm-doped PMN-29.5PT (2.5Sm-PMN-29.5PT). Both the largest field-induced strain and the piezoelectric response were found in the crystallites oriented with their &#12296 100 &#12297 PC directions parallel to the applied field. The local Pb displacement was analyzed using the reverse Monte Carlo method based on the pair distribution functions at different temperatures, where a temperature-induced directional change of Pb displacement was observed. Based on the experimental observations, a field-induced polarization rotation is suggested to be the dominant mechanism for the ultrahigh piezoelectricity of the 2.5Sm-PMN-29.5PT ceramic, while the ease of polarization rotation is possibly attributed to the temperature-induced metastable local monoclinic symmetries with their polar axes close to &#12296 111 &#12297 PC .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Projected Changes in Temperature and Precipitation Over the United States, Central America, and the Caribbean in CMIP6 GCMs

The Coupled Model Intercomparison Project Phase 6 (CMIP6) dataset is used to examine projected changes in temperature and precipitation over the United States (U.S.), Central America and the Caribbean. The changes are computed using an ensemble of 31 models for three future time slices (2021–2040, 2041–2060, and 2080–2099) relative to the reference period (1995–2014) under three Shared Socioeconomic Pathways (SSPs; SSP1-2.6, SSP2-4.5, and SSP5-8.5). The CMIP6 ensemble reproduces the observed annual cycle and distribution of mean annual temperature and precipitation with biases between – 0.93 and 1.27 °C and – 37.90 to 58.45%, respectively, for most of the region. However, modeled precipitation is too large over the western and Midwestern U.S. during winter and spring and over the North American monsoon region in summer, while too small over southern Central America. Temperature is projected to increase over the entire domain under all three SSPs, by as much as 6 °C under SSP5-8.5, and with more pronounced increases in the northern latitudes over the regions that receive snow in the present climate. Annual precipitation projections for the end of the twenty-first century have more uncertainty, as expected, and exhibit a meridional dipole-like pattern, with precipitation increasing by 10–30% over much of the U.S. and decreasing by 10–40% over Central America and the Caribbean, especially over the monsoon region. Seasonally, precipitation over the eastern and central subregions is projected to increase during winter and spring and decrease during summer and autumn. Over the monsoon region and Central America, precipitation is projected to decrease in all seasons except autumn. The analysis was repeated on a subset of 9 models with the best performance in the reference period; however, no significant difference was found, suggesting that model bias is not strongly influencing the projections.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

High-temperature Pumping of Silicon for Thermal Energy Grid Storage

As the cost of renewable energy falls below fossil fuels, the key barrier to widespread sustainable electricity has become availability on demand. Energy storage can enable dispatchable renewables, but only with drastic cost reductions compared to current batteries. One electricity storage concept that could enable these cost reductions stores electricity as sensible heat in an extremely hot liquid (>2000 °C) and uses multi-junction photovoltaics (MPV) as a heat engine to convert it back to electricity on demand, hours or days later. This paper follows previously reported technoeconomics and liquid containment, examining equipment that would be needed to exchange heat between resistive heaters, a molten silicon storage tank above 2000 °C, and a heat engine. Herein, we report on a pump that was designed and tested to circulate the liquid silicon between these three regions and the effect of spatial thermal cycling was simulated in models and experiments. While the pump successfully circulated silicon between 1800-2080 °C for ten hours, circulation with a temperature gradient caused it and other non-isothermal experiments to dissolve significantly due to the temperature dependent solubility of not only carbon, but also silicon carbide which otherwise protected the graphite infrastructure. Furthermore, methods to reduce dissolution and an alternative embodiment are presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2019

Vibrational modes and quantum zero-point energy of hydrogen in ZrH 0.0155 and ZrH 2

We report on an inelastic neutron scattering study of the proton dynamics in ZrH 0.0155 and ε-ZrH 2 . In particular, we present measurements of the incoherent dynamic structure factor, generalized vibrational density of states, and proton momentum distribution of these two materials. Our results are generally consistent with theoretical predictions of Elsässer et al. [Mat. Res. Soc. Symp. Proc. 453 221–226 (1997)]. They argued that the effective Born-Oppenheimer potential experienced by the hydrogen atoms in ε-ZrH 2 is nearly isotropic and harmonic at energies below 0.3 eV, but becomes anisotropic and anharmonic for higher energies. At low temperatures, the proton momentum distribution is dominated by the quantum-mechanical ground state of the protons. We find that it assumes a Gaussian shape, consistent with the concept that the potential surface is approximately harmonic for small displacements of the hydrogen atoms. However, the anharmonicity of the potential becomes readily apparent in the excited states of the hydrogen atoms, as the harmonic approximation breaks down in the description of the multiphonon bands.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Temperature-dependent ordering phenomena in single crystals of germanium antimony tellurides

The temperature-dependent behavior of quenched single-crystalline (GeTe){sub n}Sb{sub 2}Te{sub 3} (n~2.8, n~5 and n~11) was investigated by semiquantitative modeling of diffuse X-ray scattering. The structure at room temperature exhibits trigonal twin domains, each comprising a stacking-disordered sequence of distorted rocksalt-type slabs with variable thicknesses. Ge and Sb share the cation position and vacancies are partially ordered in defect layers (van der Waals gaps) between the slabs. The average structure determined with resonant diffraction data corresponds to a rocksalt-type structure whose cation position is split along the stacking direction. Upon heating, cation ordering leads to a metastable superstructure of the rocksalt type at ~400 °C, which transforms to a rocksalt-type high-temperature phase with randomly distributed cations and vacancies at ~500 °C; this structure was also refined using resonant diffraction. Cooling at high or intermediate rates does not yield the long-range ordered phase, but directly leads to the twinned disordered phase. - Graphical abstract: Development of the diffraction patterns of (GeTe){sub ~11}Sb{sub 2}Te{sub 3} upon heating; the insets symbolically sketch the real structure at the corresponding temperatures. - Highlights: • The structure of disordered (GeTe){sub n}Sb{sub 2}Te{sub 3} is described as a function of temperature. • Structural changes are tracked by modeling diffuse X-ray scattering. • Quenched crystals exhibit distorted NaCl-type slabs with different thicknesses. • Vacancy ordering upon heating leads to a metastable superstructure of the NaCl type. • Further heating leads to an undistorted disordered NaCl-type high-temperature phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Influence of the number of orientational domains on avalanche criticality in ferroelastic transitions

In this work, we study the relationship between avalanche criticality and the number of orientational domains in ferroelastic transitions. To this end, we use a general Ginzburg-Landau model appropriate for displacive transitions of the square lattice. The model includes disorder as a quenched distribution of local transition temperatures. We focus on the square-to-rectangle and the square-to-oblique ferroelastic transitions, which have two and four orientational domains, respectively, which in turn determine the corresponding degeneracy of the ground state of the system. The phase transitions are driven by temperature under the assumption of a strict athermal behavior. That is, we assume that thermal fluctuations do not play any role. Numerical results are obtained using a purely relaxational dynamics, and it is shown that both the square-to-rectangle and the square-to-oblique transitions occur intermittently in the form of avalanches. Avalanche sizes and avalanche energies are found to display power-law distributions, which corroborates avalanche criticality. We compare and contrast the dependence of avalanche criticality on the number of orientational domains of the low-symmetry phase. It is found that the critical exponents depend on that number, in agreement with recent experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Wireless Instrumented RB Experiment Preliminary Design and Analysis

The ability to deploy new nuclear fuels for current or future reactor concepts requires carefully designed experiments to generate data to support fuel qualification. Ideally these experiments would include state of-the-art sensing to maximize the amount of in situ data that can be collected during operation. Furthermore, advanced reactor systems can take advantage of integrated in-core sensing technologies to maximize fuel utilization, reduce unnecessary conservativism in design margins, and improve operator’s understanding of limiting peaking factors. Before any novel sensing technologies can be readily adopted for nuclear applications, they must first demonstrate acceptable performance in test reactors. This report summarizes the preliminary design and analysis of the most highly instrumented irradiation experiment ever performed in the removable beryllium (RB) positions of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). The Wireless Instrumented RB Experiment 2021 (WIRE-21) will test a wide range of sensors including wireless sensors being developed by Westinghouse Electric Company (WEC) that could provide in situ measurements of peak fuel temperatures and fuel rod pressurization due to fission gas release. The ability to wirelessly transmit a signal through the fuel rod’s cladding is critical to improving fuel monitoring capabilities without requiring signal penetrations through the cladding pressure boundary, which would significantly impact fuel fabrication, handling, and operation. Other sensors that will be tested in WIRE-21 include an array of thermocouples, self-powered neutron detectors (SPNDs), and spatially distributed fiber-optic temperature sensors. More generally, WIRE-21 will establish a flexible irradiation vehicle design to allow accelerated, economical testing of advanced sensor technologies while leveraging the extremely high neutron flux that is available in HFIR. This report summarizes the mechanical design for WIRE-21, the experimental test matrix, initial neutronic and thermal design analyses, and the active monitoring and control system enhancements necessary to support testing of advanced sensor technologies. The containment for WIRE-21 is similar to previous RB irradiation vehicles but includes a few modifications, most notably the use of integrated compression seals to pass a larger number of sensor leads through the experiment’s pressure boundary. In addition to the sensor leads, inert gas lines are passed into the experiment to enable active temperature control and the ability to pneumatically actuate a bellows-driven pressure sensor. WIRE-21 is targeting temperatures (300–350°C) and neutron fluence levels (~10 22 n/cm 2 ) relevant to light water reactors (LWRs), but the flexible design of the experiment vehicle allows much higher operating temperatures (>1,100°C). Neutronic calculations determine the neutron flux conditions as well as the nuclear heating within the experiments. These results are used as inputs to detailed thermal finite element calculations, which are required to evaluate the complex, three-dimensional heat transfer that occurs within WEC’s wireless sensor enclosures. Initial results show that the temperatures of the sensors’ enclosures and the metal bellows can be operated near the temperature range of LWR coolants and cladding while simultaneously increasing the temperature of a surrogate fuel material to values in the range of 800–1200°C to simulate centerline fuel temperatures during LWR operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Assessing plasma face component thermal response to rotating 3D magnetic fields for SPARC tokamak

Thermal response simulations of plasma-facing components (PFCs) in the SPARC tokamak, performed with the HEAT code, show that three-dimensional (3D) heat loads resulting from stationary n=1 perturbations require highly radiative scenarios, with up to 95% of the power crossing the separatrix (P SOL ) being radiated, to maintain PFC temperatures within acceptable operational limits, whereas the application of slowly rotating 3D fields substantially reduces the thermal loads. The HEAT module, developed to predict heat loads from non-axisymmetric plasmas, is extended to model time-dependent heat flux patterns generated by rotating 3D fields, and a comprehensive thermal analysis is performed on PFCs subjected to both the maximum and minimum power loads, as well as to rotating heat flux distributions, to evaluate the temperature evolution for varying perturbation amplitudes and rotation frequencies. The extension of this analysis to 3D fields with toroidal mode number n=2 shows that this configuration leads to weaker localized heat flux peaks relative to the n=1 case, enabling safe operation with less than 80% of the power radiated when static 3D fields of low amplitude are applied, while using slowly rotating fields at higher amplitudes. These results indicate that n=2 perturbations are generally less detrimental to divertor power exhaust, emphasizing the strong dependence of divertor power exhaust on the characteristics of the applied 3D fields.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Multi-delay coherence imaging spectroscopy optimized for ion temperature measurements in the divertor plasma of the Wendelstein 7-X stellarator

A new coherence imaging spectroscopy (CIS) diagnostic optimized to measure the C 2+ impurity ion temperature T i spatial distribution in the divertor plasma of the W7-X stellarator is designed, tested, and validated. Using CIS to obtain T i in the edge of magnetically confined plasmas has historically been challenging because Doppler broadening and Zeeman splitting have comparable effects on the shape of spectral emission lines. To distinguish between these two mechanisms, a novel approach to birefringent crystal design is employed to minimize the diagnostic’s sensitivity to Zeeman splitting. The recently developed pixelated multi-delay CIS approach is also used to obtain four times as much spectral information as traditional CIS approaches. The T i -optimized CIS diagnostic is validated in a long-pulse W7-X plasma by comparison with a high-resolution spectrometer whose sightlines overlap with the CIS field of view. The CIS and spectrometer T i profiles have the same shape and agree to within 10% on average and 25% in the worst case. Images of the T i distribution near the divertor show toroidally elongated bands aligned with the magnetic field, with T i ranging between 10 and 40 eV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Anharmonic exciton dynamics and energy dissipation in liquid water from two-dimensional infrared spectroscopy

Water’s extended hydrogen-bond network results in rich and complex dynamics on the sub-picosecond time scale. In this paper, we present a comprehensive analysis of the two-dimensional infrared (2D IR) spectrum of O–H stretching vibrations in liquid H{sub 2}O and their interactions with bending and intermolecular vibrations. By exploring the dependence of the spectrum on waiting time, temperature, and laser polarization, we refine our molecular picture of water’s complex ultrafast dynamics. The spectral evolution following excitation of the O–H stretching resonance reveals vibrational dynamics on the 50–300 fs time scale that are dominated by intermolecular delocalization. These O–H stretch excitons are a result of the anharmonicity of the nuclear potential energy surface that arises from the hydrogen-bonding interaction. The extent of O–H stretching excitons is characterized through 2D depolarization measurements that show spectrally dependent delocalization in agreement with theoretical predictions. Furthermore, we show that these dynamics are insensitive to temperature, indicating that the exciton dynamics alone set the important time scales in the system. Finally, we study the evolution of the O–H stretching mode, which shows highly non-adiabatic dynamics suggestive of vibrational conical intersections. We argue that the so-called heating, commonly observed within ∼1 ps in nonlinear IR spectroscopy of water, is a nonequilibrium state better described by a kinetic temperature rather than a Boltzmann distribution. Our conclusions imply that the collective nature of water vibrations should be considered in describing aqueous solvation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Volatility Basis Set Distributions and Viscosity of Organic Aerosol Mixtures: Insights from Chemical Characterization Using Temperature-Programmed Desorption–Direct Analysis in Real-Time High-Resolution Mass Spectrometry

Quantitative assessment of gas-particle partitioning of individual components within complex atmospheric organic aerosols (OA) mixtures is critical for predicting and comprehending the formation and evolution of OA particles in the atmosphere. This investigation leverages previously documented data obtained through a temperature programmed desorption - direct analysis in real time – high resolution mass spectrometry (TPD-DART-HRMS) platform. This methodology facilitates the bottom-up construction of volatility basis set (VBS) distributions for constituents found in three biogenic secondary organic aerosol (SOA) mixtures produced through the ozonolysis of a-pinene, limonene, and ocimene. The apparent enthalpies (ΔH*, kJ mol -1 ) and saturated vapor mass concentrations (C T *, µg∙m -3 ) of individual SOA components, determined as a function of temperature (T, K), facilitated an assessment of changes in VBS distributions and gas-particle partitioning with respect to T and atmospheric total organic mass loadings (tOM, µg∙m -3 ). Further, the VBS distributions reveal distinct differences in volatilities among monomers, dimers, and trimers, enabling their categorization into separate volatility bins. At the ambient temperature of T = 298 K, only monomers efficiently partition between gas and particle phases across a broad range of atmospherically relevant total organic mass loadings (tOM) values of 1–100 µg∙m -3 . Partitioning of dimers and trimers becomes notable only at T > 360 K and T > 420 K, respectively. The viscosity of SOA mixtures is assessed using a bottom-up calculation approach, incorporating the input of elemental formulas, ΔH*, C T *, and particle-phase mass fractions of the SOA components. Through this approach, we are able to accurately estimate the variations in SOA viscosity that result from the evaporation of its components. These variations are, in turn, influenced by atmospherically relevant changes in tOM and T. Comparison of the calculated SOA viscosity and diffusivity values with literature reported experimental results shows close agreement, thereby validating the employed calculation approach. These findings underscore the significant potential for TPD-DART-HRMS measurements in enabling the untargeted analysis of organic molecules within OA mixtures. This approach facilitates quantitative assessment of their gas-particle partitioning and allows for the estimation of their viscosity and condensed-phase diffusion, thereby contributing valuable insights to atmospheric models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A quantitative method to decompose SWE differences between regional climate models and reanalysis datasets

Abstract The simulation of snow water equivalent (SWE) remains difficult for regional climate models. Accurate SWE simulation depends on complex interacting climate processes such as the intensity and distribution of precipitation, rain-snow partitioning, and radiative fluxes. To identify the driving forces behind SWE difference between model and reanalysis datasets, and guide model improvement, we design a framework to quantitatively decompose the SWE difference contributed from precipitation distribution and magnitude, ablation, temperature and topography biases in regional climate models. We apply this framework within the California Sierra Nevada to four regional climate models from the North American Coordinated Regional Downscaling Experiment (NA-CORDEX) run at three spatial resolutions. Models generally predict less SWE compared to Landsat-Era Sierra Nevada Snow Reanalysis (SNSR) dataset. Unresolved topography associated with model resolution contribute to dry and warm biases in models. Refining resolution from 0.44° to 0.11° improves SWE simulation by 35%. To varying degrees across models, additional difference arises from spatial and elevational distribution of precipitation, cold biases revealed by topographic correction, uncertainties in the rain-snow partitioning threshold, and high ablation biases. This work reveals both positive and negative contributions to snow bias in climate models and provides guidance for future model development to enhance SWE simulation.

54 ENVIRONMENTAL SCIENCES↗