Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Storing entanglement of nuclear spins via Uhrig dynamical decoupling

Stroboscopic spin flips have already been shown to prolong the coherence times of quantum systems under noisy environments. Uhrig's dynamical decoupling scheme provides an optimal sequence for a quantum system interacting with a dephasing bath. Several experimental demonstrations have already verified the efficiency of such dynamical decoupling schemes in preserving single-qubit coherences. In this work we describe the experimental study of Uhrig's dynamical decoupling in preserving two-qubit entangled states using an ensemble of spin-1/2 nuclear pairs in solution state. We find that the performance of odd-order Uhrig sequences in preserving entanglement is superior to both even-order Uhrig sequences and periodic spin-flip sequences. We also find that there exists an optimal order of the Uhrig sequence in which a singlet state can be stored at high correlation for about 30 seconds.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Task allocation in geo-distributed cyber-physical systems - 256

This paper studies the task allocation algorithm for a distributed test facility (DTF), which aims to assemble geo-distributed cyber (software) and physical (hardware in the loop) components into a prototype cyber-physical system (CPS). This allows low cost testing on an early conceptual prototype (ECP) of the ultimate CPS (UCPS) to be developed. The DTF provides an instrumentation interface for carrying out reliability experiments remotely such as fault propagation analysis and in-situ testing of hardware and software components in a simulated environment. Unfortunately, the geo-distribution introduces an overhead that is not inherent to the UCPS, i.e. a significant time delay in communication that threatens the stability of the ECP and is not an appropriate representation of the behavior of the UCPS. This can be mitigated by implementing a task allocation algorithm to find a suitable configuration and assign the software components to appropriate computational locations, dynamically. This would allow the ECP to operate more efficiently with less probability of being unstable due to the delays introduced by geo-distribution. The task allocation algorithm proposed in this work uses a Monte Carlo approach along with Dynamic Programming to identify the optimal network configuration to keep the time delays to a minimum. (authors)

97 MATHEMATICS AND COMPUTING↗

Insights into Structural Evolution of Lithium Peroxides with Reduced Charge Overpotential in Li–O 2 System

Reducing charge-discharge overpotential is of great significance to enhance efficiency and cyclability of Li–O 2 batteries. Here we successfully achieve dramatically reduced charge overpotential (0.4 V) via a rational design of cathode architecture, which features highly uniform Pt and Pt 3 Co nanocrystals embedding within nitrogen-doped cobalt@graphene heterostructures. Because of the improvement on the catalytic efficiency for optimizing the electrical and dynamic properties, the cathode design enables promising electrochemical performance. More importantly, the results reveal different overpotential prompted by different structural evolution of bulk Li 2 O 2 , which depends on the Pt modification approach (surface-coating and bulk-doping). This dependence is found to be attributed to the influence of Pt nanocomponents and their dispersion on the formation and decomposition mechanism of Li 2 O 2 . Density functional theory calculations provide mechanistic insights into the promotional effect of Pt and Pt 3 Co on the reduction of the charge overpotential. Lastly, an inner relationship between overpotential and electrochemical kinetics is proposed.

25 ENERGY STORAGE↗

Manage OpenMP GPU Data Environment Under Unified Address Space

OpenMP has supported the offload of computations to accelerators such as GPUs since version 4.0. A crucial aspect in OpenMP offloading is to manage the accelerator data environment. Currently, this has to be explicitly programmed by users, which is non-trival and often results in suboptimal performance. The unified memory feature available in recent GPU architectures introduces another option, implicit management. However, our experiments show that it incurs several performance issues, especially under GPU memory oversubscription. In this paper, we propose a compiler and runtime collaborative approach to manage OpenMP GPU data under unified memory. In our framework, the compiler performs data reuse analysis to assist runtime data management. The runtime combines static and dynamic information to make optimized data management decisions.We have implement the proposed technology in the LLVM framework. The evaluation shows our method can achieve significant performance improvement for OpenMP GPU offloading.

97 MATHEMATICS AND COMPUTING↗

Optimal control of systems with discontinuous differential equations.

In this paper we discuss the problem of verifying and computing optimal controls of systems whose dynamics is governed by differential systems with a discontinuous right-hand side. In our work, we are motivated by optimal control of mechanical systems with Coulomb friction, which exhibit such a right-hand side. Notwithstanding the impressive development of nonsmooth and set-valued analysis, these systems have not been closely studied either computationally or analytically. We show that even when the solution crosses and does not stay on the discontinuity, differentiating the results of a simulation gives gradients that have errors of a size independent of the stepsize. This means that the strategy of 'optimize the discretization' will usually fail for problems of this kind. We approximate the discontinuous right-hand side for the differential equations or inclusions by a smooth right-hand side. For these smoothed approximations, we show that the resulting gradients approach the true gradients provided that the start and end points of the trajectory do not lie on the discontinuity and that Euler's method is used where the step size is 'sufficiently small' in comparison with the smoothing parameter. Numerical results are presented for a crude model of car racing that involves Coulomb friction and slip showing that this approach is practical and can handle problems of moderate complexity.

97 MATHEMATICS AND COMPUTING↗

A Type II Hamiltonian Variational Principle and Adjoint Systems for Lie Groups

We present a novel Type II variational principle on the cotangent bundle of a Lie group which enforces Type II boundary conditions, i.e., fixed initial position and final momentum. In general, such Type II variational principles are only globally defined on vector spaces or locally defined on general manifolds; however, by left translation, we are able to define this variational principle globally on cotangent bundles of Lie groups. Type II boundary conditions are particularly important for adjoint sensitivity analysis, which is our motivating application. As such, we additionally discuss adjoint systems on Lie groups, their properties, and how they can be used to solve optimization problems subject to dynamics on Lie groups.

97 MATHEMATICS AND COMPUTING↗

Mass optimization of a supercritical CO 2 Brayton cycle with a direct cooled nuclear reactor for space surface power

A long life, reliable, and compact surface power system will be necessary to achieve future goals in space exploration. This application uniquely requires the system to be optimized with respect to mass because system mass directly drives the space launch cost associated with transporting the system to its desired location. In this study, a supercritical CO 2 Brayton cycle coupled to a direct-cooled nuclear reactor was designed and optimized for mass. Robust models were developed for each Brayton cycle component in order to model the cycle performance. The three most massive components of this cycle are the radiator-based heat rejection system (subsequently referred to as the “radiator”), recuperator, and reactor. Mass correlations for the recuperator and radiator were established through interactions with component experts from industry and national labs. A reactor model was developed to predict the minimum mass reactor that satisfies neutronic and thermal limitations for given cycle conditions. The system optimization explores tradeoffs between the reactor, recuperator, and radiator sizes in order to identify the least massive system that will satisfy the power (40 kWe) and life (10 yr) requirements. To explore the effects of turbine inlet temperature on system mass, three types of microtube and shell recuperator technologies were considered: baseline stainless steel (which is consistent with the industry partner’s current designs), stainless steel with non-heritage tube sizes (which requires further development of manufacturing techniques), and Inconel (which is not a current/legacy design). Both stainless steel designs have a temperature limit of 823 K, which limits the turbine inlet temperature to 900 K. The baseline stainless steel design results in a combined mass of 738 kg. The stainless steel design allowing for non-heritage tube sizes reduces the combined mass to 674 kg (a 9% improvement). The Inconel design leads to an optimal turbine inlet temperature of 1120 K and reduces the combined mass to 391 kg (a 47% improvement). Furthermore, the interesting conclusion from this study include: (1) radiator mass dominates the total mass, and this drives the cycle to relatively high heat rejection temperatures resulting in a compressor inlet state point that is not close to the vapor dome; thus, the typical advantages of an sCO 2 system are not realized, and a working fluid with a higher critical temperature may be more suitable, and (2) neutronic limitations cause the reactor size to be relatively unaffected by the power level.

42 ENGINEERING↗

A compact neutron spectrometer system

A portable neutron spectrometer, nSpec, has been developed for passive interrogation of fast neutrons ( 1 MeV) from neutron sources. The design of the system includes four EJ-301 liquid scintillation cells, a custom stand, and tungsten caps for gamma-ray shielding. Data acquisition settings were optimized to provide a dynamic range of up to > 15 MeV neutron energy. Additionally, the detector response matrix was characterized using a time-of-flight method based on gamma-ray tagged neutron emission from 252 Cf. The spectrum unfolding was characterized using measured and simulated spectra of AmBe and 252 Cf with the GRAVEL and MLEM methods. Monte Carlo methods were used to examine the uncertainty propagation and determine sufficient counts for a measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a compact fast-neutron spectrometer for nuclear emergency response applications

We have developed a Compact Fast Neutron Spectrometer (CFNS) for passive assay of special nuclear material (SNM) through the observation of fast neutrons. The CFNS consists of eight organic glass scintillators (OGS) coupled to silicon photomultipliers and a waveform digitizer, which are integrated within a human-portable box. The CFNS determines the neutron energy profile by spectrum unfolding using the Maximum-Likelihood Expectation Maximization method. The detector acquisition system was optimized to have a dynamic range of up to 10 MeV neutron energy. Bulk special nuclear material (SNM) measurements from the National Criticality Experiments Research Center were analyzed for SNM validation/examination. Additionally, the results show that the CFNS can be used to distinguish between fission and (α, n) neutron emitters, regardless of intervening material type (Cu and polyethylene) and thickness, by taking the ratio of neutron counts at different regions in the unfolded energy spectrum. Additionally, by fitting an exponential curve to the unfolded energy spectrum of PuO 2 and Pu neutron emitters, the CFNS showed the ability of distinguishing between pure Pu oxide, pure Pu metal and mixed oxide-metal configurations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time Matters: A Survival Analysis of Public Electric Vehicle Charging Infrastructure Utilization

The rapid adoption of plug-in electric vehicles (PEVs) places significant demands on public charging infrastructure, making it critical to understand and optimize charger utilization. This study provides one of the most comprehensive analyses of charging behavior to date by applying a survival analysis to a dataset of nearly 16 million level 2 (L2) and direct current (DC) fast charger sessions across the United States from 2017 to 2022. Using Kaplan-Meier curves and log rank tests, our analysis reveals statistically significant and distinct duration patterns influenced by charger type, time of day, and day of the week. We find that L2 charging sessions exhibit high variability tied to venue type, whereas DC sessions are more uniform, typically lasting 30-45 min. This study introduces the operational efficiency score (OES), a metric for standardizing the performance evaluation of charging stations. Our findings offer actionable insights for optimizing charger deployment, developing dynamic pricing strategies to reduce vehicle dwell time, and improving load management for grid operators, ultimately enhancing the efficiency and availability of public charging infrastructure.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Direct experimental evidence for photoinduced strong-coupling polarons in organolead halide perovskite nanoparticles

Echoing the roaring success of their bulk coun-terparts, nano-objects built from organolead halide perov-skites (OLHP) present bright prospects for surpassing the performances of their conventional organic and inorganic analogues in photodriven technologies. Unraveling the pho-toinduced charge dynamics is essential for optimizing OLHP optoelectronic functionalities. However, mapping the carri-er-lattice interactions remains challenging, owing to their manifestations on multiple length scales and time scales. By correlating ultrafast time-resolved optical and X-ray absorp-tion measurements, this work reveals the photoinduced formation of strong-coupling polarons in CH 3 NH 3 PbBr 3 nanoparticles. Such polarons originate from the self-trapping of electrons in the net Coulombic field caused by the dis-placed inorganic nuclei and the oriented organic cations. The transient structural change detected at the Pb L 3 X-ray ab-sorption edge is well captured by a distortion with average bond elongation in the [PbBr 6 ] 2- motif. As a result, general implications for designing novel OLHP nanomaterials targeting the active utilization of these quasi-particles are outlined.

36 MATERIALS SCIENCE↗

Energy Flows in Static and Programmable Catalysts

Programmable catalysts that change on the time scale of a catalytic cycle provide a new opportunity to control the flow of energy to reactants and products to promote faster and more selective chemistry. While traditional chemical manufacturing processes consume energy to achieve favorable reaction conditions, programmable catalysts aim to dynamically add or remove energy to catalytic cycles through perturbations of the catalytic surface via strain, charge, or light. These surface energy flows are quantified by the changes in adsorbate binding energy with time, and the overall efficiency relating energy inputs to catalytic performance is defined by the characteristics of the undulating catalytic surface. Here, understanding and quantifying energy flows in programmable catalysts provides baseline definitions and metrics for comparing dynamic conditions and identifying optimal catalytic performance for more efficient chemical manufacturing.

Binding energy↗

In Situ X-ray Scattering Reveals Coarsening Rates of Superlattices Self-Assembled from Electrostatically Stabilized Metal Nanocrystals Depend Nonmonotonically on Driving Force

Self-assembly of colloidal nanocrystals (NCs) into superlattices (SLs) is an appealing strategy to design hierarchically organized materials with promising functionalities. Mechanistic studies are still needed to uncover the design principles for SL self-assembly, but such studies have been difficult to perform due to the fast time and short length scales of NC systems. To address this challenge, we developed an apparatus to directly measure the evolving phases in situ and in real time of an electrostatically stabilized Au NC solution before, during, and after it is quenched to form SLs using small-angle X-ray scattering. By developing a quantitative model, we fit the time-dependent scattering patterns to obtain the phase diagram of the system and the kinetics of the colloidal and SL phases as a function of varying quench conditions. The extracted phase diagram is consistent with particles whose interactions are short in range relative to their diameter. We find the degree of SL order is primarily determined by fast (subsecond) initial nucleation and growth kinetics, while coarsening at later times depends nonmonotonically on the driving force for self-assembly. We validate these results by direct comparison with simulations and use them to suggest dynamic design principles to optimize the crystallinity within a finite time window. The combination of this measurement methodology, quantitative analysis, and simulation should be generalizable to elucidate and better control the microscopic self-assembly pathways of a wide range of bottom-up assembled systems and architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Engineering the formation of spin-defects from first principles

The full realization of spin qubits for quantum technologies relies on the ability to control and design the formation processes of spin defects in semiconductors and insulators. We present a computational protocol to investigate the synthesis of point-defects at the atomistic level, and we apply it to the study of a promising spin-qubit in silicon carbide, the divacancy (VV). Our strategy combines electronic structure calculations based on density functional theory and enhanced sampling techniques coupled with first principles molecular dynamics. We predict the optimal annealing temperatures for the formation of VVs at high temperature and show how to engineer the Fermi level of the material to optimize the defect’s yield for several polytypes of silicon carbide. Our results are in excellent agreement with available experimental data and provide novel atomistic insights into point defect formation and annihilation processes as a function of temperature.

36 MATERIALS SCIENCE↗

Noise reduction in X-ray photon correlation spectroscopy with convolutional neural networks encoder–decoder models

Abstract Like other experimental techniques, X-ray photon correlation spectroscopy is subject to various kinds of noise. Random and correlated fluctuations and heterogeneities can be present in a two-time correlation function and obscure the information about the intrinsic dynamics of a sample. Simultaneously addressing the disparate origins of noise in the experimental data is challenging. We propose a computational approach for improving the signal-to-noise ratio in two-time correlation functions that is based on convolutional neural network encoder–decoder (CNN-ED) models. Such models extract features from an image via convolutional layers, project them to a low dimensional space and then reconstruct a clean image from this reduced representation via transposed convolutional layers. Not only are ED models a general tool for random noise removal, but their application to low signal-to-noise data can enhance the data’s quantitative usage since they are able to learn the functional form of the signal. We demonstrate that the CNN-ED models trained on real-world experimental data help to effectively extract equilibrium dynamics’ parameters from two-time correlation functions, containing statistical noise and dynamic heterogeneities. Strategies for optimizing the models’ performance and their applicability limits are discussed.

36 MATERIALS SCIENCE↗

Proposal for a graphene-based all-spin logic gate

In this work, we present a graphene-based all-spin logic gate (G-ASLG) that integrates the functionalities of perpendicular anisotropy magnetic tunnel junctions (p-MTJs) with spin transport in graphene-channel. It provides an ideal integration of logic and memory. The input and output states are defined as the relative magnetization between free layer and fixed layer of p-MTJs. They can be probed by the tunnel magnetoresistance and controlled by spin transfer torque effect. Using lateral non-local spin valve, the spin information is transmitted by the spin-current interaction through graphene channels. By using a physics-based spin current compact model, the operation of G-ASLG is demonstrated and its performance is analyzed. It allows us to evaluate the influence of parameters, such as spin injection efficiency, spin diffusion length, contact area, the device length, and their interdependence, and to optimize the energy and dynamic performance. Compared to other beyond-CMOS solutions, longer spin information transport length (∼μm), higher data throughput, faster computing speed (∼ns), and lower power consumption (∼μA) can be expected from the G-ASLG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development and numerical/experimental characterization of a lab-scale flat flame reactor allowing the analysis of pulverized solid fuel devolatilization and oxidation at high heating rates

This paper deals with the thorough characterization of a new experimental test bench designed to study the devolatilization and oxidation of pulverized fuel particles in a wide range of operating conditions. This lab-scale facility is composed of a fuel feeding system, the functioning of which has been optimized by computational fluid dynamics. It allows delivering a constant and time-independent mass flow rate of fuel particles which are pneumatically transported to the central injector of a hybrid McKenna burner using a carrier gas stream that can be inert or oxidant depending on the targeted application. A premixed propane/air laminar flat flame stabilized on the porous part of the burner is used to generate the hot gases insuring the heating of the central coal/carrier-gas jet with a thermal gradient similar to those found in industrial combustors (>10{sup 5} K/s). In the present work, results issued from numerical simulations performed a priori to characterize the velocity and temperature fields in the reaction chamber have been analyzed and confronted with experimental measurements carried out by coupling particle image velocimetry, thermocouple and two-color pyrometry measurements so as to validate the order of magnitude of the heating rate delivered by such a new test bench. Finally, the main features of the flat flame reactor we developed have been discussed with respect to those of another laboratory-scale system designed to study coal devolatilization at a high heating rate.

42 ENGINEERING↗