Search NASA⌕ Search

SEARCH · Search NASA

Results for “EXTRAPOLATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Dynamic Spectral Imaging of Decimetric Fiber Bursts in an Eruptive Solar Flare

Fiber bursts are a type of fine structure that is often superposed on type IV radio continuum emission during solar flares. Although studied for many decades, its physical exciter, emission mechanism, and association with the flare energy release remain unclear, partly due to the lack of simultaneous imaging observations. We report the first dynamic spectroscopic imaging observations of decimetric fiber bursts, which occurred during the rise phase of a long-duration eruptive flare on 2012 March 3, as obtained by the Karl G. Jansky Very Large Array in 1–2 GHz. Our results show that the fiber sources are located near and above one footpoint of the flare loops. The fiber source and the background continuum source are found to be co-spatial and share the same morphology. It is likely that they are associated with nonthermal electrons trapped in the converging magnetic fields near the footpoint, as supported by a persistent coronal hard X-ray source present during the flare rise phase. We analyze three groups of fiber bursts in detail with dynamic imaging spectroscopy and obtain their mean frequency-dependent centroid trajectories in projection. By using a barometric density model and magnetic field based on a potential field extrapolation, we further reconstruct the 3D source trajectories of fiber bursts, for comparison with expectations from the whistler wave model and two MHD-based models. We conclude that the observed fiber burst properties are consistent with an exciter moving at the propagation velocity expected for whistler waves, or models that posit similar exciter velocities.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Slender Ca ii H Fibrils Mapping Magnetic Fields in the Low Solar Chromosphere

A dense forest of slender bright fibrils near a small solar active region is seen in high-quality narrowband Ca ii H images from the SuFI instrument onboard the Sunrise balloon-borne solar observatory. The orientation of these slender Ca ii H fibrils (SCF) overlaps with the magnetic field configuration in the low solar chromosphere derived by magnetostatic extrapolation of the photospheric field observed with Sunrise/IMaX and SDO/HMI. In addition, many observed SCFs are qualitatively aligned with small-scale loops computed from a novel inversion approach based on best-fit numerical MHD simulation. Such loops are organized in canopy-like arches over quiet areas that differ in height depending on the field strength near their roots.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

C{sub 60}{sup +} in diffuse clouds: laboratory and astronomical comparison

The wavelengths of the strongest absorptions in the electronic spectrum of C{sub 60}{sup +} have been determined by experimental investigation into the perturbation caused by the helium in the laboratory spectra of C{sub 60}{sup +}−He{sub n}(n=1--3). The extrapolation of these gives absorption bands of bare C{sub 60}{sup +} at 9348.4, 9365.2, 9427.8, 9577.0, and 9632.1 Å, with ±0.2 Å as the 2σ uncertainty. The laboratory data are compared with the complete set of astronomical observations reported in the literature. The spectral characteristics are found to be in agreement with five diffuse interstellar bands, for which the systematic uncertainties are larger than for the laboratory data.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

LONG-TERM TREND OF SOLAR CORONAL HOLE DISTRIBUTION FROM 1975 TO 2014

We developed an automated prediction technique for coronal holes using potential magnetic field extrapolation in the solar corona to construct a database of coronal holes appearing from 1975 February to 2015 July (Carrington rotations from 1625 to 2165). Coronal holes are labeled with the location, size, and average magnetic field of each coronal hole on the photosphere and source surface. As a result, we identified 3335 coronal holes and found that the long-term distribution of coronal holes shows a similar pattern known as the magnetic butterfly diagram, and polar/low-latitude coronal holes tend to decrease/increase in the last solar minimum relative to the previous two minima.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Fragmentation kinematics in comet 332P/Ikeya-Murakami

We present initial time-resolved observations of the split comet 332P/Ikeya–Murakami taken using the Hubble Space Telescope. Our images reveal a dust-bathed cluster of fragments receding from their parent nucleus at projected speeds in the range 0.06–3.5 m s{sup −1} from which we estimate ejection times from 2015 October to December. The number of fragments with effective radii ≳20 m follows a differential power law with index γ = −3.6 ± 0.6, while smaller fragments are less abundant than expected from an extrapolation of this power law. We argue that, in addition to losses due to observational selection, torques from anisotropic outgassing are capable of destroying the small fragments by driving them quickly to rotational instability. Specifically, the spin-up times of fragments ≲20 m in radius are shorter than the time elapsed since ejection from the parent nucleus. The effective radius of the parent nucleus is r{sub e} ⩽ 275 m (geometric albedo 0.04 assumed). This is about seven times smaller than previous estimates and results in a nucleus mass at least 300 times smaller than previously thought. The mass in solid pieces, 2×10{sup 9} kg, is about 4% of the mass of the parent nucleus. As a result of its small size, the parent nucleus also has a short spin-up time. Brightness variations in time-resolved nucleus photometry are consistent with rotational instability playing a role in the release of fragments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

ON THE MISALIGNMENT BETWEEN CHROMOSPHERIC FEATURES AND THE MAGNETIC FIELD ON THE SUN

Observations of the upper chromosphere show an enormous amount of intricate fine structure. Much of this comes in the form of linear features, which are most often assumed to be well aligned with the direction of the magnetic field in the low plasma β regime that is thought to dominate the upper chromosphere. We use advanced radiative magnetohydrodynamic simulations, including the effects of ion-neutral interactions (using the generalized Ohm’s law) in the partially ionized chromosphere, to show that the magnetic field is often not well aligned with chromospheric features. This occurs where the ambipolar diffusion is large, i.e., ions and neutral populations decouple as the ion-neutral collision frequency drops, allowing the field to slip through the neutral population; where currents perpendicular to the field are strong; and where thermodynamic timescales are longer than or similar to those of ambipolar diffusion. We find this often happens in dynamic spicule or fibril-like features at the top of the chromosphere. This has important consequences for field extrapolation methods, which increasingly use such upper chromospheric features to help constrain the chromospheric magnetic field: our results invalidate the underlying assumption that these features are aligned with the field. In addition, our results cast doubt on results from 1D hydrodynamic models, which assume that plasma remains on the same field lines. Finally, our simulations show that ambipolar diffusion significantly alters the amount of free energy available in the coronal part of our simulated volume, which is likely to have consequences for studies of flare initiation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

ROLE OF THE CORONAL ALFVÉN SPEED IN MODULATING THE SOLAR-WIND HELIUM ABUNDANCE

The helium abundance He/H in the solar wind is relatively constant at ∼0.04 in high-speed streams, but varies in phase with the sunspot number in slow wind, from ∼0.01 at solar minimum to ∼0.04 at maximum. Suggested mechanisms for helium fractionation have included frictional coupling to protons and resonant interactions with high-frequency Alfvénic fluctuations. We compare He/H measurements during 1995–2015 with coronal parameters derived from source-surface extrapolations of photospheric field maps. We find that the near-Earth helium abundance is an increasing function of the magnetic field strength and Alfvén speed v {sub A} in the outer corona, while being only weakly correlated with the proton flux density. Throughout the solar cycle, fast wind is associated with short-term increases in v {sub A} near the source surface; resonance with Alfvén waves, with v {sub A} and the relative speed of α -particles and protons decreasing with increasing heliocentric distance, may then lead to enhanced He/H at 1 au. The modulation of helium in slow wind reflects the tendency for the associated coronal Alfvén speeds to rise steeply from sunspot minimum, when this wind is concentrated around the source-surface neutral line, to sunspot maximum, when the source-surface field attains its peak strengths. The helium abundance near the source surface may represent a balance between collisional decoupling from protons and Alfvén wave acceleration.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Discovery of Scattering Polarization in the Hydrogen Ly α Line of the Solar Disk Radiation

There is a thin transition region (TR) in the solar atmosphere where the temperature rises from 10,000 K in the chromosphere to millions of degrees in the corona. Little is known about the mechanisms that dominate this enigmatic region other than the magnetic field plays a key role. The magnetism of the TR can only be detected by polarimetric measurements of a few ultraviolet (UV) spectral lines, the Ly α line of neutral hydrogen at 121.6 nm (the strongest line of the solar UV spectrum) being of particular interest given its sensitivity to the Hanle effect (the magnetic-field-induced modification of the scattering line polarization). We report the discovery of linear polarization produced by scattering processes in the Ly α line, obtained with the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) rocket experiment. The Stokes profiles observed by CLASP in quiet regions of the solar disk show that the Q / I and U / I linear polarization signals are of the order of 0.1% in the line core and up to a few percent in the nearby wings, and that both have conspicuous spatial variations with scales of ∼10 arcsec. These observations help constrain theoretical models of the chromosphere–corona TR and extrapolations of the magnetic field from photospheric magnetograms. In fact, the observed spatial variation from disk to limb of polarization at the line core and wings already challenge the predictions from three-dimensional magnetohydrodynamical models of the upper solar chromosphere.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Magnetic Nulls and Super-radial Expansion in the Solar Corona

Magnetic fields in the Sun’s outer atmosphere—the corona—control both solar-wind acceleration and the dynamics of solar eruptions. We present the first clear observational evidence of coronal magnetic nulls in off-limb linearly polarized observations of pseudostreamers, taken by the Coronal Multichannel Polarimeter (CoMP) telescope. These nulls represent regions where magnetic reconnection is likely to act as a catalyst for solar activity. CoMP linear-polarization observations also provide an independent, coronal proxy for magnetic expansion into the solar wind, a quantity often used to parameterize and predict the solar wind speed at Earth. We introduce a new method for explicitly calculating expansion factors from CoMP coronal linear-polarization observations, which does not require photospheric extrapolations. We conclude that linearly polarized light is a powerful new diagnostic of critical coronal magnetic topologies and the expanding magnetic flux tubes that channel the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

A Solar Blowout Jet Caused by the Eruption of a Magnetic Flux Rope

We investigate the three-dimensional (3D) magnetic structure of a blowout jet originating in the western edge of NOAA active region (AR) 11513 on 2012 July 2 by means of recently developed forced field extrapolation model. The results show that the blowout jet was caused by the eruption of the magnetic flux rope (MFR) consisting of twisted field lines. We further calculate the twist number T{sub w} and squashing factor Q of the reconstructed magnetic field and find that (1) the MFR corresponds well with the high T{sub w} region, and (2) the MFR outer boundary corresponds well with the high Q region, probably interpreting the bright structure at the base of the jet. The twist number of the MFR is estimated to be T{sub w}=−1.54±0.67. Thus, the kink instability is regarded as the initiation mechanism of the blowout jet as T{sub w} reaches or even exceeds the threshold value of the kink instability. Our results also indicate that the bright point at the decaying phase is actually composed of some small loops that are heated by the reconnection occurring above. In summary, the blowout jet is mostly consistent with the scenario proposed by Moore et al., except that the kink instability is found to be a possible trigger.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Added value of site load measurements in probabilistic lifetime extension: a Lillgrund case study

Site-specific fatigue estimation is an essential part of wind turbine lifetime extension, with various methods depending on data availability. The present study compares probabilistic lifetime extension assessment results for rotor blades with and without load measurements. It also addresses two key questions in such assessments: the applicability of the Frandsen model for estimating waked turbulence under complex and mixed wake conditions and the extrapolation of mid-term data over longer time periods. The case study wind turbine is SWT-2.3-93, located at the edge of the Lillgrund wind farm, situated in the Øresund Strait between Denmark and Sweden. The turbine is extensively instrumented, with 5 years of data available from its supervisory control and data acquisition (SCADA) system. Although the Frandsen turbulence estimates deviate in a different manner from measurements at below- and above-rated mean wind speeds, the model remains a conservative approach for fatigue load prediction and reliability. In the current case study, the site-specific assessment using strain gauge measurements yields a 33 % higher annual fatigue reliability index after 35 years compared to a scenario based on the Frandsen estimation combined with ambient environmental data and a generic aeroelastic model. The results also demonstrate that the sensitivity of fatigue reliability to load uncertainty is negligible when load measurements are used directly but relatively high when relying on the Frandsen model in combination with a generic aeroelastic model. Overall, the high variability of the lifetime extension in different scenarios of data availability and accuracy shows the importance and added value of high-quality measurements combined with wind-farm-level SCADA and a model updated in real time (digital twins).

17 WIND ENERGY↗
DOE OSTI2026

Scaled Implementation of Smart Charge Management for Electric Vehicles

Smart charge management (SCM) has become a critical strategy for mitigating potential grid impacts and reducing electricity costs for all customers. This study will evaluate the economics of implementing light-duty EV SCM at scale across the United States. This work will enhance distribution system analysis by estimating SCM implementation costs, exploring viable business cases, and developing a framework for national-level applications. The primary methodology involves leveraging detailed grid modeling from a specific service territory and using spatial extrapolation techniques to generalize findings to other regions. The analysis will develop key metrics to quantify the costs and benefits of SCM, including implementation costs relative to strategy and scale, the cost of distribution system upgrades with and without SCM, and the percentage of peak-load reduction. The objective is to produce a comprehensive report and a parameterized framework that enables utilities to self-assess the value of SCM in their own service territories. This will support the development of cost-effective charging strategies, accelerate the energization of new EV chargers, and facilitate the seamless integration of EVs into the nation's power grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1993

Cross Sections for Electron Scattering by Ground State Ba; Elastic Scattering and Excitation of the ...6s6p (sup 1)P(sub 1) Level

Differential cross sections for elastic and inelastic (6s6p (sup 1)P(sub 1)) electron scattering from ground state Ba atom have been measured at 5eV, 10eV, 15eV, and 20eV impact energies in the angular range from 0(sup 0) to 130(sup 0). Extrapolation to the larger angles have been performed using theoretical calculations as a guide, and integral and momentum transfer cross sections were derived. Theoretical calculations based on two channel clos coupling and relativistic and non-relativistic distorted wave methods have been compared with the present results. Good agreement between experiment and various theoretical results is found at small scattering angles but significant deviations exist at larger scattering angles.

electon scattering extrapolation scattering angles↗
NASA NTRSDate not supplied

Modeling Measurement Error in Dose-Response Models of Community Annoyance to Low-Noise Supersonic Flight

The primary research goal of the forthcoming NASA Quesst mission community test campaign is to collect representative community response data in support of the development of supersonic overflight noise certification standards. Beginning in 2026, NASA will fly the novel X-59 demonstrator aircraft over select communities in United States in order to demonstrate the possibility of low-noise supersonic flight over land and to collect objective measurements and subjective data on the perceptual experience of this new noise source. It is believed that a regression of a binary perceptual response (‘highly annoyed’ or ‘not’) on estimated noise levels (doses, measured in decibels) will provide a useful dose-response relationship for regulators. However, as these estimated doses will be subject to measurement error, naïve estimators of regression coefficients are inconsistent and slopes may be subject to attenuation bias. In this presentation, I contrast functional modeling of measurement error via simulation extrapolation (SIMEX) with structural Bayesian measurement error models. These methods are applied to available data collected during two NASA risk reduction studies in California in 2011 and Texas in 2018. I’ll conclude noting that in the presence of nonnegligible measurement errors, probabilities of annoyance may be overpredicted for low noise levels and underpredicted for high noise levels, therefore, methods of correcting for measurement error will be necessary to improve the utility of the dose-response relationship for policy-making purposes.

simulation↗
DOE OSTI2013

A Flow-Channel Analysis for the Mars Hopper

The Mars Hopper is an exploratory vehicle designed to fly on Mars using carbon dioxide from the Martian atmosphere as a rocket propellant. The propellent gasses are thermally heated while traversing a radioisotope ther- mal rocket (RTR) engine’s core. This core is comprised of a radioisotope surrounded by a heat capacitive material interspersed with tubes for the propellant to travel through. These tubes, or flow channels, can be manu- factured in various cross-sectional shapes such as a special four-point star or the traditional circle. Analytical heat transfer and computational fluid dynamics (CFD) anal- yses were performed using flow channels with either a circle or a star cross- sectional shape. The nominal total inlet pressure was specified at 2,805,000 Pa; and the outlet pressure was set to 2,785,000 Pa. The CO2 inlet tem- perature was 300 K; and the channel wall was 1200 K. The steady-state CFD simulations computed the smooth-walled star shape’s outlet temper- ature to be 959 K on the finest mesh. The smooth-walled circle’s outlet temperature was 902 K. A circle with a surface roughness specification at 0.01 mm gave 946 K and at 0.1 mm yielded 989 K. The The effects of a slightly varied inlet pressure were also examined. The analytical calculations were based on the mass flow rates computed in the CFD simulations and provided significantly higher outlet temperature results while displaying the same comparison trends. Research relating to the flow channel heat transfer studies was also done. Mathematical methods to geometrically match the cross-sectional areas of the circle and star, along with a square and equilateral triangle, were derived. A Wolfram Mathematica 8 module was programmed to analyze CFD results using Richardson Extrapolation and calculate the grid convergence index (GCI). A Mathematica notebook, also composed, computes and graphs the bulk mean temperature along a flow channel’s length while the user dynam- ically provides the input variables, allowing their effects on the temperature to be more easily observed.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2013

Converged accelerated finite difference scheme for the multigroup neutron diffusion equation

Computer codes involving neutron transport theory for nuclear engineering applications always require verification to assess improvement. Generally, analytical and semi-analytical benchmarks are desirable, since they are capable of high precision solutions to provide accurate standards of comparison. However, these benchmarks often involve relatively simple problems, usually assuming a certain degree of abstract modeling. In the present work, we show how semi-analytical equivalent benchmarks can be numerically generated using convergence acceleration. Specifically, we investigate the error behavior of a 1D spatial finite difference scheme for the multigroup (MG) steady-state neutron diffusion equation in plane geometry. Since solutions depending on subsequent discretization can be envisioned as terms of an infinite sequence converging to the true solution, extrapolation methods can accelerate an iterative process to obtain the limit before numerical instability sets in. The obtained results have been compared to the analytical solution to the 1D multigroup diffusion equation when available, using FORTRAN as the computational language. Finally, a slowing down problem has been solved using a cascading source update, showing how a finite difference scheme performs for ultra-fine groups (104 groups) in a reasonable computational time using convergence acceleration. (authors)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

Benchmarks for the point kinetics equations

A new numerical algorithm is presented for the solution to the point kinetics equations (PKEs), whose accurate solution has been sought for over 60 years. The method couples the simplest of finite difference methods, a backward Euler, with Richardsons extrapolation, also called an acceleration. From this coupling, a series of benchmarks have emerged. These include cases from the literature as well as several new ones. The novelty of this presentation lies in the breadth of reactivity insertions considered, covering both prescribed and feedback reactivities, and the extreme 8- to 9- digit accuracy achievable. The benchmarks presented are to provide guidance to those who wish to develop further numerical improvements. (authors)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2013

The Full Scale Seal Experiment - A Seal Industrial Prototype for Cigeo - 13106

The Full Scale Seal (FSS) Experiment is one of various experiments implemented by Andra, within the frame of the Cigeo (the French Deep Geological Repository) Project development, to demonstrate the technical construction feasibility and performance of seals to be constructed, at time of Repository components (shafts, ramps, drifts, disposal vaults) progressive closure. FSS is built inside a drift model fabricated on surface for the purpose. Prior to the scale 1:1 seal construction test, various design tasks are scheduled. They include the engineering work on the drift model to make it fit with the experimental needs, on the various work sequences anticipated for the swelling clay core emplacement and the concrete containment plugs construction, on the specialized handling tools (and installation equipment) manufactured and delivered for the purpose, and of course on the various swelling clay materials and low pH (below 11) concrete formulations developed for the application. The engineering of the 'seal-as-built' commissioning means (tools and methodology) must also be dealt with. The FSS construction experiment is a technological demonstrator, thus it is not focused on the phenomenological survey (and by consequence, on the performance and behaviour forecast). As such, no hydration (forced or natural) is planned. However, the FSS implementation (in particular via the construction and commissioning activities carried out) is a key milestone in view of comforting phenomenological extrapolation in time and scale. The FSS experiment also allows for qualifying the commissioning methods of a real sealing system in the Repository, as built, at time of industrial operations. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗