Search NASA⌕ Search

SEARCH · Search NASA

Results for “High order method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

High-Order/Low-Dissipation Chain-Rule Flux Solution Reconstruction Schemes in FUN3D

In this paper, we report progress in the development of economically high-order flux-solution-reconstruction (FSR) schemes, which are second-order accurate on general unstructured grids but achieve high-order accuracy when a grid is regular, i.e., has the same stencil (with the same spacing) throughout the domain. Two variants of the FSR schemes are discussed: chain-rule-flux-solution reconstruction (CFSR) and quadratic-form-flux-solution reconstruction (QFSR), where the former is based on the chain rule and the latter on the flux reconstruction expressed as a function of solution variables. These schemes are tested for flows with shock waves with a limiter incorporated in the flux and solution reconstructions. Improved results, compared with second-order methods are demonstrated for inviscid and viscous flows with smooth grids.

high-order↗

Utilization of Low Gravity Environment for Measuring Liquid Viscosity

The method of drop coalescence is used for determining the viscosity of highly viscous undercooled liquids. Low gravity environment is necessary in order to allow for examining large volumes affording much higher accuracy for the viscosity calculations than possible for smaller volumes available under 1 - g conditions. The drop coalescence method is preferred over the drop oscillation technique since the latter method can only be applied for liquids with vanishingly small viscosities. The technique developed relies on both the highly accurate solution of the Navier-Stokes equations as well as on data from experiments conducted in near zero gravity environment. Results are presented for method validation experiments recently performed on board the NASA/KC-135 aircraft. While the numerical solution was produced using the Boundary Element Method. In these tests the viscosity of a highly viscous liquid, glycerine at room temperature, was determined using the liquid coalescence method. The results from these experiments will be discussed.

Antar, Basil N.↗

Detection of fatigue cracks by nondestructive testing methods

The effectiveness was assessed of various NDT methods to detect small tight cracks by randomly introducing fatigue cracks into aluminum sheets. The study included optimizing NDT methods calibrating NDT equipment with fatigue cracked standards, and evaluating a number of cracked specimens by the optimized NDT methods. The evaluations were conducted by highly trained personnel, provided with detailed procedures, in order to minimize the effects of human variability. These personnel performed the NDT on the test specimens without knowledge of the flaw locations and reported on the flaws detected. The performance of these tests was measured by comparing the flaws detected against the flaws present. The principal NDT methods utilized were radiographic, ultrasonic, penetrant, and eddy current. Holographic interferometry, acoustic emission monitoring, and replication methods were also applied on a reduced number of specimens. Generally, the best performance was shown by eddy current, ultrasonic, penetrant and holographic tests. Etching provided no measurable improvement, while proof loading improved flaw detectability. Data are shown that quantify the performances of the NDT methods applied.

Anderson, R. T.↗

A splitting Chebyshev collocation method for Schrödinger–Poisson system

We develop a splitting Chebyshev collocation (SCC) method for the time-dependent Schrödinger–Poisson (SP) system arising from theoretical analysis of quantum plasmas. By means of splitting technique in time, the time-dependant SP system is first reduced to uncoupled Schrödinger and Poisson equations at every time step. The space variables in Schrödinger and Poisson equations are next represented by high-order Chebyshev polynomials, and the resulting system are discretized by the spectral collocation method. Finally, matrix diagonalization technique is applied to solve the fully discretized system in one dimension, two dimensions and three dimensions, respectively. The newly proposed method not only achieves spectral accuracy in space but also reduces the computer-memory requirements and the computational time in comparison with conventional solver. Numerical results confirm the spectral accuracy and efficiency of this method, and indicate that the SCC method could be an efficient alternative method for simulating the dynamics of quantum plasmas.

97 MATHEMATICS AND COMPUTING↗

Hybridized Discontinuous Galerkin Methods for Computational Fluid Dynamics

Hybridizable Discontinuous Galerkin (HDG) methods hold promise for any applications with significant advection character, including thermal hydraulics in light water reactors and advanced reactor concepts and fluid models of plasmas in magnetic confinement fusion. Its features include natural upwinding, local element conservation, and extensibility to arbitrarily high order accuracy. In the last fiscal year we have implemented HDG in the Multiphysics Object-Oriented Simulation Environment (MOOSE). We developed a first-of-its-kind automatic static condensation system in MOOSE’s underlying finite element library libMesh which can condense out arbitrarily many internal variables. Finally, we developed the first preconditioner for HDG discretizations of the Navier-Stokes equations which shows robust performance across a wide range of problem sizes and Reynolds numbers. This preconditioner yields solution times that are equivalent to the fastest developed for industry standard finite volume methods. Moreover, the arbitrarily high-order nature of HDG makes it a prime candidate for acceleration via graphical processing units (GPUs). We believe these developments will hold significant importance for future DOE Nuclear Energy (NE) and Fusion Energy Science (FES) programs.

97 MATHEMATICS AND COMPUTING↗

A Simple Method for High-Lift Propeller Conceptual Design

In this paper, we present a simple method for designing propellers that are placed upstream of the leading edge of a wing in order to augment lift. Because the primary purpose of these "high-lift propellers" is to increase lift rather than produce thrust, these props are best viewed as a form of high-lift device; consequently, they should be designed differently than traditional propellers. We present a theory that describes how these props can be designed to provide a relatively uniform axial velocity increase, which is hypothesized to be advantageous for lift augmentation based on a literature survey. Computational modeling indicates that such propellers can generate the same average induced axial velocity while consuming less power and producing less thrust than conventional propeller designs. For an example problem based on specifications for NASA's Scalable Convergent Electric Propulsion Technology and Operations Research (SCEPTOR) flight demonstrator, a propeller designed with the new method requires approximately 15% less power and produces approximately 11% less thrust than one designed for minimum induced loss. Higher-order modeling and/or wind tunnel testing are needed to verify the predicted performance.

Patterson, Michael↗

Surface analysis insight note: Differentiation methods applicable to noisy data for determination of sp2‐ versus sp3‐hybridization of carbon allotropes and AES signal strengths

The derivatives of the spectra are commonly used for quantification in Auger Electron Spectroscopy (AES) spectra, while the derivative of the KLL C Auger line has proven to be valuable in obtaining a measure of the relative proportions of sp 2 ‐ and sp 3 ‐hybridization using the D‐parameter in both AES and X‐ray Photoelectron Spectroscopy (XPS). Differentiation of X‐ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) spectra by numerical means is presented and illustrated for polymeric, such as PEEK and Nylon, as well as for graphitic materials including highly ordered pyrolytic graphite and graphene oxide. The most commonly available Savitzky–Golay method is explained mathematically and developed through the case of constructing a 5‐point quadratic polynomial convolution kernel suitable for differentiating spectra of adequate signal to noise. The concept of differentiation of spectra where signal to noise is less than adequate is also developed. Two alternative strategies to Savitzky–Golay differentiation are presented, which fit curves to data that allow derivatives to be obtained where Savitzky–Golay would otherwise fail. These alternative methods involve constructing a parametric curve that fits data over the entire energy interval of interest. Derivatives of spectra are then obtained by differentiating these parametric curves directly. A comparison of results for different materials for which specific sp 2 ‐ vs sp 3 ‐hybridized carbon proportions are of interest is used to emphasize the importance of characterizing methods used to differentiate spectra and understanding the characteristics of instrumentation used to measure spectra. The case for using Principal Component Analysis noise reduction with C KLL spectra is made for spectra collected from a heterogeneous graphene oxide sample.

Fairley, Neal↗

A high-resolution numerical technique for inviscid gas-dynamic problems with weak solutions

The shock resolution of Harten's (1982) second-order explicit method for one-dimensional hyperbolic conservation laws is investigated for a two-dimensional gas-dynamic problem. The possible extension to a high resolution implicit method for both one- and two-dimensional problems is also investigated. Applications of Harten's method to the quasi-one-dimensional nozzle problem with two nozzle shapes (divergent and convergent-divergent) and the two-dimensional shock-reflection problem resulted in high shock resolution steady-state numerical solutions.

Yee, H. C.↗

Efficiently Scheduling Multi-core Guest Virtual Machines on Multi-core Hosts in Network Simulation

Virtual machine (VM)-based simulation is a method used by network simulators to incorporate realistic application behaviors by executing actual VMs as high-fidelity surrogates for simulated end-hosts. A critical requirement in such a method is the simulation time-ordered scheduling and execution of the VMs. Prior approaches such as time dilation are less efficient due to the high degree of multiplexing possible when multiple multi-core VMs are simulated on multi-core host systems. We present a new simulation time-ordered scheduler to efficiently schedule multi-core VMs on multi-core real hosts, with a virtual clock realized on each virtual core. The distinguishing features of our approach are: (1) customizable granularity of the VM scheduling time unit on the simulation time axis, (2) ability to take arbitrary leaps in virtual time by VMs to maximize the utilization of host (real) cores when guest virtual cores idle, and (3) empirically determinable optimality in the tradeoff between total execution (real) time and time-ordering accuracy levels. Experiments show that it is possible to get nearly perfect time-ordered execution, with a slight cost in total run time, relative to optimized non-simulation VM schedulers. Interestingly, with our time-ordered scheduler, it is also possible to reduce the time-ordering error from over 50% of non-simulation scheduler to less than 1% realized by our scheduler, with almost the same run time efficiency as that of the highly efficient non-simulation VM schedulers.

99 GENERAL AND MISCELLANEOUS↗

RESOLVING THE ELECTROCHEMICAL EQUATIONS OF A SOLID OXIDE FUEL CELL FOR USE IN TRANSIENT SIMULATION AND INTEGRATION INTO CYBER-PHYSICAL SYSTEMS

A major challenge with complex cyber-physical systems stems from long model computational time that creates a mismatch between the model system and the physical system. The numerical modeling of solid oxide fuel cells (SOFCs) presents particular challenges due to the highly coupled nature of the underlying equations and the multiphysics needed to fully resolve their behavior during a transient event. To this end current approaches revolve around splitting the computational efforts into resolving temperature effects and resolving electrochemical effects. Current methods employed for the transient simulation of an SOFC for implementation in the Hybrid Performance (HyPer) facility cyberphysical plant at the National Energy Technology Laboratory reveal a distinct need for accelerated results with a high degree of stability. To this aim, an investigation into the computational time for the code reveals that the underlying electrochemical algorithm takes an order of magnitude more time than its thermal counterpart and has a tendency to vary in terms of iteration time and as such a rework of the underlying system is proposed. The primary method for accelerated electrochemical algorithm solutions is to employ higher order root finding recipes for the resolution of the highly coupled electrochemical equations. This is done with the intention to reduce the overall number of subiterations necessary for resolving voltage, current density, and species concentration, properties of the fuel cell that are all directly coupled and require nested iterative approaches. The overall objective of this approach is an order of magnitude reduction in calculation time without sacrificing stability and increasing accuracy. Specific approaches involve using both bounded and unbounded techniques, such as the False Position method and the Secant method (or if applicable Newton-Raphson) respectively, the drawbacks being slower convergence for False Position and instability for the Secant or Newton-Raphson methods. Current preliminary results on simplified versions of the parent functions involved for electrochemical calculations indicate a reduction in computational steps by a factor of two for the secant method and a factor of three for Newton-Raphson. When implemented into new modified electrochemical algorithms, the results indicate a possible order of magnitude reduction in calculation time.

Arias, Jesus↗

Identifying Differential Equations in Fourier Domain (FourierIdent)

We investigate identifying differential equations in the frequency domain. Fourier analysis is an important tool in theoretical analysis and numerical solvers of differential equations, yet there is limited work in exploring this connection in the identification of differential equations. This paper aims to identify the underlying differential equation in the frequency domain, from a given single realization of the differential equation perturbed by noise. Such setting imposes difficulties which are different from other identification methods where computation is carried out in the physical domain. We propose several ways to mitigate the challenges arising from noise in data and large differences in the magnitudes of frequency responses. The main takeaways are that identifying differential equations solely in the frequency domain is challenging, the method we propose is based on a form of domain partitions in the frequency domain, and this method shows benefits for complex data even with high level of noise. We introduce a Fourier feature denoising, and define the meaningful data region and the core regions of features to reduce the effect of noise in the frequency domain and to enhance the accuracy in coefficient identification. The proposed method is tested on various differential equations with linear, nonlinear, and high-order derivative feature terms, and shows advantages on complex data with many frequency modes, even under high level of noise.

97 MATHEMATICS AND COMPUTING↗

Stability of the hcp Ruthenium at high pressures from first principles

The method of calculation of the elastic constants up to third order from the energy-strain relation under pressure for the hcp crystals is given and described in details. The method is applied to the hcp phase of Ruthenium. Elastic constants, lattice dynamics, and electronic structure are investigated in the pressure interval of 0–600 GPa by means of first principles calculations. The obtained parameters are in very good agreement with available experimental and theoretical data. No preconditions for phase transformation driven by mechanical or dynamical instabilities for hcp Ru were found in the investigated pressure range. The reason of stability at such high pressures is explained in the context of electronic structure peculiarities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Symplectic machine learning model for fast simulation of space-charge effects

Symplectic simulation of space-charge effects is crucial for the design and operation of high-intensity particle accelerators. Traditional methods for simulating these effects are often computationally expensive, resulting in significant overhead. In this work, we introduce a generative model based on a U-Net architecture within a generative adversarial network framework to efficiently simulate space-charge effects. The model is trained to predict the transverse multiparticle space-charge Hamiltonian, which can be physically computed using a gridless spectral method. The one-step symplectic transverse transfer map for the particles is then obtained by differentiating the predicted Hamiltonian. Benchmarking results demonstrate that this generative model achieves an order of magnitude higher computational efficiency compared to the spectral method, providing a highly efficient alternative for simulating space-charge effects with a large number of particles. By maintaining symplecticity, the model effectively preserves the phase-space structure and mitigates nonphysical errors in long-term simulations. This model has been integrated into jutrack, a novel autodifferentiable accelerator modeling code developed in the julia programming language.

Beam code development & simulation techniques↗

An Easy Method to Accelerate an Iterative Algebraic Solver, part II

This study is a companion to [Yao, Journal of Computational Physics267(2014)]. We provide a compact alternative development of Yao’s method to accelerate to order 2n–1 a fixed-point iterative scheme with an original convergence-rate of ordern. Using this approach, we show how to further improve the order of convergence by increasings, the number of steps per iteration. This scheme extends to arbitrarily high order without extra derivative evaluations per iteration. We discuss the efficiency of the new methods, including s = 2 (Yao’s method), and compare to that of the original method as a function of n; and we consider the efficiency for systems of equations of system-size M. For n = 2 and large M, we find that the multi-step scheme peaks in efficiency at about s ln s ~ M function evaluations, where its computational speed is several times faster than Newton’s method.

97 MATHEMATICS AND COMPUTING↗

Forward-Weighted CADIS Method for Variance Reduction of Monte Carlo Reactor Analyses

Current state-of-the-art tools and methods used to perform 'real' commercial reactor analyses use high-fidelity transport codes to produce few-group parameters at the assembly level for use in low-order methods applied at the core level. Monte Carlo (MC) methods, which allow detailed and accurate modeling of the full geometry and energy details and are considered the 'gold standard' for radiation transport solutions, are playing an ever-increasing role in correcting and/or verifying the several-decade-old methodology used in current practice. However, the prohibitive computational requirements associated with obtaining fully converged system-wide solutions restrict the role of MC to benchmarking deterministic results at a limited number of state-points for a limited number of relevant quantities. A goal of current research at Oak Ridge National Laboratory (ORNL) is to change this paradigm by enabling the direct use of MC for full-core reactor analyses. The most significant of the many technical challenges that must be overcome is the slow non-uniform convergence of system-wide MC estimates and the memory requirements associated with detailed solutions throughout a reactor (problems involving hundreds of millions of different material and tally regions due to fuel irradiation, temperature distributions, and the needs associated with multi-physics code coupling). To address these challenges, research has focused on development in the following two areas: (1) a hybrid deterministic/MC method for determining high-precision fluxes throughout the problem space in k-eigenvalue problems and (2) an efficient MC domain-decomposition algorithm that partitions the problem phase space onto multiple processors for massively parallel systems, with statistical uncertainty estimation. The focus of this paper is limited to the first area mentioned above. It describes the FW-CADIS method applied to variance reduction of MC reactor analyses and provides initial results for calculating group-wise fluxes throughout a generic 2-D pressurized water reactor (PWR) quarter core model.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Multi-material hydrodynamics with algebraic sharp interface capturing

A finite volume method for Eulerian multi-material hydrodynamics with sharp interface capturing is presented here. The pressure-temperature non-equilibrium multi-material system with finite-rate pressure relaxation in mixed-cells is considered here. This pressure closure facilitates material-property-dependent pressure relaxation, rather than instantaneous pressure equilibration, which in turn allows the use of unsplit high-order time-integrators. A modified tangent of hyperbola for interface capturing (THINC) method is used to reconstruct multi-material (> 2) interfaces, on three-dimensional unstructured meshes. A simple modification which extends the THINC reconstruction to interfaces between more than two materials is proposed. It is demonstrated that the modified THINC can capture multi-material interfaces within 2–4 tetrahedral cells. Since no geometric reconstructions are required by the THINC method, the presented multi-material method is algorithmically simple, and computationally efficient. Consistent reconstructions of conserved quantities at material interfaces ensure that conservation and closure laws are satisfied at the discrete level. Through a suite of test problems solved on unstructured meshes, it is demonstrated that the presented method is a promising candidate for accurate and efficient multi-material hydrodynamics computations.

97 MATHEMATICS AND COMPUTING↗

Study of a high-order-mode gyrotron traveling-wave amplifier

Physics and performance issues of a TE{sub 01}-mode gyrotron traveling-wave amplifier are studied in theory. For a high order mode, absolute instabilities on neighboring modes at the fundamental and higher cyclotron harmonic frequencies impose severe constraints to the device capability. Methods for their stabilization are outlined, on the basis of which the performance characteristics are examined in a multidimensional parameter space under the marginal stability criterion. The results demonstrate the viability of a high-order-mode traveling-wave amplifier and provide a roadmap for design tradeoffs among power, bandwidth, and efficiency. General trends are observed and illustrated with specific examples.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Order Residual-Distribution Hyperbolic Advection-Diffusion Schemes: 3rd-, 4th-, and 6th-Order

In this paper, spatially high-order Residual-Distribution (RD) schemes using the first-order hyperbolic system method are proposed for general time-dependent advection-diffusion problems. The corresponding second-order time-dependent hyperbolic advection- diffusion scheme was first introduced in [NASA/TM-2014-218175, 2014], where rapid convergences over each physical time step, with typically less than five Newton iterations, were shown. In that method, the time-dependent hyperbolic advection-diffusion system (linear and nonlinear) was discretized by the second-order upwind RD scheme in a unified manner, and the system of implicit-residual-equations was solved efficiently by Newton's method over every physical time step. In this paper, two techniques for the source term discretization are proposed; 1) reformulation of the source terms with their divergence forms, and 2) correction to the trapezoidal rule for the source term discretization. Third-, fourth, and sixth-order RD schemes are then proposed with the above techniques that, relative to the second-order RD scheme, only cost the evaluation of either the first derivative or both the first and the second derivatives of the source terms. A special fourth-order RD scheme is also proposed that is even less computationally expensive than the third-order RD schemes. The second-order Jacobian formulation was used for all the proposed high-order schemes. The numerical results are then presented for both steady and time-dependent linear and nonlinear advection-diffusion problems. It is shown that these newly developed high-order RD schemes are remarkably efficient and capable of producing the solutions and the gradients to the same order of accuracy of the proposed RD schemes with rapid convergence over each physical time step, typically less than ten Newton iterations.

Mazaheri, Alireza R.↗