Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC COMPRESSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Anomalous electron transport in epitaxial NdNiO 3 films

The origin of simultaneous electronic, structural, and magnetic transitions in bulk rare-earth nickelates (RENiO 3 ) remains puzzling with multiple conflicting reports on the nature of these entangled phase transitions. Heterostructure engineering of these materials offers unique opportunity to decouple the metal-insulator transition (MIT) from the magnetic transition. Yet, the evolution of underlying electronic properties across these decoupled transitions remains largely unexplored. In order to address this, we have calculated Hall effect on a series of epitaxial NdNiO 3 films, spanning a variety of electronic and magnetic phases. We find that the MIT results in only a partially gapped Fermi surface, whereas the full insulating phase forms below the magnetic transition. Moreover, we also find a systematic reduction of the Hall coefficient R H in the metallic phase of these films with epitaxial strain and also a surprising transition to a negative value at large compressive strain. The partially gapped, weakly insulating, paramagnetic phase is reminiscence of pseudogap behavior of high-T c cuprates. The precursor metallic phase, which undergoes transition to the insulating phase, is a non-Fermi liquid with a temperature exponent n of resistivity of 1, whereas the exponent increases to 4/3 in the noninsulating samples. Such a nickelate phase diagram with sign reversal of R H , a pseudogap phase, and non-Fermi-liquid behavior is intriguingly similar to high-T c cuprates, giving crucial guidelines to engineer unconventional superconductivity in oxide heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Studying the Suitability of Nineteen Lignins as Partial Polyol Replacement in Rigid Polyurethane/Polyisocyanurate Foam

In this study, nineteen unmodified lignins from various sources (hardwood, softwood, wheat straw, and corn stover) and isolation processes (kraft, soda, organosolv, sulfite, and enzymatic hydrolysis) were used to replace 30 wt.% of petroleum-based polyol in rigid polyurethane/polyisocyanurate (PUR/PIR) foam formulations. Lignin samples were characterized by measuring their ash content, hydroxyl content (Phosphorus Nuclear Magnetic Resonance Spectroscopy), impurities (Inductively Coupled Plasma), and pH. After foam formulation, properties of lignin-based foams were evaluated and compared with a control foam (with no lignin) via cell morphology, closed-cell content, compression strength, apparent density, thermal conductivity, and color analysis. Lignin-based foams passed all measured standard specifications required by ASTM International C1029-15 for type 1 rigid insulation foams, except for three foams. These three foams had poor compressive strengths, significantly larger cell sizes, darker color, lower closed-cell contents, and slower foaming times. The foam made with corn stover enzymatic hydrolysis lignin showed no significant difference from the control foam in terms of compressive strength and outperformed all other lignin-based foams due to its higher aliphatic and p-hydroxyphenyl hydroxyl contents. Lignin-based foams that passed all required performance testing were made with lignins having higher pH, potassium, sodium, calcium, magnesium, and aliphatic/p-hydroxyphenyl hydroxyl group contents than those that failed.

59 BASIC BIOLOGICAL SCIENCES↗

HPCAT: A Static Compression Science Sector at the Advance Photon Source

Static compression is a useful tool to investigate the materials properties and phase behavior both under uniaxial stress and hydrostatic pressure. From evaluation of the equation of state (P-V-T relationship) to a discovery of near-room temperature superconductivity, the use of diamond anvil cells (DAC) and large-volume presses (LVP) as devices for static compression experiments that couple with synchrotron-based x-ray diffraction, spectroscopy, and imaging techniques achieved pioneering, paradigm defining scientific advancements in multidisciplinary fields for the past two decades. High-Pressure Collaborative Access Team (HPCAT) is a sector at the Advanced Photon Source dedicated to developing multiple synchrotron-based x-ray techniques to maximize the utility of DAC and portable-LVP techniques to advance compression science. The beamlines are optimized to adapt various sample environments under extreme P-T conditions. HPCAT is comprised of two insertion device beamlines, one for diffraction and the other for spectroscopy, and two bending magnet beamlines, one for general purpose and the other for white-beam application, respectively. As a result, each beamline’s specification and applications are introduced.

36 MATERIALS SCIENCE↗

Acoustic/Magnetic Stress Sensor

High-resolution sensor fast, portable, does not require permanent bonding to structure. Sensor measures nondestructively type (compressive or tensile) and magnitude of stresses and stress gradients present in class of materials. Includes precise high-resolution acoustic interferometer, sending acoustic transducer, receiving acoustic transducer, electromagnet coil and core, power supply, and magnetic-field-measuring device such as Hall probe. This measurement especially important for construction and applications where steel is widely used. Sensor useful especially for nondestructive evaluation of stress in steel members because of portability, rapid testing, and nonpermanent installation.

Heyman, J. S.↗

Three-dimensional MHD modeling of magnetotail dynamics for different polytropic indices

The paper analyzes the 3D resistive tearing instability in a magnetotail configuration by means of a resistive MHD code for various forms of the energy equation, including ohmic and compressional heating. A complete derivation of the set of MHD equations from a kinetic formalism is presented, with all simplifying assumptions noted. Emphasis is placed on the changes in magnetotail evolution caused by a variation of the assumed value of the polytropic exponent gamma, representing the ratio of specific heat in the energy equation which closes the set of MHD equations. Within the gamma range of 2/3-4, a tearing mode is found to develop in all cases. Certain properties, such as the formation and ejection of a plasmoid, associated with the formation of the reversal region of the north-south component of the magnetic field, and strong earthward and tailward flow fields prevail as qualitative features independent of the value of gamma chosen. Ohmic dissipation is found to be the major source of the heating, while adiabatic or nonadiabatic compression may contribute primarily in the closed field region earthward of the reconnection site.

Hesse, Michael↗

Fast magnetic reconnection with small shock angles

The Petschek (1964) mechanism, generalized by Priest and Forbes (1986), was studied using a 2D incompressible MHD simulation. Various regimes predicted by Priest and Forbes are obtained for different boundary conditions on the outflow boundary. They include a weak fast-mode expansion, slow-mode compression, slow-mode expansion, and a hybrid regime of fast-mode and slow-mode expansion. The width and the length of the current sheet for different parameters obtained in the simulations were found to be consistent with theoretical values.

Yan, M.↗

Tiny Sc Allows the Chains to Rattle: Impact of Lu and Y Doping on the Charge-Density Wave in ScV 6 Sn 6

The kagome metals display an intriguing variety of electronic and magnetic phases arising from the connectivity of atoms on a kagome lattice. A growing number of these materials with vanadium–kagome nets host charge–density waves (CDWs) at low temperatures, including ScV 6 Sn 6 , CsV 3 Sb 5 , and V 3 Sb 2 . Curiously, only the Sc version of the RV 6 Sn 6 materials with a HfFe 6 Ge 6 -type structure hosts a CDW (R = Gd–Lu, Y, Sc). In this study, we investigate the role of rare earth size in CDW formation in the RV 6 Sn 6 compounds. Magnetization measurements on our single crystals of (Sc,Lu)V 6 Sn 6 and (Sc,Y)V 6 Sn 6 establish that the CDW is suppressed by substituting Sc by larger Lu or Y. Single-crystal X-ray diffraction reveals that compressible Sn–Sn bonds accommodate the larger rare earth atoms within loosely packed R–Sn–Sn chains without significantly expanding the lattice. We propose that Sc provides extra room in these chains crucial to CDW formation in ScV 6 Sn 6 . Our rattling chain model explains why both physical pressure and substitution by larger rare earth atoms hinder CDW formation despite opposite impacts on lattice size. Here, we emphasize the cooperative effect of pressure and rare earth size by demonstrating that pressure further suppresses the CDW in a Lu-doped ScV 6 Sn 6 crystal. Our model not only addresses why a CDW only forms in the RV 6 Sn 6 materials with tiny Sc but also advances our understanding of why unusual CDWs form in the kagome metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Systematic control of strain-induced perpendicular magnetic anisotropy in epitaxial europium and terbium iron garnet thin films

We show tunable strain-induced perpendicular magnetic anisotropy (PMA) over a wide range of thicknesses in epitaxial ferrimagnetic insulator Eu 3 Fe 5 O 12 (EuIG) and Tb 3 Fe 5 O 12 (TbIG) thin films grown by pulsed-laser deposition on Gd 3 Ga 5 O 12 with (001) and (111) orientations, respectively. The PMA field is determined by measuring the induced anomalous Hall loops in Pt deposited on the garnet films. Due to positive magnetostriction constants, compressive in-plane strain induces a PMA field as large as 32.9 kOe for 4 nm thick EuIG and 66.7 kOe for 5 nm thick TbIG at 300 K and relaxes extremely slowly as the garnet film thickness increases. In bilayers consisting of Pt and EuIG or Pt and TbIG, robust PMA is revealed by squared anomalous Hall hysteresis loops in Pt, the magnitude of which appears to be only related to the net magnetic moment of iron sublattices. Furthermore, the magnetostriction constant is found to be 2.7 × 10 -5 for EuIG and 1.35 × 10 -5 for TbIG, comparable with the values for bulk crystals. Our results demonstrate a general approach of tailoring magnetic anisotropy of rare earth iron garnets by utilizing modulated strain via epitaxial growth.

36 MATERIALS SCIENCE↗

Physics-constrained, low-dimensional models for magnetohydrodynamics: First-principles and data-driven approaches

Plasmas are highly nonlinear and multiscale, motivating a hierarchy of models to understand and describe their behavior. However, there is a scarcity of plasma models of lower fidelity than magnetohydrodynamics (MHD), although these reduced models hold promise for understanding key physical mechanisms, efficient computation, and real-time optimization and control. Galerkin models, obtained by projection of the MHD equations onto a truncated modal basis, and data-driven models, obtained by modern machine learning and system identification, can furnish this gap in the lower levels of the model hierarchy. This work develops a reduced-order modeling framework for compressible plasmas, leveraging decades of progress in projection-based and data-driven modeling of fluids. We begin by formalizing projection-based model reduction for nonlinear MHD systems. To avoid separate modal decompositions for the magnetic, velocity, and pressure fields, we introduce an energy inner product to synthesize all of the fields into a dimensionally consistent, reduced-order basis. Next, we obtain an analytic model by Galerkin projection of the Hall-MHD equations onto these modes. We illustrate how global conservation laws constrain the model parameters, revealing symmetries that can be enforced in data-driven models, directly connecting these models to the underlying physics. We demonstrate the effectiveness of this approach on data from high-fidelity numerical simulations of a three-dimensional spheromak experiment. Finally, this manuscript builds a bridge to the extensive Galerkin literature in fluid mechanics and facilitates future principled development of projection-based and data-driven models for plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Archival of Poker Flat MST radar data

The Poker Flat MST (mesosphere stratosphere troposphere) radar has operated from early 1979 to 1985. The data recorded during that time resides on some 1100 magnetic tapes. A second set containing only the derived parameters of velocity, width and signal to noise of the primary echo at each height, plus the noise spectra, occupies another 250 tapes. While processing to generate the compressed data set does correct some known errors, no attempt has been made to identify or remove spurious echoes. Because the Poker Flat data set is such a unique and valuable resource, a proposal is made to archive the data in forms more useful for analysis. The archived data set would contain only the parameters for significant echoes with contamination from airplanes, unwanted ionospheric returns, frequently aliased Doppler signals and other sources removed. The archived set should be as good or better than the example shown and may occupy only 25 to 50 tapes.

Riddle, A. C.↗

Processing SAR Images On Board

Synthetic-aperture radar (SAR) processor operates aboard moving radar platform, turning raw signal data into images of scanned terrain. In conventional SAR systems, raw data either transmitted to stations on ground or recorded on magnetic tape by high-density digital recorders for subsequent processing on ground. Advantages include making SAR images available immediately and processed data transmitted or recorded only one-fifth as voluminous as raw data. Onboard image compression reduces volume of data even further.

Liu, Kuang Y.↗

On the energy principle and ion tearing in the magnetotail

We re-examine the use of the energy principle as applied to the tearing instability in the magnetotail. We demonstrate that when a magnetic field component normal to the current sheet is present, electron pitch-angle diffusion (PAD) either by micro-turbulence or by chaotic orbits cannot remove the strong stabilization of the tearing mode caused by electron compressibility. We find that our conclusions are in agreement with those of Pellat et al. (1991), who argued on the basis of canonical P(sub y) conservation that the stabilization of the ion tearing mode cannot be removed by the introduction of PAD. Our results are at variance with those of Kuznetsova and Zelenyi (1991), who argued that the application of the energy principle used by Pellat et al. (1991) is incorrect, and that tearing is in fact unstable in the limit of strong PAD. We show that the disagreement between these two studies can be traced to an incorrect orbit evaluation first introduced by Coroniti (1980) and subnsequently used by Kuznetsova and Zelenyi (1991).

Brittnacher, M.↗

Penetration of the Interplanetary Magnetic Field B(sub y) into Earth's Plasma Sheet

There has been considerable recent interest in the relationship between the cross-tail magnetic field component B(sub y) and tail dynamics. The purpose of this paper is to give an overall description of the penetration of the interplanetary magnetic field (IMF) B(sub y) into the near-Earth plasma sheet. We show that plasma sheet B(sub y) may be generated by the differential shear motion of field lines and enhanced by flux tube compression. The latter mechanism leads to a B(sub y) analogue of the pressure-balance inconsistency as flux tubes move from the far tail toward the Earth. The growth of B(sub y), however, may be limited by the dawn-dusk asymmetry in the shear velocity as a result of plasma sheet tilting. B(sub y) penetration into the plasma sheet implies field-aligned currents flowing between hemispheres. These currents together with the IMF B(sub y) related mantle field-aligned currents effectively shield the lobe from the IMF B(sub y).

Hau, L.-N.↗

Divergence Free High Order Filter Methods for Multiscale Non-ideal MHD Flows

Low-dissipative high order filter finite difference methods for long time wave propagation of shock/turbulence/combustion compressible viscous MHD flows has been constructed. Several variants of the filter approach that cater to different flow types are proposed. These filters provide a natural and efficient way for the minimization of the divergence of the magnetic field (Delta . B) numerical error in the sense that no standard divergence cleaning is required. For certain 2-D MHD test problems, divergence free preservation of the magnetic fields of these filter schemes has been achieved.

Yee, H. C.↗

High Order Filter Methods for Shock/Turbulence MHD Flows

Low-dissipative high order filter finite difference methods for shock/turbulence/combustion compressible viscous MHD flows has been constructed. Several variants of the filter approach that cater to different flow types are proposed. These filters provide a natural and efficient way for the minimization of the divergence of the magnetic field (del (raided dot) B) numerical error in the sense that no standard divergence cleaning is required. For certain 2-D MHD test problems, divergence free preservation of the magnetic fields of these filter schemes has been achieved.

Yee, H. C.↗

Adaptive Low Dissipative High Order Filter Methods for Multiscale MHD Flows

Adaptive low-dissipative high order filter finite difference methods for long time wave propagation of shock/turbulence/combustion compressible viscous MHD flows has been constructed. Several variants of the filter approach that cater to different flow types are proposed. These filters provide a natural and efficient way for the minimization of the divergence of the magnetic field [divergence of B] numerical error in the sense that no standard divergence cleaning is required. For certain 2-D MHD test problems, divergence free preservation of the magnetic fields of these filter schemes has been achieved.

Yee, H. C.↗

Procedures for Assessing the Stability of Proposed Topological Materials

Here, we investigate the stability of MnPb 2 Bi 2 Te 6 (MPBT), which is predicted to be a magnetic topological insulator (TI), using density functional theory calculations. Our analysis includes various measures such as enthalpies of formation, Helmholtz free energies, defect formation energies, and dynamical stability. Our thermodynamic analysis shows that the phonon contribution to the energy gain from finite temperature is estimated to be less than 10 meV/atom, which may not be sufficient to stabilize MPBT at high temperatures, even with the most favorable reactions starting from binaries. While MPBT is generally robust against the formation of various defects, we find that the anti-site defect formation of MnPb is the most likely to occur, with a corresponding energy less than 60 meV. This can be attributed to the significant energy cost from compressive strain at the PbTe layer. Our findings suggest that MPBT is on the brink of stability in terms of thermodynamics and defect formation, underscoring the importance of conducting systematic analyses of the stability of proposed TIs, including MPBT, for their practical utilization. This study offers valuable insights into the design and synthesis of desirable magnetic TI materials with robust stabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interaction of fast steady flow with slow transient flow - A new cause of shock pair and interplanetary B(z) event

The occurrence of the nonspiral magnetic field (high helium density) Cold Magnetic Enhancement and counterstreaming suprathermal electron flux in the slow flow around the forward shock indicates that the slow flow is a CME in interplanetary space (ICME). The characteristics of the field and plasma in the fast flow around the reverse shock is typical for a high speed stream. Thus the shock pair here appears to be caused by the interaction of a high speed stream with a slow ICME. The fact that a -B(z) event occurred in such a shock pair suggests that the slow ICME is disconnected from the sun. It is shown that compression alone appears to be adequate to explain the large southward IMF component within the shocked plasma because of the large southward field component present in the ICME ahead of the forward shock. In addition, a new method to infer the shock angle and Mach number from the observed upstream plasma B and the jump ratios of proton density and total magnetic flux density across a shock is described.

Zhao, Xuepu↗