Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiscale Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Multiscale CFD simulation of biomass fast pyrolysis with a machine learning derived intra-particle model and detailed pyrolysis kinetics

Coupling particle and reactor scale models is as essential as reactor fluid dynamics and particle motion for accurate Computational Fluid Dynamic (CFD) simulations of biomass fast pyrolysis reactors due to intraparticle heat transfer and chemical reactions controlling conversion time and product distributions. Direct online coupling of a particle model with a reactor model is computationally expensive, while offline coupling is case-dependent. In this research, solutions from a series of particle pyrolysis simulations were regressed with Artificial Neural Network (ANN). Furthermoer, this machine learning-derived model predicted the same temperature and conversion profiles compared with particle resolved simulation while the isothermal approach overpredicted the temperature by 130 K and underpredicted the conversion time by 30 s. The ANN model was then integrated into CFD simulations of fluidized bed biomass fast pyrolysis with varied feedstocks via coupling PyTorch and MFiX. The averaged error of simulation predicted bio-oil yields with four feedstocks is 6.4%. This multi-scale approach provides an efficient tool for the coupled particle and reactor scale simulations of biomass pyrolysis.

09 BIOMASS FUELS↗

Annual PM2.5 and cardiovascular mortality rate data: Trends modified by county socioeconomic status in 2,132 US counties

This article contains data on county-level socioeconomic status for 2132 US counties and each county's average annual cardiovascular mortality rate (CMR) and fine particulate matter (PM2.5) concentration for 21 years (1990e2010). County CMR, PM2.5, and socioeconomic data were obtained from the US National Center for Health Statistics, US Environmental Protection Agency's Community Multiscale Air Quality modeling system, and the US Census, respectively. Annual socioeconomic indices were created using seven county-level measures from the 1990, 2000, and 2010 US Census using factor analysis. Quintiles of this index were used to generate categories of county socioeconomic status. This national data set contains data for annual PM2.5 and CMR changes over a time-period when there was a significant reduction in US air pollutants (following the enactment of the 1970 Clean Air Act). These data are associated with the article “The contribution of improved air quality to reduced cardiovascular mortality: Declines in socioeconomic differences over time” [1]. Data are stored in a comma separated value format and can be downloaded from the USEPA ScienceHub data repository (https://doi.org/10.23719/ 1506014).

Socioeconomic status↗

Preconception and early pregnancy air pollution exposures and risk of gestational diabetes mellitus

Background: Air pollution has been linked to gestational diabetes mellitus (GDM) but no studies have evaluated impact of preconception and early pregnancy air pollution exposures on GDM risk. Methods: Electronic medical records provided data on 219,952 singleton deliveries to mothers with (n=11,334) and without GDM (n=208,618). Average maternal exposures to particulate matter (PM) ≤ 2.5 μm (PM{sub 2.5}) and PM{sub 2.5} constituents, PM ≤ 10 μm (PM{sub 10}), nitrogen oxides (NO{sub x}), carbon monoxide, sulfur dioxide (SO{sub 2}) and ozone (O{sub 3}) were estimated for the 3-month preconception window, first trimester, and gestational weeks 1–24 based on modified Community Multiscale Air Quality models for delivery hospital referral regions. Binary regression models with robust standard errors estimated relative risks (RR) for GDM per interquartile range (IQR) increase in pollutant concentrations adjusted for study site, maternal age and race/ethnicity. Results: Preconception maternal exposure to NO{sub X} (RR=1.09, 95% CI: 1.04, 1.13) and SO{sub 2} (RR=1.05, 1.01, 1.09) were associated with increased risk of subsequent GDM and risk estimates remained elevated for first trimester exposure. Preconception O{sub 3} was associated with lower risk of subsequent GDM (RR=0.93, 0.90, 0.96) but risks increased later in pregnancy. Conclusion: Maternal exposures to NO{sub x} and SO{sub 2} preconception and during the first few weeks of pregnancy were associated with increased GDM risk. O{sub 3} appeared to increase GDM risk in association with mid-pregnancy exposure but not in earlier time windows. These common exposures merit further investigation. - Highlights: • Air pollution may be related to gestational diabetes (GDM). • No prior studies have examined preconception exposure. • Maternal exposure to NO{sub x} and SO{sub 2} before conception increased subsequent GDM risk. • NO{sub x} and SO{sub 2} exposure in the first seven weeks of pregnancy also increased GDM risk. • Early exposure to O{sub 3} reduced GDM risk but risk increased after 15 weeks gestation.

54 ENVIRONMENTAL SCIENCES↗

Air pollution exposure and preeclampsia among US women with and without asthma

Maternal asthma and air pollutants have been independently associated with preeclampsia but rarely studied together. Our objective was to comprehensively evaluate preeclampsia risk based on the interaction of maternal asthma and air pollutants. Preeclampsia and asthma diagnoses, demographic and clinical data came from electronic medical records for 210,508 singleton deliveries. Modified Community Multiscale Air Quality models estimated preconception, first and second trimester and whole pregnancy exposure to: particulate matter (PM)<2.5 and <10 µm, ozone, nitrogen oxides (NO{sub x}), sulfur dioxide (SO{sub 2}) and carbon monoxide (CO); PM{sub 2.5} constituents; volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs). Asthma-pollutant interaction adjusted relative risks (RR) and 95% confidence intervals (CI) for preeclampsia were calculated by interquartile range for criteria pollutants and high exposure (≥75th percentile) for PAHs and VOCs. Asthmatics had higher risk associated with first trimester NO{sub x} and SO{sub 2} and whole pregnancy elemental carbon (EC) exposure than non-asthmatics, but only EC significantly increased risk (RR=1.11, CI:1.03–1.21). Asthmatics also had a 10% increased risk associated with second trimester CO. Significant interactions were observed for nearly all VOCs and asthmatics had higher risk during all time windows for benzene, ethylbenzene, m-xylene, o-xylene, p-xylene and toluene while most PAHs did not increase risk. - Highlights: • Asthma is common in pregnancy and asthmatic women have increased preeclampsia risk. • Air pollution could differentially increase preeclampsia risk for asthmatic women. • Preeclampsia risk was higher for asthmatics than non-asthmatics after VOC exposure. • Asthmatics also had higher risk after whole pregnancy exposure to elemental carbon. • Pregnant women with asthma appear to be particularly vulnerable to air pollutants.

54 ENVIRONMENTAL SCIENCES↗

Origin of texture development in orthorhombic uranium

We study texture evolution of alpha-uranium (α-U) during plane strain compression and uniaxial compression to high strains at different temperatures. We combine a multiscale polycrystal constitutive model and detailed analysis of texture data to uncover the slip and twinning modes responsible for the formation of individual texture components. The analysis indicates that during plane strain compression, floor slip (001)[100] results in the formation of two pronounced {001}{001} texture peaks tilted 10–15° away from the normal toward the rolling direction. During both high-temperature (573 K) through-thickness compression and plane strain compression, the active slip modes are floor slip (001)[100] and chimney slip 1/2{110} <11¯0> with slightly different ratios. {130} <31¯0> deformation twinning is profuse during rolling and in-plane compression and decreases with increasing temperature, but is not as active for through-thickness compression. Lastly, we comment on some similarities between rolling textures of α-U, which has a c/a ratio of 1.734, and those that develop in hexagonal close packed metals with similarly high c/a ratios like Zn (1.856) and Cd (1.885) and are dominated by basal slip.

36 MATERIALS SCIENCE↗

Responses of gaseous sulfuric acid and particulate sulfate to reduced SO 2 concentration: A perspective from long-term measurements in Beijing

SO 2 concentration decreased rapidly in recent years in China due to the implementation of strict control policies by the government. Particulate sulfate ( p S O 4 2 - ) and gaseous H 2 SO 4 (SA) are two major products of SO 2 and they play important roles in the haze formation and new particle formation (NPF), respectively. We examined the change in p S O 4 2 - and SA concentrations in response to reduced SO 2 concentration using long-term measurement data in Beijing. Simulations from the Community Multiscale Air Quality model with a 2-D Volatility Basis Set (CMAQ/2D-VBS) were used for comparison. From 2013 to 2018, SO 2 concentration in Beijing decreased by ~81% (from 9.1 ppb to 1.7 ppb). p S O 4 2 - concentration in submicrometer particles decreased by ~60% from 2012–2013 (monthly average of ~10 μg·m - 3 ) to 2018–2019 (monthly average of ~4 μg·m - 3 ). Accordingly, the fraction of p S O 4 2 - in these particles decreased from 20–30% to <10%. Increased sulfur oxidation ratio was observed both in the measurements and the CMAQ/2D-VBS simulations. Despite the reduction in SO 2 concentration, there was no obvious decrease in SA concentration based on data from several measuring periods from 2008 to 2019. This was supported by the increased SA:SO 2 ratio with reduced SO 2 concentration and condensation sink. NPF frequency in Beijing between 2004 and 2019 remains relatively constant. Finally, this constant NPF frequency is consistent with the relatively stable SA concentration in Beijing, while different from some other cities where NPF frequency was reported to decrease with decreased SO 2 concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiscale influenza forecasting

Abstract Influenza forecasting in the United States (US) is complex and challenging due to spatial and temporal variability, nested geographic scales of interest, and heterogeneous surveillance participation. Here we present Dante, a multiscale influenza forecasting model that learns rather than prescribes spatial, temporal, and surveillance data structure and generates coherent forecasts across state, regional, and national scales. We retrospectively compare Dante’s short-term and seasonal forecasts for previous flu seasons to the Dynamic Bayesian Model (DBM), a leading competitor. Dante outperformed DBM for nearly all spatial units, flu seasons, geographic scales, and forecasting targets. Dante’s sharper and more accurate forecasts also suggest greater public health utility. Dante placed 1st in the Centers for Disease Control and Prevention’s prospective 2018/19 FluSight challenge in both the national and regional competition and the state competition. The methodology underpinning Dante can be used in other seasonal disease forecasting contexts having nested geographic scales of interest.

59 BASIC BIOLOGICAL SCIENCES↗

Comprehensive characterization of irradiation induced defects in ceria: Impact of point defects on vibrational and optical properties

Validation of multiscale microstructure evolution models can be improved when standard microstructure characterization tools are coupled with methods sensitive to individual point defects. We demonstrate how electronic and vibrational properties of defects revealed by optical absorption and Raman spectroscopies can be used to compliment transmission electron microscopy (TEM) and x-ray diffraction (XRD) in the characterization of microstructure evolution in ceria under non-equilibrium conditions. Experimental manifestation of non-equilibrium conditions was realized by exposing cerium dioxide (CeO2) to energetic protons at elevated temperature. Two sintered polycrystalline CeO2 samples were bombarded with protons accelerated to a few MeVs. These irradiation conditions produced a microstructure with resolvable extended defects and a significant concentration of point defects. A rate theory (RT) model was parametrized using the results of TEM, XRD, and thermal conductivity measurements to infer point defect concentrations. An abundance of cerium sublattice defects suggested by the RT model is supported by Raman spectroscopy measurements, which show peak shift and broadening of the intrinsic T2g peak and emergence of new defect peaks. Additionally, spectroscopic ellipsometry measurements performed in lieu of optical absorption reveals the presence of Ce3+ ions associated with oxygen vacancies. This work lays the foundation for a coupled approach that considers a multimodal characterization of microstructures to guide and validate complex defect evolution models.

Chauhan, Vinay S.↗

Generalized fractional approach to solving partial differential equations with arbitrary dispersion relations

The dynamics of physical systems are typically modeled by partial differential equations (PDEs). Because of the complexity in physical systems, PDE models rely on approximations or limiting cases. To model the full complexity of physical systems, it is necessary to use multiscale approaches where appropriate models are used at each level. Alternatively, complexity can be directly tackled by fractional integrodifferential equations that must be derived for each system. Here, we argue that complexity can be restored in PDEs by describing them from a fractional calculus perspective. Rather than deriving a fractional integrodifferential equation, we reinterpret the dispersion relation of the system by use of the Riesz definition, which contains the required information relating the energy and momentum space of the system and thus fully describes their dynamics. The approach is demonstrated by two examples: the Landau–Lifshitz equation in a 1D ferromagnetic chain and a modified KdV equation supporting surface gravity waves or Euler dispersion. The presented approach is applicable to fluids, soft matter, and solid-state matter and can be readily generalized to higher dimensions and more complex systems. While numerical calculations are needed to determine the fractional operator, the approach is analytical and can be utilized to determine analytical solutions and investigate nonlinear problems.

97 MATHEMATICS AND COMPUTING↗

Oxidation and microstructure of SiC f /SiC composites in moist air up to 1600°C by X‐ray tomographic characterization

Abstract SiC f /SiC composites that possess PyC or BN interface layers were fabricated and then oxidized in moist air at 1000, 1200, 1400, and 1600°C. High‐resolution CT was used for capturing 3D images and quantifying the SiC phase, mesophase, and voids. The oxidation behavior and microstructural evolution of SiC f /SiC with PyC or BN interface are discussed in this study. The microstructure of the SiC f /SiC with a PyC layer was seriously damaged in moist air at high temperature, whereas the BN interface layer enhanced the oxidation resistance of the SiC f /SiC. These results are also confirmed by using XRD, oxidation mass gain, tensile testing, and SEM measurements. The results of the oxidation behavior and microstructural evolution for SiC f /SiC oxidized in dry air are also compared with the results of this study. Comparing the SiC f /SiC with a PyC interface layer, the composite with a BN interface layer oxidized in moist air exhibits a high void growth rate and a low SiO 2 grain growth rate from 1000 to 1600°C. This work will provide guidance for predicting the service life of SiC f /SiC for multiscale damage rate models of materials at a local scale and will also provide guidance on the life service design of SiC f /SiC materials.

Lu, Zilong↗

Mortality attributable to PM 2.5 from wildland fires in California from 2008 to 2018

In California, wildfire risk and severity have grown substantially in the last several decades. Research has characterized extensive adverse health impacts from exposure to wildfire-attributable fine particulate matter (PM 2.5 ), but few studies have quantified long-term outcomes, and none have used a wildfire-specific chronic dose-response mortality coefficient. Here, we quantified the mortality burden for PM 2.5 exposure from California fires from 2008 to 2018 using Community Multiscale Air Quality modeling system wildland fire PM 2.5 estimates. We used a concentration-response function for PM 2.5 , applying ZIP code–level mortality data and an estimated wildfire-specific dose-response coefficient accounting for the likely toxicity of wildfire smoke. We estimate a total of 52,480 to 55,710 premature deaths are attributable to wildland fire PM 2.5 over the 11-year period with respect to two exposure scenarios, equating to an economic impact of $\$432$ to $\$456$ billion. These findings extend evidence on climate-related health impacts, suggesting that wildfires account for a greater mortality and economic burden than indicated by earlier studies.

60 APPLIED LIFE SCIENCES↗

Air quality and health impacts of the 2020 wildfires in California

Abstract Background Wildfires in 2020 ravaged California to set the annual record of area burned to date. Clusters of wildfires in Northern California surrounded the Bay Area covering the skies with smoke and raising the air pollutant concentrations to hazardous levels. This study uses the Fire Inventory from the National Center for Atmospheric Research database and the Community Multiscale Air Quality model to estimate the effects of wildfire emissions on air quality during the period from August 16 to October 28 of 2020. In addition, low-cost sensor data for fine particulate matter (PM 2.5 ) from the PurpleAir network is used to enhance modeled PM 2.5 concentrations. The resulting impacts on ozone and PM 2.5 are used to quantify the health impacts caused by wildfires using the Benefits Mapping and Analysis Program – Community Edition. Results Wildfire activity significantly increased direct PM 2.5 emissions and emissions of PM 2.5 and ozone precursors. Direct PM 2.5 emissions surged up to 38 times compared to an average day. Modeling results indicated that wildfires alone led to a rise in ozone daily maximum 8-h average by up to 10 ppb and exceeded PM 2.5 air quality standards in numerous locations by up to 10 times. While modeled PM 2.5 concentrations were lower than measurements, correcting these with PurpleAir data improved the accuracy. The correction using PurpleAir data increased estimates of wildfire-induced mortality due to PM 2.5 exposure by up to 16%. Conclusions The increased hospital admissions and premature mortality attributed to wildfires were found to be comparable to the health impacts avoided by strategies aimed at meeting ozone and PM2.5 air quality standards. This suggests that widespread wildfire emissions can negate years of efforts dedicated to controlling air pollution. The integration of low-cost sensor data proved invaluable in refining the estimates of health impacts from PM2.5 resulting from wildfires.

54 ENVIRONMENTAL SCIENCES↗

Imaging transient solidification behavior

Solidification processing offers the first opportunity to control microstructure, properties, and performance in metallic alloy components. Until recently, microstructural evaluations were limited to post-solidification characterization by destructive methods. We review the development of time-resolved, in situimaging techniques capable of capturing solid-liquid interfacial evolution in metallic alloys with high spatial and temporal resolution underdiverse solidification conditions relevant for applications ranging from conventional directional solidification, crystal growth, and casting,to welding and additive manufacturing. These experiments enable direct visualization of transient behaviors that would otherwise remain unknown, uniquely providinginsights into the physics that impact microstructure and defect development and strategies for microstructuralcontrol and defect mitigation. Understanding microstructural evolution and the characteristics that form under various solidification conditions is essential for the development of multiscale, experimentallyinformed predictive modeling. This is highlightedby solidification simulations that utilize in situmeasurements of solidification dynamics from state-of-the-art experimental techniques.

36 MATERIALS SCIENCE↗

One thousand soils for molecular understanding of belowground carbon cycling

While significant progress has been made in understanding global carbon (C) cycling, the mechanisms regulating belowground C fluxes and storage are still uncertain. New molecular technologies have the power to elucidate these processes, yet we have no widespread standardized implementation of molecular techniques. To address this gap, we introduce the Molecular Observation Network (MONet), a decadal vision from the Environmental Molecular Sciences Laboratory (EMSL), to develop a national network for understanding the molecular composition, physical structure, and hydraulic and biological properties of soil and water. These data are essential for advancing the next generation of multiscale Earth systems models. In this paper, we discuss the 1000 Soils Pilot for MONet, including a description of standardized sampling materials and protocols and a use case to highlight the utility of molecular-level and microstructural measurements for assessing the impacts of wildfire on soil. While the 1000 Soils Pilot generated a plethora of data, we focus on assessments of soil organic matter (SOM) chemistry via Fourier-transform ion cyclotron resonance-mass spectrometry and microstructural properties via X-ray computed tomography to highlight the effects of recent fire history in forested ecosystems on belowground C cycling. We observed decreases in soil respiration, microbial biomass, and potential enzyme activity in soils with high frequency burns. Additionally, the nominal oxidation state of carbon in SOM increased with burn frequency in surface soils. This results in a quantifiable shift in the molecular signature of SOM and shows that wildfire may result in oxidation of SOM and structural changes to soil pore networks that persist into deeper soils.

54 ENVIRONMENTAL SCIENCES↗

BETO 2021 Peer Review - FCIC Task 6: High Temperature Conversion

The impacts of feedstock variability on pyrolysis processes are significant but poorly defined. Current engineering designs are based on empirical guidelines, useful only over a narrow range of feedstock properties. The objectives of this project are to (1) Develop science-based knowledge of how feedstock attributes and operational parameters impact pyrolysis process reliability and product quality; and (2) Build an experimental and computational toolset that predicts these outcomes, enabling processes to optimize reliability and product quality. Biomass is a complex feedstock. Controlling for and testing the effects of individual attributes is very challenging. This project couples multiscale experimentation and modeling to accurately capture the fundamental physics and chemistry of biomass flow and conversion behavior in feeding and pyrolysis reactor operations. Our focus is on pine residue attributes – anatomical fraction (bark, needles, wood), particle morphology (size/shape distribution, density, porosity), and chemical composition (extractives, biopolymers, alkali metals) – that impact product quality for downstream catalytic upgrading. Because detailed pyrolysis product characterization is limited, cutting-edge analytical techniques are being developed to reveal impactful product attributes. The tools and knowledge developed here will enable integrated pyrolysis-based processes that are more robust, flexible, and market-responsive with respect to feedstock variability.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

2007 Radiation & Climate GRC ( July 29-August 3, 2007)

The theme of the fifth Gordon Research Conference on Radiation and Climate is 'Integrating multiscale measurements and models for key climate questions'. The meeting will feature lectures, posters, and discussion regarding these issues. The meeting will focus on insights from new types of satellite and in situ data and from new approaches to modeling processes in the climate system. The program on measurements will highlight syntheses of new satellite data on cloud, aerosols, and chemistry and syntheses of satellite and sub-orbital observations from field programs. The program on modeling will address both the evaluation of cloud-resolving and regional aerosol models using new types of measurements and the evidence for processes and physics missing from global models. The Conference will focus on two key climate questions. First, what factors govern the radiative interactions of clouds and aerosols with regional and global climate? Second, how well do we understand the interaction of radiation with land surfaces and with the cryosphere?

54 ENVIRONMENTAL SCIENCES↗

Multiscale convergence properties for spectral approximations of a model kinetic equation

Here in this work, we prove rigorous convergence properties for a semi-discrete, moment-based approximation of a model kinetic equation in one dimension. This approximation is equivalent to a standard spectral method in the velocity variable of the kinetic distribution and, as such, is accompanied by standard algebraic estimates of the form N -q , where N is the number of modes and q > 0 depends on the regularity of the solution. However, in the multiscale setting, the error estimate can be expressed in terms of the scaling parameter ϵ, which measures the ratio of the mean-free-path to the characteristic domain length. We show that, for isotropic initial conditions, the error in the spectral approximation is $\mathcal{O}$($ϵ^{N+1}$). More surprisingly, the coefficients of the expansion satisfy super convergence properties. In particular, the error of the ℓ th coefficient of the expansion scales like $\mathcal{O}$($ϵ^{2N}$ ) when ℓ = 0 and $\mathcal{O}$($ϵ^{2N+2-ℓ}$ ) for all 1 ≤ ℓ ≤ N. This result is significant, because the low-order coefficients correspond to physically relevant quantities of the underlying system. All the above estimates involve constants depending on N, the time t, and the initial condition. We investigate specifically the dependence on N, in order to assess whether increasing N actually yields an additional factor of ϵ in the error. Numerical tests will also be presented to support the theoretical results.

97 MATHEMATICS AND COMPUTING↗

Dynamic Phase Engineering of Bendable Transition Metal Dichalcogenide Monolayers

Current interest in two-dimensional (2D) materials is driven in part by the ability to dramatically alter their optoelectronic properties through strain and phase engineering. A combination of these approaches can be applied in quasi-2D transition metal dichalcogenide (TMD) monolayers to induce displacive structural transformations between semiconducting (H) and metallic/semimetallic (T') phases. We classify such transformations in Group VI TMDs, and formulate a multiscale, first-principles-informed modeling framework to describe evolution of microstructural domain morphologies in elastically bendable 2D monolayers. We demonstrate that morphology and mechanical response can be controlled via application of strain either uniformly or through local probes to generate functionally patterned conductive T' domains. Such systems form dynamically programmable electromechanical 2D materials, capable of rapid local switching between domains with qualitatively different transport properties. Finally, this enables dynamic “drawing” of localized conducting regions in an otherwise semiconducting TMD monolayer, opening several interesting device-relevant functionalities such as the ability to dynamically “rewire” a device in real time.

2D materials↗