Search NASA⌕ Search

SEARCH · Search NASA

Results for “PDF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Elucidation of the Local and Long-Range Structural Changes that Occur in Germanium Anodes in Lithium-Ion Batteries

Metallic germanium is a promising anode material in secondary lithium-ion batteries (LIBs) due to its high theoretical capacity (1623 mAh/g) and low operating voltage, coupled with the high lithium-ion diffusivity and electronic conductivity of lithiated Ge. Here, the lithiation mechanism of micron-sized Ge anodes has been investigated with X-ray diffraction (XRD), pair distribution function (PDF) analysis, and in-/ex-situ high-resolution Li-7 solid-state nuclear magnetic resonance (NMR), utilizing the structural information and spectroscopic fingerprints obtained by characterizing a series of relevant Li(x)Gey model compounds. In contrast to previous work, which postulated the formation of Li9Ge4 upon initial lithiation, we show that crystalline Ge first reacts to form a mixture of amorphous and crystalline Li7Ge3 (space group P32(1)2). Although Li7Ge3 was proposed to be stable in a recent theoretical study of the Li-Ge phase diagram (Morris, A. J.; Grey, C. P.; Pickard, C. J. Phys. Rev. B: Condens. Matter Mater. Phys. 2014, 90, 054111), it had not been identified in prior experimental studies. Further lithiation results in the transformation of Li7Ge3, via a series of disordered phases with related structural motifs, to form a phase that locally resembles Li7Ge2, a process that involves the gradual breakage of the Ge-Ge bonds in the Ge-Ge dimers (dumbbells) on lithiation. Crystalline Li15Ge4 then grows, with an overlithiated phase, Li15+delta Ge4, being formed at the end of discharge. This study provides comprehensive experimental evidence, by using techniques that probe short-, medium-, and long-range order, for the structural transformations that occur on electrochemical lithiation of Ge; the results are consistent with corresponding theoretical studies regarding stable lithiated LixGey phases.

Jung, Hyeyoung↗

The anomalous thermal expansion of cuprites (Cu{sub 2}O and Ag{sub 2}O) : a combined high resolution pair distribution function and geometric analysis.

The temperature-dependent local structures of cuprites (M{sub 2}O for M = Cu{sup I}, Ag{sup I}) have been probed using variable-temperature (80-500 K) high-resolution pair distribution function (PDF) analysis of X-ray scattering data measured to very high values of momentum transfer (Q{sub max} = 35 {angstrom}{sup -1}). These noble metal oxides exhibit negative thermal expansion (NTE) behavior; however, several unusual structural features and behaviors distinguish the cuprites from other NTE frameworks the structure is inverted relative to conventional NTE frameworks and Cu{sub 2}O (but not Ag{sub 2}O) shows an unusual transition from negative to positive thermal expansion behavior at higher temperature thus motivating the present in-depth analysis of the particular thermal expansion mechanisms operating here. By coupling the local structural information from the PDFs with known geometric identities of the tetrahedra that form the framework, distortions contributing to NTE have been identified and the contrasting high temperature behaviors of the two isostructural analogues have been accounted for. Specifically, we demonstrate that thermal population of low-energy vibrational modes involving the dynamic distortion of the OM{sub 4} tetrahedra, away from the regular tetrahedral geometry (through M-O-M{prime} bending), can induce a contraction of the average tetrahedral edge length (M...M{prime}) and thus contribute to the NTE effect. This mechanism operates in combination with the transverse vibrational mechanism found in conventional NTE frameworks, where increasing transverse displacement of the bridging atom (O-M-O{prime}) draws corner-bridged polyhedra closer together.

36 MATERIALS SCIENCE↗

Ethanol Electro-Oxidation on Ternary Platinum–Rhodium–Tin Nanocatalysts: Insights in the Atomic 3D Structure of the Active Catalytic Phase

Novel insights in the synthesis–structure–catalytic activity relationships of nanostructured trimetallic Pt–Rh–Sn electrocatalysts for the electrocatalytic oxidation of ethanol are reported. In particular, we identify a novel single-phase Rh-doped Pt–Sn Niggliite mineral phase as the source of catalytically active sites for ethanol oxidation; we discuss its morphology, composition, chemical surface state, and the detailed 3D atomic arrangement using high-energy (HE-XRD), atomic pair distribution function (PDF) analysis, and X-ray photoelectron spectroscopy (XPS). The intrinsic ethanol oxidation activity of the active Niggliite phase exceeded those of earlier reports, lending support to the notion that the atomic-scale neighborhood of Pt, Rh, and Sn is conducive to the emergence of active surface catalytic sites under reaction conditions. In situ mechanistic Fourier transform infrared (in situ FTIR) analysis confirms an active 12 electron oxidation reaction channel to CO 2 at electrode potentials as low as 450 mV/RHE, demonstrating the favorable efficiency of the PtRhSn Niggliite phase for C–C bond splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Size-Controlled Dissolution of Organic-Coated Silver Nanoparticles

The solubility of Ag NPs can affect their toxicity and persistence in the environment. We measured the solubility of organic-coated silver nanoparticles (Ag NPs) having particle diameters ranging from 5 to 80 nm that were synthesized using various methods, and with different organic polymer coatings including poly(vinylpyrrolidone) and gum arabic. The size and morphology of Ag NPs were characterized by transmission electron microscopy (TEM). X-ray absorption fine structure (XAFS) spectroscopy and synchrotron-based total X-ray scattering and pair distribution function (PDF) analysis were used to determine the local structure around Ag and evaluate changes in crystal lattice parameters and structure as a function of NP size. Ag NP solubility dispersed in 1 mM NaHCO{sub 3} at pH 8 was found to be well correlated with particle size based on the distribution of measured TEM sizes as predicted by the modified Kelvin equation. Solubility of Ag NPs was not affected by the synthesis method and coating as much as by their size. Based on the modified Kelvin equation, the surface tension of Ag NPs was found to be {approx}1 J/m{sup 2}, which is expected for bulk fcc (face centered cubic) silver. Analysis of XAFS, X-ray scattering, and PDFs confirm that the lattice parameter, {alpha}, of the fcc crystal structure of Ag NPs did not change with particle size for Ag NPs as small as 6 nm, indicating the absence of lattice strain. These results are consistent with the finding that Ag NP solubility can be estimated based on TEM-derived particle size using the modified Kelvin equation for particles in the size range of 5-40 nm in diameter.

36 MATERIALS SCIENCE↗

La[subscript 4]LiAuO[subscript 8] and La[subscript 2]BaPdO[subscript 5]: Comparing Two Highly Stable d[superscript 8] Square-Planar Oxides

La{sub 4}LiAuO{sub 8} and La{sub 2}BaPdO{sub 5}, two previously known oxides, are presented as model compounds for examining the role of isolated and immobilized Au{sup 3+} and Pd{sup 2+} ions in heterogeneous catalysis. Structural characterization, stability, surface composition, and electronic structure of these compounds are presented. These are examined in studies ranging from synchrotron X-ray scattering, including pair distribution function (PDF) and maximum entropy method (MEM) analysis, to density functional calculations of the electronic structures. The exceptional stability displayed by these compounds as verified by thermogravimetric analysis can be attributed to the presence of covalent Au-O and Pd-O interactions revealed in MEM studies, which suggests a criterion for stabilizing these highly oxophobic transition metals in oxide environments. Catalytic testing of the two compounds as heterogeneous catalysts in the oxidation of CO to CO{sub 2} are presented. La{sub 2}BaPdO{sub 5} appears to be an effective catalyst for CO oxidation, despite the low surface area of the oxide being used. This is the first time that a fully ordered (rather than doped) Pd{sup 2+} oxide had been used to catalyze CO oxidation. La{sub 4}LiAuO{sub 8} on the other hand, is much less effective at catalyzing CO oxidation. Differences in the reactivities of the two compounds are discussed with respect to differences in their density functional electronic structures.

43 PARTICLE ACCELERATORS↗

Novel Synthesis and Structural Analysis of Ferrihydrite

Naturally occurring ferrihydrite is both impure and difficult to isolate, so the numerous applications and interesting properties of ferrihydrite have spurred the development of various synthetic techniques. Nearly all techniques are based on the hydrolysis of an iron salt and require careful control of temperature, pH, and concentration. In this Article, we report a new synthetic method which does not require such control and is perhaps the fastest and simplest route to synthesizing ferrhydrite. XRD, TEM, BET, and chemical purity characterizations show that the chemically pure, 2-line ferrihydrite product consists of crystallites 2-6 nm in diameter which aggregate to form mesoporous, high surface area agglomerates that are attractive candidates for the many adsorption applications of ferrihydrite. X-ray PDF data were also collected for the ferrihydrite product and refined against the hexagonal structural model recently proposed by Michel et al. These analyses suggest that ferrihydrite has a consistent, repeatable structure independent of variation in the synthetic method, water content of the sample, or particle size of the crystallites, and this structure can be adequately described by the proposed hexagonal model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cubic Form of Pb 2-x Sn x S 2 Stabilized through Size Reduction to the Nanoscale

We demonstrate the synthesis of semiconductor Pb 2-x Sn x S 2 nanocrystals with a cubic rock salt crystal structure in a composition range where this structure is unstable in the bulk. The cubic Pb 2-x Sn x S 2 nanocrystals were prepared using a modified hot injection colloidal synthetic route. The x value is in the range 0.40 < x < 1. Even though these compositions lie in a region of the PbS-SnS phase diagram where no single phase exists, and despite the fact that PbSnS 2 is a distorted orthorhombic phase, the Pb 2-x Sn x S 2 nanocrystals are single phase solid solutions with cubic NaCl-type structure. Experimental evidence for this derives from powder X-ray diffraction (PXRD), electron diffraction, and pair distribution function (PDF) analysis. Elemental compositions determined using scanning transmission electron microscopy/energy dispersive spectroscopy (STEM/EDS), inductively coupled plasma-atomic emission spectroscopy (ICP-AES), and electron energy loss spectroscopy (EELS) reveal a composition close to the nominal ones. The band gaps of the Pb 2-x Sn x S 2 nanocrystals (0.52-0.57 eV) are blue-shifted by quantum confinement relative to that of the hypothetical cubic PbSnS2 phase which density functional theory (DFT) calculations show to be much narrower (0.2 eV) than in the case of orthorhombic PbSnS 2 (1.1 eV). The Pb 2-x Sn x S 2 nanocrystals exhibit a well-defined band gap in the near-IR region and are stable up to 300 °C above which they phase separate into cubic PbS and orthorhombic α-SnS.

36 MATERIALS SCIENCE↗

Revealing the Mechanisms behind SnO[subscript 2] Nanoparticle Formation and Growth during Hydrothermal Synthesis: An In Situ Total Scattering Study

The formation and growth mechanisms in the hydrothermal synthesis of SnO{sub 2} nanoparticles from aqueous solutions of SnCl{sub 4} {center_dot} 5H{sub 2}O have been elucidated by means of in situ X-ray total scattering (PDF) measurements. The analysis of the data reveals that when the tin(IV) chloride precursor is dissolved, chloride ions and water coordinate octahedrally to tin(IV), forming aquachlorotin(IV) complexes of the form [SnCl{sub x}(H{sub 2}O){sub 6-x}]{sup (4-x)+} as well as hexaaquatin(IV) complexes [Sn(H{sub 2}O){sub 6-y}(OH){sub y}]{sup (4-y)+}. Upon heating, ellipsoidal SnO{sub 2} nanoparticles are formed uniquely from hexaaquatin(IV). The nanoparticle size and morphology (aspect ratio) are dependent on both the reaction temperature and the precursor concentration, and particles as small as 2 nm can be synthesized. Analysis of the growth curves shows that Ostwald ripening only takes place above 200 C, and in general the growth is limited by diffusion of precursor species to the growing particle. The c-parameter in the tetragonal lattice is observed to expand up to 0.5% for particle sizes down to 2-3 nm as compared to the bulk value. SnO{sub 2} nanoparticles below 3-4 nm do not form in the bulk rutile structure, but as an orthorhombic structural modification, which previously has only been reported at pressures above 5 GPa. Thus, adjustment of the synthesis temperature and precursor concentration not only allows control over nanoparticle size and morphology but also the structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoscale Stabilization of New Phases in the PbTe-Sb 2 Te 3 System: Pb m Sb 2n Te m+3n Nanocrystals

A series of novel rock-salt-type Pb m Sb 2n Te m+3n nanocrystals (m = 2, 3, 4, 6, 8, and 10; n = 1 and 2) were successfully prepared using a colloidal synthesis route. These materials are stable only on the nanoscale and have no bulk analogues. Elemental compositions were determined using scanning transmission electron microscopy/energy-dispersive X-ray spectroscopy (STEM/EDS) and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The nanocrystals exhibit well-defined band energies in the mid-IR region that are nearly independent of their atomic compositions. Pb m Sb 2n Te m+3n nanocrystals behave as metastable homogeneous solid solutions at room temperature and tend to phase separate into the respective binary PbTe + Sb 2 Te 3 at 300 °C. Furthermore, pair distribution function (PDF) analysis suggests that the local structure of these Pb m Sb 2n Te m+3n nanocrystals is distorted with respect to the rock-salt structure.

Soriano, Ronald B↗

Mesoscale Effects in Electrochemical Conversion: Coupling of Chemistry to Atomic- and Nanoscale Structure in Iron-Based Electrodes

The complex coupling of atomic, chemical, and electronic transformations across multiple length scales underlies the performance of electrochemical energy storage devices. Here, the coupling of chemistry with atomic- and nanoscale structure in iron conversion electrodes is resolved by combining pair distribution function (PDF) and small-angle X-ray scattering (SAXS) analysis for a series of Fe fluorides, oxyfluorides, and oxides. The data show that the anion chemistry of the initial electrode influences the abundance of atomic defects in the Fe atomic lattice. This, in turn, is linked to different atom mobilities and propensity for particle growth. Competitive nanoparticle growth in mixed anion systems contributes to a distinct nanostructure, without the interconnected metallic nanoparticles formed for single anion systems.

36 MATERIALS SCIENCE↗

Strongly Nonlinear Optical Glass Fibers from Noncentrosymmetric Phase-Change Chalcogenide Materials

We report that the one-dimensional polar selenophosphate compounds APSe{sub 6} (A = K, Rb), which show crystal-glass phase-change behavior, exhibit strong second harmonic generation (SHG) response in both crystal and glassy forms. The crystalline materials are type-I phase-matchable with SHG coefficients {chi}{sup (2)} of 151.3 and 149.4 pm V{sup -1} for K{sup +} and Rb{sup +} salts, respectively, which is the highest among phase-matchable nonlinear optical (NLO) materials with band gaps over 1.0 eV. The glass of APSe{sub 6} exhibits comparable SHG intensities to the top infrared NLO material AgGaSe{sub 2} without any poling treatments. APSe{sub 6} exhibit excellent mid-IR transparency. We demonstrate that starting from noncentrosymmetric phase-change materials such as APSe{sub 6} (A = K, Rb), we can obtain optical glass fibers with strong, intrinsic, and temporally stable second-order nonlinear optical (NLO) response. The as-prepared glass fibers exhibit SHG and difference frequency generation (DFG) responses over a wide range of wavelengths. Raman spectroscopy and pair distribution function (PDF) analyses provide further understanding of the local structure in amorphous state of KPSe{sub 6} bulk glass and glass fiber. We propose that this approach can be widely applied to prepare permanent NLO glass from materials that undergo a phase-change process.

36 MATERIALS SCIENCE↗

Soluble semiconductors AAsSe{sub 2} (A = Li, Na) with a direct-band-gap and strong second harmonic generation : a combined experimental and theoretical study.

AAsSe{sub 2} (A = Li, Na) have been identified as a new class of polar direct-band gap semiconductors. These I-V-VI{sub 2} ternary alkali-metal chalcoarsenates have infinite single chains of (1/{infinity})[AsQ{sub 2}{sup -}] derived from corner-sharing pyramidal AsQ{sup 3} units with stereochemically active lone pairs of electrons on arsenic. The conformations and packing of the chains depend on the structure-directing alkali metals. This results in at least four different structural types for the Li1-xNaxAsSe{sub 2} stoichoimetry ({alpha}-LiAsSe{sub 2}, {beta}-LiAsSe{sub 2}, {gamma}-NaAsSe{sub 2}, and {delta}-NaAsSe{sub 2}). Single-crystal X-ray diffraction studies showed an average cubic NaCl-type structure for {alpha}-LiAsSe{sub 2}, which was further demonstrated to be locally distorted by pair distribution function (PDF) analysis. The {beta} and {gamma} forms have polar structures built of different (1/{infinity})[AsSe{sub 2}{sup -}] chain conformations, whereas the {delta} form has nonpolar packing. A wide range of direct band gaps are observed, depending on composition: namely, 1.11 eV for {alpha}-LiAsSe{sub 2}, 1.60 eV for LiAsS{sub 2}, 1.75 eV for {gamma}-NaAsSe{sub 2}, 2.23 eV for NaAsS{sub 2}. The AAsQ{sub 2} materials are soluble in common solvents such as methanol, which makes them promising candidates for solution processing. Band structure calculations performed with the highly precise screened-exchange sX-LDA FLAPW method confirm the direct-gap nature and agree well with experiment. The polar {gamma}-NaAsSe{sub 2} shows very large nonlinear optical (NLO) second harmonic generation (SHG) response in the wavelength range of 600-950 nm. The theoretical studies confirm the experimental results and show that {gamma}-NaAsSe{sub 2} has the highest static SHG coefficient known to date, 337.9 pm/V, among materials with band gaps larger than 1.0 eV.

10 SYNTHETIC FUELS↗

Metal inorganic frameworks : dynamic flexible architecture with extended pore order built from [Se{sub 3}]{sup 2-} linkers and [Re{sub 6}Se{sub 6}Br{sub 8}]{sup 2-} clusters.

A mesostructured chalcogenide built from Chevrel-type clusters [(Re{sub 6}Se{sub 6}Br{sub 2})Br{sub 6}{sup T}]{sup 2-} linked by ditopic [Se{sub 3}]{sup 2-} anions and synthesized in the presence of a cationic surfactant template is reported. This new mesophase, h-C{sub 18}PyReSeBr, exhibits remarkably well ordered hexagonal symmetry from which a reasonable structural model can be deduced on the basis of powder X-ray diffraction as well as pair distribution function (PDF) analysis. Small-angle X-ray scattering (SAXS) analysis shows that h-C{sub 18}PyReSeBr possesses an enormous interfacial area of 477 m{sup 2}/g between the inorganic framework and the guest surfactant cations, which is comparable to that of mesoporous silicas when heavy metals contained in the framework are taken into consideration. The framework of h-C{sub 18}PyReSeBr exhibits great flexibility and responds dynamically to the extraframework cations via an ion-exchange process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Local Site Disorder and Distortion in Pyrochlore High-Entropy Oxides

High-entropy oxides (HEOs) have attracted great interest in diverse fields because of their inherent opportunities to tailor and combine materials functionalities. The control of local order/disorder in the class is by extension a grand challenge toward realizing their vast potential. In this paper, we report the first examples of pyrochlore HEOs with five M-site cations, for Nd 2 M 2 O 7 , in which the local structure has been investigated by neutron diffraction and pair distribution function (PDF) analysis. The average structure of the pyrochlores is found to be orthorhombic Imma, in agreement with radius-ratio rules governing the structural archetype. The computed PDFs from density functional theory relaxed special quasirandom structure models are compared with real space PDFs in this work to evaluate M-site order/disorder. Reverse Monte Carlo combined with ab initio molecular dynamics and Metropolis Monte Carlo simulations demonstrates that Nd 2 (Ta 0.2 Sc 0.2 Sn 0.2 Hf 0.2 Zr 0.2 ) 2 O 7 is synthesized with its M-site local to nanoscale order highly randomized/disordered, while Nd 2 (Ti 0.2 Nb 0.2 Sn 0.2 Hf 0.2 Zr 0.2 ) 2 O 7+x exhibits a strong distortion of the TiO 6 octahedron and small degree of Ti chemical short-range order (SRO) on the subnanometer scale. Calculations suggest that this may be intrinsic, energetically favored SRO rather than due to sample processing. These results offer an important demonstration that the engineered variation of participating ions in HEOs, even among those with very similar radii, provides richly diverse opportunities to control local order/disorder motifs—and therefore materials properties for future designs. This work also hints at the exquisite level of detail that may be needed in computational and experimental data analysis to guide structure–property tuning in the emerging HEO materials class.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topochemical Deintercalation of Li from Layered LiNiB: toward 2D MBene

The pursuit of two-dimensional (2D) borides, MBenes, has proven to be challenging, not the least because of the lack of a suitable precursor prone to the deintercalation. Here, we studied room-temperature topochemical deintercalation of lithium from the layered polymorphs of the LiNiB compound with a considerable amount of Li stored in between [NiB] layers (33 at. % Li). Deintercalation of Li leads to novel metastable borides (Li~ 0.5 NiB) with unique crystal structures. Partial removal of Li is accomplished by exposing the parent phases to air, water, or dilute HCl under ambient conditions. Scanning transmission electron microscopy and solid-state 7 Li and 11 B NMR spectroscopy, combined with X-ray pair distribution function (PDF) analysis and DFT calculations, were utilized to elucidate the novel structures of Li~ 0.5 NiB and the mechanism of Li-deintercalation. We have shown that the deintercalation of Li proceeds via a “zip-lock” mechanism, leading to the condensation of single [NiB] layers into double or triple layers bound via covalent bonds, resulting in structural fragments with Li[NiB] 2 and Li[NiB] 3 compositions. The crystal structure of Li~ 0.5 NiB is best described as an intergrowth of the ordered single [NiB], double [NiB] 2 , or triple [NiB] 3 layers alternating with single Li layers; this explains its structural complexity. Here, the formation of double or triple [NiB] layers induces a change in the magnetic behavior from temperatureindependent paramagnets in the parent LiNiB compounds to the spin-glassiness in the deintercalated Li~ 0.5 NiB counterparts. LiNiB compounds showcase the potential to access a plethora of unique materials, including 2D MBenes (NiB).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Designing Glass and Crystalline Phases of Metal–Bis(acetamide) Networks to Promote High Optical Contrast

Owing to their high tunability and predictable structures, metal–organic materials offer a powerful platform to study glass formation and crystallization processes and to design glasses with unique properties. In this work, we report a novel series of glass-forming metal–ethylenebis(acetamide) networks that undergo reversible glass and crystallization transitions below 200 °C. The glass-transition temperatures, crystallization kinetics, and glass stability of these materials are readily tunable, either by synthetic modification or by liquid-phase blending, to form binary glasses. Pair distribution function (PDF) analysis reveals extended structural correlations in both single and binary metal–bis(acetamide) glasses and highlights the important role of metal–metal correlations during structural evolution across glass–crystal transitions. Notably, the glass and crystalline phases of a Co–ethylenebis(acetamide) binary network feature a large reflectivity contrast ratio of 4.8 that results from changes in the local coordination environment around Co centers. These results provide new insights into glass–crystal transitions in metal–organic materials and have exciting implications for optical switching, rewritable data storage, and functional glass ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗