Search NASA⌕ Search

SEARCH · Search NASA

Results for “Project Profile”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

An energy dispersive bent Laue monochromator for K-edge subtraction imaging

K-Edge Subtraction (KES) is a powerful synchrotron imaging method that allows the quantifiable determination of a contrast element (e.g. iodine) and matrix material (usually represented as water) in both projection imaging and computed tomography. A bent Laue monochromator has been developed that has very good focal and energy dispersive properties for KES. Approximately 5% of the vertical beam profile is involved in “edge crossing” energies, thus no splitter is employed as has been done with previous implementations where approximately 33% of the beam size was blocked. The beam can be narrowed vertically allowing a smaller crossover angle than a splitter based system which minimizes artifacts. The combination of good spatial resolution, energy dispersive properties, flux and a unique approach to data analysis make this system nearly ideal for KES.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

THE RESOLVED STELLAR HALO OF NGC 253

We have obtained Magellan/IMACS and Hubble Space Telescope (HST)/Advanced Camera for Surveys imaging data that resolve red giant branch stars in the stellar halo of the starburst galaxy NGC 253. The HST data cover a small area, and allow us to accurately interpret the ground-based data, which cover 30% of the halo to a distance of 30 kpc, allowing us to make detailed quantitative measurements of the global properties and structure of a stellar halo outside of the Local Group. The geometry of the halo is significantly flattened in the same sense as the disk, with a projected axis ratio of b/a {approx} 0.35 {+-} 0.1. The total stellar mass of the halo is estimated to be M{sub halo} {approx} (2.5 {+-} 1.5) x 10{sup 9} M{sub sun}, or 6% of the total stellar mass of the galaxy, and has a projected radial dependence that follows a power law of index -2.8 {+-} 0.6, corresponding to a three-dimensional power-law index of {approx} - 4. The total luminosity and profile shape that we measure for NGC 253 are somewhat larger and steeper than the equivalent values for the Milky Way and M31, but are well within the scatter of model predictions for the properties of stellar halos built up in a cosmological context. Structure within the halo is seen at a variety of scales: there is small kpc-scale density variation and a large shelf-like feature near the middle of the field. The techniques that have been developed will be essential for quantitatively comparing our upcoming larger sample of observed stellar halos to models of halo formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Witnessing the growth of the nearest galaxy cluster: thermodynamics of the Virgo Cluster outskirts

Here, we present results from Suzaku Key Project observations of the Virgo Cluster, the nearest galaxy cluster to us, mapping its X-ray properties along four long ‘arms’ extending beyond the virial radius. The entropy profiles along all four azimuths increase with radius, then level out beyond ~0.5r 200 , while the average pressure at large radii exceeds Planck Sunyaev–Zel'dovich measurements. These results can be explained by enhanced gas density fluctuations (clumping) in the cluster's outskirts. Using a standard Navarro, Frenk and White model, we estimate a virial mass, radius and concentration parameter of M 200 = 1.05 ± 0.02 × 10 14 M⊙, r 200 = 974.1 ± 5.7 kpc and c = 8.8 ± 0.2, respectively. The inferred cumulative baryon fraction exceeds the cosmic mean at r ~r 200 along the major axis, suggesting enhanced gas clumping possibly sourced by a candidate large-scale structure filament along the north–south direction. The Suzaku data reveal a large-scale sloshing pattern, with two new cold fronts detected at radii of 233 and 280 kpc along the western and southern arms, respectively. Two high-temperature regions are also identified 1 Mpc towards the south and 605 kpc towards the west of M87, likely representing shocks associated with the ongoing cluster growth. Although systematic uncertainties in measuring the metallicity for low-temperature plasma remain, the data at large radii appear consistent with a uniform metal distribution on scales of ~90 × 180 kpc and larger, providing additional support for the early chemical enrichment scenario driven by galactic winds at redshifts of 2–3.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of Wetting and Mass Transfer Properties of Organic Chemical Mixtures in Vadose Zone Materials on Groundwater Contamination by Nonaqueous Phase Liquids

Previous studies have found that organic acids, organic bases, and detergent-like chemicals change surface wettability. The wastewater and NAPL mixtures discharged at the Hanford site contain such chemicals, and their proportions likely change over time due to reaction-facilitated aging. The specific objectives of this work were to (1) determine the effect of organic chemical mixtures on surface wettability, (2) determine the effect of organic chemical mixtures on CCl4 volatilization rates from NAPL, and (3) accurately determine the migration, entrapment, and volatilization of organic chemical mixtures. Five tasks were proposed to achieve the project objectives. These are to (1) prepare representative batches of fresh and aged NAPL-wastewater mixtures, (2) to measure interfacial tension, contact angle, and capillary pressure-saturation profiles for the same mixtures, (3) to measure interphase mass transfer rates for the same mixtures using micromodels, (4) to measure multiphase flow and interphase mass transfer in large flow cell experiments, all using the same mixtures, and (5) to modify the multiphase flow simulator STOMP in order to account for updated P-S and interphase mass transfer relationships, and to simulate the impact of CCl4 in the vadose zone on groundwater contamination. Results and findings from these tasks and summarized in the attached final report.

54 ENVIRONMENTAL SCIENCES↗

Survey of Advanced Generation IV Reactor Parameters for Integrated Energy System Modeling Capabilities

This paper is to categorize and characterize advanced Generation IV nuclear reactors that are not water based according to the key parameters for the Integrated Energy Systems (IES) project[1]. A key goal of the IES project is to assess the economic viability of including an advanced nuclear reactor into an IES. The landscape of advanced reactors is heterogeneous: several unique designs with different heat profiles are currently being studied and designed. This report provides a high-level perspective of advanced reactor concepts, including primary loop nuclear output temperatures and operation schemes that could affect secondary side power production or storage. For example, this report addresses the type of thermodynamic system (Brayton, supercritical CO 2 [S-CO 2 ], etc.) and the various pressures and temperatures on the secondary side that are expected to be provided by the various primary side reactor types. Based on these characteristics, it may be possible to determine which type of nuclear power plant could be the most economical for analysis in the IES framework for power production coupled with energy storage and waste heat utilization. The results of this effort will serve as input for model development of various secondary side components, concentrating on off-the-shelf capabilities for current and near future secondary side power generation and heat rejection as simulated in TRANSFORM. Generic models can be created which are agnostic of the nuclear energy supply without violating intellectual property rights of the developer. These models can be used to make informed decisions on the economics of integrating various energy system components with nuclear plant designs. Once complete, conclusions may be drawn regarding (1) the economics, efficiency, and reliability of certain nuclear reactors, (2) certain industry processes and energy storage systems, and (3) prioritization of certain reactor types with the studied industry types.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Deep learning reconstruction of attosecond X-ray pulses from an angularly streaked 2D photoelectron momentum distribution

The Linac Coherent Light Source (LCLS) at SLAC National Accelerator Laboratory produces intense X-ray pulses using a beam of accelerated electrons. The X-ray laser enhanced attosecond pulse generation (XLEAP) project at SLAC has enabled LCLS to produce much shorter X-ray pulses than previously possible, with durations of a few hundred attoseconds. To measure the time-profile of these extremely short pulses a velocity map imaging spectrometer (VMI) was developed. The pulse duration is measured with using an angular streaking method.

Franz, Paris↗

When the Jeans Do Not Fit: How Stellar Feedback Drives Stellar Kinematics and Complicates Dynamical Modeling in Low-mass Galaxies

In low-mass galaxies, stellar feedback can drive gas outflows that generate non-equilibrium fluctuations in the gravitational potential. Using cosmological zoom-in baryonic simulations from the Feedback in Realistic Environments project, we investigate how these fluctuations affect stellar kinematics and the reliability of Jeans dynamical modeling in low-mass galaxies. We find that stellar velocity dispersion and anisotropy profiles fluctuate significantly over the course of galaxies’ starburst cycles. We therefore predict an observable correlation between star formation rate and stellar kinematics: dwarf galaxies with higher recent star formation rates should have systemically higher stellar velocity dispersions. This prediction provides an observational test of the role of stellar feedback in regulating both stellar and dark-matter densities in dwarf galaxies. We find that Jeans modeling, which treats galaxies as virialized systems in dynamical equilibrium, overestimates a galaxy’s dynamical mass during periods of post-starburst gas outflow and underestimates it during periods of net inflow. Short-timescale potential fluctuations lead to typical errors of ∼20% in dynamical mass estimates, even if full three-dimensional stellar kinematics—including the orbital anisotropy—are known exactly. When orbital anisotropy is not known a priori, typical mass errors arising from non-equilibrium fluctuations in the potential are larger than those arising from the mass-anisotropy degeneracy. However, Jeans modeling alone cannot reliably constrain the orbital anisotropy, and problematically, it often favors anisotropy models that do not reflect the true profile. If galaxies completely lose their gas and cease forming stars, fluctuations in the potential subside, and Jeans modeling becomes much more reliable.

79 ASTRONOMY AND ASTROPHYSICS↗

Minimum-fuel aerodynamic orbital plane change maneuvers

Several minimum-fuel, aerodynamically controlled, orbital plane change problems are formulated and solved as optimal control problems. A gradient projection algorithm is used to iteratively modify both the control functions, angle of attack and bank angle, and two control parameters to obtain the optimal trajectory. The atmospheric flight profile is combined with two Keplerian (two-body vacuum flight) arcs so that a complete orbit-to-orbit analysis results. The vehicle used in this investigation is the Space Transportation System Shuttle Orbiter. The effects of heat load constraint level and plane change angle are analysed.

Joosten, B. K.↗

A comparative review of bow shocks and magnetopauses

Bow shock and magnetopauses formation is discussed. Plasma and magnetic field environments of all the planets from Mercury to Saturn were measured. It was found that all the planets have bow shocks and almost all have a magnetopause. Venus is the only planet with no measurable intrinsic magnetic field and the solar wind interacts directly with Venus' ionosphere. The bow shock characteristics depend on the changing solar wind conditions. The shape of a magnetopause or any obstacle to flow depends on the three dimensional pressure profile that it presents to the solar wind. Jupiter is unusual because of the considerable amount of plasma which is contained in its magnetosphere. Magnetopause boundaries in ecliptic plane projection are modelled by segments of ellipses, matched to straight lines for the magnetotool boundaries or parabolas. Specific properties of known planetary bow shocks and magnetopauses are reviewed.

Lepping, R. P.↗

Lightning studies using LDAR and companion data sets

Research was conducted to use the KSC Lightning Detection and Ranging (LDAR) system, together with companion data, in four subprojects: weather forecasting and advisory applications of LDAR, LDAR in relation to field mill readings, lightning flash and stroke detection using LDAR, and LDAR in relation to radar reflectivity patterns and KSC wind profiler vertical velocities. The research is aimed at developing rules, algorithms, and training materials that can be used by the operational weather forecasters who issue weather advisories for daily ground operations and launches by NASA and the United States Air Force. During the summer of 1993, LDAR data was examined on an hourly basis from 14 thunderstorm days and compared to ground strike data measured by the Lightning Location and Protection (LLP) system. These data were re-examined during 1994 to identify, number, and track LDAR-detected storms continually throughout the day and avoid certain interpretation problems arising from the use of hourly files. An areal storm growth factor was incorporated into a scheme to use current mappings of LDAR-defined thunderstorms to predict future ground strikes. During the summer of 1994, extensive sets of LDAR and companion data have been collected for 16 thunderstorm days, including a variety of meteorological situations. Detailed case studies are being conducted to relate the occurence of LDAR to the radar structure and evolution of thunderstorms. Field mill (LPWS) data are being examined to evaluate the complementary nature of LDAR and LPLWS data in determining the time of beginning and ending of the ground strike threat at critical sites. A computerized lightning flash and stroke discrimination algorithm has been written that can be used to help locate the points of origin of the electrical discharges, help distinguish in-cloud, cloud-ground, and upward flashes, and perhaps determine when the threat of ground strikes has ceased. Surface wind tower (mesonet), radar, sounding, and KSC wind profiler data will be used to develop schemes to help anticipate the timing and location of new thunderstorm development. Analysis of this data will continue in graduate student research projects.

Forbes, Gregory S.↗

The axis ratio distribution of faint galaxies: Evidence for a populatin of dwarfgalaxies at I approximately 20.5

The axis ratio distribution of faint galaxies observed by the Hubble Space Telescope (HST) as part of the Medium Deep Survey (MDS) key project suggests that a very large fraction of the total population at magnitudes I greater than or equal to 20 mag consists of a class of galaxies with luminosity profile, axis ratio distribution, angular size, and color that resemble local dwarfs. We find that galaxies with exponential light profiles and small angular sizes (half-light radius less than 0.6 sec) have an axis ratio distribution that is incompatible with their being intrinsically flattened objects and is instead consistent with local elliptical galaxies. We call these objects 'Small Exponential Ellipticals.' They are most likely dwarf galaxies, and they are numerous enough that, together with irregular galaxies, they can account for most if not all of the excess in the number counts at I approximately 20-21 mag with respect to the standard no-evolution models. This may suggest that the excess number counts are best explained by dwarf-rich models with strong luminosity evolution of the dwarf galaxies. Our data also supports a very mild luminosity evolution of the giant galaxy populations, which contributes little to the excess number counts.

Im, Myungshin↗

SHADOZ in the Aura Era

We present comparisons of observed tropical and sub-tropical ozone from the Southern Hemisphere Additional Ozonesondes (SHADOZ) project with satellite measurements using Aura's Ozone Monitoring Instrument (OMI) and Microwave Limb Sounder (MLS) instruments. Satellite products of total and derived tropospheric column ozone from OMI and profiles of ozone in the UT/LS region from MLS are used.

Witte, J. C.↗

NREPS Applications for Water Supply and Management in California and Tennessee

Management of water resources is a balancing act between temporally and spatially limited sources and competitive needs which can often exceed the supply. In order to manage water resources over a region such as the San Joaquin Valley or the Tennessee River Valley, it is pertinent to know the amount of water that has fallen in the watershed and where the water is going within it. Since rain gauge networks are typically sparsely spaced, it is typical that the majority of rainfall on the region may not be measured. To mitigate this under-sampling of rainfall, weather radar has long been employed to provide areal rainfall estimates. The Next-Generation Weather Radars (NEXRAD) make it possible to estimate rainfall over the majority of the conterminous United States. The NEXRAD Rainfall Estimation Processing System (NREPS) was developed specifically for the purpose of using weather radar to estimate rainfall for water resources management. The NREPS is tailored to meet customer needs on spatial and temporal scales relevant to the hydrologic or land-surface models of the end-user. It utilizes several techniques to mitigate artifacts in the NEXRAD data from contaminating the rainfall field. These techniques include clutter filtering, correction for occultation by topography as well as accounting for the vertical profile of reflectivity. This presentation will focus on improvements made to the NREPS system to map rainfall in the San Joaquin Valley for NASA s Water Supply and Management Project in California, but also ongoing rainfall mapping work in the Tennessee River watershed for the Tennessee Valley Authority and possible future applications in other areas of the continent.

Gatlin, P.↗

A 6U CubeSat Constellation for Atmospheric Temperature and Humidity Sounding

We are currently developing a 118/183 GHz sensor that will enable observations of temperature and precipitation profiles over land and ocean. The 118/183 GHz system is well suited for a CubeSat deployment as ~10cm antenna aperture provides sufficiently small footprint sizes (is approx. 25km). This project will enable low cost, compact radiometer instrumentation at 118 and 183 GHz that would fit in a 6U CubeSat with the objective of mass-producing this design to enable a suite of small satellites to image the key geophysical parameters that are needed to improve prediction of extreme weather events. We will take advantage of past and current technology developments at JPL viz. HAMSR (High Altitude Microwave Scanning Radiometer), Advanced Component Technology (ACT'08) to enable low-mass and low-power high frequency airborne radiometers. The 35 nm InP enabling technology provides significant reduction in power consumption (Low Noise Amplifier + Mixer Block consumes 24 mW). In this paper, we will describe the design and implementation of the 118 GHz temperature sounder and 183 GHz humidity sounder instrument on the 6U CubeSat. In addition, a summary of radiometer calibration and retrieval techniques of the temperature and humidity will be discussed. The successful demonstration of this instrument on the 6U CubeSat would pave the way for the development of a constellation consisting of suite of these instruments. The proposed constellation of these 6U CubeSat radiometers would allow sampling of tropospheric temperature and humidity with fine temporal (on the order of minutes) and spatial resolution (is approx. 25 km).

radiometer↗

MPL-Net Measurements of Aerosol and Cloud Vertical Distributions at Co-Located AERONET Sites

In the early 1990s, the first small, eye-safe, and autonomous lidar system was developed, the Micropulse Lidar (MPL). The MPL acquires signal profiles of backscattered laser light from aerosols and clouds. The signals are analyzed to yield multiple layer heights, optical depths of each layer, average extinction-to-backscatter ratios for each layer, and profiles of extinction in each layer. In 2000, several MPL sites were organized into a coordinated network, called MPL-Net, by the Cloud and Aerosol Lidar Group at NASA Goddard Space Flight Center (GSFC) using funding provided by the NASA Earth Observing System. tn addition to the funding provided by NASA EOS, the NASA CERES Ground Validation Group supplied four MPL systems to the project, and the NASA TOMS group contributed their MPL for work at GSFC. The Atmospheric Radiation Measurement Program (ARM) also agreed to make their data available to the MPL-Net project for processing. In addition to the initial NASA and ARM operated sites, several other independent research groups have also expressed interest in joining the network using their own instruments. Finally, a limited amount of EOS funding was set aside to participate in various field experiments each year. The NASA Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) project also provides funds to deploy their MPL during ocean research cruises. All together, the MPL-Net project has participated in four major field experiments since 2000. Most MPL-Net sites and field experiment locations are also co-located with sunphotometers in the NASA Aerosol Robotic Network. (AERONET). Therefore, at these locations data is collected on both aerosol and cloud vertical structure as well as column optical depth and sky radiance. Real-time data products are now available from most MPL-Net sites. Our real-time products are generated at times of AERONET aerosol optical depth (AOD) measurements. The AERONET AOD is used as input to our processing routines, which calculate the aerosol layer top height and extinction profile, and our MPL calibration value. A variety of other data products are available or under development. We present an overview of the MPL-Net project and discuss data products useful to the AERONET community. Results from several sites and field experiments will be presented.

Welton, Ellsworth J.↗

Profiling at Oliktok Point to Enhance Year of Polar Prediction Experiments (POPEYE) Science Plan

The arctic region is rapidly evolving, and enhanced predictive capabilities, for both weather and climate, are urgently required. Therefore, the international community has formulated plans for the execution of an extended period of focused observations and modeling of the arctic environment, dubbed the “Year of Polar Prediction” or YOPP. The YOPP will feature “special observing periods” (SOPs), with the first occurring in the spring of 2018, and a second during the late summer and early fall. This project deploys additional U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) facility resources to Oliktok Point, Alaska during the second three-month special observing period (1 July 2018-30 September 2018). These resources include additional radiosondes (1 more per day), ARM-operated unmanned aircraft (DH2) and ARM-operated tethered balloon systems (TBS). These instruments will conduct routine profiling activities over the course of the SOP to obtain measurements of atmospheric thermodynamic structure, cloud and precipitation properties, and aerosol properties, enhancing the measurements obtained from the third ARM Mobile Facility at Oliktok Point (AMF3). We anticipate that these measurements will be used for a variety of purposes, including: 1) to conduct detailed studies of arctic cloud and aerosol processes; 2) to inform YOPP modeling efforts through real-time availability for assimilation into operational and research analysis products; 3) to evaluate and improve retrieval algorithms involving ARM remote sensors; 4) to evaluate and improve a variety of modeling tools being used to forecast arctic weather and climate; and 5) to initialize and evaluate simulations associated with a potential arctic large-eddy simulation (LES) framework similar to the ongoing LES ARM Symbiotic Simulation and Observation (LASSO) project.

Arctic processes, Oliktok Point, Year of Polar Pre↗

Outcomes of 7 Years of Airborne Trace Gas Measurements over California and Nevada: The Alpha Jet Atmospheric eXperiment (AJAX)

The Alpha Jet Atmospheric eXperiment (AJAX) has been flying a scientific payload since January 2011 measuring ozone, carbon dioxide, methane, formaldehyde and meteorological parameters up to 9 kilometers. AJAX is located and operated from the San Francisco Bay Area and has flown a total of 229 flights, on a regular basis (approximately 3 per month) over all seasons cataloguing a long-term record of trace gas concentrations over California and Nevada. The AJAX project focuses on science questions which benefit from routine, frequent observations with flexible scheduling. This presentation will provide an overview of AJAX activities including a discussion of airborne measurements for: Long-Range Transport (LRT) and Stratosphere-to-Troposphere Transport (STT). Regular sampling by AJAX has aided identification of LRT and evidence of STT, which during spring and summer months are visible as elevated O3 laminae within airborne profiles. Some laminae have the ability to impact surface level air quality; Satellite validation - Regular AJAX missions include flights to Railroad Valley, NV in coordination with GOSAT (Greenhouse Gases Observing Satellite) and OCO-2 (Carbon Observatory-2) observations, and more recently to provide coincident measurements under TROPOMI (TROPOspheric Monitoring Instrument); The AJAX project is uniquely flexible to incorporate specialized flights with limited planning notice, such as sampling emissions from California wildfires. Nine wildfires have been sampled, with some more than once allowing to observe emission changes as the fire progresses; Pandora validation - Future work will include development of flight strategies for validation of ground based Pandora spectrometers.

Yates, Emma L.↗

Plasma confinement state classification in fusion power plants: Profile reflectometer and ensemble diagnostics

As Fusion Pilot Plants (FPPs) are increasingly viewed as within reach, many engineering challenges remain. Not many diagnostics are expected to be available in a reactor environment. Survivability, maintainability, and limited port space substantially restrict the number of FPP-relevant diagnostics. One remaining challenge is developing tools and devices to extract plasma state information necessary for controlling an FPP from a limited subset of diagnostics. This work is part of an overarching project to address this challenge. The specific diagnostic subset to be used in FPPs is still under debate. We take the approach of developing machine-learning-based tools for different significant plasma state parameters, using already known FPP-viable diagnostics. Previously we developed a plasma confinement mode classifier utilizing the Electron Cyclotron Emission (ECE) diagnostic. Here, we expand on this by developing a Profile Reflectometer (PR) based classifier with 97% test accuracy, and an ensemble model that combines the ECE and PR models into a single model, achieving 99% test accuracy.

Clark, Randall [Univ. of California, San Diego, CA↗