Search NASA⌕ Search

SEARCH · Search NASA

Results for “SOLAR PROGRAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Project 5S: A Safe Stepping Stone into the Solar System

The human exploration program, at least in NASA, has been directed to move beyond the Moon and travel on a flexible path into the solar system. Reaching a Near-Earth Asteroid (NEA) is a major human space flight goal but such missions have tight times and life-support requirements that require huge steps from current capabilities. An objective between the Moon and a NEA is needed. Example interim objectives are the Lagrangian points in either the Sun-Earth or Earth-Moon (EM) system. The nearest of these points beyond the Moon is E-M L2. The Lagrangian points are empty (as far as we know). As objectives for human flight,it has been argued that they suffer from a lack of public interest and of meaningful objectives for astronaut operations. To provide a physical target, a robotic spacecraft could retrieve a small NEA and bring it to a Lagrangian or other nearer-Earth point to be accessed and utilized for human-mission objectives. This paper reports on the results of a recently completed study of an asteroid retrieval mission sponsored by the Keck Institute for Space Studies (KISS) at the California Institute of Technology. The study included an evaluation of potential targets, mission objectives, mission and system design, and potential capture mechanisms. The study concluded that, while challenging, there are no fundamental show stoppers and that such a mission would be possible with technology expected to be available in this decade. The final destination selected (for safety and mission operations) was high lunar orbit. Two options for target selection are considered: (i) retrieving a small (7 meter) NEA with a mass of order 500,000 kg, and (ii) taking a similar size boulder of a large known carbonaceous NEA. Several areas of technology and program requirements were identified, but the most important conclusion was that this approach enables meeting a goal of humans going to a NEA by the mid-2020s. The advantages and benefits for human exploration are considerable as are the advances that would be made in space-resource utilization and science for further exploration and development of the solar system. The combination of the robotic mission to move the asteroid and the human mission to go to its new destination and conduct astronaut operations there would provide a boost and purpose to human space flight.

asteroid retrieval↗

FOCUSing on Innovative Solar Technologies

Many of ARPA-E’s technology programs seek to break down silos and build new technological communities around a specific energy challenge. In this video, ARPA-E’s Deputy Director for Technology Eric Rohlfing, discusses how the Full-Spectrum Optimized Conversion and Utilization of Sunlight (FOCUS) program is bringing together the photovoltaic (PV) and concentrated solar power (CSP) communities to develop hybrid solar energy systems. This video features interviews with innovators from the FOCUS project team made up by Arizona State University and the University of Arizona, and showcases how the FOCUS program is combining.

14 SOLAR ENERGY↗

Solar-wind composition experiment

The Apollo program techniques for studying elemental and isotopic abundances in the solar wind are described. During Apollo 11, 12, 14 and 15 missions, aluminum foils were deployed on the lunar surface as targets for collecting solar wind ions. The foils were returned to earth, and the implanted solar wind particles were analyzed. The preliminary results showing the helium and neon concentrations are presented.

Geiss, J.↗

Beneficial Integration of Energy Storage and Load Management with Photovoltaic (PV)

In recent years, a number of industry activities have aimed at addressing the integration challenges posed by the variability and uncertainty of higher penetration of renewable generation sources, like solar photovoltaic (PV) – one of the key objectives of the Sustainable and Holistic Integration of Energy Storage and Solar PV (SHINES) program launched by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE). This EPRI led Beneficial Integration of Energy Storge, and Load Management with PV project aimed to design, develop, and demonstrate end-to-end distributed energy resource (DER) integration solution to build on these activities. EPRI led project team designed and implemented a local controller that uses model predictive control (MPC) algorithm to optimally manage DERs on site by planning for a receding horizon while executing the control settings for the first step of its plan. The team has also developed a system controller to interface with the local controller to demonstrate the hierarchical control and how it can leverage DER capabilities to address challenges like over voltage and thermal limit violations which typically limits the DER hosting capacity of distribution feeders. Team has demonstrated how the local controller with optimization algorithm can effectively manage controllable loads like HVAC, water heater, and pool pumps to allow for greater integration of PV with relatively smaller energy storage system requirements. Optimal utilization of the load control can also reduce the depth of discharge of batteries to meet grid export/import limit from behind-the-meter (BTM) DERs. Proper utilization of DER capabilities via local control intelligence, like the one developed and demonstrated in this project can help the industry to address integration challenges of higher penetration of solar PV in economically efficient manner. This can help to accelerate deployment of clean renewable energy systems at lower societal cost.

14 SOLAR ENERGY↗

Terrestrial applications of FEP-encapsulated solar cell modules

The NASA-Lewis Research Center program of transferring the FEP-encapsulated solar cell technology developed for the space program to terrestrial applications is presented. The electrical power system design and the array mechanical design are described, and power systems being tested are discussed. The latter are located at NOAA-RAMOS weather stations at Sterling, Va., and Mammoth Mountain, Calif.; on the roof of the Lewis Research Center; on a NOAA-Coast Guard buoy in the Gulf of Mexico; in a U.S. Forest Service mountaintop voice repeater station in the Inyo National Forest, Calif., and in a backpack charger for portable transmitter/receivers being used in the same place. Preliminary results of testing are still incomplete, but show that rime ice can cause cracks in modular cells without damaging the FEP though, which keeps the grid lines intact, and that electrically active elements of the module must be completely sealed from salt water to prevent FEP delamination.

Forestieri, A. F.↗

Consortia Focused on Photovoltaic R&D, Manufacturing, and Testing: A Review of Existing Models and Structures

As the U.S. Department of Energy's (DOE's) Solar Energy Technologies Program prepares to initiate a new cost-shared research and development (R&D) effort on photovoltaic (PV) manufacturing, it is useful to review the experience to date with consortia focused on PV R&D, manufacturing, and testing. Information was gathered for this report by conducting interviews and accessing Web sites of 14 U.S.consortia and four European consortia, each with either a primary focus on or an emerging interest in PV technology R&D, manufacturing, or testing. Additional input was collected from several workshops held by the DOE and National Academy of Sciences (NAS) in 2009, which examined the practical steps -- including public-private partnerships and policy support -- necessary to enhance the UnitedStates' capacity to competitively manufacture photovoltaics. This report categorizes the 18 consortia into three groups: university-led consortia, industry-led consortia, and manufacturing and testing facilities consortia. The first section summarizes the organizations within the different categories, with a particular focus on the key benefits and challenges for each grouping. The secondsection provides a more detailed overview of each consortium, including the origins, goals, organization, membership, funding sources, and key contacts. This survey is a useful resource for stakeholders interested in PV manufacturing R&D, but should not imply endorsement of any of these groups.

14 SOLAR ENERGY↗

Production of Sulfur Allotropes in Electron Irradiated Jupiter Trojans Ice Analogs

In this paper, we investigate sulfur chemistry in laboratory analogs of Jupiter Trojans and Kuiper Belt Objects (KBOs). Electron irradiation experiments of CH{sub 3}OH–NH{sub 3}–H{sub 2}O and H{sub 2}S–CH{sub 3}OH–NH{sub 3}–H{sub 2}O ices were conducted to better understand the chemical differences between primordial planetesimals inside and outside the sublimation line of H{sub 2}S. The main goal of this work is to test the chemical plausibility of the hypothesis correlating the color bimodality in Jupiter Trojans with sulfur chemistry in the incipient solar system. Temperature programmed desorption (TPD) of the irradiated mixtures allows the detection of small sulfur allotropes (S{sub 3} and S{sub 4}) after the irradiation of H{sub 2}S containing ice mixtures. These small, red polymers are metastable and could polymerize further under thermal processing and irradiation, producing larger sulfur polymers (mainly S{sub 8}) that are spectroscopically neutral at wavelengths above 500 nm. This transformation may affect the spectral reflectance of Jupiter Trojans in a different way compared to KBOs, thereby providing a useful framework for possibly differentiating and determining the formation and history of small bodies. Along with allotropes, we report the production of organo-sulfur molecules. Sulfur molecules produced in our experiment have been recently detected by Rosetta in the coma of 67P/Churyumov–Gerasimenko. The very weak absorption of sulfur polymers in the infrared range hampers their identification on Trojans and KBOs, but these allotropes strongly absorb light at UV and Visible wavelengths. This suggests that high signal-to-noise ratio UV–Vis spectra of these objects could provide new constraints on their presence.

79 ASTRONOMY AND ASTROPHYSICS↗

Working with the National Center of Photovoltaics (NCPV) (Revised) (Fact Sheet)

Capabilities fact sheet for the National Center for Photovoltaics: Working with the National Center for Photovoltaics. One-sided sheet that includes projects in various areas: Technology Pathway Partnerships, CRADAs, Incubator Program, Pre-Incubator Program, Universities, Next-Generation Program, and NREL T&E.

14 SOLAR ENERGY↗

Gen 3 Particle Pilot Plant (G3P3) -- High-Temperature Particle System for Concentrating Solar Power (Phases 1 and 2)

The U.S. Department of Energy Solar Energy Technologies Office initiated the Generation 3 Concentrating Solar Power (CSP) program to achieve higher operating temperatures (>700 °C) to enable next-generation CSP high-temperature power cycles such as the supercritical CO 2 (sCO2) Brayton Cycle. Three teams were selected to pursue high-temperature gas, liquid, and solid pathways for the heat-transfer media. Phases 1 and 2, which lasted from 2018 – 2020, consisted of design, modeling, and testing activities to further de-risk each of the technologies and develop a design for construction, commissioning, and operation of a pilot-scale facility in Phase 3 (2021 – 2024). This report summarizes the activities in Phases 1 and 2 for the solid-particle pathway led by Sandia National Laboratories. In Phases 1 and 2, Sandia successfully de-risked key elements of the proposed Gen 3 Particle Pilot Plant (G3P3) by improving the design, operation, and performance of key particle component technologies including the receiver, storage bins, particle-to-sCO2 heat exchanger, particle lift, and data acquisition and controls. Modeling and testing of critical components have led to optimized designs that meet desired performance metrics. Detailed drawings, piping and instrumentation diagrams, and process flow diagrams were generated for the integrated system, and structural analyses of the assembled tower structure were performed to demonstrate compliance with relevant codes and standards. Instrumentation and control systems of key subsystems were also demonstrated. Together with Bridgers & Paxton, Bohannan Huston, and Sandia Facilities, we have completed a 100% G3P3 tower design package with stamped engineering drawings suitable for construction bid in Phase 3.

14 SOLAR ENERGY↗

Recent results from advanced research on space solar cells at NASA

The NASA program in space photovoltaic research and development encompasses a wide range of emerging options for future space power systems, and includes both cell and array technology development. The long range goals are to develop technology capable of achieving 300 W/kg for planar arrays, and 300 W/sq m for concentrator arrays. InP and GaAs planar and concentrator cell technologies are under investigation for their potential high efficiency and good radiation resistance. The Advanced Photovoltaic Solar Array (APSA) program is a near term effort aimed at demonstrating 130 W/kg beginning of life specific power using thin (62 pm) silicon cells. It is intended to be technology transparent to future high efficiency cells and provides the baseline for development of the 300 W/kg array.

Flood, Dennis J.↗

Partnering with the NCPV [Brochure]

Brochure that explains the basic partnering opportunities that exist within the National Center for Photovoltaics for industry and university groups: non-proprietary partnering opportunities, competitive solicitations, Technology Partnership Agreements, seed fund to develop Technology Partnership Agreements, Hands-On PV Experience Workshop, and NCPV Fellowship Program.

14 SOLAR ENERGY↗

Investigation of Defect Physics for Efficient, Durable and Ubiquitous Perovskite Solar Modules (Final Technical Report)

Organometal halide perovskite solar cells have experienced eye-catching improvements in its recent few years. It serves as one of the most promising candidates to replace the currently widely used silicon-based solar modules. To implement its final step to the real application, functional longevity becomes the dernier continent to conquer. As a polycrystalline material, defect plays critical role in the efficiency and stability of the perovskite solar cells. Thus, the investigation of the defect physics of the perovskite layer is indispensable in this research field. However, hard evidence and a consensus are still lacking in terms of the specific nature of the defects and their effects on performance and hysteresis, and perhaps even more importantly, there is absence of fundamental understanding of the correlations between the defects and long-term operational stability of the device. A more fundamental understanding of the nature of defects in perovskite materials is of paramount importance to progress their efficiency and durability. In this work we propose in-depth studies of correlations of defects with performance and stability of perovskite solar cells. Our project aimed 1) to investigate the defects physics in perovskite solar cells, and 2) to develop a comprehensive understanding and physical model of defects and its influence on performance and stability of perovskite solar cells. With the support from program manager, Peter Lobaccaro, and the Solar Energy Technologies Office of U.S. Department of Energy, the project ends with impact achievements. Our research results have systematically provided strategies to analyze the influences of constructive molecular configurations to the charged defects in the perovskite lattices and developed in-depth understanding of chemical additive approach to improve the perovskite solar cell performance and stability. As history has shown us, control over defect properties of semiconductor materials is the key to achieving high performance and low cost devices. Therefore, the potential impact of unlocking the understanding and manipulation of defects in perovskites is great, enabling this technology to realize SETO goals. The research project is highly productive with 18 published papers in three years in top-level journals such as Science, Nature, Nature Materials, Nature Communications, Journal of American Chemistry Society, Joule, Advanced Materials, and Nano Letters. These works have drawn great attention nationwide with notable total citations over 700 times from 2020 to 2022.

14 SOLAR ENERGY↗

Applied mechanics

Base heating by radiation from wakes of ablating vehicles, and thermal analysis program to compute solar heating effects

ABLATING NOSE CONE↗

The NASA/JPL 64-meter-diameter antenna at Goldstone, California: Project report, technical staff, tracking and data acquisition organization

The significant management and technical aspects of the JPL Project to develop and implement a 64-meter-diameter antenna at the Goldstone Deep Space Communications Complex in California, which was the first of the Advanced Antenna Systems of the National Aeronautics and Space Administration/Jet Propulsion Laboratory Deep Space Network are described. The original need foreseen for a large-diameter antenna to accomplish communication and tracking support of NASA's solar system exploration program is reviewed, and the translation of those needs into the technical specification of an appropriate ground station antenna is described. The antenna project is delineated by phases to show the key technical and managerial skills and the technical facility resources involved. There is a brief engineering description of the antenna and its closely related facilities. Some difficult and interesting engineering problems, then at the state-of-the-art level, which were met in the accomplishment of the Project, are described. The key performance characteristics of the antenna, in relation to the original specifications and the methods of their determination, are stated.

Source record↗

Low-thrust trajectory analysis for the geosynchronous mission

Methodology employed in development of a computer program designed to analyze optimal low-thrust trajectories is described, and application of the program to a Solar Electric Propulsion Stage (SEPS) geosynchronous mission is discussed. To avoid the zero inclination and eccentricity singularities which plague many small-force perturbation techniques, a special set of state variables (equinoctial) is used. Adjoint equations are derived for the minimum time problem and are also free from the singularities. Solutions to the state and adjoint equations are obtained by both orbit averaging and precision numerical integration; an evaluation of these approaches is made.

Jasper, T. P.↗

Rationale for NASA Planetary Exploration Program

The Planetary Mission Model, NASA's program of future solar system exploration for the years 1973-1990, is presented. The model is based on a continuation of the balanced exploration philosophy, tempered by a conception of the realities of technology availability and fiscal constraints. It envisions the continued use of existing spacecraft technology (i.e., Mariner, Viking, and Pioneer) with only evolutionary changes, but with the introduction of atmospheric probe technology in the late 70's. The Titan/Centaur vehicle would be in use through 1980, and solar-electric propulsion (SEP) capability would be introduced in about 1979. Beyond 1980, shuttle capability is assumed. A brief explanation of the rationale behind the sequences at the following targets is presented: Mercury, Venus, Mars, the outer planets, and comets and asteroids.

Rasool, I.↗