Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS RELAXATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Integrated characterization of CO 2 storage reservoirs on the Rock Springs Uplift combining geomechanics, geochemistry, and flow modeling

This project improves understanding of the effects CO 2 injection and storage on geomechanical, petrophysical, and other properties on two potential reservoirs, the Madison Limestone and Weber Sandstone, at the Rock Springs Uplift, southwest Wyoming. Rock physics studies, laboratory experiments, and computer simulations were employed. Two groups of rock samples were prepared, one aged with formation brine and the second aged with CO 2 -saturated formation brine and subsequently used for geomechanical, geochemical, and petrophysical testing. Rock physics studies provided a facies classification to discriminate among different lithologies and to investigate the feasibility of predicting petrophysical properties using seismic inversion. By applying a zone-wise regression relation established in this facies analysis, a 3D reservoir model was developed. It was determined that time-lapse seismic data are not feasible for monitoring CO 2 displacement at the Rock Springs Uplift or to mitigate leakage-risks situations because pressure and fluid saturation have small effects on elastic velocities and synthetic seismograms. The small variations that do occur are due to the low porosity of the sandstone and the high stiffness of the dolomite. In the Madison Limestone, mineral dissolution due to reaction with CO 2 -saturated brine was observed in highly permeable pathways while mineral precipitation happened in intergranular or micropores. Changes in pore size were quantified via Time-Domain Nuclear Magnetic Resonance transverse relaxation time (T 2 ) and diffusion coefficient distributions. As opposed to continuous injection of CO 2 -saturated brine, a subtle increase in porosity after static ‘soaking’ with CO 2 -saturated brine increases permeability due to the heterogeneity of changes in pore and pore throat sizes. Porosity-permeability relationships are fitted using a power-law function that can be adopted to model time-evolved porosity and permeability in a transport-limited CO 2 injection process. The effect of CO 2 -saturated brine on the linear elastic properties of Weber Sandstone and Madison Limestone cannot be generally concluded. Considering horizontal and vertical orientations and different confining pressures, no consistent relationship between stress (or strain) data and reaction with CO 2 -saturated brine was observed in the nonlinear plastic and post-failure regime. The change of elastic constants due to reaction with CO 2 -saturated brine is more significant in Madison Limestone than in Weber Sandstone; however, no consistent trend was observed. Reservoir simulations suggest that injectivity for Weber Sandstone is adversely impacted by low permeability. Changes in confining pressure do not impact injection rate and can be ignored while the effect of changes to pore pressure cannot. The effect of confining pressure and pore pressure on the size of the CO 2 plume in the Madison Limestone is negligible because of higher permeability. Geomechanical and petrophysical properties induced by CO 2 -brine-rock reactions were time-dependent. Simulations considered these time-dependent properties and indicate that injectivity, porosity distribution, pressure distribution and CO 2 saturation were affected.

58 GEOSCIENCES↗

The onset of electrohydrodynamic instability in isoelectric focusing

The onset of electrohydrodynamic motion associated with the imposition of an electric field across a thin layer of liquid has been investigated for the case in which the electrical conductivity varies linearly over the depth of the layer. The variation of the conductivity is due to concentration gradients in the charge-carrying solutes and its spatio-temporal evolution is represented by a convective-diffusion equation. When the viscous relaxation time is long compared to the time for charge relaxation, the analysis reveals that the neutral stability curves for the layer can be characterized by three dimensionless parameters: Ra(sub e) is equivalent to d(epsilon)E(sup 2, sub 0) Delta sigma/mu K(sub eff) sigma(sub 0), an electrical Rayleigh number; delta sigma/sigma(sub 0), the relative conductivity increment; and alpha, the transverse wave number of the disturbance. Here d is the thickness, epsilon is the dielectric constant, and mu is the viscosity of layer, E(sub 0) is the applied field strength at the lower conductivity boundary, and K(sub eff) is an effective diffusivity associated with the Brownian motion of the charge-carrying solutes. With viscous-stress-free boundaries, at which the electrical conductivity and the normal component of the electric field are prescribed, the critical Ra(sub e) is 1.504 x 10(exp 4) at a critical transverse wave number of 1.97 when Delta sigma/sigma(sub 0) is 10. As Delta sigma/sigma(sub 0) increases, the critical Ra(sub e) increases and shifts to shorter wavelength disturbances; the critical imposed field strength, however, passes through a minimum because the lower-conductivity boundary exerts a considerable stabilizing influence in the presence of steep conductivity gradients. Similar trends were obtained for liquid layers with rigid boundaries.

Baygents, James C.↗

Viscoplasticity based on overstress with a differential growth law for the equilibrium stress

Two coupled, nonlinear differential equations are proposed for the modeling of the elastic and rate (time) dependent inelastic behavior of structural metals in the absence of recovery and aging. The structure of the model is close to the unified theories but contains essential differences. It is shown that the model reproduces almost elastic regions upon initial loading and in the unloading regions of the hysteresis loop. Under loading, unloading and reloading in strain control the model simulated the experimentally observed sharp transition from nearly elastic to inelastic behavior. When a formulation akin to existing unified theories is adopted the almost elastic regions reduce the points and the transition upon reloading is very gradual. For different formulations the behavior under sudden in(de)creases of the strain rate by two orders of magnitude is simulated by numerical experiments and differences are noted. The model represents cyclically neutral behavior and contains three constants and two positive, decreasing functions. The determination of constants and functions from monotonic loading with strain rate changes and relaxation periods is described.

Krempl, E.↗

Viscoplasticity based on overstress with a differential growth law for the equilibrium stress

Two coupled, nonlinear differential equations are proposed for the modeling of the elastic and rate (time) dependent inelastic behavior of structural metals in the absence of recovery and aging. The structure of the model is close to the unified theories but contains essential differences. It is shown that the model reproduces almost elastic regions upon initial loading and in the unloading regions of the hysteresis loop. Under loading, unloading and reloading in strain control the model simulated the experimentally observed sharp transition from nearly elastic to inelastic behavior. When a formulation akin to existing unified theories is adopted the almost elastic regions reduce the points and the transition upon reloading is very gradual. For different formulations the behavior under sudden in(de)creases of the strain rate by two orders of magnitude is simulated by numerical experiments and differences are noted. The model represents cyclically neutral behavior and contains three constants and two positive, decreasing functions. The determination of constants and functions from monotonic loading with strain rate changes and relaxation periods is described.

Krempl, E.↗

Effect of resistance training on muscle use during exercise

This study examined the effect of resistance training on exercise-induced contrast shift in magnetic resonance (MR) images. It was hypothesized that a given load could be lifted after training with less muscle showing contrast shift, thereby suggesting less muscle was used to perform the exercise. Nine males trained the left quadriceps femoris (QF) muscle 2 days/wk for 9 wk using 3-6 sets of 12 knee extensions each day. The right QF served as a control. Exercise-induced contrast shifts in MR images evoked by each of three bouts of exercise (5 sets of 10 knee extensions with a load equal to 50, 75, and 100% of the maximum pretraining load that could be lifted for 5 sets of 10 repetitions) were quantified pre- and posttraining. MR image contrast shift was quantified by determining QF cross-sectional area (CSA) showing increased spin-spin relaxation time. One repetition maximum increased 14% in the left trained QF and 7% in the right untrained QF. Left QF CSA increased 5%, with no change in right QSF CSA. Left QF CSA showing contrast shift was less after each bout of the exercise test posttraining. This was also true, to a lesser extent, for the right QF at the higher two loads. The results suggest that short-term resistance training reduces MR image contrast shift evoked by a given effort, thereby reflecting the use of less muscle to lift the load. Because this response was evident in both trained and contralateral untrained muscle, neural factors are suggested to be responsible. The consequence of this adaptation could be to increase 'stress' per unit area of active muscle during the course of training and thereby evoke hypertrophy.

Ploutz, Lori L.↗

Multiferroic ground states in free standing perovskite-based nanodots: a density functional theory study

In this work, we use density functional theory to investigate the possibility of polar and multiferroic states in free-standing, perovskite-based nanodots at the atomic limit of miniaturization: single unit cells with terminations which allow centro-symmetry. We consider both A-O and B-O 2 terminations for three families of nanodots: (i) A = Ba with B = Ti, Zr, and Hf; (ii) A = Ca and Sr with B = Ti; and (iii) A = Na and K with B = Nb. We find all A–O terminated dots to be non-polar and to exhibit cubic symmetry (except for K 8 NbO 6 ), regardless of the presence of ferroelectricity in the bulk. In contrast, all the B–O 2 terminated nanodots considered relax to a non-cubic ground state. Rather surprisingly, all of these structures exhibit polar ground states (except NaNb 8 O 12 ). We propose a new structural parameter, the cluster tolerance factor (CTF), to determine whether a particular chemistry will result in a polar ground state nanodot, analogous to the Goldschmidt factor for bulk ferroelectrics. In addition, we find that all A–O terminated (except Ca 8 TiO 6 ) and all polar B–O 2 terminated nanodots are magnetic, where none show magnetism in the bulk. As with bulk systems, multiferroicity in the B–O 2 terminated dots originates from separation between spin density in peripheral B atoms and polarity primarily caused by the off-center central A atom. Our findings stress that surface termination plays a crucial role in determining whether ferroelectricity is completely suppressed in perovskite-based materials at their limit of miniaturization.

36 MATERIALS SCIENCE↗

PREDICTION OF OXIDE SCALE EXFOLIATION IN STEAM TUBES

Numerical simulation results are presented for the prediction of the likelihood of oxide scale exfoliation from superheater tubes. The scenarios considered involved alloys T22, TP347H, and TP347HFG subjected to a simplified operating cycle in a power plant generating supercritical steam. The states of stress and strain of the oxides grown in steam were based solely on modeling the various phenomena experienced by superheater tubes during boiler operation, current understanding of the oxidation behavior of each alloy in steam, and consideration of operating parameters such as heat flux, tube dimensions, and boiler duty cycle. Interpretation of the evolution of strain in these scales, and the approach to conditions where scale failure (hence exfoliation) is expected, makes use of the type of Exfoliation Diagrams that incorporate various cracking and exfoliation criteria appropriate for the system considered. In these diagrams, the strain accumulation with time in an oxide is represented by a strain trajectory derived from the net strain resulting from oxide growth, differences in coefficients of thermal expansion among the components, and relaxation due to creep. It was found that an oxide growing on a tube subjected to routine boiler load cycling conditions attained relatively low values of net strain, indicating that oxide failure would not be expected to occur during normal boiler operation. However, during a boiler shut-down event, strains sufficient to exceed the scale failure criteria were developed after times reasonably in accord with plant experience, with the scales on the ferritic steel failing in tension, and those on the austenitic steels in compression. The results presented illustrate that using this approach to track the state of strain in the oxide scale through all phases of boiler operation, including transitions from full-to-low load and shut-down events, offers the possibility of identifying the phase(s) of boiler operation during which oxide failure is most likely to occur.

36 MATERIALS SCIENCE↗

Three-fluid, three-dimensional magnetohydrodynamic solar wind model with eddy viscosity and turbulent resistivity

We have developed a three-fluid, three-dimensional magnetohydrodynamic solar wind model that incorporates turbulence transport, eddy viscosity, turbulent resistivity, and turbulent heating. The solar wind plasma is described as a system of co-moving solar wind protons, electrons, and interstellar pickup protons, with separate energy equations for each species. Numerical steady-state solutions of Reynolds-averaged solar wind equations coupled with turbulence transport equations for turbulence energy, cross helicity, and correlation length are obtained by the time relaxation method in the corotating with the Sun frame of reference in the region from 0.3 to 100 AU (but still inside the termination shock). The model equations include the effects of electron heat conduction, Coulomb collisions, photoionization of interstellar hydrogen atoms and their charge exchange with the solar wind protons, turbulence energy generation by pickup protons, and turbulent heating of solar wind protons and electrons. The turbulence transport model is based on the Reynolds decomposition and turbulence phenomenologies that describe the conversion of fluctuation energy into heat due to a turbulent cascade. In addition to using separate energy equations for the solar wind protons and electrons, a significant improvement over our previous work is that the turbulence model now uses an eddy viscosity approximation for the Reynolds stress tensor and the mean turbulent electric field. The approximation allows the turbulence model to account for driving of turbulence by large-scale velocity gradients. Using either a dipole approximation for the solar magnetic field or synoptic solar magnetograms from the Wilcox Solar Observatory for assigning boundary conditions at the coronal base, we apply the model to study the global structure of the solar wind and its three-dimensional properties, including embedded turbulence, heating, and acceleration throughout the heliosphere. The model results are compared with plasma and magnetic field observations on WIND, Ulysses, and Voyager 2 spacecraft.

79 ASTRONOMY AND ASTROPHYSICS↗

Challenges of relaxed n -type GaP on Si and strategies to enable low threading dislocation density

We directly show that doping type strongly affects the threading dislocation density (TDD) of relaxed GaP on Si, with n-type GaP having a TDD of ~3.1 × 10 7 cm -2 , nearly 30× higher than both p-type and unintentionally doped GaP at ~1.1 × 10 6 cm -2 . Such a high TDD is undesirable since n-GaP on Si serves as the starting point for the growth of epitaxial III-V/Si multi-junction solar cells. After highlighting additional challenges for highly n-doped GaP on Si including increased surface roughness, anisotropic strain relaxation, and inhomogeneous TDD distributions from blocking of the dislocation glide, we go on to show that the TDD of n-GaP on Si rises by 10× as the doping concentration increases from ~5 × 10 16 to ~2 × 10 18 cm -3 . Next, we investigate the effects of additional dopant choices on the TDD, determining that electronic effects dominate over solute effects on the dislocation velocity at these concentrations. Finally, we demonstrate the respective roles of compressively strained superlattices, low-temperature initiation, and lowered n-type doping concentration on reducing the TDD for n-GaP on Si. By combining all three, we attain relaxed n-GaP on Si with a TDD of 1.54(±0.20) × 10 6 cm -2 , approaching parity with p-GaP on Si. Such high-quality n-GaP on Si will play an important role in boosting the efficiency of epitaxial III-V/Si multi-junction solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Residual stress and damage-induced critical fracture on CO2 laser treated fused silica

Localized damage repair and polishing of silica-based optics using mid- and far-IR CO{sub 2} lasers has been shown to be an effective method for increasing optical damage threshold in the UV. However, it is known that CO{sub 2} laser heating of silicate surfaces can lead to a level of residual stress capable of causing critical fracture either during or after laser treatment. Sufficient control of the surface temperature as a function of time and position is therefore required to limit this residual stress to an acceptable level to avoid critical fracture. In this work they present the results of 351 nm, 3 ns Gaussian damage growth experiments within regions of varying residual stress caused by prior CO{sub 2} laser exposures. Thermally stressed regions were non-destructively characterized using polarimetry and confocal Raman microscopy to measure the stress induced birefringence and fictive temperature respectively. For 1 {approx} 40s square pulse CO{sub 2} laser exposures created over 0.5-1.25 kW/cm{sup 2} with a 1-3 mm 1/e{sup 2} diameter beam (T{sub max} {approx} 1500-3000 K), the critical damage site size leading to fracture increases weakly with peak temperature, but shows a stronger dependence on cooling rate, as predicted by finite element hydrodynamics simulations. Confocal micro-Raman was used to probe structural changes to the glass over different thermal histories and indicated a maximum fictive temperature of 1900K for T{sub max} {ge} 2000 K. The effect of cooling rate on fictive temperature caused by CO{sub 2} laser heating are consistent with finite element calculations based on a Tool-Narayanaswamy relaxation model.

42 ENGINEERING↗

Toluene Uptake and Outgassing by a 3D-Printed Silicone and the Impact on Mechanical Performance

Silicone elastomers have advantageous physical properties and are widely used in various applications. Additive manufacturing (AM) of silicones provides additional utility by enabling tunable mechanical and functional properties. However, the performance of these elastomers deteriorates over time with exposure to environmental stressors. Organic solvents and volatile organic compounds (VOCs) are stressors that can cause dimensional changes to silicones with exposure and impact the overall function. Yet, the effects of such exposure on mechanical performance, including load response (LR), are not well understood. Here, in this study, we investigated the impact of a nonpolar solvent, toluene, on AM silicone material properties and compressive load. We observed that AM silicones rapidly absorbed toluene and swelled, leading to an increase in relative LR. Toluene concentration and compression did not affect uptake or swelling rates. In contrast, outgassing rates were slower for compressed coupons compared to uncompressed specimens, attributed to geometric constraints and polymer network changes impacting toluene diffusion outward. Compression also pinned the AM silicones at an enlarged state, significantly reducing relative LR after outgassing. Depending on toluene concentrations and compression, AM silicones can remain robust against toluene exposure and recover their initial printing geometry and mechanical performance after toluene outgassing and polymer relaxation.

Materials science↗

Commonly used thiol-containing antioxidants reduce cardiac differentiation and alter gene expression ratios of sarcomeric isoforms

Highlights: • β-mercaptoethanol (BME) and monothiolglycerol (MTG) reduce cardiac differentiation. • BME and MTG treatments decrease TNNI3/TNNI1 and MLC2V/MLC2A expression ratios. • BME and MTG treatments reduce beating rates and contraction/relaxation velocities. • Trolox, a strong ROS scavenger, does not inhibit cardiac differentiation. Reactive oxygen species (ROS) scavengers such as beta-mercaptoethanol (BME) and monothiol glycerol (MTG) are extensively used in stem cell research to prevent cellular oxidative stress. However, how these antioxidant supplements impact stem cell cardiac differentiation, a process regulated by redox-signaling remains unknown. In this study, we found that removal of BME from the conventional high-glucose, serum-based differentiation medium improved cardiac differentiation efficiency by 2-3 fold. BME and MTG treatments during differentiation significantly reduced mRNA expression of cardiac progenitor markers (NKX2.5 and ISL1) as well as sarcomeric markers (MLC2A, MLC2V, TNNI3, MYH6 and MYH7), suggesting reduced cardiomyogenesis by BME or MTG. Moreover, BME and MTG altered the expression ratios between the sarcomeric isoforms. In particular, TNNI3 to TNNI1 ratio and MLC2V to MLC2A ratio were significantly lower in BME or MTG treated cells than untreated cells, implying altered cardiomyocyte phenotype and maturity. Lastly, BME and MTG treatments resulted in less frequent beating, slower contraction and relaxation velocities than untreated cells. Interestingly, none of the above-mentioned effects was observed with Trolox, a non-thiol based antioxidant, despite its strong antioxidant activity. This work demonstrates that commonly used antioxidant supplements may cause considerable changes to cellular redox state and the outcome of differentiation.

60 APPLIED LIFE SCIENCES↗

Mean-flow measurements in a supersonic three-dimensional turbulent boundary layer

Measurements are presented of the mean flow in a supersonic turbulent boundary layer subjected to a constant weak transverse pressure gradient. The temperature and longitudinal velocity and the axial shear stress were only slightly affected by the three-dimensionality but a clearly defined crossflow component appeared, in the manner suggested by theory and confirmed in earlier experiments. The flow deflection angle and transverse-velocity component achieved a self-preserving form so long as the transverse-pressure gradient remained constant, and both achieved a maximum at the sublayer edge; the deflection angle seemed to decrease again between the latter and the surface. An empirical relation was found between the pressure-gradient strength and the maximum in the crossflow, and the dependence of the latter on distance from the surface was used to test analytical crossflow predictions. The data are in general agreement with Van Den Berg's law of the wall. The data also support the so-called parabolic law following a relaxation distance, especially if inviscid gradients are accounted for, and if the normal coordinate is contracted by the compressibility transformation.

Demetriades, A.↗

Probing Multiconfigurational States by Spectroscopy: The Cerium XAS L 3 ‐edge Puzzle

Abstract The Ce L 3 edge XAS spectra of CeO 2 and cerocene [Ce(C 8 H 8 ) 2 ] were calculated with relativistic ab‐initio multireference wavefunction approaches capable of reproducing the observed spectra accurately. The study aims to resolve the decades‐long puzzle regarding the relationship between the number and relative intensities of the XAS peaks and the 4f electron occupation in the ground state (GS) versus the core‐excited states (ESs). CeO 2 and cerocene exemplify the different roles of covalent bonding and wavefunction configurational composition in the observed intensity patterns. Good agreement is found between the calculated GS 4f‐shell occupations and the value derived from XAS measurements using peak areas ( n f ). The identity of the two‐peaked Ce L 3 edge is fully rationalized from the perspective of the relaxed wavefunctions for the GS and core ESs. The states underlying the different peaks differ from each other in a surprisingly simple way that can be associated with 4f 1 vs. 4f 0 sub‐configurations. Furthermore, part of one of the cerocene spectral peaks is associated with 4f 2 sub‐configurations. The pattern therefore reveals excited states that can be interpreted in terms of Ce IV and III oxidation numbers, as long assumed, with Ce II states additionally appearing in the cerocene spectrum. While this work demonstrates the rough accuracy of the conventional approach to determining n f from Ce L 3 ‐edge XAS, limitations are highlighted in terms of the ultimate accuracy of this approach and the potential of observing new types of excited states. The need to determine the sources of n f by calculations, is stressed.

Sergentu, Dumitru‐Claudiu↗

2024 IUFRO Tree Biotechnology Conference (Aug 4-8, 2024)

The 2024 IUFRO Tree Biotechnology Conference is the biennial meeting on genomics, molecular biology, and biotechnology of forest trees, associated with the IUFRO Working Party 2.04.06. This year's meeting was held in Annapolis, MD, USA from August 4th to 8th and was hosted by Yiping Qi (University of Maryland), Edward Eisenstein (University of Maryland), Gary Coleman (University of Maryland), and Heather Coleman (Syracuse University). The conference covered seven topics over the course of five days: 1) Biological and ecological insights from OMICS, 2) Advancing technologies for targeted trait manipulation and acceptability to diverse tree species, 3) Genes, development, and physiology, 4) Translating genomics and biotechnology to practice, 5) Trees in a changing world, 6) Genetic and phenotypic diversity for breeding and genomic selection, and 7) Biotechnology for biomaterials and bioeconomy. In addition to the sessions, there were two plenary sessions, provided by John Ralph (University of Wisconsin) and Tanja Pyrhäjärvi (University of Helsinki). The meeting celebrated the second awardees of the newly created IUFRO WG 2.04.06 Award: Excellence in Forest Molecular Biology and Genomics, which was presented to Chung-Jui (C.J.) Tsai (University of Georgia). Greg Goralogia (Oregon State University) was the recipient of the associated Early Career Award. The scientific presentations at the conference highlighted cutting-edge advancements in many facets of forest biotechnology research, including applications of genomic selection in forest genetics and breeding, the use of genetic editing, tree physiology, stress response, molecular breeding, wood development, "omics" technologies, and the social and economic impacts of genetically modified (GM) trees. Scientific take homes from the meeting include the power of NMR to dissect the composition of lignin, the genomic diversity of forest trees that has enormous potential for tree improvement and the integration of systems biology with climate and geographical data. The conference attracted a mix of students (25), postdoctoral fellows (32), and scientists from academia (66) and industry (18). In all, the conference was attended by 141 registered participants, representing 20 countries that participated in 23 invited lectures (including 6 'early-career' keynotes), 27 voluntary talks and 61 poster presentations. Support for the conference was drawn from a wide variety of Academia, Industry, and Government sources, and included financial support from several tree improvement companies. Overall, the conference was a great success, providing an exceptional mix of science and social activities in a relaxed and collegial atmosphere. More information about the meeting can be found at treebiotech.org. The next meeting will be held in Stellenbosch, South Africa, in 2026, hosted jointly by Zander Myburg, Dave Drew (University of Stellenbosch,) and Sanushka Naidoo (University of Pretoria, FABI).

59 BASIC BIOLOGICAL SCIENCES↗

Chemical effects on subcritical fracture in silica from molecular dynamics simulations

Fracture toughness of silicates is reduced in aqueous environments due to water-silica interactions at the crack tip. In this paper, to investigate this effect, classical molecular dynamics (MD) simulations using the bond-order based reactive force field (ReaxFF) were used to simulate silica fracture. The chemical and mechanical aspects were separated by simulating fracture in: (a) vacuum with dynamic loading, (b) an aqueous environment with dynamic loading, and (c) an aqueous environment with static subcritical mechanical loading to track silica dissolution. The addition of water to silica fracture reduced the silica fracture toughness by ~25%, a trend consistent with experimentally reported results. Analysis of Si-O bonds in the process zone and calculations of dissipation energy associated with fracture indicated that water relaxes the entire process zone, and not just the surface. Additionally, the crack tip sharpens during fracture in water and an increased number of microscopic propagation events occur. This results in earlier fracture in systems with increasing mechanical loading in aqueous conditions, despite the lack of significant silica dissolution. Finally and therefore, the threshold for Si-O bond breakage has been lowered in the presence of water and the reduction in fracture toughness is due to structural and energetic changes in the silica, rather than specific dissolution events.

58 GEOSCIENCES↗

Straining of SiGe ultrathin films with mesoporous Si substrates

We report on the fabrication and characterization of ultrathin (down to 50 nm) tensile strained SiGe films on mesoporous Si substrates. Low temperature oxidation of the porous substrate relaxes the compressive strain in the as grown monocrystalline (mc) SiGe. Applying this method to a 50 nm thick mc-Si{sub 0.72}Ge{sub 0.28} film, a tensile strain >0.78% can be achieved without compromising crystalline quality and up to 1.45 % without the appearance of cracks.

36 MATERIALS SCIENCE↗

Neutron Diffraction Analysis of Residual Strain in High-Pressure Die Cast A383 Engine Blocks

The residual strains in three high-pressure die cast A383 engine blocks were measured using neutron diffraction. Residual strains and stresses can be generated during high-pressure die casting process due to high thermal gradients and may cause fatigue failure or dimensional distortion. Neutron diffraction can measure the residual strain distributions deep inside castings with complex geometries, because neutrons can penetrate substantially more material than x-rays. In this paper, the residual strains (in the axial and hoop directions) along the whole cylinder bridge of high-pressure die cast A383 engine blocks in as-cast and heat-treated conditions were measured by neutron diffraction methods. The effect of heat treatment on the distribution and magnitude of residual strains was also investigated. The results indicate that the residual strain in the cylinder bridge is tensile in both the axial and hoop components for both the as-cast and the heat-treated engine blocks. The residual strain in the hoop direction is bigger in magnitude than the residual strain in the axial direction. Heat treatment significantly relaxes the residual strain in the axial direction but only slightly relaxes the residual strain in the hoop direction.

36 MATERIALS SCIENCE↗