Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shuttle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

NASA/DOD earth orbit shuttle traffic models based on side by side loading of payloads

An analysis of the spacecraft configurations and space missions for the Earth Orbit Shuttle traffic model based on side-by-side loading of payloads is presented. The reusable tugs to be employed for the mission are examined. The space missions are described with respect to the following: (1) number of Earth Orbit Shuttle flights by inclination, (2) total payloads to orbit, (3) energy states required, and (4) characteristics of reusable tug.

Kincade, R. E.↗

Refurbishment cost study of the thermal protection system of a space shuttle vehicle, phase 2

Labor costs and techniques associated with the refurbishment of representative TPS and their attach concepts suitable for space shuttle application have been identified on the basis of experimental tests. Ablative and reusable surface insulation TPS configurations were designed, fabricated, and tested on a full-scale mockup. The TPS attachment methods investigated included pi-strap, multiple mechanical fasteners, key/keyway, and direct bond concepts. Techniques for performing installation, inspection, repair and replacement of TPS components were studied by examining a variety of shop procedures. Major problem areas associated with these procedures and the designs to which they were applied were analyzed for several significant parameters such as handling, gaskets between joints, repair techniques, ablator plugs, etc. Results of time and motion studies of specific maintenance tasks, simulating operational procedures, were obtained. Using these data, refurbishment labor cost projections were generated for a representative Space Shuttle orbiter.

Haas, D. W.↗

Evaluation of coated columbian alloy heat shields for space shuttle thermal protection system application. Volume 1: Phase 1 - Environmental criteria and material characterization, October 1970 - March 1972

The studies presented are directed toward establishing criteria for a niobium alloy thermal protection system for the space shuttle. Evaluation of three niobium alloys and two silicon coatings for heat shield configurations culminated in the selection of two coating/substrate combinations for environmental criteria and material characterization tests. Specimens were exposed to boost and reentry temperatures, pressure, and loads simulating a space shuttle orbiter flight profile.

Black, W. E.↗

Design guide for space shuttle low-cost payloads

A handbook is presented which delineates the principles of the new low-cost design methodology for designers of unmanned payloads to be carried by the space shuttle. The basic relationships between payload designs and program cost effects are discussed, and some concepts for designing low-cost payloads and implementing low-cost programs are given. The data are summarized from a payloads effects study of three unmanned earth satellites (OAO, a syneq orbiter, and a small research satellite), and the earth satellite design is emphasized. Brief summaries of space shuttle and space tug performance, environmental, and interface data pertinent to low-cost payload concepts are included.

Source record↗

Feedline dynamic effects on shuttle POGO stability

The transmission parameters for the dynamic characteristics of a feedline were approximated using both power and product series expansions. The feedline transfer functions of a shuttle orbiter feedline configuration were obtained using power and product series approximations of 60th, 120th, 180th, and 240th, order. Bode plots using the above polynomial approximations were obtained and the results compared with the exact solution. The exact solution to the feedline transfer function was obtained by using the transcendental terms appearing in the transmission parameters. The results show that the shuttle orbiter feedline may be modeled adequately by using polynomial approximations for the transcendental functions appearing in the transmission parameters. The power series approach was shown to be preferable to the product series method.

Dimaggio, O. D.↗

Manned space flight nuclear system safety. Volume 1: Executive summary. Part 2: Space shuttle nuclear system safety

The nuclear safety integration and operational aspects of transporting nuclear payloads to and from an earth orbiting space base by space shuttle are discussed. The representative payloads considered were: (1) zirconium hydride-Brayton power module, (2) isotope-Brayton power module, and (3) small isotope power systems or heat sources. Areas of investigation also include nuclear safety related integration and packaging as well as operational requirements for the shuttle and payload systems for all phases of the mission.

Source record↗

Space shuttle safety - A hybrid vehicle breeds new problems.

Discussion of a few novel problems raised by the design and flight plan of the space shuttle and by the dangerous cargos it might carry. Among the problems cited are those connected with the inspection of the bearings of the propellant turbopumps, particularly those of the hydrogen pump, for evidence of spalling, as well as problems arising in the inspection of the high-temperature parts of the combustor and turbine section of the airbreathing turbofan for shuttle booster and orbiter, and problems resulting from the possibility of fire hazard due to spontaneous ignition of fuel vapor in the fuel tank vapor space.

Pinkel, I. I.↗

Metallic materials for the space shuttle.

The need for further development and reevaluation of current space-vehicle materials (intended for a single mission) to meet the long-time requirements of a space shuttle is demonstrated. Leading metallic material candidates and their properties are tabulated for a delta-wing space shuttle configuration with a metallic thermal protection system.

Tavassoli, A. A.↗

Redundancy management of multiple inertial systems for Space Shuttle.

Failure detection and isolation techniques are developed for application to off-the-shelf type four-gimbaled inertial measurement units such as the KT-70 or Carousel IV. By using simulated boost and entry shuttle trajectories with specific gimbaled IMU models, failure detection thresholds are developed based upon red-line life dependent requirements and warning thresholds are given within the red-line thresholds based upon expected worst case IMU performance. Using these trajectories, established trajectory thresholds, and multiple IMU models, various failure detection and isolation techniques are evaluated for application in both powered and unpowered flight phases. The adequacy of off-the-shelf systems for both attitude and velocity detection methods is evaluated and recommendations for shuttle application are made.

Dove, D. W.↗

Extending the utility of the Space Shuttle as a space rescue vehicle.

In general, there are two ways for the Shuttle to participate in a rescue mission. In one case, the Orbiter itself will rendezvous with the distressed vehicle and will serve as the rescue vehicle. In the other case, at least one additional stage is introduced. The Shuttle merely serves as the first two stages of booster. The rescue vehicle which will rendezvous with the distressed vehicle is actually a manned rescue module provided with a propulsion capability. Aspects of increased propellant loading are discussed together with orbital refueling, and additional staging. A three-stage, single Tug configuration has a lunar orbit round trip capability of approximately 5 klb.

Perchonok, E.↗

Space science plans for the shuttle era.

Review of the current thinking on the space science, exploration, and application plans and policies that are to take advantage of the widened capabilities to be provided by the shuttle and the sortie mode of the shuttle. Present planning activities and plans for the next year are discussed.

Naugle, J. E.↗

Thermal protection optimization for the space shuttle.

This paper discusses optimal entry trajectories for the space shuttle that minimize the weight of an entry thermal protection system. The analysis was made using mathematical models of two types of thermal protection systems that were under consideration for the space shuttle: a metallic thermal protection system, and a reusable surface insulation thermal protection system. Optimal entries were generated using maximum orbiter nose temperature as a parameter. Thermal protection system weights were computed for both fixed and variable angles of attack using three-dimensional entry trajectories. Results indicated that variable angle-of-attack entries require less thermal protection system weight than entries at a constant angle of attack (35 deg) for both systems considered. Results also showed that 95 to 99 per cent of the thermal protection system weight requirement resulted from flight regimes in which the flow was still laminar.

Garcia, F., Jr.↗

Development of dispersion strengthened nickel-chromium alloy (Ni-Cr-Th-O2) sheet for space shuttle vehicles, part 1

A dispersion-strengthened alloy, TD nickel chromium (TDNiCr) is being developed for use on the thermal protection system of the space shuttle at temperatures up to 1204 C(2200 F). Manufacturing processes were developed for the fabrication of sheet and foil to specifications. The addition of aluminum to the basic TDNiCr composition provides outstanding oxidation resistance up to 1260 C(2300 F); aluminum levels of 2 to 4% are considered optimum for space shuttle application.

Klingler, L. J.↗

Space shuttle orbiter guidance, naviagation and control software functional requirements: Horizontal flight operations

The shuttle GN&C software functions for horizontal flight operations are defined. Software functional requirements are grouped into two categories: first horizontal flight requirements and full mission horizontal flight requirements. The document privides the intial step in the shuttle GN&C software design process. It also serves as a management tool to identify analyses which are required to define requirements.

Source record↗

Space Shuttle Avionics: a Redundant IMU On-Board Checkout and Redundancy Management System

A failure detection and isolation philosophy applicable to multiple off-the-shelf gimbaled IMUs are discussed. The equations developed are implemented and evaluated with actual shuttle trajectory simulations. The results of these simulations are presented for both powered and unpowered flight phases and at operational levels of four, three, and two IMUs. A multiple system checkout philosophy is developed and simulation results presented. The final task develops a laboratory test plan and defines the hardware and software requirements to implement an actual multiple system and evaluate the interim study results for space shuttle application.

Mckern, R. A.↗

Design of a space shuttle structural dynamics model

A 1/8 scale structural dynamics model of a parallel burn space shuttle has been designed. Basic objectives were to represent the significant low frequency structural dynamic characteristics while keeping the fabrication costs low. The model was derived from the proposed Grumman Design 619 space shuttle. The design includes an orbiter, two solid rocket motors (SRM) and an external tank (ET). The ET consists of a monocoque LO2 tank an interbank skirt with three frames to accept SRM attachment members, an LH2 tank with 10 frames of which 3 provide for orbiter attachment members, and an aft skirt with on frame to provide for aft SRM attachment members. The frames designed for the SRM attachments are fitted with transverse struts to take symmetric loads.

Source record↗

Interaction of the space shuttle control system with pogo

The asymmetric configuration of the space shuttle results in coupled pitch and axial vibration modes. This coupling results in interaction between the pogo and control systems. A detailed model of representative space shuttle structure, feedline, control, and engine systems revealed the coupled system may be unstable even though the pogo and control systems are stable individually. A method is developed for predicting the coupled system stability in terms of the stability of the separate systems.

Hopkins, A. S.↗

Expendable second stage reusable space shuttle booster. Volume 2: Technical summary. Book 3: Booster vehicle modifications and ground systems definition

A definition of the expendable second stage and space shuttle booster separation system is presented. Modifications required on the reusable booster for expendable second stage/payload flight and the ground systems needed to operate the expendable second stage in conjuction with the space shuttle booster are described. The safety, reliability, and quality assurance program is explained. Launch complex operations and services are analyzed.

Source record↗