Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

First principle investigation of structural and electronic properties of bulk ZnSe

Electronic and structural properties of ZnSe are investigated using plane-wave self-consistent field method within the framework of density functional theory. The pseudopotential method within the local density approximation is used for the exchange-correlation potential. The equilibrium lattice parameter, static bulk modulus and its pressure derivative are calculated. The electronic band structure, partial density of states and density of states are also obtained. The results are compared with available theoretical calculations and experimental results.

36 MATERIALS SCIENCE↗

Estimatation of talc properties after milling

As we know Talc is a natural mineral which is used in different areas for different purposes. The principle of this paper is analysis of structural properties of the natural talc therefore the different types of structural treatments were used. Talc powder was dry milled by vibration. Then the samples were alkalized by hydrochloric acid. To study its structural property the specific surface area and cumulative pore volume values of the starting material were 10.1 m{sup 2}/g and 0.09 cm{sup 3}/g. It was observed that the acid treatments were main reason to increase of the specific surface area. A small increment in the V{sub cp} was observed for all prepared samples. The treated samples were examined by using X-ray diffraction techniques.

36 MATERIALS SCIENCE↗

Structure and properties of a novel cobaltate La{sub 0.30}CoO{sub 2}

The layered cobaltate La{sub 0.30}CoO{sub 2} was prepared from Na{sub x}CoO{sub 2} precursor by a solid-state ionic exchange and was characterized by means of X-ray and neutron diffraction, magnetic, thermal and electric transport measurements. The compound consists of hexagonal sheets of edge-sharing CoO{sub 6} octahedra interleaved by lanthanum monolayers. Compared to Na{sup +} in the parent system, the La{sup 3+} ions occupy only one-third of available sites, forming a 2-dimensional superstructure. The deviation from the ideal stoichiometry La{sub 1/3}CoO{sub 2} introduces extra hole carriers into the diamagnetic LS Co{sup 3+} matrix making the sample Pauli paramagnetic. The temperature dependence of the electrical conductivity in La{sub 0.30}CoO{sub 2} follows Mott's T{sup -1/3} law up to about 400 K, which is in contrast with the standard metallic behavior in the Na{sup +} homolog possessing the same formal doping. The experiments are complemented by electronic structure calculations for La{sub 0.30}CoO{sub 2} and related Na{sub x}CoO{sub 2} systems. - Graphical abstract: Optimized superstructure of La{sub 0.3}CoO{sub 2} obtained by LDA calculation. Highlights: > A novel layered cobaltate La{sub 0.30}CoO{sub 2} was prepared by a solid-state ionic exchange. > La{sup 3+} ions are ordered and form a 2-dimensional superstructure. > Electrical conductivity of variable range hopping type up to 400 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Origin of Interfacial Carriers in SrTiO 3 –LaCrO 3 Superlattices

Emergent phenomena at complex oxide interfaces could provide the basis for a wide variety of next-generation devices, including photovoltaics and spintronics. To date, detailed characterization and computational modeling of interfacial defects, cation intermixing, and film stoichiometry have helped to explain many of the novel behaviors observed at a single heterojunction. Unfortunately, many of the techniques employed to characterize a single heterojunction are less effective for a superlattice made up of a repeating series of interfaces that induce collective interfacial phenomena throughout a film. However, these repeating interfaces present an untapped opportunity to introduce an additional degree of complexity, such as confined electric fields, that cannot be studied in a single heterojunction. In this work, we explore the properties of SrTiO3-LaCrO3 superlattices to understand the role of defects, including variations in cation stoichiometry of individual layers of the superlattice, intermixing across interfaces, and interfacial oxygen vacancies. Using x-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy electron energy-loss spectroscopy (STEM-EELS), we quantify the stoichiometry of individual layers of the superlattice and determine the degree of intermixing in these materials. By comparing these results to both density functional theory (DFT) models and STEM-EELS measurements of the Ti and Cr valence in each layer of the superlattice, we correlate different types of defects with the associated materials properties of the superlattice. We show that a combination of ab initio modeling and complementary structural characterization methods can offer unique insight into structure-property relationships in many oxide superlattice systems.

36 MATERIALS SCIENCE↗

Li-Ion Localization and Energetics as a Function of Anode Structure

Here in this work, we study the effect of carbon composite anode structure on the localization and energetics of Li-ions. A computational molecular dynamics study is combined with experimental results from neutron scattering experiments to understand the effect of composite density, crystallite size, volume fraction of crystalline carbon, and ion loading on the nature of ion storage in novel, lignin-derived composite materials. In a recent work, we demonstrated that these carbon composites display a fundamentally different mechanism for Li-ion storage than traditional graphitic anodes. The edges of the crystalline and amorphous fragments of aromatic carbon that exist in these composites are terminated by hydrogen atoms, which play a crucial role in adsorption. In this work, we demonstrate how differences in composite structure due to changes in the processing conditions alter the type and extent of the interface between the amorphous and crystalline domains, thus impacting the nature of Li-ion storage. The effects of structural properties are evaluated using a suite of pair distribution functions as well as an original technique to extract archetypal structures, in the form of three-dimensional atomic density distributions, from highly disordered systems. The energetics of Li-ion binding are understood by relating changes in the energy and charge distributions to changes in structural properties. The distribution of Li-ion energies reveals that some structures lead to greater chemisorption, while others have greater physisorption. Carbon composites with a high volume fraction of small crystallites demonstrate the highest ion storage capacity because of the high interfacial area between the crystalline and amorphous domains. Finally, at these interfaces, stable H atoms, terminating the graphitic crystallites, provide favorable sites for reversible Li adsorption.

25 ENERGY STORAGE↗

Hydrogenation induced structure and property changes in GdGa

Hydrides GdGaH{sub x} were obtained by exposing the Zintl phase GdGa with the CrB structure to a hydrogen atmosphere at pressures from 1.5 to 50 bar and temperatures from 50 to 500 °C. Structural analysis by powder X-ray diffraction suggests that conditions with hydrogen pressures in a range between 15 and 50 bar and temperatures below 500 °C afford a uniform hydride phase with the NdGaH{sub 1.66} structure (Cmcm, a=3.9867(7) Å, b=12.024(2) Å, c=4.1009(6) Å) which hosts H in two distinct positions, H1 and H2. H1 is coordinated in a tetrahedral fashion by Gd atoms, whereas H2 atoms are inserted between Ga atoms. The assignment of the NdGaH{sub 1.66} structure is corroborated by first principles DFT calculations. Modeling of phase and structure stability as a function of composition resulted in excellent agreement with experimental lattice parameters when x=1.66 and revealed the presence of five-atom moieties Ga-H2-Ga-H2-Ga in GdGaH{sub 1.66}. From in situ powder X-ray diffraction using synchrotron radiation it was established that hydrogenation at temperatures above 200 °C affords a hydride with x≈1.3, which is stable up to 500 °C, and that additional H absorption, yielding GdGaH{sub 1.66}, takes place at lower temperatures. Consequently, GdGaH{sub 1.66} desorbs H above T=200 °C. Without the presence of hydrogen, hydrides GdGaH{sub x} decompose at temperatures above 300 °C into GdH{sub 2} and an unidentified Gd-Ga intermetallics. Thus the hydrogenation of GdGa is not reversible. From magnetic measurements the Curie-Weiss constant and effective magnetic moment of GdGaH{sub 1.66} were obtained. The former indicates antiferromagnetic interactions, the latter attains a value of ~8 μ{sub B} which is typical for compounds containing Gd{sup 3+}ions. - Graphical abstract: Ferromagnetic GdGa absorbs hydrogen in two steps to yield antiferromagnetic GdGaH{sub 1.66}. Display Omitted - Highlights: • Elucidation of hydrogen uptake behavior of the rare earth gallide GdGa by in situ diffraction. • H-incorporation in GdGa leads to the formation of chain-like polyanions Ga-H-Ga-H-Ga. • H-incorporation in GdGa changes magnetism from ferromagnetic to antiferromagnetic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

APOLLO GUIDANCE AND NAVIGATION. THE HEAT TRANSFER PROPERTIES OF STRUCTURAL ELEMENTS FOR SPACE INSTRUMENTS

The primary concern of the investigations described in this report is the heat transfer properties of metallic surfaces in contact in a high vacuum environment. In order to determine possible design criterion for components that will be subjected to space environment it is essential to obtain knowledge of the temperature distribution of heat transfer across various contacting surfaces.

Beryllium Alloy↗

Evolution of the structure and properties of solution-based Ge{sub 23}Sb{sub 7}S{sub 70} thin films during heat treatment

Highlights: ► Chalcogenide films are created through a wet chemical route. ► Residual solvent in spun films degrades IR performance. ► Solvent is removed via a multi-step heat treatment. ► Impact of heat treatment on nano- and micro-scale structure is characterized. ► Infrared spectroscopy and AFM used to characterize films. - Abstract: Optical devices such as waveguides and resonators have typically been produced through standard vacuum deposition and photolithography techniques. Solution-derived chalcogenide films are presented as an alternative for devices not easily fabricated through these standard techniques; however, many details of the chemical processes involved in film deposition are still unknown. We present a detailed analysis of the formation of Ge{sub 23}Sb{sub 7}S{sub 70} films from solution: solvent removal was studied using in situ FTIR and UV–visible absorption spectroscopies during heat treatments at various temperatures, and the glass structure and glass–solvent interactions were studied through analysis of the far- and mid-IR regions, respectively. Correlations have been established between atomic-level structural aspects and macroscopic physical properties such as refractive index, band gap energies, and surface roughness.

36 MATERIALS SCIENCE↗

Additive manufacturing of nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship

Fusion-based additive manufacturing (AM) has significantly grown to fabricate Nickel-based superalloys with design freedom across multiple length scales. Several phenomena such as feedstock/energy source/melt pool interactions, solidification and phase transformations occur during fusion-based AM processes of Nickel-based superalloys, which determine the ultimate microstructure and mechanical performance of the built parts. In this review, here we elaborate a comprehensive discussion on AM Nickel-based superalloys and influential factors including feedstock characteristics (powder morphology, chemistry, contamination, flowability, recycling) and AM processing (parameters, and powder spreading/wall/balling/spattering effects) on their microstructure (micro-segregation, phases formations and grain structures), defect generation (sub-surface/internal defects, microcracks, surface roughness, and residual stress). Furthermore, the mechanical properties of AM Nickel-based superalloys such as tensile, creep and fatigue at room/elevated temperatures are analyzed in accordance with the initial, and post processing effects. Additionally, the commonly utilized modeling approaches in literature to predict the microstructure and mechanical behavior of these alloys are highlighted. Finally, the current challenges and mitigation approaches for future research are identified considering the gaps in the AM Nickel-based superalloys.

36 MATERIALS SCIENCE↗

Study of NbC thin films for soft X-ray multilayer applications

Compound materials are being used in soft x-ray and Extreme ultraviolet (EUV) optics applications. Structural properties of compound materials changes drastically when ultrathin films are formed from bulk material. Structural properties need to be investigated to determine the suitability of compound materials in soft x-ray multilayer applications. In the present study Niobium carbide (NbC) thin films were deposited using ion beam sputtering of an NbC target on Si (100) substrate. Thickness roughness and film mass density was determined from the X-ray reflectivity (XRR) data. XRR data revealed that the film mass density was increasing with increase in film thickness. For 500Ǻ thick film, mass density of 6.85 g/cm{sup 3}, close to bulk density was found. Rms roughness for all the films was less than 10Å. Local structure of NbC thin films was determined from EXAFS measurements. The EXAFS data showed an increase in Nb-C and Nb-(C)-Nb peak ratio approaches towards bulk NbC with increasing thickness of NbC. From the present study, NbC thin films were found suitable for actual use in soft x-ray multilayer applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local Structural Investigation of SmFeAsO1−xFx High Temperature Superconductors

A strong revitalization of the field of high temperature superconductivity (HTSC) has been induced recently by the discovery of T{sub C} around 26 K in F-doped LaFeAsO iron pnictides. Starting from this discovery, a huge amount of experimental data have been accumulated. This important corpus of results will allow the development of suitable theoretical models aimed at describing the basic electronic structure properties and nature of superconducting states in these fascinating new systems. A close correlation between structural features and physical properties of the normal and superconducting states has already been demonstrated in the current literature. Advanced theoretical models are also based on the close correlation with structural properties and in particular with the Fe-As tetrahedral array. As for other complex materials, a deeper understanding of their structure-properties correlation requires a full knowledge of the atomic arrangement within the structure. Here we report an investigation of the local structure in the SmFeAsO{sub 1-x}F{sub x} system carried out by means of x-ray total scattering measurements and pair distribution function analysis. The results presented indicate that the local structure of these HTSC significantly differs from the average structure determined by means of traditional diffraction techniques, in particular the distribution of Fe-As bond lengths. In addition, a model for describing the observed discrepancies is presented.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The structure and properties of single-layer and gradient-layered coatings of the Ti–Al–Si–Cr–Mo–S–N system

Using the method of microprobe analysis and transmission electron microscopy, the influence of obtaining conditions upon particular elemental composition and growth structure coatings of Ti–Al–Si–Mo–S–N system was studied. The possibility of formation and characteristics of the structural and elastic-stress state single-layer coatings with nanoscale columnar or equiaxed grains and gradient-layered, combining two types of selected structure, was defined. On the basis of hardness, tribological properties and coating hardness, a conclusion was made about the relative prospects of its use as wear-resistant coatings with a nanocrystalline structure.

36 MATERIALS SCIENCE↗

Synthesis, X-ray crystal structure, optical properties and DFT studies of a new 2D layered iodide bridged Pb(II) coordination polymer with 2,3-bis(2-pyridyl)pyrazine

The synthesis of two dimensional (2D) coordination polymer [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} (dpp=2,3-bis(2-pyridyl)pyrazine) is reported. As determined by X-ray diffraction of a twinned crystal, the dpp ligand simultaneously adopts a bis–bidentate and bis–monodentate coordination mode in the crystal structure of compound. The electronic band structure along with density of states (DOS) calculated by the DFT method indicates that the compound is an indirect band gap semiconductor. According to the DFT calculations, the observed emission of the compound at 600 nm in solid phase could be attributed to arise from an excited LLCT state (dpp-π{sup ⁎} [C-2p and N-2p states, CBs] to I-6p state [VBs]). The linear optical properties of the compound are also calculated by DFT method. The structure of the compound in solution phase is discussed based on the measured {sup 1}H NMR and fluorescence spectra in DMSO. TGA studies indicate that the compound is thermally stable up to 210 °C. - Graphical abstract: The synthesis, crystal structure and emission spectra of [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} is presented. The electronic band structure and linear optical properties of the compound are calculated by the DFT method. - Highlights: • Two dimensional [Pb{sub 2}(µ-I){sub 2}(µ-dpp-N,N,N,N)(µ-dpp-N,N)I{sub 2}]{sub n} has been prepared. • The structure of the compound is determined by XRD of a twinned crystal. • DFT calculations indicate that the compound is an indirect band gap semiconductor. • As shown by DFT calculations, the emission band of the compound is LLCT. • Solution phase structure of compound is explored by {sup 1}H NMR and emission spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and magnetic properties of irradiated Fe/Fe oxide core-shell nanoclusters

A cluster deposition method was used to produce a film of loosely aggregated particles of Fe-Fe3O4 core-shell nanoclusters with an 8 nm iron core size and 2 nm oxide shell thickness. The film of particles on a silicon substrate was irradiated with 5.5 MeV Si2+ ions to a fluence of 1016 cm-2 near room temperature, and computer simulations based on the SRIM (Stopping and Range of Ions in Matter) code show that the implanted Si species stops near the film-substrate interface. The ion irradiation creates a structural change in the film with corresponding chemical and magnetic changes. X-ray diffraction shows that the core size and chemistry stay the same but the shell becomes FeO that grows to a thickness of 17 nm. Helium ion microscopy shows that the previously separate particles have densified into a nearly continuous film. Major loop magnetic hysteresis measurements show a decrease in saturation magnetization that we attribute to the presence of the antiferromagnetic (AFM) FeO shell. First-order reversal curve measurements on the irradiated film performed with a vibrating sample magnetometer show that the AFM shell prevents the particles from interacting magnetically, leading to low coercivity from the iron core and little bias field from the core interactions. These results, and others reported previously on different compositions (Fe3O4 or FeO+Fe3N nanoclusters), show that the ion irradiation behavior of nanocluster films such as these depends strongly on the initial nanostructure and chemistry.

Environmental Molecular Sciences Laboratory↗

Tuning the properties of Ge-quantum dots superlattices in amorphous silica matrix through deposition conditions

In this work, we investigate the structural properties of Ge quantum dot lattices in amorphous silica matrix, prepared by low-temperature magnetron sputtering deposition of (Ge+SiO{sub 2})/SiO{sub 2} multilayers. The dependence of quantum dot shape, size, separation, and arrangement type on the Ge-rich (Ge + SiO{sub 2}) layer thickness is studied. We show that the quantum dots are elongated along the growth direction, perpendicular to the multilayer surface. The size of the quantum dots and their separation along the growth direction can be tuned by changing the Ge-rich layer thickness. The average value of the quantum dots size along the lateral (in-plane) direction along with their lateral separation is not affected by the thickness of the Ge-rich layer. However, the thickness of the Ge-rich layer significantly affects the quantum dot ordering. In addition, we investigate the dependence of the multilayer average atomic composition and also the quantum dot crystalline quality on the deposition parameters.

36 MATERIALS SCIENCE↗

Synthesis, structures and properties of a family of four two-dimensional coordination polymers constructed from 5-hydroxyisophthalate

Four 2D coordination polymers (CPs) with different structures containing the multifunctional ligand 5-hydroxyisophthalate (5-OH-BDC{sup 2−}), [Zn(5-OH-BDC)(btb)]·2H{sub 2}O (1), [Cd(5-OH-BDC)(btp)(H{sub 2}O)]·3H{sub 2}O (2), [Cd(5-OH-BDC)(bth){sub 2}(H{sub 2}O)]·H{sub 2}O (3) and [Pb(5-OH-BDC)]·H{sub 2}O (4) [btp=1, 3-bis(1,2,4-triazol-1-yl)propane, btb=1,4-bis(1,2,4-triazol-1-yl)butane, bth=1, 6-bis(1,2,4-triazol-1-yl)hexane] were obtained. 1–3 were synthesised hydrothermally, while 4 was obtained under ambient condition. The adjacent (2D→2D) polycatenated 2D layers of 1 polythread in a parallel manner to form an unusual 2D→3D polythreaded framework. 2 contains an undulated 2D (4, 4) network and further extends into an “embracing” double-layer structure through the C–H···π and π···π stacking interactions. 3 exhibits a non-interpenetrating 2D (4, 4)-network. 4 exhibits a 2D double-layered binodal (4, 4)-net containing oblong nanochannels with symbol (4{sup 3}6{sup 3}){sub 2}. Reversible dehydration–rehydration is observed in 1, 2 and 4, which fall within the category of “recoverable collapsing” and “guest-induced re-formation” frameworks, while 3 exhibits irreversible dehydration–rehydration behaviour. The solid state fluorescent properties of 1–4 have been investigated. -- Graphical abstract: Among four 2D CPs reported, 1 is an unusual 2D→3D polythreaded framework. 4 exhibits 2D double-layered binodal (4, 4)-net containing nanochannels. Reversible dehydration–rehydration is observed in 1, 2 and 4. Highlights: • Four 2D CPs based on 5-hydroxyisophthalate with d{sup 10} and Pb(II) ions were reported. • 1 is an unusual 2D→3D polythreaded framework. • 4 shows a binodal (4, 4)-connected 2D double-layer network with nanochannels. • The materials 1, 2 and 4 show reversible dehydration–rehydration behaviours. • Solid state fluorescent properties were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion ordering, magnetic structure and properties of the vacancy ordered perovskite Ba{sub 3}Fe{sub 3}O{sub 7}F

This article describes a detailed investigation of the crystallographic and magnetic structure of perovskite type Ba{sub 3}Fe{sub 3}O{sub 7}F by a combined analysis of X-ray and neutron powder diffraction data. Complete ordering of vacancies within the perovskite lattice could be confirmed. In addition, the structure of the anion sublattice was studied by means of the valence bond method, which suggested partial ordering of the fluoride ions on two of the six crystallographically different anion sites. Moreover, the compound was found to show G-type antiferromagnetic ordering of Fe moments, in agreement with magnetometric measurements as well as previously recorded {sup 57}Fe Mössbauer spectroscopy data. - Graphical abstract: The vacancy and anion ordered structure of Ba{sub 3}Fe{sub 3}O{sub 7}F is described together with its magnetic properties. - Highlights: • Ba{sub 3}Fe{sub 3}O{sub 7}F possesses a unique vacancy order not found for other perovskite type compounds. • The valence bond method was used to locate oxide and fluoride ions. • Fluoride ions are distributed only on two of the six anion sites in Ba{sub 3}Fe{sub 3}O{sub 7}F. • The compound shows G-type antiferromagnetic ordering of magnetic moments. • The magnetic structure could be refined in one of the maximal magnetic subgroups of the nuclear structure.

36 MATERIALS SCIENCE↗

Mo{sub 2}NiB{sub 2}-type (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} and La{sub 2}Ni{sub 3}-type (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} compounds: Crystal structure and magnetic properties

The crystal structure of new Mo{sub 2}NiB{sub 2}-type (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} (Immm, No. 71, oI10) and La{sub 2}Ni{sub 3}-type (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} (Cmce No. 64, oC20) compounds has been established using powder X-ray diffraction studies. Magnetization measurements show that the Mo{sub 2}NiB{sub 2}-type Gd{sub 2}Ni{sub 2.35}Si{sub 0.65} undergoes a ferromagnetic transition at ~66 K, whereas isostructural Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} shows an antiferromagnetic transition at ~52 K and a field-induced metamagnetic transition at low temperatures. Neutron diffraction study shows that, in zero applied field, Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} exhibits c-axis antiferromagnetic order with propagation vector K=[1/2, 0, 1/2] below its magnetic ordering temperature and Tb magnetic moment reaches a value of 8.32(5) μ{sub B} at 2 K. The La{sub 2}Ni{sub 3}-type Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} exhibits ferromagnetic like transition at ~42 K with coexisting antiferromagnetic interactions and field induced metamagnetic transition below ~17 K. The magnetocaloric effect of Gd{sub 2}Ni{sub 2.35}Si{sub 0.65}, Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} is calculated in terms of isothermal magnetic entropy change and it reaches a maximum value of −14.3 J/kg K, −5.3 J/kg K and −10.3 J/kg K for a field change of 50 kOe near 66 K, 52 K and 42 K, respectively. Low temperature magnetic ordering with enhanced anisotropic effects in Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.35}Si{sub 0.65} is accompanied by a positive magnetocaloric effect with isothermal magnetic entropy changes of +12.8 J/kg K and ~+9.9 J/kg K, respectively at 7 K for a field change of 50 kOe. - Graphical abstract: The (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} supplement the series of Mo{sub 2}NiB{sub 2}-type rare earth compounds, whereas the (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} supplement the series of La{sub 2}Ni{sub 3}-type rare earth compounds. The variation of alloy’s composition by ~3 at% i.e. from Dy{sub 2}Ni{sub 2.35}Si{sub 0.65} to Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} leads to significant transformation of crystal structure of compound with different variant of distortion of Po-type rare earth sublattice, as in Gd–Co–Ga and Er–Ni–In systems: the Mo{sub 2}NiB{sub 2}-type Gd{sub 2}Co{sub 2}Ga and La{sub 2}Ni{sub 3}-type Gd{sub 2}Co{sub 2.9}Ga{sub 0.1}, and Mo{sub 2}FeB{sub 2}-type Er{sub 2}Ni{sub 1.78}In and Mn{sub 2}AlB{sub 2}-type Er{sub 2}Ni{sub 2}In. Magnetization measurements indicate collinear ferromagnetic ordering of Mo{sub 2}NiB{sub 2}-type Gd{sub 2}Ni{sub 2.35}Si{sub 0.65} and a complex antiferromagnetic ordering with low-temperature metamagnetic nature for Mo{sub 2}NiB{sub 2}-type Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} compounds. However, neutron diffraction study in zero applied field of Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} reveals c-axis pure antiferromagnetic ordering of terbium sublattice with K=[1/2, 0, 1/2] propagation vector. Magnetization measurements indicate ferromagnetic order with coexisting antiferromagnetic interactions and low-temperature metamagnetic state for La{sub 2}Ni{sub 3}-type Dy{sub 2}Ni{sub 2.5}Si{sub 0.5}. We suggest possible polymorphism in other Mo{sub 2}FeB{sub 2}-type, Mo{sub 2}NiB{sub 2}-type, La{sub 2}Ni{sub 3}-type and Mn{sub 2}AlB{sub 2}-type rare earth compounds with corresponding change in their magnetic properties. - Highlights: • (Gd, Tb, Dy){sub 2}Ni{sub 2.35}Si{sub 0.65} compounds crystallize in the Mo{sub 2}NiB{sub 2}-type structure. • (Dy, Ho){sub 2}Ni{sub 2.5}Si{sub 0.5} compounds crystallize in the La{sub 2}Ni{sub 3}-type structure. • Gd{sub 2}Ni{sub 2.35}Si{sub 0.65} shows pure ferromagnetic type ordering. • Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} show mixed ferro-antiferromagnetic ordering. • Tb{sub 2}Ni{sub 2.35}Si{sub 0.65} and Dy{sub 2}Ni{sub 2.5}Si{sub 0.5} exhibit low-temperature metamagnetic behaviour.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗