Search NASA⌕ Search

SEARCH · Search NASA

Results for “Tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

A fine tuning free resolution of the cosmological constant problem

In a recent paper we discovered that a fermionic condensate is formed from gravitational interactions due to the covariant coupling of fermions in the presence of a torsion-fermion contact interaction.The condensate gap gives a negative contribution to the bare cosmological constant. In this letter, we show that the cosmological constant problem can be solved without fine tuning of the bare cosmological constant. We demonstrate how a universe with a large initial cosmological constant undergoes inflation, during which time the energy gap grows as the volume of the universe. Eventually the gap becomes large enough to cancel out the bare cosmological term, inflation ends and we end up in a universe with an almost vanishing cosmological term. We provide a detailed numerical analysis of the system of equations governing the self regulating relaxation of the cosmological constant.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Various Errors on the Spin Tune and Stable Spin Axis

Even though RHIC has two full Siberian snakes in each ring, there are various perturbations to the ideal case including orbit errors at the snakes, experiment solenoids, injection bumps, and interlaced horizontal-vertical bumps at the hydrogen jet polarimeter. These errors can cause depolarization by shifting the spin tune and tilting the stable spin direction away from vertical. Tilting of the stable spin axis can enhance horizontal depolarizing resonances. This paper presents preliminary results for some of these error scenarios, as well as their impact on the stable spin directions at STAR and PHENIX.

43 PARTICLE ACCELERATORS↗

Band gap tuning of Na{sub 1-x}La{sub x}Ta{sub 1-x}Cr{sub x}O{sub 3} for H{sub 2} generation from water under visible light irradiation

Semiconductors of Na{sub 1-x}La{sub x}Ta{sub 1-x}Cr{sub x}O{sub 3}(x=0-1.00) were prepared with conventional solid state reactions method. The crystal structure changed from monoclinic (x<=0.60) to orthorhombic (x>=0.70) with the modulation of chemical composition. H{sub 2} generation under visible light irradiation (lambda>420 nm) was successfully obtained with the tuning of band structures of Na{sub 1-x}La{sub x}Ta{sub 1-x}Cr{sub x}O{sub 3}. The highest performance for H{sub 2} generation (4.5 mumol/h) was observed at x=0.4 with apparent quantum yield of 0.5%. The visible light harvesting as well as the photocatalysis was further discussed based on the electronic structures thereof.

36 MATERIALS SCIENCE↗

Electric-field tuning of the metal-insulator transition in ultrathin films of LaNiO{sub 3}

Epitaxial ultrathin films of the metallic perovskite LaNiO{sub 3} were grown on (001) SrTiO{sub 3} substrates using off-axis rf magnetron sputtering. The film structure was characterized and their electrical properties investigated. Films thinner than 8 unit cells display a metal-insulator transition at a thickness dependent characteristic temperature. Hall measurements revealed p-type conduction, which was confirmed by electric field-effect experiments. Large changes in the transport properties and the metal-insulator transition temperature were observed for the thinnest LaNiO{sub 3} films as the carrier density was electrostatically tuned.

36 MATERIALS SCIENCE↗

Experimental validation of a diagnostic technique for tuning the fourth shock timing on National Ignition Facility

Capsule implosions on the National Ignition Facility (NIF) [Lindl et al., Phys. Plasmas 11, 339 (2004)] will be driven with a carefully tailored sequence of four shock waves that must be timed to very high precision in order to keep the fuel on a low adiabat. The Hohlraum conditions present during the first three shocks allow for a very accurate and direct diagnosis of the strength and timing of each individual shock by velocity interferometry. Experimental validation of this diagnostic technique on the OMEGA Laser Facility [Boehly et al., Opt. Commun. 133, 495 (1997)] has been reported in [Boehly et al., Phys. Plasmas 16, 056302 (2009)]. The Hohlraum environment present during the launch and propagation of the final shock, by contrast, is much more severe and will not permit diagnosis by the same technique. A new, closely related technique has been proposed for measuring and tuning the strength and timing of the fourth shock. Experiments to test this technique under NIF-relevant conditions have also been performed on OMEGA. The result of these experiments and a comparison to numerical simulations is presented, validating this concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Tuning Effect in the Recent Data on Nuclear Binding Energies

We consider relations in parameters of the Standard Model including the scaling factors similar to the QED radiative correction ({alpha}/2{pi}) for the electron magnetic moment. Together with QCD gluon quark-dressing effects it allows the intercomparison of mass values of leptons, nucleons, quarks and fundamental bosons with the parameters of tuning effects in nuclear data. Long-range correlation in nucleon masses observed as the shift relative to integers of the electron mass m{sub e} and the possible role of unconfirmed mass-grouping effects at colliders are considered.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reversible tuning of photonic crystal cavities using photochromic thin films

We demonstrate reversible tuning of a photonic crystal cavity resonance using a thin photochromic film composed of spiropyran and polymethylmethacrylate that serves as a photosensitive cladding layer. Exposure of spiropyran to ultraviolet light results in smooth redshift of the cavity resonance that can be reversed by exposure to visible wavelength light. We achieve a reversible resonance shift of up to 2.7 nm, which can be performed locally on individual cavities. The resonance shift over multiple successive UV and visible light exposures is studied to determine the repeatability of the photochromic film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Case-based Reasoning for Automotive Engine Performance Tune-up

The automotive engine performance tune-up is greatly affected by the calibration of its electronic control unit (ECU). The ECU calibration is traditionally done by trial-and-error method. This traditional method consumes a large amount of time and money because of a large number of dynamometer tests. To resolve this problem, case based reasoning (CBR) is employed, so that an existing and effective ECU setup can be adapted to fit another similar class of engines. The adaptation procedure is done through a more sophisticated step called case-based adaptation (CBA)[1, 2]. CBA is an effective knowledge management tool, which can interactively learn the expert adaptation knowledge. The paper briefly reviews the methodologies of CBR and CBA. Then the application to ECU calibration is described via a case study. With CBR and CBA, the efficiency of calibrating an ECU can be enhanced. A prototype system has also been developed to verify the usefulness of CBR in ECU calibration.

99 GENERAL AND MISCELLANEOUS↗

Adsorption-driven tuning of the electrical resistance of nanoporous gold

The electrical resistance of nanoporous gold prepared by dealloying is tuned by charging the surfaces of the porous structure in an electrolyte. Reversible variations in the resistance up to approximately 4% and 43% occur due to charging in the regimes of double layer charging and specific adsorption, respectively. Charging-induced variations in the electron density or of the volume cannot account for the resistance variation, indicating that this variation is primarily caused by charge-induced modifications of the charge carrier scattering at the solid-electrolyte interface. The relative resistance variation in nanoporous Au with surface charging is found to be much higher than reported for porous nanocrystalline Pt. This is due to the lesser resistance contribution from internal grain boundaries. The resistance variation in nanoporous Au is also higher than that found in thin films owing to the stronger surface scattering in the ligament structure compared to plan surfaces. We argue that the strong resistance variation in up to 43% in the regime of specific adsorption is due to the reversible formation of a chemisorbed surface layer acting as scattering centers for the charge carriers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning perpendicular magnetic anisotropy in (Ga,Mn)(As,P) by thermal annealing

We have investigated the effects of postgrowth low temperature annealing on the magnetic, electrical, and structural properties of (Ga{sub 0.94}Mn{sub 0.06})(As{sub 0.9}P{sub 0.1}) layers grown by molecular beam epitaxy. By controlling the annealing time, we are able to tune the magnetic anisotropy between an easy axis in the plane for the as-grown samples, to an easy axis perpendicular to the plane for fully annealed samples. The increase in the carrier density, as a result of annealing, is found to be the primary reason for the sign reversal of the magnetic anisotropy, in qualitative agreement with theoretical predictions.

36 MATERIALS SCIENCE↗

Pre-Stressed Viscoelastic Composites: Effective Incremental Moduli and Band-Gap Tuning

We study viscoelastic wave propagation along pre-stressed nonlinear elastic composite bars. In the pre-stressed state we derive explicit forms for the effective incremental storage and loss moduli with dependence on the pre-stress. We also derive a dispersion relation for the effective wavenumber in the case of arbitrary frequency, hence permitting a study of viscoelastic band-gap tuning via pre-stress.

36 MATERIALS SCIENCE↗

Tuning plasmonic interaction between gold nanorings and a gold film for surface enhanced Raman scattering

We investigate the plasmonic properties of gold nanorings in close proximity to a gold film. The rings have been fabricated using nanosphere lithography and are optimized to boost their near-infrared surface enhanced Raman scattering (SERS) effects. A SERS enhancement factor as large as 1.4x10{sup 7} has been achieved by tuning the separation between the gold nanorings and the gold film. In addition, we have numerically and experimentally demonstrated an enhanced tunability of the plasmon resonance wavelength and a narrowing of the plasmon linewidth for increasing ring-film interaction.

36 MATERIALS SCIENCE↗

Tuning the hydrophobicity of mica surfaces by hyperthermal Ar ion irradiation

The hydrophobicity of surfaces has a strong influence on their interactions with biomolecules such as proteins. Therefore, for in vitro studies of bio-surface interactions model surfaces with tailored hydrophobicity are of utmost importance. Here, we present a method for tuning the hydrophobicity of atomically flat mica surfaces by hyperthermal Ar ion irradiation. Due to the sub-100 eV energies, only negligible roughening of the surface is observed at low ion fluences and also the chemical composition of the mica crystal remains almost undisturbed. However, the ion irradiation induces the preferential removal of the outermost layer of K{sup +} ions from the surface, leading to the exposure of the underlying aluminosilicate sheets which feature a large number of centers for C adsorption. The irradiated surface thus exhibits an enhanced chemical reactivity toward hydrocarbons, resulting in the adsorption of a thin hydrocarbon film from the environment. Aging these surfaces under ambient conditions leads to a continuous increase of their contact angle until a fully hydrophobic surface with a contact angle >80 deg. is obtained after a period of about 3 months. This method thus enables the fabrication of ultrasmooth biological model surfaces with precisely tailored hydrophobicity.

36 MATERIALS SCIENCE↗

Tuning the electronic coupling in a low-bandgap donor-acceptor copolymer via the placement of side-chains

We present a spectroscopic and theoretical investigation of the effect of the presence and position of hexyl side-chains in the novel low-bandgap alternating donor-acceptor copolymer poly[bis-N,N-(4-octylphenyl)-bis-N,N-phenyl-1, 4-phenylenediamine-alt-5,5'-4',7',-di-2-thienyl-2',1',3'-benzothiadiazole] (T8TBT). We use electronic absorption and Raman spectroscopic measurements supported by calculations of chain conformation, electronic transitions, and Raman modes. Using these tools, we find that sterically demanding side-chain configurations induce twisting in the electronic acceptor unit and reduce the electronic interaction with the donor. This leads to a blue-shifted and weakened (partial) charge-transfer absorption band together with a higher photoluminescence efficiency. On the other hand, sterically relaxed side-chain configurations promote coupling between donor and acceptor units and exhibit enhanced absorption at the expense of luminescence efficiency. The possibility of tuning the donor-acceptor character of conjugated polymers by varying the placement of side-chains has very important ramifications for light emitting diode, Laser, display, and photovoltaic device optimization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning of the surface plasmon resonance in TiO{sub 2}/Au thin films grown by magnetron sputtering: The effect of thermal annealing

Nanocomposites consisting of a dielectric matrix, such as TiO{sub 2}, with embedded noble metal nanoparticles (NPs) possess specific optical properties due to the surface plasmon resonance (SPR) effect, interesting for several applications. The aim of this work is to demonstrate that these properties are sensitive to the nanostructure of magnetron-sputtered TiO{sub 2}/Au thin films, which can be tuned by annealing. We study the role of the shape and size distribution of the NPs, as well as the influence of the crystallinity and phase composition of the host matrix on the optical response of the films. All these characteristics can be modified by vacuum annealing treatments of the deposited films. A theoretical interpretation and modeling of the experimental results obtained is presented. The model involves a modified Maxwell-Garnett approach for the effective dielectric function of the composite (describing the SPR effect) and the transfer matrix formalism for multilayer optics. Input data are based on the experimental information obtained from the detailed structural characterization of the films. It is shown that the annealing treatments can be used for controlling the optical properties of the composite films, making them attractive for decorative coatings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron beam tuning of carrier concentrations in oxide nanowires

In spite of the attractive electrical properties of metal oxide nanowires, it is difficult to tune their surface states, notably the ionic adsorbents and oxygen vacancies, both of which can cause instability, degradation, and the irreproducibility or unrepeatable changes of the electrical characteristics. In order to control the surface states of the nanowires, electron beams were locally irradiated onto the channels of metal oxide nanowire field effect transistors. This high energy electron beam irradiation changed the electrical properties of the individual metal oxide nanowires, due to the removal of the negative adsorbents (O{sub 2}{sup -}, O{sup -}). The detachment of the ionic adsorbents changes the charge states of the nanowires, resulting in the enhancement of the electrical conductance in n-type nanowires (ZnO, SnO{sub 2}) and the degradation of the conductance in p-type nanowires (CuO). By investigating the changes in the electrical properties of nanowire devices in air or vacuum, with or without exposure to electron beams, the roles of the physisorbed water molecules or chemisorbed oxygen molecules can be independently understood. Unlike the electron beam irradiation, the vacuum enhanced the conductance of both n-type (ZnO, SnO{sub 2}) and p-type (CuO) nanowires, due to the release of charges caused by the detachment of the polarized water molecules that were screening them from the surface of the nanowires, irrespective of the major carrier type. The electron beam irradiation technique has the potential to locally modulate the charge carriers in electronic nanowire devices, and the changes could be maintained with proper passivation for the long-term preservation of the device characteristics.

36 MATERIALS SCIENCE↗

Experimental demonstration of early time, hohlraum radiation symmetry tuning for indirect drive ignition experiments

Early time radiation symmetry at the capsule for indirect drive ignition on the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Nucl. Fusion 44, 228 (2004)] will be inferred from the instantaneous soft x-ray re-emission pattern of a high-Z sphere replacing the ignition capsule. This technique was tested on the OMEGA laser facility [J. M. Soures, R. L. McCrory, T. Boehly et al., Laser Part. Beams 11, 317 (1991)] in near full ignition scale vacuum hohlraums using an equivalent experimental setup to the one planned for NIF. Two laser cones entering each laser entrance hole heat the hohlraums to radiation temperatures of 100 eV, mimicking the NIF ignition pulse foot drive. The experiments have demonstrated accuracies of {+-}1.5% ({+-}2%) in inferred P{sub 2}/P{sub 0} (P{sub 4}/P{sub 0}) Legendre mode incident flux asymmetry and consistency between 900 eV and 1200 eV re-emission patterns. We have also demonstrated the expected tuning capability of P{sub 2}/P{sub 0}, from positive (pole hot) to negative (waist hot), decreasing linearly with the inner/outer beams power fraction. P{sub 4}/P{sub 0} on the other hand shows very little variation with power fraction. We developed a simple analytical viewfactor model that is in good agreement with both measured P{sub 2}/P{sub 0} and P{sub 4}/P{sub 0} and their dependence on inner beam power fraction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Acceleration of 500 keV Negative Ion Beams By Tuning Vacuum Insulation Distance On JT-60 Negative Ion Source

Acceleration of a 500 keV beam up to 2.8 A has been achieved on a JT-60U negative ion source with a three-stage accelerator by overcoming low voltage holding which is one of the critical issues for realization of the JT-60SA ion source. In order to improve the voltage holding, preliminary voltage holding tests with small-size grids with uniform and locally intense electric fields were carried out, and suggested that the voltage holding was degraded by both the size and local electric field effects. Therefore, the local electric field was reduced by tuning gap lengths between the large size grids and grid support structures of the accelerator. Moreover, a beam radiation shield which limited extension of the minimum gap length was also optimized so as to reduce the local electric field while maintaining the shielding effect. These modifications were based on the experiment results, and significantly increased the voltage holding from <150 kV/stage for the original configuration to 200 kV/stage. These techniques for improvement of voltage holding should also be applicable to other large ion sources accelerators such as those for ITER.

43 PARTICLE ACCELERATORS↗