Search NASA⌕ Search

SEARCH · Search NASA

Results for “Volatile analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Collaborative simulations and experiments for a novel yield model of coal devolatilization in oxy-coal combustion conditions

Oxy-coal combustion is an emerging low-cost “clean coal” technology for emissions reduction and Carbon Capture and Sequestration (CCS). The use of Computational Fluid Dynamics (CFD) tools is crucial for the development of cost-effective oxy-fuel technologies and the minimization of environmental concerns at industrial scale. The coupling of detailed chemistry models and CFD simulations is still challenging, especially for large-scale plants, because of the high computational efforts required. The development of scale-bridging models is therefore necessary, to find a good compromise between computational efforts and the physical-chemical modeling precision. This paper presents a procedure for scale-bridging modeling of coal devolatilization, in the presence of experimental error, that puts emphasis on the thermodynamic aspect of devolatilization, namely the final volatile yield of coal, rather than kinetics. The procedure consists of an engineering approach based on dataset consistency and Bayesian methodology including Gaussian-Process Regression (GPR). Experimental data from devolatilization tests carried out in an oxy-coal entrained flow reactor were considered and CFD simulations of the reactor were performed. Jointly evaluating experiments and simulations, a novel yield model was validated against the data via consistency analysis. In parallel, a Gaussian-Process Regression was performed, to improve the understanding of the uncertainty associated to the devolatilization, based on the experimental measurements. Potential model forms that could predict yield during devolatilization were obtained. The set of model forms obtained via GPR includes the yield model that was proven to be consistent with the data. Finally, the overall procedure has resulted in a novel yield model for coal devolatilization and in a valuable evaluation of uncertainty in the data, in the model form, and in the model parameters.

01 COAL, LIGNITE, AND PEAT↗

Site-Specific Preparation of Intact Solid–Liquid Interfaces by Label-Free In Situ Localization and Cryo-Focused Ion Beam Lift-Out

Abstract Scanning transmission electron microscopy (STEM) allows atomic scale characterization of solid–solid interfaces, but has seen limited applications to solid–liquid interfaces due to the volatility of liquids in the microscope vacuum. Although cryo-electron microscopy is routinely used to characterize hydrated samples stabilized by rapid freezing, sample thinning is required to access the internal interfaces of thicker specimens. Here, we adapt cryo-focused ion beam (FIB) “lift-out,” a technique recently developed for biological specimens, to prepare intact internal solid–liquid interfaces for high-resolution structural and chemical analysis by cryo-STEM. To guide the milling process we introduce a label-free in situ method of localizing subsurface structures in suitable materials by energy dispersive X-ray spectroscopy (EDX). Monte Carlo simulations are performed to evaluate the depth-probing capability of the technique, and show good qualitative agreement with experiment. We also detail procedures to produce homogeneously thin lamellae, which enable nanoscale structural, elemental, and chemical analysis of intact solid–liquid interfaces by analytical cryo-STEM. This work demonstrates the potential of cryo-FIB lift-out and cryo-STEM for understanding physical and chemical processes at solid–liquid interfaces.

36 MATERIALS SCIENCE↗

Milestone Report - Data Requirements and Test System Needs for Development of an Integrated Off-Gas Treatment System

In fiscal year 2016 an Engineering Evaluation of an integrated off-gas system was conducted. This study resulted in a report entitled Engineering Evaluation of an Integrated Off-Gas Treatment System for Used Nuclear Fuel Reprocessing Facilities (Jubin et al. 2016a), from here referred to as the “Engineering Evaluation.” This study focused on the capture and retention of the volatile radionuclides ( 3 H, 14 C, 85 Kr, and 129 I), selected semi-volatile radionuclides, specifically 106 Ru, and chemical species like NO and NO 2 generated during the dissolution of the used nuclear fuel. The study examined the design of the combined head-end off-gas streams and the vessel off-gas stream. The study drew upon the available literature to conduct the equipment sizing and sorbent usage. A number of assumptions were required to complete this analysis and major gaps in the available data were identified that, if resolved, could increase the fidelity of the engineering design.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Covariance Manipulation for Conjunction Assessment

The manipulation of space object covariances to try to provide additional or improved information to conjunction risk assessment is not an uncommon practice. Types of manipulation include fabricating a covariance when it is missing or unreliable to force the probability of collision (Pc) to a maximum value ('PcMax'), scaling a covariance to try to improve its realism or see the effect of covariance volatility on the calculated Pc, and constructing the equivalent of an epoch covariance at a convenient future point in the event ('covariance forecasting'). In bringing these methods to bear for Conjunction Assessment (CA) operations, however, some do not remain fully consistent with best practices for conducting risk management, some seem to be of relatively low utility, and some require additional information before they can contribute fully to risk analysis. This study describes some basic principles of modern risk management (following the Kaplan construct) and then examines the PcMax and covariance forecasting paradigms for alignment with these principles; it then further examines the expected utility of these methods in the modern CA framework. Both paradigms are found to be not without utility, but only in situations that are somewhat carefully circumscribed.

Conjunction↗

Device for collecting chemical compounds and related methods

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from the fixed surfaces so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

47 OTHER INSTRUMENTATION↗

Devices for collecting chemical compounds

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

47 OTHER INSTRUMENTATION↗

Analysis of Molecular Contamination on Genesis Collectors Through Spectroscopic Ellipsometry

Before the spacecraft returned to Earth in September, the Genesis mission had a preliminary assessment plan in place for the purpose of providing information on the condition and availability of collector materials to the science community as a basis for allocation requests. One important component of that plan was the evaluation of collector surfaces for molecular contamination. Sources of molecular contamination might be the on-orbit outgassing of spacecraft and science canister components, the condensation of thruster by-products during spacecraft maneuvers, or the condensation of volatile species associated with reentry. Although the non-nominal return of the Genesis spacecraft introduced particulate contamination to the collectors, such as dust and heatshield carbon-carbon, it is unlikely to have caused any molecular deposition. The contingency team's quick action in returning the damaged payload the UTTR cleanroom by 6 PM the evening of recovery help to ensure that exposure to weather conditions and the environment were kept to a minimum.

McNamara, K. M.↗

Improving Volatile Fatty Acid Productivity of Anaerobic Digestion

Typical anaerobic digestion (AD) focusses on complete conversion of waste to biogas (primarily carbon dioxide and methane). However, the intermediate metabolites of the AD process, which includes short- and long-chain volatile fatty acids (VFAs), that could serve as the precursors for useful industrial applications are typically ignored. The goal of this project is to eliminate production of biogas while enhancing the production of the intermediate VFAs. Using a mixed microbial consortium (from rumen sources and waste-water sludge), we have determined the optimal carbon loading (chemical oxygen demand, "COD") and optimal pH, that results in high VFA concentrations from food waste. The best VFA yields were obtained using 15 g COD/L and a pH of 9.0 for this substrate. pH 9 produced over 200% higher VFA titers than the controlled conditions (i.e., ph 7.0) after 35 d of digestion, in comparison to pH 5 that showed - 88% higher titers than the control digestion. As expected, the cumulative biogas production was highest in the pH 7.0 condition, in comparison to pH 5.0 or pH 9.0. We further observed that removal of VFAs using solid-liquid separation technique reduce the inhibitory effects of VFAs, thereby leading to overall improvement in conversion efficiency. 16s rRNA analysis is being carried out to explain and identify the biocatalysts that enable VFA production in these AD cultures. Additional efforts to improve VFA yields via increasing the total solid content, temperature optimizations, VFA removal via electrodialysis, and improving hydrolysis via microaeration will be presented.

anaerobic digestion↗

A geochemical approach to constraining the formation of glassy fallout debris from nuclear tests

Reprocessed earth material is a glassy nuclear fallout debris from near-surface nuclear tests. A geochemical approach to analysis of glassy fallout is uniquely suited to determine the means of reprocessing and shed light on the mechanisms of fallout formation. An improved understanding of fallout formation is of interest both for its potential to guide post-detonation nuclear forensic investigations and in the context of possible affinities between glassy debris and other glasses generated by high-energy natural events, such as meteorite impacts and lightning strikes. Our study presents a large major-element compositional dataset for glasses within aerodynamic fallout from the Trinity nuclear test (“trinitite”) and a geochemically based analysis of the glass compositional trends. Silica-rich and alkali-rich trinitite glasses show compositions and textures consistent with formation through melting of individual mineral grains—quartz and alkali feldspar, respectively—from the test-site sediment. Furthermore, the volumetrically dominant glass phase—called the CaMgFe glass—shows extreme major-element compositional variability. Compositional trends in the CaMgFe glass are most consistent with formation through volatility-controlled condensation from compositionally heterogeneous plasma. Radioactivity occurs only in CaMgFe glass, indicating that co-condensation of evaporated bulk ground material and trace device material was the main mechanism of radioisotope incorporation into trinitite. CaMgFe trinitite glasses overlap compositionally with basalts, rhyolites, fulgurites, tektites, and microtektites but display greater compositional diversity than all of these naturally formed glasses. Indeed, the most refractory CaMgFe glasses compositionally resemble early solar system condensates—specifically, CAIs.

58 GEOSCIENCES↗

Cannabis monoterpene synthases: evaluating structure–function relationships

Terpene synthases catalyze the first committed step in the biosynthesis of terpenes, a structurally diverse class of natural products that also encompasses volatiles derived from precursors in the C10 to C15 range (termed monoterpenes and sesquiterpenes, respectively). In the review section of this article, we are providing information about all functionally characterized monoterpene synthases (MTSs) and sesquiterpene synthases (STSs) of Cannabis sativa L. We are also exploring the locations of MTSs and STSs in the chromosome-level assembly of the reference chemovar CBDRx. A follow-up computational structure–function analysis focuses on MTSs, as there is already a rich literature available on the topic. More specifically, by employing sequence comparisons and homology structural modeling, we infer which amino acid residues are likely to constrain the available space in the active site of cannabis MTSs. The emphasis of these studies was to investigate why some MTSs accept only a C10 diphosphate as substrate, while mixed MTS/STS enzymes also accommodate a C15 diphosphate. Here, by combining a literature review and computational analyses in a hybrid format, we are laying the foundation for future studies to better understand the determinants of substrate and product specificity in these fascinating enzymes.

59 BASIC BIOLOGICAL SCIENCES↗

Microstructure Experiments-Enabled MARMOT Simulations of SiC/SiC-based Accident Tolerant Nuclear Fuel System

We have undertaken an experimental-computational project that addresses a few key technology gaps associated with the use of SiC/SiC composites for light water reactor fuel cladding. Two principal endeavors in this project are to assess the irradiation-induced microstructural changes and swelling in SiC/SiC composites, and to characterize and model the porous oxide surface layer (when exposed to steam) along SiC recession that is detrimental to the clad integrity under accident conditions. The project tasks are: (i) ion irradiation and characterization (University of Tennessee, Knoxville), (ii) mechanical tests and analysis (University of South Carolina), (iii) steam exposure tests (Oak Ridge National Laboratory), (iv) electron microscopy and spectroscopic characterization (NC State University), (v) x-ray microscopy and reconstruction (University of South Carolina and NC State University), (vi) phase field modeling and simulations (NC State University and Idaho National Laboratory). The effects of 10 MeV Au ion irradiation at 350°C on the microstructure evolution in SiC/SiC composites are investigated at doses up to 400 displacements per atom (dpa) at the University of Tennessee, Knoxville. Atomic force microscopy and optical profilometry reveal irradiation induced axial and radial shrinkage of the fibers for doses greater than 10 dpa. Based on detailed electron microscopy characterization, the primary cause of the fiber shrinkage is attributed to irradiation-induced loss of carbon packets. Additionally, the multilayer PyC interface is observed to portray high resistance to irradiation damage. The mechanical response and failure mechanisms of un-irradiated samples is also assessed through loading tests and X-ray imaging at the University of South Carolina. Steam exposure tests are performed at the Oak Ridge National Laboratory in a facility that represents a reactor pressure vessel under a loss-of-coolant-accident scenario. The samples that are analyzed methodically in this report are tested for 32/31 hours at 1200°C with a velocity of 0.25 cm/s for the pressures: 0.1 MPa, 0.45 MPa, 0.92 MPa and 1.38 MPa. Scanning/transmission electron microscopy analysis conducted at the NC State University (NCSU) shows that the oxide layer thickness increases with the steam pressure. While the oxide layer is crystalline (α- cristobalite) for the pressures 0.45 MPa, 0.92 MPa and 1.38 MPa, the layer is amorphous at 0.1 MPa. Results from Raman spectroscopy have also confirmed the formation of α-cristobalite phase of SiO₂. The abrupt increase in the integrated Raman intensity ratio between steam pressures 0.1 and 0.45 MPa suggests the onset of accelerated crystallization. Non-destructive three dimensional X-ray microscopy/tomography (XCT) and computational image processing techniques are employed by the University of South Carolina to probe the porous oxidation features on SiC samples at varying pressures. Interestingly, most pores are observed to be located away from the surface as well as the oxide-SiC interface. The average oxide layer thickness assessed from the XCT analysis is seen to be in excellent agreement with the values determined through scanning electron microscopy analysis for the highest pressures where the oxide layer is relatively more uniform. A phase-field model developed by the NC State University and Idaho National Laboratory for simulating oxidation of SiC by steam captures the paralinear kinetics of SiC oxidation with a high degree of fidelity. Results from quasi-one-dimensional and two dimensional simulations show that the pores with oxidizing species lead to a higher volatilization rate. These simulations indicate that the enhanced apparent volatilization rates at higher pressures observed in experiments can be rationalized by the increased volatilization from the pores. The project team has also successfully developed the capability to import images from experiments for realistic evolution of the oxidizing microstructure.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Detection of boron, cobalt, and other weak interstellar lines toward Zeta Ophiuchi

Numerous weak lines from interstellar atomic species toward Zeta Ophiuchi were observed with the Goddard High-Resolution Spectrograph. Of particular note are the first interstellar detection of cobalt and the detection of boron in this sight line. These measurements provide estimates for the amount of depletion for the two elements. Boron, a volatile, and cobalt, a refractory element, display the depletion pattern found by Savage et al. (1992). The abundance of phosphorus in the H II region associated with the star was obtained from a detection of P III. Additional weak lines from S I, C I, Ni II, and Cu II were detected for the first time; these lines provide the basis for refinements in oscillator strength and column density. Analysis of the neutral sulfur data indicates that the atomic gas is more widely distributed than the molecular material in the main component.

Federman, S. R.↗

Location, location: deciphering the significance of in-situ hydrogen analyses of Martian meteorite phases

Understanding how inner planets acquired their volatiles such as hydrogen (H) is fundamental to constrain models of solar system formation [e.g. 1]. One avenue of estimating the H content and isotopic characteristics of differentiated planets is to analyze the samples we have from them as meteorites. Ideally, the H content and isotopic characteristic of the mantle sources of these igneous rocks should give insight into the volatile origin of each planetary body. The mantle H signatures can be estimated from that of the parent melt, which in turn may be derived from that of the first crystallized phases. However, we will illustrate the processes that can modify the H content and D/H ratios of pyroxene, olivine and feldspar in selected Martian meteorites relative to those of their mantle sources, with two key protocols for SIMS analysis. The first key is to put each analysis in textural context ("location, location"). In particular, of prime importance is whether an analysis is done at the center or the edge of a mineral grain, close or far from a shock disturbed area, and in a mineral crystallized at the beginning or late in the differentiation sequence. Accompanying the H analyses done by SIMS with major and trace element data at the same analysis locations allows to constrain the history of crystallization, cooling, alteration and shock of the meteorite. For example, volcanic degassing can be evidenced by decreasing water contents and increasing D/H ratios from core to edge of nakhlite pyroxenes [2]. Traverses of H analyses in pyroxene and maskelynite in shergottite LAR 06319 provide examples of H contents and D/H ratios modified during degassing following shock [3]. The second key is to assess if the area analyzed by SIMS has shock generated damage of the mineral structure, as will be shown in pyroxene and olivine from shergottite RBT 04262. Olivine in shergottites have too high water contents to be explained with an igneous origin and their D/H ratios are more consistent with terrestrial alteration, as observed before [4]. A review of all these processes shows how careful one has to be prior to using H measurements in meteorites to infer the origin and amount of water in differentiated planetary interiors.

A.H. Peslier↗

Spatially Explicit Modeling of Criteria Air Pollutants from Agricultural and Forestry Feedstock Production

The Feedstock Production Emissions to Air Model (FPEAM) is a spatially explicit supply chain model that quantifies criteria air pollutants and precursors generated by biomass production, harvest and transportation to biorefineries. FPEAM was most recently used for the 2016 Billion Ton Study (BTS) published by the U.S. Department of Energy Bioenergy Technologies Office. This presentation describes several use cases for the model, and provides an overview of recent restructuring that increases FPEAM's usability and functionality. FPEAM currently estimates emissions of volatile organic compounds, particulate matter, nitrogen oxides, sulfur oxides, and carbon monoxide from on-farm equipment operation, on-farm fugitive dust, on-farm chemical (fertilizer, herbicide and insecticide) application, and biomass transportation. These calculations are implemented within FPEAM as modules, which independently perform calculations for each emissions category. This structure allows users to include or exclude emissions categories according to the goal and scope of their analysis. Each module's input data defines the activities taking place with information including fuel combusted, chemicals applied, and equipment used. Users can replace or augment the default input data to quantify additional pollutant types, emissions categories, farming practices and biomass types. Emissions from biomass transportation and on-farm equipment operation are by default calculated by the U.S. Environmental Protection Agency's Motor Vehicle Emission Simulator (MOVES) and NONROAD model, respectively. These models - which are computationally intensive but provide detailed results - can optionally be replaced with user-provided emissions factors for fuel combustion and vehicle operation. This approach reduces FPEAM's runtime and allows users to run sensitivity analyses around biomass production and transportation scenarios. Other enhancements currently under development are the use of farm-to-biorefinery route information to increase the spatial resolution of transportation emissions, and a module to connect FPEAM and the Intervention Model for Air Pollution (InMAP), which will enable the quantification of human health impacts.

09 BIOMASS FUELS↗

Pressurized fast-pyrolysis characteristics of typical Chinese coals with different ranks

The pressurized fast pyrolysis of three typical Chinese coals with different coal ranks (Huolinhe lignite, Shenmu bituminous coal, and Jincheng anthracite) was conducted on a self-made pressurized fixed-bed reactor. The physicochemical characteristics of the chars were studied via scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FT-IR). In addition, thermogravimetric analysis (TGA) at ambient pressure has been used to study the influence of the residence time, the pyrolysis temperature, and pressure on the gasification reactivity of residual chars. The results show that the change in char yield and reactivity with pressure, at a residence time of 1 min, is different from that at longer residence time. This is related to the changing impacts of the rapid primary release of volatiles and the slower secondary cracking reactions of the evolved tars and the graphitization of the char structure. Furthermore, as the coal rank, pyrolysis pressure, temperature, and residence time increase, the surface structure of the char becomes much denser, the degree of graphitization is enhanced, and the number of the functional groups is reduced, which lead to the decrease in the gasification reactivity of the coal char. 23 refs., 1 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Aircraft Measurements from a U.S. Western Wildfire Demonstrating Day and Night Differences in the Chemical Composition and Optical Properties of Biomass Burning Aerosols and Their Atmospheric Evolution

The composition and transformations of biomass burning aerosols (BBA) have been measured onboard the NOAA Twin Otter research aircraft during the Fire Influence on Regional to Global Environments and Air Quality field study. Here, we analyze real-time aerosol mass spectrometry measurements across three flights during the afternoon, late afternoon, and night of August 28, 2019, for one midsized wildfire. Analysis of several metrics showed that the aerosol composition and optical properties varied depending on the burning conditions at the fire zone and the time of day the BBA was emitted, with substantial variations in the available sunlight. The total aerosol mass loadings were dominated by organic components with a much smaller contribution from inorganic species. A gradual buildup of organic material was observed during the afternoon as the plume aged, indicating the condensation of photochemically formed low-volatility oxidized organic compounds. Highly hygroscopic ammonium nitrate was the main inorganic component, suggesting potential water content in BBA particles and the likelihood of their aqueous-phase reactivity. Depletions of particle-phase NO 3 – and Cl – relative to carbon monoxide were observed in the late afternoon and nighttime plumes, respectively, aligning with known gas-particle partitioning thermodynamics and the heterogeneous chemistry of dissolved nitrate and chloride. The wavelength-dependent light absorption by aerosol species was higher for the plume sampled at night and showed no significant changes with plume age, despite observed trends in composition and mass downwind. These differences in particle composition and optical properties demonstrate that the processes involved in BBA aging are not uniform for the same wildfire over the course of the day and depend highly on when the BBA was emitted, as well as the burning phase at the emissions source.

54 ENVIRONMENTAL SCIENCES↗

Hydrophobins in the Life Cycle of the Ectomycorrhizal Basidiomycete Tricholoma vaccinum

Hydrophobins—secreted small cysteine-rich, amphipathic proteins—foster interactions of fungal hyphae with hydrophobic surfaces, and are involved in the formation of aerial hyphae. Phylogenetic analyses of Tricholoma vaccinum hydrophobins showed a grouping with hydrophobins of other ectomycorrhizal fungi, which might be a result of co-evolution. Further analyses indicate angiosperms as likely host trees for the last common ancestor of the genus Tricholoma. The nine hydrophobin genes in the T. vaccinum genome were investigated to infer their individual roles in different stages of the life cycle, host interaction, asexual and sexual development, and with respect to different stresses. In aerial mycelium, hyd8 was up-regulated. In silico analysis predicted three packing arrangements, i.e., ring-like, plus-like and sheet-like structure for Hyd8; the first two may assemble to rodlets of hydrophobin covering aerial hyphae, whereas the third is expected to be involved in forming a two-dimensional network of hydrophobins. Metal stress induced hydrophobin gene hyd5. In early steps of mycorrhization, induction of hyd4 and hyd5 by plant root exudates and root volatiles could be shown, followed by hyd5 up-regulation during formation of mantle, Hartig’ net, and rhizomorphs with concomitant repression of hyd8 and hyd9. During fruiting body formation, mainly hyd3, but also hyd8 were induced. Host preference between the compatible host Picea abies and the low compatibility host Pinus sylvestris could be linked to a stronger induction of hyd4 and hyd5 by the preferred host and a stronger repression of hyd8, whereas the repression of hyd9 was comparable between the two hosts.

59 BASIC BIOLOGICAL SCIENCES↗

Prospecting for Polar Volatiles: Results from the Resolve Field

Both the Moon and Mercury evidently host ice and other volatile compounds in cold traps at the planets poles. Determining the form, spatial distribution, and abundance of these volatiles at the lunar poles can help us understand how and when they were delivered and emplaced. This bears directly on the delivery of water and prebiotic compounds to the inner planets over the solar system s history, and also informs plans for utilizing the volatiles as resources for sustained human exploration as well as the commercial development of space. Temperature models and orbital data suggest near-surface volatile concentrations may exist at polar locations not strictly in permanent shadow. Remote operation of a robotic lunar rover mission for the 7-10 days of available sunlight would permit key questions to be answered. But such a short, quick-tempo mission has unique challenges and requires a new concept of operations. Both science and rover operations decisionmaking must be done in real time, requiring immediate situational awareness, data analysis, and decision support tools.

Elphic, Richard C.↗