Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalyst characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Carbon Defect Characterization of Nitrogen-Doped Reduced Graphene Oxide Electrocatalysts for the Two-Electron Oxygen Reduction Reaction

Numerous modified-carbon catalysts have been developed for the direct synthesis of hydrogen peroxide through electrochemical oxygen reduction. Yet, given the complex structure of most porous carbons and the poor oxygen reduction reaction (ORR) selectivity typically observed when they are used as catalysts, it is still unclear which carbon defects are responsible for the high two-electron ORR activity typically observed in these materials. Here, we study electrocatalytic peroxide formation activity of nitrogen-doped reduced graphene oxide ( N -rGO) materials to relate carbon defects to electrocatalytic activity. To achieve this, we selected two N -rGO electrodes that selectively produce peroxide at all potentials studied (0.70–0.10 V vs RHE) under alkaline conditions. Oxygen reduction studies, combined with material characterization, especially solid-state 13 carbon nuclear magnetic resonance coupled with magic angle spinning and cross-polarization, demonstrate that epoxy or ether groups in the N -rGO catalyst are likely associated with the active sites that form peroxide at the lowest overpotential in alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenation of Carbon Dioxide Catalyzed by Ruthenium Trimethylphosphine Complexes: A Mechanistic Investigation using High-Pressure NMR Spectroscopy

The previously reported complex, cis-(PMe3)4RuCl(OAc) (1) acts as a catalyst for CO2 hydrogenation into formic acid in the presence of a base and an alcohol co-catalyst. NMR spectroscopy has revealed that 1 exists in solution in equilibrium with fac-(PMe3)3RuCl(h2-OAc) (2), [(PMe3)4Ru(h2-OAc)]Cl (3a), and free PMe3. Complex 2 has been isolated and characterized by elemental analysis, NMR spectroscopy, and X-ray crystallography. 2 has been tested as a CO2 hydrogenation catalyst, however, it performed poorly under the conditions of catalysis used for 1. Complex 3a can be prepared by adding certain alcohols, such as MeOH, EtOH, or o-C6H5OH, to a solution of 1 in CDCl3. The chloride ion of 3a has been exchanged for the non-coordinating anions BPh4 or B(ArF )4 (B(ArF)4 = tetrakis(3,5-bis(trifluoromethyl)phenyl)borate) to produce [(PMe3)4Ru(h2-OAc)]BPh4 (3b) and [(PMe3)4Ru(h2-OAc)]B(ArF)4 (3c). Both of these complexes have been isolated and characterized by elemental analysis, NMR spectroscopy, and in the case of 3b, X-ray crystallography. Complexes 3b and 3c perform just as well as 1 for CO2 hydrogenation to formic acid in the presence of an alcohol co-catalyst; however, 3b,c perform equally well without the added alcohol. High-pressure NMR has been used to investigate the mechanism of CO2 hydrogenation via 3a,b in the presence of base. Two of the intermediates involved have been identified as cis-(PMe3)4RuH2 (5) and cis-(PMe3)4Ru(H)O2CH (6), and the role of the base includes not only trapping of the formic acid product, but also initiation of the catalysis by aiding the conversion of 3b,c to 5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Visible Light Photoreduction of CO{sub 2} Using CdSe/Pt/TiO{sub 2} Heterostructured Catalysts

A series of CdSe quantum dot (QD)-sensitized TiO{sub 2} heterostructures have been synthesized, characterized, and tested for the photocatalytic reduction of CO{sub 2} in the presence of H{sub 2}O. Our results show that these heterostructured materials are capable of catalyzing the photoreduction of CO{sub 2} using visible light illumination (λ > 420 nm) only. The effect of removing surfactant caps from the CdSe QDs by annealing and using a hydrazine chemical treatment have also been investigated. The photocatalytic reduction process is followed using infrared spectroscopy to probe the gas-phase reactants and gas chromatography to detect the products. Gas chromatographic analysis shows that the primary reaction product is CH{sub 4}, with CH{sub 3}OH, H{sub 2}, and CO observed as secondary products. Typical yields of the gas-phase products after visible light illumination (λ>420 nm) were 48 ppm g{sup -1} h{sup -1} of CH{sub 4}, 3.3 ppm g{sup -1} h{sup -1} of CH{sub 3}OH (vapor), and trace amounts of CO and H{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ruthenium supported on silicate and aluminosilicate mesoporous materials applied to selective sugar hydrogenation: Xylose to xylitol

A series of ruthenium-based catalysts supported on a set of silicate and aluminosilicate mesoporous molecular sieves was synthesized and tested in xylose hydrogenation. The materials were characterized in terms of morphology, textural properties, acidity, as well as ruthenium loading, dispersion, and oxidation state. In general, the aluminosilicates-based catalysts displayed a higher activity compared to their respective silicate supports, which can be ascribed to a higher Ru content and dispersion, enhanced by a higher acidity. The most active synthesized catalyst (Ru/Al-MCM-4) displayed an improved performance compared to a commercial Ru/C catalyst due to a better xylitol selectivity. Two modelling approaches were implemented to describe the kinetic rate. The first model was based on the hypothesis that xylose molecules and hydrogen are adsorbed in different active sites on the catalyst surface, while the second model supposes the formation of an intermediate on the catalyst surface that reacts to form xylitol. Both models gave a very good description of the experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient electrosynthesis of hydrogen peroxide in neutral media using boron and nitrogen doped carbon catalysts

The two-electron electrocatalytic oxygen reduction reaction (2e - ORR) is a promising, sustainable, and efficient route for on-site and small-scale production of hydrogen peroxide (H 2 O 2 ) compared to the conventional anthraquinone oxidation process. Although heteroatom doped carbon materials are widely studied for the 2e - ORR, few studies have been conducted on the synergistic relationship between multiple doping elements on H 2 O 2 performance. Moreover, there is a lack of efficient and stable catalysts for H 2 O 2 electrosynthesis in neutral media. In this work, a series of boron and nitrogen co-doped carbon (BNC) catalysts are synthesized and assessed for the 2e - ORR in neutral pH electrolyte. Through X-ray photoelectron and absorption spectroscopy analyses, we characterize B–N–C moieties and correlate them with H 2 O 2 production performance. In rotating ring disk electrode measurements, BNC catalysts pyrolyzed at 900 °C exhibit H 2 O 2 Faradaic efficiency of ~70% and demonstrate excellent long-term stability over 10 hours of continuous operation. In a three-electrode flow cell, this catalyst achieves ~78% H 2 O 2 Faradaic efficiency and 0.9 mmol cm -2 h -1 productivity at 0.20 V vs. RHE, surpassing most previously reported carbon-based catalysts in neutral media. This work contributes fundamental insights into the role of boron and nitrogen heteroatom dopants toward 2e - ORR and highlights the practical viability of these catalysts for real world applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Molecular structure and catalytic promotional effect of Mn on supported Na 2 WO 4 /SiO 2 catalysts for oxidative coupling of methane (OCM) reaction

The structure and promotional effect of Mn in supported Mn-Na 2 WO 4 /SiO 2 catalysts for the oxidative coupling of methane (OCM) reaction has been debated for a longtime in the literature. In the current investigation, with the aid of multiple in-situ characterization studies, we show that the freshly calcined supported 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst possesses crystalline Na 2 WO 4 , Mn 2 O 3 and SiO 2 (cristobalite phase) along with surface MnO x and Na-WO x sites at low temperature and oxidizing environments. Under the OCM reaction environment (T>800°C), the crystalline Na 2 WO 4 phase melts and Mn 2 O 3 phase reduces. In contrast, the surface MnO x and Na-WO x sites exhibit excellent thermal and chemical stability. Exposure of the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst to the OCM reaction environment redisperses the molten Na 2 WO 4 phase on the SiO 2 support to form new surface WO x sites. Interestingly, the stable MnO x species interacts with both molten Na 2 WO 4 phase and surface Na-WO x sites during OCM reaction. Controlled transient kinetic experiments in TAP and detailed steady state OCM fixed-bed reaction studies reveal the role and promotional effect of Mn in the 1.2Mn-5Na 2 WO 4 /SiO 2 catalyst. The W-oxides (both molten Na 2 WO 4 and surface Na-WO x sites) are the active sites for the catalytic OCM reaction and the MnO x species only function as promoters. The promotion of MnO x strongly depends on the gas phase O 2 partial pressure and the MnO x species act as mediators for oxygen exchange between the gas phase molecular O 2 and catalyst lattice oxygen. In conclusion, the temperature dependent MnO x promotion reveals that the MnO x species selectively promote the molten Na 2 WO 4 phase at lower reaction temperature and the surface Na-WO x sites at higher temperature.

36 MATERIALS SCIENCE↗

Two Co-zeolite imidazolate frameworks with different topologies for degradation of organic dyes via peroxymonosulfate activation

In this paper, two novel zeolitic imidazole framework (ZIF) materials, ZIF-9 and ZIF-12 were firstly introduced as catalysts to activate PMS for Rhodamine B degradation. ZIF-9 and ZIF-12 have the same composition in metal ions (Co{sup 2+}) and organic linker, but show different structural topologies (SOD and RHO, respectively) and particle size. The two ZIFs were successfully synthesized and characterized via SEM and PXRD. Both ZIF-9 and ZIF-12 as the PMS activation catalysts were evaluated and compared, and the underlying mechanism was proposed. The nanoscale nature enables ZIF-9 a closer contact with PMS, which leading to degradation rate ZIF-9 > ZIF-12 at the time of 5 min (54.8% and 27.7%, respectively). And the degradation of ZIF-12 gradually caught up with ZIF-9 when the reaction time was longer, which can be attributed to the RHO topology and larger cage size of ZIF-12. The efficient degradation of RhB indicates that ZIF-9 and ZIF-12 can be promising heterogeneous catalyst to activate PMS for the degradation of RhB. - Graphical abstract: Two novel zeolitic imidazole framework (ZIF) materials, ZIF-9 and ZIF-12 were firstly introduced as catalysts to activate PMS for Rhodamine B degradation. ZIF-9 and ZIF-12 have the same composition in metal ions (Co{sup 2+}) and organic linker, but show different structural topologies (SOD and RHO, respectively) and particle size. The efficient degradation of RhB indicates that ZIF-9 and ZIF-12 can be promising heterogeneous catalyst to activate PMS for the degradation of RhB. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photocatalytic degradation of organic pollutants coupled with simultaneous photocatalytic H 2 evolution over graphene quantum dots/Mn-N-TiO 2 /g-C 3 N 4 composite catalysts: Performance and mechanism

Graphene quantum dots/Mn-N-TiO 2 /g-C 3 N 4 (GQDs/TCN) composite photocatalysts have been designed, synthesized and characterized by XRD, SEM, TEM, Raman, BET, and XPS. The photodegradation of organic pollutants (p-nitrophenol, diethyl phthalate and ciprofloxacin, called as 4-NP, CIP and DEP, respectively) coupled with simultaneous photocatalytic production of hydrogen was successfully achieved using the GQDs/TCN catalysts. The 5%GQDs/TCN-0.4 sample shows the best photocatalytic hydrogen production and organic pollutant degradation rate under simulated solar irradiation in the simultaneous photocatalytic oxidation and reduction system. Furthermore, the photocatalytic H 2 evolution rates in the solution of 4-NP, CIP and DEP are all larger than that in pure water system over the 5%GQDs/TCN-0.4 catalyst. And the H 2 evolution rate in the solution of 4-NP is smaller than that in the solutions of CIP and DEP. Accordingly, the photodegradation rate of 4-NP is larger than that of CIP and DEP. The analyses of density functional theory and liquid chromatography mass spectrometry indicate that some photogenerated electrons were used in the photodegradation process of 4-NP but not in that of CIP and DEP. And it leads to the photocatalytic rate of H 2 evolution in the 4-NP solution smaller than that in the solution of CIP and DEP. For the first time, the present work illuminates the photocatalytic enhancement of the GQDs/TCN-0.4 catalyst and the mechanism of the effect of different organic pollutants on photocatalytic H 2 evolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

InGaAs heterostructure formation in catalyst-free GaAs nanopillars by selective-area metal-organic vapor phase epitaxy

We investigate axial GaAs/InGaAs/GaAs heterostructures embedded in GaAs nanopillars via catalyst-free selective-area metal-organic chemical vapor deposition. Structural characterization by transmission electron microscopy with energy dispersive x-ray spectroscopy (EDS) indicates formation of axial In{sub x}Ga{sub 1-x}As (x{approx}0.20) inserts with thicknesses from 36 to 220 nm with {+-}10% variation and graded Ga:In transitions controlled by In segregation. Using the heterointerfaces as markers, the vertical growth rate is determined to increase linearly during growth. Photoluminescence from 77 to 290 K and EDS suggest the presence of strain in the shortest inserts. This capability to control the formation of axial nanopillar heterostructures is crucial for optimized device integration.

36 MATERIALS SCIENCE↗

Propane Dehydrogenation Catalyzed by Supported Group IV (Ti, Zr, Hf) Organometallics on Silicon Nitride

Mesoporous silicon nitride (Si 3 N 4 ) enables access to chemisorbed group IV organometallics catalysts active for propane dehydrogenation (PDH) compared to the organometallic analogues on mesoporous silica under the same reaction conditions. The series of Si 3 N 4 -supported materials are active catalysts, (Zr > Hf > Ti k f = 290, 232, and 162 mol mol Metal -1 h -1 at 450 °C with 2% C 3 H 8 in Ar, respectively) with selectivity above 95%, demonstrating additional examples of Ti and Hf systems for PDH. However, the underlying mechanism of the improved performance relative to oxide supported homologues is not well-understood. Characterization of thermally treated samples (DRIFTS, XAS and SSNMR) and computational modeling of this catalyst series was utilized to differentiate between potential amido - (C-H activation along the M-N bond) and imido - (C-H activation along the M=N bond) mechanisms. Due to remaining mechanistic ambiguity, a Ga analogue was synthesized and evaluated for PDH activity as an indirect probe to experimentally differentiate pathways. An inversion of the oxide/nitride performance trend is observed for the Ga congener which does not form a Ga=N bond, most consistent with different mechanisms dictating the performance of the group IV/Si 3 N 4 catalysts vs Ga/Si 3 N 4 .

heterolytic cleavage↗

Synthesis and characterization of supported heteropolymolybdate nanoparticles between silicate layers of Bentonite with enhanced catalytic activity for epoxidation of alkenes

Highlights: {yields} The PVMo and nanocomposite catalyst (PVMo/Bentonite) as catalyst for epoxidation of alkenes. {yields} The composite catalyst showed higher catalytic activity than parent heteropolymolybdate (PVMo). {yields}The use of ultrasonic irradiation increased the conversions and reduced the reaction times. {yields} The H{sub 2}O{sub 2} is a green and eco-friendly oxidant in this catalytic system. -- Abstract: A new heterogeneous catalyst (PVMo/Bentonite) consisting of vanadium substituted heteropolymolybdate with Keggin-type structure Na{sub 5}[PV{sub 2}Mo{sub 10}O{sub 40}].14H{sub 2}O (PVMo) supported between silicate layers of bentonite has been synthesized by impregnation method and characterized using X-ray diffraction, Fourier-transformed infrared spectroscopy, scanning electron microscopy, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy and elemental analysis. X-ray diffraction and scanning electron microscopy analysis indicated that PVMo was finely dispersed into layers of bentonite as support. The PVMo/Bentonite used as an efficient heterogeneous catalyst for epoxidation of alkenes. Various cyclic and linear alkenes were oxidized into the corresponding epoxides in high yields and selectivity with 30% aqueous H{sub 2}O{sub 2}. The catalyst was reused several times, without observable loss of activity and selectivity. The obtained results showed that the catalytic activity of the PVMo/Bentonite was higher than that of pure heteropolyanion (PVMo).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and photocatalytic activity of TiO 2 nanowires in the degradation of p-aminobenzoic acid: A comparative study with a commercial catalyst

The photocatalytic degradation of p-aminobenzoic acid was studied using TiO 2 nanowires as the catalyst synthesized through a hydrothermal procedure. The as-synthesized TiO 2 nanowires were fully characterized by SEM, TEM, XRD and Raman with a very high surface area of 512 m 2 g -1 . In addition, the photocatalytic degradation of p-aminobenzoic acid was carried out under 180 min of constant radiation and the results were compared with P25 as commercial catalyst. Optimal experimental conditions were determined for TiO 2 nanowires with a catalyst dosage of 1.0 g L -1 under acidic conditions with a 20 μM p-aminobenzoic acid solution obtaining 95% of degradation. Under similar experimental conditions comparative studies were performed obtaining 98% of degradation when P25 is employed. Finally, in both systems, a pseudo first order reaction was found to provide the best correlations, with constant rates of 2.0 x 10 -2 min -1 and 2.4 x 10 -2 min -1 for TiO 2 nanowires and P25, respectively.

36 MATERIALS SCIENCE↗

Vapor-Phase Cyclohexene Epoxidation by Single-Ion Fe(III) Sites in Metal–Organic Frameworks

Heterogeneous catalysts supported on metal–organic frameworks (MOFs), which possess uniform porosity and crystallinity, have attracted significant interest for recent years due to the ease of active-site characterization via X-ray diffraction and the subsequent relation of the active site structure to the catalytic activity. We report the syntheses, structures, and oxidation catalytic activities of single-ion iron catalysts incorporated into the zirconium MOF NU-1000. Single-ion iron catalysts with different counteranions were anchored onto the Zr node through postsynthetic solvothermal deposition. Crystallographic characterization of the resulting MOFs (NU-1000-Fe-Cl and NU-1000-Fe-NO 3 ) revealed that, while both frameworks have similar Fe coordination, the distance between Fe and the Zr 6 node differs significantly between the two. Lastly, the product rate profiles of the two catalysts for vapor-phase cyclohexene epoxidation demonstrate different initial rates and product formations, likely originating from the different Fe–O distances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel thin/tunable gas diffusion electrodes with ultra-low catalyst loading for hydrogen evolution reactions in proton exchange membrane electrolyzer cells

Proton exchange membrane electrolyzer cells (PEMECs) have received great attention for hydrogen/oxygen production due to their high efficiencies even at low-temperature operation. Because of the high cost of noble platinum-group metal (PGM) catalysts (Ir, Ru, Pt, etc.) that are widely used in water splitting, a PEMEC with low catalyst loadings and high catalyst utilizations is strongly desired for its wide commercialization. In this study, the ultrafast and multiscale hydrogen evolution reaction (HER) phenomena in an operating PEMEC is in-situ observed for the first time. The visualization results reveal that the HER and hydrogen bubble nucleation mainly occur on catalyst layers at the rim of the pores of the thin/tunable liquid/gas diffusion layers (TT-LGDLs). This indicates that the catalyst material of the conventional catalyst-coated membrane (CCM) that is located in the middle area of the LGDL pore is underutilized/inactive. Based on this discovery, a novel thin and tunable gas diffusion electrode (GDE) with a Pt catalyst thickness of 15 nm and a total thickness of about 25 um has been proposed and developed by taking advantage of advanced micro/nano manufacturing. The novel thin GDEs are comprehensively characterized both ex-situ and in-situ, and exhibit excellent PEMEC performance. More importantly, they achieve catalyst mass activity of up to 58 times higher than conventional CCM at 1.6 V under the operating conditions of 80 degrees C and 1 atm. This study demonstrates a promising concept for PEMEC electrode development, and provides a direction of future catalyst designs and fabrications for electrochemical devices.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Synthesis of Colloidal Pd/Au Dilute Alloy Nanocrystals and Their Potential for Selective Catalytic Oxidations

Selective oxidations are crucial for the creation of valuable chemical building blocks but often require expensive and unstable stoichiometric oxidants such as hydroperoxides and peracids. To date, many catalysts that contain a single type of active site have not been able to attain the desired level of selectivity for partially oxidized products over total combustion. However, catalysts containing multiple types of active sites have proven to be successful for selective reactions. One category of such catalysts is bimetallic alloys, in which catalytic activity and selectivity can be tuned by modifying the surface composition. Traditional catalyst synthesis methods using impregnation struggle to create catalysts with sufficient control over surface chemistry to accurately tune the ensemble size of the desired active sites. Here in this paper, we describe the synthesis of colloidal nanocrystals of dilute alloys of palladium and gold. We show that when supported on titania (TiO 2 ), tuning the composition of the Pd/Au nanocrystal surface provides a synergistic effect in the selective oxidation of 2-propanol to acetone in the presence of H 2 and O 2 . In particular, we show that certain Pd/Au surface ratios exhibit activity and selectivity far superior to Pd or Au individually. Through precise structural characterization we demonstrate that isolated atoms of Pd exist in the most active catalysts. The synergy between isolated Pd atoms and Au allows for the formation of reactive oxidizing species, likely hydroperoxide groups, responsible for selective oxidation while limiting oxygen dissociation and, thus, complete combustion. This work opens the way to more efficient utilization of scarce noble metals and new options for catalyzed selective oxidations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ Characterization of Cu/CeO 2 Nanocatalysts during CO 2 Hydrogenation: Morphological Effects of Nanostructured Ceria on the Catalytic Activity

Here, a combination of time-resolved X-ray diffraction (TR-XRD), ambient-pressure X-ray photoelectron spectroscopy (AP-XPS) and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) was used to carry out an in-situ characterization of Cu/CeO 2 nanocatalysts during the hydrogenation of CO 2 . Morphological effects of the ceria supports on the catalytic performances were investigated by examining the behavior of copper/ceria-nanorods (NR) and nanospheres (NS). At atmospheric pressures, the hydrogenation of CO 2 on the copper-ceria catalysts produced mainly CO through the reverse-water gas shift reaction (RWGS) and a negligible amount of methanol. The Cu/CeO 2 -NR catalyst displayed the higher activity, which demonstrates that the RWGS is a structure sensitive reaction. In-situ TR-XRD and AP-XPS characterization showed significant changes in the chemical state of the catalysts under reaction conditions with the copper being fully reduced and a partial Ce 4+ to Ce 3+ transformation occurring. A more effective CO 2 dissociative activation at high temperature and a preferential formation of active bidentate carbonate and formate intermediates over CeO 2 (110) terminations are probably the main reasons for the better performance of the Cu/CeO 2 -NR catalyst in the RWGS reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface and Structural Investigation of a MnO x Birnessite‐Type Water Oxidation Catalyst Formed under Photocatalytic Conditions

Abstract Catalytically active MnO x species have been reported to form in situ from various Mn‐complexes during electrocatalytic and solution‐based water oxidation when employing cerium(IV) ammonium ammonium nitrate (CAN) oxidant as a sacrificial reagent. The full structural characterization of these oxides may be complicated by the presence of support material and lack of a pure bulk phase. For the first time, we show that highly active MnO x catalysts form without supports in situ under photocatalytic conditions. Our most active 4 MnO x catalyst (∼0.84 mmol O 2 mol Mn −1 s −1 ) forms from a Mn 4 O 4 bearing a metal–organic framework. 4 MnO x is characterized by pair distribution function analysis (PDF), Raman spectroscopy, and HR‐TEM as a disordered, layered Mn‐oxide with high surface area (216 m 2 g −1 ) and small regions of crystallinity and layer flexibility. In contrast, the S MnO x formed from Mn 2+ salt gives an amorphous species of lower surface area (80 m 2 g −1 ) and lower activity (∼0.15 mmol O 2 mol Mn −1 s −1 ). We compare these catalysts to crystalline hexagonal birnessite, which activates under the same conditions. Full deconvolution of the XPS Mn2p 3/2 core levels detects enriched Mn 3+ and Mn 2+ content on the surfaces, which indicates possible disproportionation/comproportionation surface equilibria.

Deibert, Benjamin J.↗