Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron backscattered diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,162 records · Page 65

Green cubic GaInN/GaN light-emitting diode on microstructured silicon (100)

GaInN/GaN light-emitting diodes free of piezoelectric polarization were prepared on standard electronic-grade Si(100) substrates. Micro-stripes of GaN and GaInN/GaN quantum wells in the cubic crystal structure were grown on intersecting (111) planes of microscale V-grooved Si in metal-organic vapor phase epitaxy, covering over 50% of the wafer surface area. Crystal phases were identified in electron back-scattering diffraction. A cross-sectional analysis reveals a cubic structure virtually free of line defects. Electroluminescence over 20 to 100 μA is found fixed at 487 nm (peak), 516 nm (dominant). Such structures therefore should allow higher efficiency, wavelength-stable light emitters throughout the visible spectrum.

36 MATERIALS SCIENCE↗

Onset and saturation of backward stimulated Raman scattering of laser in trapping regime in three spatial dimensions

A suite of three-dimensional (3D) VPIC[K. J. Bowers et al., Phys. Plasmas 15, 055703 (2008)] particle-in-cell simulations of backward stimulated Raman scattering (SRS) in inertial confinement fusion hohlraum plasma has been performed on the heterogeneous multicore supercomputer, Roadrunner, presently the world's most powerful supercomputer. These calculations reveal the complex nonlinear behavior of SRS and point to a new era of 'at scale' 3D modeling of SRS in solitary and multiple laser speckles. The physics governing nonlinear saturation of SRS in a laser speckle in 3D is consistent with that of prior two-dimensional (2D) studies [L. Yin et al., Phys. Rev. Lett. 99, 265004 (2007)], but with important differences arising from enhanced diffraction and side loss in 3D compared with 2D. In addition to wave front bowing of electron plasma waves (EPWs) due to trapped electron nonlinear frequency shift and amplitude-dependent damping, we find for the first time that EPW self-focusing, which evolved from trapped particle modulational instability [H. A. Rose and L. Yin, Phys. Plasmas 15, 042311 (2008)], also exhibits loss of angular coherence by formation of a filament necklace, a process not available in 2D. These processes in 2D and 3D increase the side-loss rate of trapped electrons, increase wave damping, decrease source coherence for backscattered light, and fundamentally limit how much backscatter can occur from a laser speckle. For both SRS onset and saturation, the nonlinear trapping induced physics is not captured in linear gain modeling of SRS. A simple metric is described for using single-speckle reflectivities obtained from VPIC simulations to infer the total reflectivity from the population of laser speckles of amplitude sufficient for significant trapping-induced nonlinearity to arise.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gas source molecular beam epitaxy of scandium nitride on silicon carbide and gallium nitride surfaces

Scandium nitride (ScN) is a group IIIB transition metal nitride semiconductor with numerous potential applications in electronic and optoelectronic devices due to close lattice matching with gallium nitride (GaN). However, prior investigations of ScN have focused primarily on heteroepitaxial growth on substrates with a high lattice mismatch of 7%–20%. In this study, the authors have investigated ammonia (NH{sub 3}) gas source molecular beam epitaxy (NH{sub 3}-GSMBE) of ScN on more closely lattice matched silicon carbide (SiC) and GaN surfaces (<3% mismatch). Based on a thermodynamic analysis of the ScN phase stability window, NH{sub 3}-GSMBE conditions of 10{sup −5}–10{sup −4} Torr NH{sub 3} and 800–1050 °C where selected for initial investigation. In-situ x-ray photoelectron spectroscopy (XPS) and ex-situ Rutherford backscattering measurements showed all ScN films grown using these conditions were stoichiometric. For ScN growth on 3C-SiC (111)-(√3 × √3)R30° carbon rich surfaces, the observed attenuation of the XPS Si 2p and C 1s substrate core levels with increasing ScN thickness indicated growth initiated in a layer-by-layer fashion. This was consistent with scanning electron microscopy (SEM) images of 100–200 nm thick films that revealed featureless surfaces. In contrast, ScN films grown on 3C-SiC (111)-(3 × 3) and 3C-SiC (100)-(3 × 2) silicon rich surfaces were found to exhibit extremely rough surfaces in SEM. ScN films grown on both 3C-SiC (111)-(√3 × √3)R30° and 2H-GaN (0001)-(1 × 1) epilayer surfaces exhibited hexagonal (1 × 1) low energy electron diffraction patterns indicative of (111) oriented ScN. X-ray diffraction ω-2θ rocking curve scans for these same films showed a large full width half maximum of 0.29° (1047 arc sec) consistent with transmission electron microscopy images that revealed the films to be poly-crystalline with columnar grains oriented at ≈15° to the [0001] direction of the 6H-SiC (0001) substrate. In-situ reflection electron energy loss spectroscopy measurements determined the band-gap for the NH{sub 3}-GSMBE ScN films to be 1.5 ± 0.3 eV, and thermal probe measurements indicated all ScN films to be n-type. The four point probe sheet resistance of the ScN films was observed to increase with decreasing growth temperature and decreased with unintentional oxygen incorporation. Hg probe capacitance–voltage measurements indicated N{sub D}-N{sub A} decreased with decreasing growth temperature from 10{sup 19} to 10{sup 20}/cm{sup 3} for the lowest resistivity films to ≅5 × 10{sup 16}/cm{sup 3} for the highest resistivity films. In-situ ultraviolet photoelectron spectroscopy measurements additionally showed the valence band maximum moving from 1.4 to 0.8 eV below the Fermi level with decreasing growth temperature consistent with the increased resistivity and reduction in carrier concentration. These results suggest that additional reductions in ScN carrier concentrations can be achieved via continued optimization of ScN growth conditions and selection of substrate orientation and surface termination.

36 MATERIALS SCIENCE↗

Compositional dependence of the band-gap of Ge{sub 1−x−y}Si{sub x}Sn{sub y} alloys

The group-IV semiconductor alloy Ge{sub 1−x−y}Si{sub x}Sn{sub y} has recently attracted great interest due to its prospective potential for use in optoelectronics, electronics, and photovoltaics. Here, we investigate molecular beam epitaxy grown Ge{sub 1−x−y}Si{sub x}Sn{sub y} alloys lattice-matched to Ge with large Si and Sn concentrations of up to 42% and 10%, respectively. The samples were characterized in detail by Rutherford backscattering/channeling spectroscopy for composition and crystal quality, x-ray diffraction for strain determination, and photoluminescence spectroscopy for the assessment of band-gap energies. Moreover, the experimentally extracted material parameters were used to determine the SiSn bowing and to make predictions about the optical transition energy.

36 MATERIALS SCIENCE↗

Residual Strain Analysis in Linear Friction Welds of Similar and Dissimilar Titanium Alloys Using Energy Dispersive X-ray Diffraction

Residual strains in linear friction welds (LFW) of similar, Ti-6Al-4V (Ti64) welded to Ti-6Al-4V, and dissimilar, Ti-6Al-4V welded to Ti-5Al-5V-5Mo-3Cr (Ti5553), titanium alloys have been characterized using energy-dispersive X-ray diffraction. For each type of LFW, one sample was chosen in the as-welded (AW) condition and another sample was selected after a post-weld heat treatment (HT). Residual strains have been separately studied in the alpha and beta phases of the material, and five components (three axial and two shear) have been reported in each case. In-plane axial components of the residual strains show a smooth and symmetric behavior about the weld center for the Ti64-Ti64 LFW samples in the AW condition, whereas these components in the Ti64-Ti5553 LFW sample show a symmetric trend with jump discontinuities. Such jump discontinuities, observed in both the AW and HT conditions of the Ti64-Ti5553 samples, suggest different strain-free lattice parameters in the weld region and the parent material, whereas the results from the Ti64-Ti64 LFW samples in both AW and HT conditions suggest nearly uniform strain-free lattice parameters throughout the weld region. Finally, the observed trends in the in-plane axial residual strain components have been rationalized by the corresponding microstructural changes and variations across the weld region via backscatter electron (BSE) images.

36 MATERIALS SCIENCE↗

Beyond magnons in Nd 2 ScNbO 7 : An Ising pyrochlore antiferromagnet with all-in–all-out order and random fields

We report the low-temperature magnetic properties of Nd 3+ pyrochlore Nd 2 ScNbO 7 . Susceptibility and magnetization show an easy-axis moment, and heat capacity reveals a phase transition to long-range order at T N =371(2) mK with a fully recovered ΔS=Rln(2), 53% of it recovered for T>T N . Elastic neutron scattering shows a long-range all-in all-out magnetic order with low-Q diffuse elastic scattering. Inelastic neutron scattering shows a low-energy flat band, indicating a magnetic Hamiltonian similar to Nd 2 Zr 2 O 7 . Nuclear hyperfine excitations measured by ultra-high-resolution neutron backscattering indicate a distribution of static electronic moments below T N , which may be due to B-site disorder influencing Nd crystal electric fields. Analysis of heat-capacity data shows an unexpected T-linear or T 3/2 term which is inconsistent with conventional magnon quasiparticles, but is consistent with fractionalized spinons or gapless local spin excitations. We use legacy data to show similar behavior in Nd 2 Zr 2 O 7 . Comparing local static moments also reveals a suppression of the nuclear Schottky anomaly in temperature, evidencing a fraction of Nd sites with nearly zero static moment, consistent with exchange-disorder-induced random singlet formation. Finally, taken together, these measurements suggest an unusual fluctuating magnetic ground state which mimics a spin liquid, but may not actually be one.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of the Wymark CO2 Reservoir: A Natural Analog to Long-Term CO2 Storage at Weyburn

Natural accumulations of CO{sub 2} occur in the Duperow and other Devonian strata on the western flank of the Williston Basin in lithologies very similar to those into which anthropogenic CO{sub 2} is being injected as part of an EOR program in the Weyburn-Midale pool. Previous workers have established the stratgraphic and petrographic similarities between the Duperow and Midale beds (Lake and Whittaker, 2004 and 2006). As the CO{sub 2} accumulations in the Devonian strata may be as old as 50 Ma, this similarity provides confidence in the efficacy of long-term geologic sequestration of CO{sub 2} in the Midale-Weyburn pool. Here we attempt to extend this comparison with whole rock and mineral chemistry using the same sample suite used by Lake and Whittaker. We provide XRD, XRF, and electron microprobe analysis of major constituent minerals along with extensive backscattered electron and x-ray imaging to identify trace phases and silicate minerals. LPNORM analysis is used to quantify modal concentrations of minerals species. Samples from depth intervals where CO{sub 2} has been observed are compared to those where CO{sub 2} was absent, with no systematic differences in mineral composition observed. Gas accumulation can be correlated with sample porosity. In particular gas-bearing samples from the Eastend region are more porous than the overlying gas-free samples. Silicate minerals are rare in the Duperow carbonates, never exceeding 3 wt%. As such, mineral trapping is precluded in these lithologies. The geochemical data presented here will be used for comparison with a similar geochemical-mineralogical study of the Midale (Durocher et al., 2003) in a subsequent report.

58 GEOSCIENCES↗

Development of Acoustic Backscatter for In Situ Monitoring of Nuclear Sludge Wastes During Transfer - 20117

This paper presents an overview into the use of acoustic backscatter systems (ABS) for the in situ characterization of nuclear waste sludge concentration, size and aggregation, highlighting key achievements from the University of Leeds. Previous projects funded through the Engineering and Physical Sciences Research Council (EPSRC) UK and Innovate UK are firstly reviewed and linked to current research within the new TRANSCEND consortium. Detailed are a number of developments at various stages of technology readiness level, from the use of ABS to monitor small-scale sludge settling in columns, to large-scale jet-mixing and waste transfer operations. Current work with Sellafield Ltd will see new technology and world leading analysis methods deployed to measure the consolidation of complex wastes currently undergoing containment, the first time full industrial utilization of these systems has been achieved. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A multi-technique analysis of deuterium trapping and near-surface precipitate growth in plasma-exposed tungsten

In this work, we examine how deuterium becomes trapped in plasma-exposed tungsten and forms near-surface platelet-shaped precipitates. How these bubbles nucleate and grow, as well as the amount of deuterium trapped within, is crucial for interpreting the experimental database. Here, we use a combined experimental/theoretical approach to provide further insight into the underlying physics. With the Tritium Plasma Experiment, we exposed a series of ITER-grade tungsten samples to high flux D plasmas (up to 1.5 × 10{sup 22 }m{sup −2} s{sup −1}) at temperatures ranging between 103 and 554 °C. Retention of deuterium trapped in the bulk, assessed through thermal desorption spectrometry, reached a maximum at 230 °C and diminished rapidly thereafter for T > 300 °C. Post-mortem examination of the surfaces revealed non-uniform growth of bubbles ranging in diameter between 1 and 10 μm over the surface with a clear correlation with grain boundaries. Electron back-scattering diffraction maps over a large area of the surface confirmed this dependence; grains containing bubbles were aligned with a preferred slip vector along the <111> directions. Focused ion beam profiles suggest that these bubbles nucleated as platelets at depths of 200 nm–1 μm beneath the surface and grew as a result of expansion of sub-surface cracks. To estimate the amount of deuterium trapped in these defects relative to other sites within the material, we applied a continuum-scale treatment of hydrogen isotope precipitation. In addition, we propose a straightforward model of near-surface platelet expansion that reproduces bubble sizes consistent with our measurements. For the tungsten microstructure considered here, we find that bubbles would only weakly affect migration of D into the material, perhaps explaining why deep trapping was observed in prior studies with plasma-exposed neutron-irradiated specimens. We foresee no insurmountable issues that would prevent the theoretical framework developed here from being extended to a broader range of systems where precipitation of insoluble gases in ion beam or plasma-exposed metals is of interest.

36 MATERIALS SCIENCE↗

Preparation, phase structure and microwave dielectric properties of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramic

Graphical abstract: For chemical compatibility tests with silver electrode, mixtures of ceramic powders with 20 wt% Ag powders were cofired and analyzed to detect interactions between the low-fired samples and electrodes. XRD patterns and backscattered electron image of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics added with 1.5 wt% BCB cofired with Ag at 900 Degree-Sign C for 2 h are presented in . Backscattered electron image analysis reveals no interaction to form new phases after firing. This observation is also confirmed by the evidence of no difference between the XRD patterns before and after firing. It is obvious that the reaction of low-fired CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics with Ag electrodes did not occur. Highlights: Black-Right-Pointing-Pointer A new microwave dielectric ceramic with good properties was reported. Black-Right-Pointing-Pointer The addition of BaCu(B{sub 2}O{sub 5}) can lower the sintering temperature from 1050 Degree-Sign C to 900 Degree-Sign C. Black-Right-Pointing-Pointer The addition of BaCu(B{sub 2}O{sub 5}) does not induce degradation of properties. Black-Right-Pointing-Pointer BCB added CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics can co-fire with Ag electrode. -- Abstract: A new low loss microwave dielectric ceramic with composition of CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} was prepared by a conventional solid-state reaction method. The compound has a cubic spinel structure [Fd-3m (227)] similar to MgFe{sub 2}O{sub 4} with lattice parameters of a = 8.3939 Angstrom-Sign , V = 591.42 Angstrom-Sign {sup 3}, Z = 8 and {rho} = 4.30 g/cm{sup 3}. This ceramic has a low sintering temperature ({approx}1050 Degree-Sign C) and good microwave dielectric properties with relative permittivity of 21.4, Q Multiplication-Sign f value of 35,000 GHz and {tau}{sub f} value of -22 ppm/ Degree-Sign C. Furthermore, the addition of BaCu(B{sub 2}O{sub 5}) (BCB) can effectively lower the sintering temperature from 1050 Degree-Sign C to 900 Degree-Sign C and does not induce much degradation of the microwave dielectric properties. Compatibility with Ag electrode indicates that the BCB added CoLi{sub 2/3}Ti{sub 4/3}O{sub 4} ceramics are good candidates for LTCC applications.

36 MATERIALS SCIENCE↗