Search NASA⌕ Search

SEARCH · Search NASA

Results for “electron probe data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Evaluation of COTS Electronic Parts for Extreme Temperature Use in NASA Missions

Electronic systems capable of extreme temperature operation are required for many future NASA space exploration missions where it is desirable to have smaller, lighter, and less expensive spacecraft and probes. Presently, spacecraft on-board electronics are maintained at about room temperature by use of thermal control systems. An Extreme Temperature Electronics Program at the NASA Glenn Research Center focuses on development of electronics suitable for space exploration missions. The effects of exposure to extreme temperatures and thermal cycling are being investigated for commercial-off-the-shelf components as well as for components specially developed for harsh environments. An overview of this program along with selected data is presented.

Patterson, Richard L.↗

Flowing Plasma Interaction with an Electric Sail Tether Element

Electric sails are a relatively new concept for providing high speed propellant-less propulsion. Employing multiple tethers biased to high positive voltage levels (kV), electric sails are designed to gain momentum from the solar wind by repelling solar wind protons. To maximize the area of the sail that interacts with the solar wind, electric sails rely on the formation of a large plasma sheath around each small diameter tether. Motivated by interest in advancing the development of electric sails, a set of laboratory tests has been conducted to study the interaction of a drifting plasma with a sheath formed around a small diameter tether element biased at positive voltages. The laboratory test setup was created with Debye length scaling in mind to offer a path to extrapolate (via modeling) to full scale electric sail missions. Using an instrument known as a Differential Ion Flux Probe (DIFP) the interaction between a positively biased tether element and a drifting plasma has been measured for several scenarios. Clear evidence of the tether element sheath deflecting ions has been obtained. Maps of the flow angle downstream from the tether element have been made and they show the influence of the plasma sheath. Finally, electron current collection measurements have been made for a wide range of plasma conditions and tether element bias voltages. The electron collection data will have an impact on electric sail power requirements, as high voltage power supplies and electron guns will have to be sized to accommodate the electron currents collected by each tether.

Schneider, Todd↗

New Physics in the Hot Electron Furnace (Final Report)

The primary purpose of this award was experiments and simulations related to the idea of a ‘Hot Electron Furnace’ where nonlocal heat transport would allow unique new experimental opportunities at x-ray free electron lasers. The period of this award included beamtime at the MEC endstation of the LCLS, and the execution of those experiments was a primary goal. Unfortunately, the beamtime had limited success due to (1) inability of the LCLS to deliver the expected two-color operations mode, and (2) failure of the MEC endstation’s own software to save the cavity timing data that would have allowed inference of time delays for the few hours when two-color mode briefly operated. The beamtime was then switched to operate in single-color (one pulse) mode, and studies were performed of x-ray heating and probe, simultaneously. Two interesting manuscripts are finally near submission, having been delayed by student graduations, need for collaborator simulations of x-ray heating processes, and then COVID. I am hopeful that they will soon be submitted (especially the paper on x-ray heating of MgO) because one of the principal students involved has returned from industry to take a postdoc position at SLAC. Below, we first list all publications and other work products (including the two that are nearing submission) and then summarize several outcomes from this effort. During the term of this award three UW physics graduate students were at least partially supported, and all three received their Ph.D.’s with significant components of their supported work in the dissertation.

47 OTHER INSTRUMENTATION↗

Electronic clinical predictive thermometer using logarithm for temperature prediction

A thermometer that rapidly predicts body temperature based on the temperature signals received from a temperature sensing probe when it comes into contact with the body. The logarithms of the differences between the temperature signals in a selected time frame are determined. A line is fit through the logarithms and the slope of the line is used as a system time constant in predicting the final temperature of the body. The time constant in conjunction with predetermined additional constants are used to compute the predicted temperature. Data quality in the time frame is monitored and if unacceptable, a different time frame of temperature signals is selected for use in prediction. The processor switches to a monitor mode if data quality over a limited number of time frames is unacceptable. Determining the start time on which the measurement time frame for prediction is based is performed by summing the second derivatives of temperature signals over time frames. When the sum of second derivatives in a particular time frame exceeds a threshold, the start time is established.

Cambridge, Vivien J.↗

Probing the cosmic causes of errors in supercomputers

Cosmic rays from outer space are causing errors in supercomputers. The neutrons that pass through the CPU may be causing binary data to flip leading to incorrect calculations. Los Alamos National Laboratory has developed detectors to determine how much data is being corrupted by these cosmic particles.

54 ENVIRONMENTAL SCIENCES↗

Search for long-lived heavy neutrinos in the decays of B mesons produced in proton-proton collisions at $ \sqrt{s} $ = 13 TeV

A search for long-lived heavy neutrinos (N) in the decays of B mesons produced in proton-proton collisions at $ \sqrt{s} $ = 13 TeV is presented. The data sample corresponds to an integrated luminosity of 41.6 fb$^{−1}$ collected in 2018 by the CMS experiment at the CERN LHC, using a dedicated data stream that enhances the number of recorded events containing B mesons. The search probes heavy neutrinos with masses in the range 1 < m$_{N}$ < 3 GeV and decay lengths in the range 10$^{−2}$ < cτ$_{N}$ < 10$^{4}$ mm, where τ$_{N}$ is the N proper mean lifetime. Signal events are defined by the signature B → ℓ$_{B}$NX; N → ℓ$^{±}$π$^{∓}$, where the leptons ℓ$_{B}$ and ℓ can be either a muon or an electron, provided that at least one of them is a muon. The hadronic recoil system, X, is treated inclusively and is not reconstructed. No significant excess of events over the standard model background is observed in any of the ℓ$^{±}$π$^{∓}$ invariant mass distributions. Limits at 95% confidence level on the sum of the squares of the mixing amplitudes between heavy and light neutrinos, |V$_{N}$|$^{2}$, and on cτ$_{N}$ are obtained in different mixing scenarios for both Majorana and Dirac-like N particles. The most stringent upper limit |V$_{N}$|$^{2}$ < 2.0 × 10$^{−5}$ is obtained at m$_{N}$ = 1.95 GeV for the Majorana case where N mixes exclusively with muon neutrinos. The limits on |V$_{N}$|$^{2}$ for masses 1 < m$_{N}$ < 1.7 GeV are the most stringent from a collider experiment to date.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rate Limiting Regimes in Photochemical H2 Generation by Complexes of Colloidal CdS Nanorods and Hydrogenase

Driving redox enzyme catalysis with photoexcited semiconductor nanocrystals is a compelling approach for chemical conversion. We examined how the interplay of the many chemical steps involved determines the rates of photochemical H2 production with complexes of colloidal CdS nanorods and an [FeFe]-hydrogenase. We elucidated the roles of three critical and previously elusive processes-scavenging of photoexcited holes from nanorods, back-electron transfer, and H2 oxidation. Kinetic Monte Carlo simulations and fitting to experimental data revealed that hole transfer becomes the rate-limiting step at high illumination intensities. Comparisons of simulations to experimental H2 production showed that both back-electron transfer and H2 oxidation play an efficiency-limiting role at high catalyst loadings. This work provides guiding principles for tuning experimental parameters to minimize energy-wasting pathways and optimize photochemical product formation. More broadly, we demonstrate how critical but elusive chemical steps in photochemical reactions can be probed with a combination of experiments and simulations.

08 HYDROGEN↗

Time-resolved photoelectron spectroscopy of a dinuclear Pt(II) complex: Tunneling autodetachment from both singlet and triplet excited states of a molecular dianion

Time-resolved pump-probe photoelectron spectroscopy has been used to study the relaxation dynamics of gaseous [Pt{sub 2}(μ-P{sub 2}O{sub 5}H{sub 2}){sub 4} + 2H]{sup 2−} after population of its first singlet excited state by 388 nm femtosecond laser irradiation. In contrast to the fluorescence and phosphorescence observed in condensed phase, a significant fraction of the photoexcited isolated dianions decays by electron loss to form the corresponding monoanions. Our transient photoelectron data reveal an ultrafast decay of the initially excited singlet {sup 1}A{sub 2u} state and concomitant rise in population of the triplet {sup 3}A{sub 2u} state, via sub-picosecond intersystem crossing (ISC). We find that both of the electronically excited states are metastably bound behind a repulsive Coulomb barrier and can decay via delayed autodetachment to yield electrons with characteristic kinetic energies. While excited state tunneling detachment (ESETD) from the singlet {sup 1}A{sub 2u} state takes only a few picoseconds, ESETD from the triplet {sup 3}A{sub 2u} state is much slower and proceeds on a time scale of hundreds of nanoseconds. The ISC rate in the gas phase is significantly higher than in solution, which can be rationalized in terms of changes to the energy dissipation mechanism in the absence of solvent molecules. [Pt{sub 2}(μ-P{sub 2}O{sub 5}H{sub 2}){sub 4} + 2H]{sup 2−} is the first example of a photoexcited multianion for which ESETD has been observed following ISC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutrino oscillations, Lorentz/CPT violation, and dark energy

If dark energy (DE) couples to neutrinos, then there may be apparent violations of Lorentz/CPT invariance in neutrino oscillations. The DE-induced Lorentz/CPT violation takes a specific form that introduces neutrino oscillations that are energy independent, differ for particles and antiparticles, and can lead to novel effects for neutrinos propagating through matter. We show that ultra-high-energy neutrinos may provide one avenue to seek this type of Lorentz/CPT violation in {nu}{sub {mu}}-{nu}{sub {tau}} oscillations, improving the current sensitivity to such effects by 7 orders of magnitude. Lorentz/CPT violation in electron-neutrino oscillations may be probed with the zenith-angle dependence for high-energy atmospheric neutrinos. More compelling evidence for a DE-neutrino coupling would be provided by a dependence of neutrino oscillations on the direction of the neutrino momentum relative to our peculiar velocity with respect to the cosmic microwave background rest frame. While the amplitude of this directional dependence is expected to be small, it may nevertheless be worth seeking in current data and may be a target for future neutrino experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First observations of solar halo gamma rays over a full solar cycle

We analyze 15 years of Fermi-LAT data and produce a detailed model of the Sun’s inverse-Compton scattering emission (solar halo), which is powered by interactions between ambient cosmic-ray electrons and positrons with sunlight. By developing a novel analysis method to analyze moving sources, we robustly detect the solar halo at energies between 31.6 MeV and 100 GeV, and angular extensions up to 45° from the Sun, providing new insight into spatial regions where there are no direct measurements of the Galactic cosmic-ray flux. The large statistical significance of our signal allows us to subdivide the data and provide the first 𝛾-ray probes into the time variation and azimuthal asymmetry of the solar modulation potential, finding time-dependent changes in solar modulation both parallel and perpendicular to the ecliptic plane. Our results are consistent with (but with independent uncertainties from) local cosmic-ray measurements, unlocking new probes into astrophysical processes near the solar surface.

79 ASTRONOMY AND ASTROPHYSICS↗

Electronic Raman scattering and the renormalization of the electron spectrum in LuB{sub 12}

The electronic Raman scattering in LuB{sub 12} single crystals of various isotope compositions is studied in the temperature range 10–650 K. The shape and the energy position of spectral maxima depend on the direction and magnitude of a probe wavevector, the temperature, and the excitation symmetry and remain unchanged when the isotope composition changes. Experimental spectra are compared with the spectra simulated on the basis of a calculated electronic structure. The experimental results are successfully described when the electron spectrum renormalization effects caused by electron–phonon coupling are taken into account. This confirms that the origin of the observed spectra in LuB{sub 12} is due to Raman scattering by electrons. A comparison of the calculated and experimental data makes it possible to determine the coupling constant (λ{sub ep} = 0.32) that gives the correct superconducting transition temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure behavior of cuprospinel CuFe 2 O 4 : Influence of the Jahn-Teller effect on the spinel structure

The Jahn-Teller-effect at Cu 2+ in cuprospinel CuFe 2 O 4 was investigated using high-pressure, single crystal synchrotron x-ray diffraction (XRD) techniques at beamline BL10A at the Photon Factory, KEK, Japan. Six data sets were collected in the pressure range from ambient to 5.9 GPa at room temperature. Structural refinements based on the data were performed at 0.0, 1.8, 2.7, and 4.6 GPa. The unit cell volume of cuprospinel decreases continuously from 590.8 (6) Å 3 to 579.5 (8) Å 3 up to 3.8 GPa. Leastsquares fitting to a third-order Birch-Murnaghan equation of state yields zero-pressure volume V 0 = 590.7 (1) Å 3 and bulk modulus K 0 = 188.1 (4.4) GPa with K’ fixed at 4.0. The crystal chemical composition determined by electron-probe analysis and x-ray site-occupancy refinement is represented as [Cu 0.526 Fe 0.474 ] [6] [Cu 0.074 Fe 1.926 ]O 4 . Most of the Cu 2+ are preferentially distributed onto the tetrahedral (T) site of the spinel structure. At 4.6 GPa, a cubic-tetragonal phase transition is indicated by a splitting of the a axis of the cubic structure into a smaller a axis and a longer c axis, with unit cell parameters a = 5.882 (1) Å and c = 8.337 (1) Å. The tetragonal crystal structure with space group I4 1 /amd was refined to R1 = 0.0182 and wR2 = 0.0134 using observed 35 x-ray reflections. At the T site, the tetrahedral O-T-O bond angles along the c-axis direction of the unit cell decreases slightly from 109.47 ° to 108.7 (4) °, which generates a stretched tetrahedral geometry along the c-axis. The cubic-totetragonal transition induced by the Jahn-Teller effect at Cu 2+ is attributable to the angular distortion at the tetrahedral site. At the octahedral (M) site, on the other hand, the two M-O bonds parallel to the caxis are shortened with respect to the four M-O bonds parallel to the ab-plane, which are lengthened as a result of the phase transition, leading to a compressed octahedral geometry along the c-axis. With the competing distortions between the stretched tetrahedron and the compressed octahedron along the c-axis, the a unit cell parameter is shortened with respect to the c unit cell parameter, giving a c/a ratio slightly greater than unity as referred to cubic lattice (c/a = 1.002). The c/a value increases to 1.007 with pressure, suggesting a further evolution of the stretched tetrahedron and the compressed octahedron. The variation of c/a ratio of the cuprospinel is similar to that observed in the tetragonally distorted cuprospinel with Cu 2+ fully occupying the octahedral site of the structure.

58 GEOSCIENCES↗

Experimental studies of an ECR plasma thruster

The Electron Cyclotron Resonance (ECR) thruster is a proposed electrodeless space electric propulsion device with interesting and little understood physics. A laboratory ECR thruster was run in a vacuum tank at pressures in the 10 exp -5 torr range using 2.12 GHz microwave beam and Ar gas propellant. Movable diagnostic probes (a Faraday cup and a gridded energy analyzer) measured plasma characteristics as propellant gas flow rate and input microwave power level were varied. Ion energy and flux data were used to calculate I(sp), propulsive efficiency, and thrust. The ion flux profiles show an unexpected depression on the thruster axis for low tank pressures that disappears as the tank pressure increases. Ion energies decrease as the flow rate and pressure increase, but the microwave power level affects the energy only negligibly. The calculated propulsion parameters demonstrate that the efficiency of the laboratory device is low, and that tank pressure greatly changes the performance.

Kaufman, D. A.↗

Characterization of an 8-cm Diameter Ion Source System

Results of tests characterizing an 8-cm diameter ion source are presented. The tests were conducted in three separate vacuum test facilities at the University of Alabama-Huntsville, Colorado State University, and L3 Communications' ETI division. Standard ion optics tests describing electron backstreaming and total-voltage-limited impingement current behavior as a function of beam current were used as guidelines for selecting operating conditions where more detailed ion beam measurements were performed. The ion beam was profiled using an in-vacuum actuating probe system to determine the total ion current density and the ion charge state distribution variation across the face of the ion source. Both current density and ExB probes were utilized. The ion current density data were used to obtain integrated beam current, beam flatness parameters, and general beam profile shapes. The ExB probe data were used to determine the ratio of doubly to singly charged ion current. The ion beam profile tests were performed at over six different operating points that spanned the expected operating range of the DAWN thrusters being developed at L3. The characterization tests described herein reveal that the 8-cm ion source is suitable for use in (a) validating plasma diagnostic equipment, (b) xenon ion sputtering and etching studies of spacecraft materials, (c) plasma physics research, and (d) the study of ion thruster optics at varying conditions.

Li, Zhongmin↗

Observations of Transient ISS Floating Potential Variations During High Voltage Solar Array Operations

The International Space Station (ISS) continues to be a world-class space research laboratory after over 15 years of operations, and it has proven to be a fantastic resource for observing spacecraft floating potential variations related to high voltage solar array operations in Low Earth Orbit (LEO). Measurements of the ionospheric electron density and temperature along the ISS orbit and variations in the ISS floating potential are obtained from the Floating Potential Measurement Unit (FPMU). In particular, rapid variations in ISS floating potential during solar array operations on time scales of tens of milliseconds can be recorded due to the 128 Hz sample rate of the Floating Potential Probe (FPP) pro- viding interesting insight into high voltage solar array interaction with the space plasma environment. Comparing the FPMU data with the ISS operations timeline and solar array data provides a means for correlating some of the more complex and interesting transient floating potential variations with mission operations. These complex variations are not reproduced by current models and require further study to understand the underlying physical processes. In this paper we present some of the floating potential transients observed over the past few years along with the relevant space environment parameters and solar array operations data.

Willis, Emily M.↗

EMIC-Wave Driven Electron Precipitation Observed by CALET on the International Space Station

We present an analysis of the relativistic electron precipitation (REP) event measured by the CALorimetric Electron Telescope (CALET) experiment on board the International Space Station during a relatively weak geomagnetic storm on 31 December 2016. CALET observations were compared with the measurements of the Van Allen Probes in the near-equatorial plane to investigate the global radiation belt dynamics and the REP drivers. The magnetically conjugate observations from these two missions demonstrate that the significant MeV precipitation directly detected by CALET in low-Earth orbit during a period of radiation belt depletion following the passage of a high-speed stream, was associated with dusk-side electromagnetic ion cyclotron (EMIC) waves. In addition, the combined wave, REP and trapped electron data suggest that the reported radiation belt depletion can be likely ascribed to the concomitant loss effects of EMIC wave scattering driving the atmospheric precipitation, as well as outward radial diffusion associated with magnetopause shadowing.

Radiation belts↗

Accurate Quantification of Si/SiGe Interface Profiles via Atom Probe Tomography

Pulsed laser atom probe tomography (APT) has enabled the investigation of semiconducting materials at sub-nm length scales and 10 ppm chemical sensitivity. This has enabled APT to be the best technique for nanoscale detection of dopant distributions and low levels of chemical segregation at interfaces, which are both important for semiconductor processing; however, the accuracy of measured interfacial profiles is typically compromised by aberrations. Interfacial profiles in APT data will vary with respect to different interfacial combinations, especially when the evaporation field between two materials is drastically different. Here, the ability of APT to measure SiGe/Si/SiGe interfacial profiles is tested with an 8 nm Si well embedded in SiGe. The APT measurements are compared to those measured using scanning transmission electron microscopy (STEM) to evaluate reconstruction and post-reconstruction processing methods to appropriately measure interfacial profiles using APT. Without post-APT reconstruction processing, the measured Si/SiGe interfacial widths between APT and STEM match poorly, but after applying the z-redistribution algorithm, the interfacial profiles are in good agreement. These results indicate that APT can be used to accurately identify SiGe/Si/SiGe interfacial profiles after application of the z-redistribution algorithm, which will greatly impact the synergy between growth and characterization of semiconductor devices using Si/SiGe interfaces.

36 MATERIALS SCIENCE↗

RR Lyrae in XSTPS: The halo density profile in the north galactic cap

We present a catalog of RR Lyrae stars (RRLs) observed by the Xuyi Schmidt Telescope Photometric Survey (XSTPS). The area we consider is located in the north Galactic cap, covering ≈376.75 deg{sup 2} at α ≈ 150° and δ ≈ 27° down to a magnitude limit of i ≈ 19. Using the variability information afforded by the multi-epoch nature of our XSTPS data, combined with colors from the Sloan Digital Sky Survey, we are able to identify candidate RRLs. We find 318 candidates, derive distances to them, and estimate the detection efficiency. The majority of our candidates have more than 12 observations, and for these we are able to calculate periods. These also allow us to estimate our contamination level, which we predict is between 30% and 40%. Finally, we use the sample to probe the halo density profile in the 9-49 kpc range and find that it can be well fitted by a double power law. We find good agreement between this model and the models derived for the south Galactic cap using the Watkins et al. and Sesar et al. RRL data sets, after accounting for possible contamination in our data set from Sagittarius stream members. We consider non-spherical double power-law models of the halo density profile and again find agreement with literature data sets, although we have limited power to constrain the flattening due to our small survey area. Much tighter constraints will be placed by current and future wide-area surveys, most notably ESA's astrometric Gaia mission. Our analysis demonstrates that surveys with a limited number of epochs can effectively be mined for RRLs. Our complete sample is provided as accompanying online material; as an example the first few entries of each electronic table are shown in the text.

79 ASTRONOMY AND ASTROPHYSICS↗