Search NASA⌕ Search

SEARCH · Search NASA

Results for “error fields”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Human heading estimation during visually simulated curvilinear motion

Recent studies have suggested that humans cannot estimate their direction of forward translation (heading) from the resulting retinal motion (flow field) alone when rotation rates are higher than approximately 1 deg/sec. It has been argued that either oculomotor or static depth cues are necessary to disambiguate the rotational and translational components of the flow field and, thus, to support accurate heading estimation. We have re-examined this issue using visually simulated motion along a curved path towards a layout of random points as the stimulus. Our data show that, in this curvilinear motion paradigm, five of six observers could estimate their heading relatively accurately and precisely (error and uncertainty < approximately 4 deg), even for rotation rates as high as 16 deg/sec, without the benefit of either oculomotor or static depth cues signaling rotation rate. Such performance is inconsistent with models of human self-motion estimation that require rotation information from sources other than the flow field to cancel the rotational flow.

NASA Center ARC↗

Adjoint-Based Anisotropic Mesh Adaptation for a Stabilized Finite-Element Flow Solver

An adjoint solver is implemented in the FUN3D stabilized finite-element flow solver. The adjoint solution is used to generate anisotropic, adapted meshes to control error in scalar out- put functionals, such as lift or drag coefficient. The inviscid and turbulent adjoints are verified with a finite-difference derivative approximation and can be used in design optimization in addition to mesh adaptation. The adjoint capability represents an extension of previous research using the FUN3D stabilized finite-element capability with metric-based mesh adaptation and interpolation-based error estimates to generate highly anisotropic adapted meshes for turbulent flows. In the present work, a metric-based approach is again utilized, where the adjoint and the primal solutions both contribute to the generation of a metric tensor field that is subsequently used to produce the required anisotropic mesh for each adaptation cycle. Adaptive results are then shown for an inviscid supersonic flow over a diamond airfoil, inviscid transonic flow over the ONERA M6 wing, and viscous laminar flow over the NACA 0012 airfoil, all using drag force as the output functional. Adjoint-based adaptation is compared with a multiscale solution-based approach that controls the L norm of Mach number interpolation error to demonstrate the effectiveness and effciency of the adjoint-based adaptive mesh technology.

Balan, Aravind↗

Three Dimensional Atmospheric Radiative Transfer-Applications and Methods Comparison

We review applications of 3D radiative transfer in the atmosphere, emphasizing the wide spectrum of scales important to remote sensing and modeling of cloud fields, and the characteristic scales introduced into observed radiances and fluxes by the distribution of photon pathlengths at conservative and absorbing wavelengths. We define the "plane-parallel bias", which is a measure of the importance of 3D cloud structure in large-scale models, and the "independent pixel errors" that quantify the significance of 3D effects in remote sensing, and emphasize their relative magnitude and scale dependence. A variety of approaches in current use in 3D radiative transfer, and issues of speed, accuracy, and flexibility are summarized. We also describe a recently initiated "International Intercomparison of 3-Dimensional Radiation Codes", or I3RC. I3RC is a 3-phase effort that has as its goals to: (1) understand the errors and limits of 3D methods; (2) provide "baseline" cases for future 3D code development; (3) promote sharing of 3D tools; (4) derive guidelines for 3D tool selection; and (5) improve atmospheric science education in 3D radiative transfer. Selected results from Phases 1 and 2 of I3RC are discussed. These are taken from five cloud fields: a 1D field of bar clouds, a 2D radar-derived field, a 3D Landsat-derived field, a stratiform cloud from the model of C. Moeng, and a convective cloud from the model of B. Stevens. Computations have been carried out for three monochromatic wavelengths (one conservative, one absorptive, and one thermal) and two solar zenith angles (0, 60 degrees).

Cahalan, Robert F.↗

Results of the long range position-determining system tests

The long range position-determining system (LRPDS) has been developed by the Corps of Engineers to provide the Field Army with a rapid and accurate positioning capability. The LRPDS consists of an airborne reference position set (RPS), up to 30 ground based positioning sets (PS), and a position computing central (PCC). The PCC calculates the position of each PS based on the range change information provided by each Set. The positions can be relayed back to the PS again via RPS. Each PS unit contains a double oven precise crystal oscillator. The RPS contains a Hewlett-Packard cesium beam standard. Frequency drifts and off-sets of the crystal oscillators are taken in account in the data reduction process. A field test program was initiated in November 1972. A total of 54 flights were made which included six flights for equipment testing and 48 flights utilizing the field test data reduction program. The four general types of PS layouts used were: short range; medium range; long range; tactical configuration. The overall RMS radial error of the unknown positions varied from about 2.3 meters for the short range to about 15 meters for the long range. The corresponding elevation RMS errors vary from about 12 meters to 37 meters.

Rhode, F. W.↗

Evidence for X-ray emission from Kepler's supernova remnant

Evidence for weak soft X-ray emission from the remnant of Kepler's supernova has been acquired by the low energy detectors of the A 2 experiment on HEAO 1. A soft X-ray source has been detected using a narrow field of view sensitive to X rays between 0.2 and 3 keV and is found to be the only constant X-ray source within the error box containing Kepler's supernova remnant. The intensity of the X-ray source is calculated to be about 6.3 x 10 to the -2 counts/sq cm sec, with an intrinsic X-ray luminosity in the energy range 0.3 to 3 keV of about 28 x 10 to the 35 erg/sec if, as is widely believed, the remnant is at a distance of 4 kpc. Observations from HEAO 2 will allow the detection to be confirmed, the source to be imaged and its spectrum to be determined.

Tuohy, I. R.↗

Optical studies of the regions of the gamma-ray bursts of 19 November, 1978 and 5 March, 1979

Optical studies were made of two well-located gamma-ray burst regions in the Southern Hemisphere using the 1.5 m telescope at the Cerro Tololo Inter-American Observatory in Chile. Multi-filter image tube plates and UBV photometry surveys were made of both regions. The field of the 19 November, 1978 gamma-ray burst shows no early star or star with unusual colors out to several diameters of the nominal error box. The region of the 5 March, 1979 gamma-ray burst, which includes N49, contains several blue giants in the LMC, two of which deserve further study.

Fishman, G. J.↗

A mechanistic model of Eulerian, Lagrangian mean, and Lagrangian ozone transport by steady planetary waves

Ozone transport is calculated for steady, dissipative planetary waves using the Eulerian, Lagrangian mean, and residual circulation. A Lagrangian model of parcel dynamics is used to interpret planetary wave-photochemistry interaction. In chemically active regions the mean field ozone changes are found to be significant only where there are large gradients in chemical sources and sinks along parcel trajectories. The largest changes in the mean field are found in the lower stratosphere and are due to the Lagrangian mean advection. When the Lagrangian mean advection is approximated by the residual circulation, errors in the transport velocities as large as 30 pct may occur.

Rood, R. B.↗

Evaluation of concepts and methods for extraction of flow parameters from laser transit anemometry data

A Monte-Carlo type simulation system was developed to test concepts and associated algorithms proposed by Mayo and Smart (1984) for the extraction of two-dimensional flow parameters from laser transit anemometry data sets. The Monte-Carlo LTA simulation program models a flow field as well as the sample volume geometry of the LTA system, thereby permitting simulation of two-dimensional data acquisition in a three-dimensional flow field. The results of these tests on the proposed processing concepts suggest that the instrument is capable of measuring mean velocities to less than +0.15 percent error and flow angles to less then +0.3 percent for turbulence intensities of up to 15.0 percent.

Humphreys, W. M., Jr.↗

Types and Characteristics of Data for Geomagnetic Field Modeling

Given here is material submitted at a symposium convened on Friday, August 23, 1991, at the General Assembly of the International Union of Geodesy and Geophysics (IUGG) held in Vienna, Austria. Models of the geomagnetic field are only as good as the data upon which they are based, and depend upon correct understanding of data characteristics such as accuracy, correlations, systematic errors, and general statistical properties. This symposium was intended to expose and illuminate these data characteristics.

R A Langel↗

Effects of isotope selection on solution convergence in HZE transport

A fragmenting iron ion produces hundreds of isotopes during nuclear reactions. These isotopes are represented in the solution of the transport problem. A reduced set of isotopes is selected to minimize the computational burden but introduces error in the final result. A minimum list of 122 isotopes is required for adequate representation of the mass and charge distributions of the secondary radiation fields. A reduced set of 80 isotopes is sufficient to represent the charge distribution alone and represents reasonably well the linear energy transfer properties of the iron beam. Because iron fragmentation produces nearly every isotope lighter than iron, the resulting 122-isotope list should be adequate for ion beams with charges equal to or less than 26.

Kim, Myung-Hee Y.↗

Simulation of wave propagation in three-dimensional random media

Quantitative error analysis for simulation of wave propagation in three dimensional random media assuming narrow angular scattering are presented for the plane wave and spherical wave geometry. This includes the errors resulting from finite grid size, finite simulation dimensions, and the separation of the two-dimensional screens along the propagation direction. Simple error scalings are determined for power-law spectra of the random refractive index of the media. The effects of a finite inner scale are also considered. The spatial spectra of the intensity errors are calculated and compared to the spatial spectra of intensity. The numerical requirements for a simulation of given accuracy are determined for realizations of the field. The numerical requirements for accurate estimation of higher moments of the field are less stringent.

Coles, William A.↗

Ocean observations with EOS/MODIS: Algorithm development and post launch studies

An investigation of the influence of stratospheric aerosol on the performance of the atmospheric correction algorithm was carried out. The results indicate how the performance of the algorithm is degraded if the stratospheric aerosol is ignored. Use of the MODIS 1380 nm band to effect a correction for stratospheric aerosols was also studied. The development of a multi-layer Monte Carlo radiative transfer code that includes polarization by molecular and aerosol scattering and wind-induced sea surface roughness has been completed. Comparison tests with an existing two-layer successive order of scattering code suggests that both codes are capable of producing top-of-atmosphere radiances with errors usually less than 0.1 percent. An initial set of simulations to study the effects of ignoring the polarization of the the ocean-atmosphere light field, in both the development of the atmospheric correction algorithm and the generation of the lookup tables used for operation of the algorithm, have been completed. An algorithm was developed that can be used to invert the radiance exiting the top and bottom of the atmosphere to yield the columnar optical properties of the atmospheric aerosol under clear sky conditions over the ocean, for aerosol optical thicknesses as large as 2. The algorithm is capable of retrievals with such large optical thicknesses because all significant orders of multiple scattering are included.

Gordon, Howard R.↗

An Algebraic Multigrid Solver for Navier-Stokes Problems in the Discrete Second-Order Approximation

An algebraic multigrid scheme is presented for solving the discrete Navier-Stokes equations to second-order accuracy using the defect-correction method. Solutions have been obtained for problems involving both structured and unstructured meshes, with the resolution and resolution grading controlled by global and local mesh refinements. The solver is efficient and robust to the extent that no underrelaxation of variables has been required to ensure convergence, but rates of convergence can be improved with small amounts of underrelaxation of the velocity-pressure coupling. Provided that the computational mesh can resolve the flow field, convergence characteristics are almost mesh independent. Rates of convergence actually improve with refinement, asymptotically approaching mesh independent values. For extremely coarse meshes where dispersive truncation errors would be expected to prevent convergence (or even induce divergence), solutions can still be obtained by using explicit underrelaxation in the iterative cycle.

Webster, R.↗

Reduction of PMT Signal-Induced Noise in Lidar Receivers

Signal-induced noise is generated when a photomultiplier tube (PMT) is subjected to an intense light pulse. The PMT signal does not return to the dark current level after the signal is removed, but decays slowly (i.e., signal-induced noise). This is of practical significance for DIAL (Differential Absorption lidar) measurements where signal-induced noise decays are superimposed on the on-line (absorption) and off-line signals. Errors in the ozone density calculation result for stratosphere measurements. Other researchers have implemented mechanical choppers that block the intense pulse which may be from near field return scattering or scattering from a cloud. This configuration cannot be implemented for the DIAL system employed for aircraft measurements since the on-line and off-line pulses are 300 microseconds apart. A scheme has been developed in this study to electronically attenuate the signal induced noise. A ring electrode, external to the PMT photocathode, is utilized to perturb the electron trajectories between the photocathode and the first dynode. This effect has been used for position sensitive PMTs and suggested for gating PMTS.

Williamson, Cynthia K.↗

Measurement of Geopotential Heights by GPS Radio Occultation

Geopotential heights of constant pressure surfaces are retrieved from global positioning system (GPS) radio occultation data. In order to assess accuracy a subset of data obtained by GPS/MET during spring 1995 and summer 1995 are compared to the output of the European Centre for Medium-Range Weather Forecasts (ECMWF) global model. The root-mean-square measurement error is 20 m throughout the upper troposphere and lower stratosphere. Furthermore, the ECMWF global model contains enhanced errors in the southeast Pacific. In probing the data for potential utility in climate studies, a Bayesian interpolation technique is used to map the geopotential height fields in the upper troposphere during the summer. Despite limitations of the GPS/MET data set the global average 300-mbar geopotential height over a 2-week period in summer 1995 is determined with an accuracy of 7 m. By obtaining greater coverage and partially resolving synoptic variability, a future constellation of 16 orbiting receivers could obtain global average geopotential height estimates in the upper troposphere with an accuracy of 1 m each day. Accuracy would be somewhat worse for regional studies, except in the tropics where synoptic variability is depressed.

Leroy, Stephen S.↗

A XMM Survey for Compact Objects in Supernova Remnants

The goal of the project is to identify candidate neutron stars in Galactic supernova remnants (SNRs) through their X-ray emission. With XMM we observed the SNRs and typically find 10 - 50 X-ray sources. Almost all are either background galaxies or foreground stars. Therefore we must also pursue detailed optical/infrared follow-up observations to find counterparts for these X-ray sources and classify them. At the depth of the XMM observations, practically all confusing X-ray sources should have identifiable optical/IR counterparts. We have done a preliminary analysis of the XMM data and identified likely counterparts to the X-ray sources from available surveys(DSS, 2MASS). We then obtained wide-field optical/IR data from Palomar to get counterparts for the remaining sources. This analysis is underway: while often a single bright source is in the XMM error circle and can be considered a counterpart, in a number of cases we must do more detailed studies and evaluate several fainter optical/lR sources. We hope to have the final analysis of the XMM + Palomar data done this Fall. It is possible that additional, deeper optical/IR data may be necessary. We expect to publish our results by the end of this year.

Kulkarni, Shrinivas R.↗

SpaceCube Demonstration Platform

A document discusses how the HST SM4 SpaceCube flight spare was modified to create an experiment called the Space- Cube Demonstration Platform (SC DP) for use on the MISSE7 Space Station payload (in collaboration with NRL). It is designed to serve as an on-orbit platform for demonstrating advanced fault tolerance technologies. A simple C&DH (command and data handling) system was developed for the Virtex4 FPGAs (field programmable gate arrays). Both Virtex4s on each SpaceCube run the same program, and both receive incoming telemetry. The rad-hard service FPGA performs simple error checking to verify that the incoming telemetry is valid. The SpaceCube framework was modified to allow for new program files to be sent from the ground, to be stored on the SpaceCube, and to be executed through ground commands. Each SpaceCube Virtex4 FPGA has resources set aside for experiments that are functionally isolated from the C&DH system. The experiments communicate to the C&DH system through a set of dual port memories, and this area is where the fault-tolerance experiments are executed. With the use of Xilinx commercial Virtex4 FX60 FPGAs, the fault tolerant framework allows the system to recover from radiation upsets that occur in the rad-soft parts (Virtex4 FPGA logic, embedded PPCs in Virtex4 FPGAs, SDRAM and Flash), the C&DH system that runs simultaneously on both Virtex4 FPGAs that uses a robust telemetry packet structure, checksums, and the rad-hard service FPGA to validate incoming telemetry. The ability to be reconfigured from the ground while in orbit is a novel benefit, as well as is the onboard compression capabilities that allow compressed files from the ground to be uploaded to the SpaceCube.

Espinosa, Daniel↗