Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Elasticity and yielding of mesophases of block copolymers in water–oil mixtures

Here, amphiphilic block copolymers self-assemble at the water/oil interface to form different mesomorphic structures, such as lamellar, micellar cubic, normal hexagonal, and reverse hexagonal structures. Usually, these structures are polycrystalline and the value of their elastic modulus depends on the average orientation of their constituent's single crystals. We introduce a model to predict the elastic modulus and yielding of mesophases from their characteristic length and intermicellar interactions. Shear modulus of each structure is measured as a function of deformation (strain). Zero-shear modulus, G 0 , depends on the inverse of the intermicellar distance with a power law model. The power law index for each structure is approximately n + 2 where n is the degree of confinement in the mesophase: 1 for lamellar, 2 for both normal and reverse hexagonal, and 3 for micellar cubic structures. Rheological properties of different mesophases of Pluronic P84 in the presence of water and p -xylene are used as a case study. The model is found to be in good agreement with experimental data in the linear viscoelastic region. When compared to experimental data, the yield strain value obtained from the model is one order of magnitude higher than the limit of the linear viscoelastic regime and close to the strain at the cross-over point of storage and loss moduli. Frequency sweep measurements are done to characterize the relaxation and cooperative model behaviors of each mesophase structure.

36 MATERIALS SCIENCE↗

The Princess Project: From Differential to Integral Experiments

Following the shutdown of the CEA Valduc experimental facilities, where, for more than 50 years, IRSN used to perform experiments related to criticality safety, IRSN initiated a new project named PRINCESS (PRoject for IRSN Neutron physics and Criticality Experimental data Supporting Safety). The objective is to continue collecting experimental data necessary for the IRSN missions in nuclear safety. For this purpose, collaborations with various national and international laboratories have been established. The PRINCESS project covers various nuclear physics fields from nuclear data to criticality-safety and reactor physics providing information to both differential and integral data improvements.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Model Development for Thermal-Hydrology Simulations of a Full-Scale Heater Experiment in Opalinus Clay

Disposal of commercial spent nuclear fuel in a geologic repository is studied. In situ heater experiments in underground research laboratories provide a realistic representation of subsurface behavior under disposal conditions. Here, this study describes process model development and modeling analysis for a full-scale heater experiment in opalinus clay host rock. The results of thermal-hydrology simulation, solving coupled nonisothermal multiphase flow, and comparison with experimental data are presented. The modeling results closely match the experimental data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Probing triaxiality beyond the proton drip line: Spectroscopy of Tm 147

Two triaxial states of the proton-decaying nucleus 147 Tm were studied via a comparison of experimental data to results obtained through nonadiabatic quasiparticle calculations. The experimental data were collected in a recoil-decay tagging study using the vacuum-mode recoil separator MARA coupled with the JUROGAM3 $\gamma$-ray spectrometer. The previously proposed level scheme above the triaxial 11/2 - (π⁢ℎ 11/2 ) ground state was confirmed, and the level structure was expanded to cover the states above the weakly populated proton-emitting 5/2 + (πd 5/2 ) isomeric state. Further, it was found that the isomeric state is also triaxial, and possibly more deformed than the ground state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NMR_DIFFSIM v. 1.0

The software generates and analyzes nuclear magnetic resonance spin diffusion simulations for the purpose of measuring domain sizes or spin diffusion constants in a heterogenous sample. Its primary capabilities are: 1. It solves the spin magnetization diffusion equation to simulate the results of a spin diffusion experiment using any structural input geometry, including structure models generated by molecular dynamics or other computational or experimental methods. 2. It compares the results of simulations on an input structure to experimental data, providing a data fitting algorithm to extract physical information from the experimental data via the simulation. 3. It can provide statistical measures to compare correlations between structural models, to determine domain clustering and connectedness, and to provide goodness-of-fit measures including chord length distributions, chi-squared values, Pearson coefficients and pair correlation functions. 4. It provides output reports, data files, and movies to visualize simulation results.

Sorte, Eric↗

Reduced-Order Modeling of Hydrogen Releases from Vent Stacks and with Wind Effects

Here, the physical release behavior of hydrogen is important to understand from a safety and design perspective. The consequences of unignited pressurized gaseous hydrogen plumes exiting vent stacks were considered by extending and modifying existing general hydrogen plume models. Entrainment, vent stack backpressure, and the flow regime of hydrogen exiting the vent were found to be significant factors affecting plume shape and size, but further investigation and validation with unchoked, low-Froude-number flows is recommended to improve the model’s robustness. Additionally, models for the effects of wind on unignited plume momentum and entrainment were added to explore this behavior. Wind was assumed to increase mixing of hydrogen with the ambient air, and to affect the momentum of the released jet. Introducing wind into the plume model led to a shorter plume for all wind and jet directions. A high counter-flowing wind led to non-physical results and challenges in interpreting the visualization. The proposed jet plume wind sub-models (specifically entrainment coefficients) were fit and compared to experimental data of different releases of hydrogen into a wind tunnel, but the quantity of data available and experimental conditions were limited. Thus, collection of more empirical data and for a wider range of conditions is recommended for improvement of the proposed computational models. Developing reduced-order models for these physical phenomena can improve accessibility to predicted physical behavior and the rate at which hydrogen systems can be safely designed and deployed.

entrainment↗

A propagation effects handbook for satellite systems design. A summary of propagation impairments on 10-100 GHz satellite links, with techniques for system design

This handbook provides satellite system engineers with a concise summary of the major propagation effects experienced on Earth-space paths in the 10 to 100 GHz frequency range. The dominant effect, attenuation due to rain, is dealt with in terms of both experimental data from measurements made in the U.S. and Canada, and the mathematical and conceptual models devised to explain the data. Rain systems, rain and attenuation models, depolarization and experimental data are described. The design techniques recommended for predicting propagation effects in Earth-space communications systems are presented. The questions of where in the system design process the effects of propagation should be considered, and what precautions should be taken when applying the propagation results are addressed in order to bridge the gap between the propagation research data and the classical link budget analysis of Earth-space communications system.

Kaul, R.↗

The astronaut science advisor: Ground testing during SLS-1

The objective of the Astronaut Science Advisor (ASA) is the improvement of the scientific return of experiments performed in space. This is accomplished through the use of expert systems technology to encode the domain and experiment knowledge commanded by the principal investigator (PI) and make it available to the astronaut experimenters. The principal functions of the ASA include the following: capture, reduce, and archive experimental data; monitor data quality and help diagnose problems with equipment when experimental data is erratic or poor; identify and permit investigation of interesting data; and suggest protocol changes that would result in better utilization of remaining time.

Compton, Michael M.↗

Validation Results for LEWICE 2.0

A research project is underway at NASA Lewis to produce a computer code which can accurately predict ice growth under any meteorological conditions for any aircraft surface. This report will present results from version 2.0 of this code, which is called LEWICE. This version differs from previous releases due to its robustness and its ability to reproduce results accurately for different spacing and time step criteria across computing platform. It also differs in the extensive amount of effort undertaken to compare the results in a quantified manner against the database of ice shapes which have been generated in the NASA Lewis Icing Research Tunnel (IRT). The results of the shape comparisons are analyzed to determine the range of meteorological conditions under which LEWICE 2.0 is within the experimental repeatability. This comparison shows that the average variation of LEWICE 2.0 from the experimental data is 7.2% while the overall variability of the experimental data is 2.5%.

Wright, William B.↗

Three-Dimensional Effects in Modeling of Dual-Mode Scramjets

A numerical investigation of an experimental dual-mode scramjet configuration is performed. Both experimental and numerical results indicate significant upstream interaction for this case. Several computational cases are examined: these include the use of jet-to-jet symmetry and entire half-duct modeling. Grid convergence, turbulence modeling, and wall temperature effects are studied in terms of wall pressure predictions and flow-field characteristics. Wall pressure comparisons between CFD and experiment show fair agreement for the jet-to-jet case. However, further computations of the entire half-duct show the development of a large sidewall separation zone extending much further upstream than the separation zone at the duct centerline. This sidewall separation is the dominant feature in the CFD-generated flowfield but is not evident in the experimental data, resulting in a unfavorable comparison between CFD and experimental data. Current work aimed at resolving this issue and at further understanding asymmetric flow-structures in dual-mode flow-fields is discussed.

Rodriguez, C. G.↗

Pion program for the future rare-decay experiments

The future investigations of rare decays of elementary particles demand the creation of new-generation setups which can perform much greater statistics and precise experimental data. The proposed new setups at CERN, NA62 (NA48/3 (P326SPS)), and at IHEP, OKA, are planned to obtain experimental data at the level of 10{sup -10}-10{sup -12} branching ratio. The main goals of both experimental programs are connected with the study of ultrarare kaon decays, but beams of these experiments contain 95% (NA48) and 50% (OKA) of pions. It is natural to use the pion part of these beams for study of rare pion decays. The pion program may be performed simultaneously or consecutively with the main tasks. Such problems as search for tensor interaction, measurements of branching ratio and form factors of some pion decays, effects of polarization, and search for new particles are included in this program.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nuclear Data Sheets for A=242

Here, detailed level schemes, decay schemes, band structure, and the experimental data on which they are based are presented for all nuclei with mass number A=242. The experimental data are evaluated and adopted values are given for level and radiation properties. For references on theory refer to the NSR file at the web site given below under Cutoff Date:. This evaluation replaces the A=242 publication by Y. A. Akovali in Nuclear Data Sheets 96, 177 (2002) (2002Ak06).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron-impact ionization excitation of helium in the quasiphoton regime

The triply differential cross section of ionization excitation of helium, leaving the residual ion in the n=2 excited states, is evaluated for the kinematics considered experimentally by Dupreet al. [J. Phys. B 25, 259 (1992)]. The interaction of the incident electron with the target is described at the first order, while the interaction of the ejected electron with the residual ion is treated very accurately within the formalism of the Jacobi matrix method. In the quasiphoton limit and for low ejected electron energies, the presence of series of doubly excited states, mainly below the n=3 single ionization threshold in helium, makes the triply differential cross sections extremely sensitive to both the energy and the emission angle of the ejected electron. We show that the convolution of our results with a Gaussian energy profile, in which the full width at half-maximum corresponds to the energy resolution in the experiment, has a significant effect. Our results suggest that it is also important to account for the finite resolution on the measurement of the scattering angle when the experimental data are compared to the theoretical predictions. Comparison of our theoretical results convoluted both in energy and in angle with the experimental data demonstrates the importance of an accurate description of the helium spectrum. A possible two-step mechanism involving single ionization of the target followed by excitation of the core electron is proposed to explain the remaining discrepancies.

74 ATOMIC AND MOLECULAR PHYSICS↗

Correction of instrumental distortion by analytical deconvolution of data

A general analytical theorem developed by van de Hulst (1946) for inverting the convolution integral is reviewed and illustrated both with synthetic data and with experimental data from time-of-flight measurements. If the undesired influence of an instrument used in an experimental measurement can be represented by the convolution integral, the original undistorted or true distribution may sometimes be recovered in postprocessing the data by means of deconvolution. Analytical deconvolution is achieved by using the coefficients from a power series representation of the distorted output distribution and a set of 'solving polynomials' which may be readily derived from the response function of the instrument.

Morton, D. C.↗

Navier-Stokes and Comprehensive Analysis Performance Predictions of the NREL Phase VI Experiment

A vortex lattice code, CAMRAD II, and a Reynolds-Averaged Navier-Stoke code, OVERFLOW-D2, were used to predict the aerodynamic performance of a two-bladed horizontal axis wind turbine. All computations were compared with experimental data that was collected at the NASA Ames Research Center 80- by 120-Foot Wind Tunnel. Computations were performed for both axial as well as yawed operating conditions. Various stall delay models and dynamics stall models were used by the CAMRAD II code. Comparisons between the experimental data and computed aerodynamic loads show that the OVERFLOW-D2 code can accurately predict the power and spanwise loading of a wind turbine rotor.

NREL (NATIONAL RENEWABLE ENERGY LABORATORY)↗

High-performance data format for scientific data storage and analysis

Here, in this article, we present the High-Performance Output (HiPO) data format developed at Jefferson Laboratory for storing and analyzing data from Nuclear Physics experiments. The format was designed to efficiently store large amounts of experimental data, utilizing modern fast compression algorithms. The purpose of this development was to provide organized data in the output, facilitating access to relevant information within the large data files. The HiPO data format has features that are suited for storing raw detector data, reconstruction data, and the final physics analysis data efficiently, eliminating the need to do data conversions through the lifecycle of experimental data. The HiPO data format is implemented in C++ and JAVA, and provides bindings to FORTRAN, Python, and Julia, providing users with the choice of data analysis frameworks to use. In this paper, we will present the general design and functionalities of the HiPO library and compare the performance of the library with more established data formats used in data analysis in High Energy and Nuclear Physics (such as ROOT and Parquete). In columnar data analysis, HiPO surpasses established data formats in performance and can be effectively applied to data analysis in other scientific fields.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improving Predictive Capability in REHEDS Simulations with Fast, Accurate, and Consistent Non-Equilibrium Material Properties

Predictive design of REHEDS experiments with radiation-hydrodynamic simulations requires knowledge of material properties (e.g. equations of state (EOS), transport coefficients, and radiation physics). Interpreting experimental results requires accurate models of diagnostic observables (e.g. detailed emission, absorption, and scattering spectra). In conditions of Local Thermodynamic Equilibrium (LTE), these material properties and observables can be pre-computed with relatively high accuracy and subsequently tabulated on simple temperature-density grids for fast look-up by simulations. When radiation and electron temperatures fall out of equilibrium, however, non-LTE effects can profoundly change material properties and diagnostic signatures. Accurately and efficiently incorporating these non-LTE effects has been a longstanding challenge for simulations. At present, most simulations include non-LTE effects by invoking highly simplified inline models. These inline non-LTE models are both much slower than table look-up and significantly less accurate than the detailed models used to populate LTE tables and diagnose experimental data through post-processing or inversion. Because inline non-LTE models are slow, designers avoid them whenever possible, which leads to known inaccuracies from using tabular LTE. Because inline models are simple, they are inconsistent with tabular data from detailed models, leading to ill-known inaccuracies, and they cannot generate detailed synthetic diagnostics suitable for direct comparisons with experimental data. This project addresses the challenge of generating and utilizing efficient, accurate, and consistent non-equilibrium material data along three complementary but relatively independent research lines. First, we have developed a relatively fast and accurate non-LTE average-atom model based on density functional theory (DFT) that provides a complete set of EOS, transport, and radiative data, and have rigorously tested it against more sophisticated first-principles multi-atom DFT models, including time-dependent DFT. Next, we have developed a tabular scheme and interpolation methods that compactly capture non-LTE effects for use in simulations and have implemented these tables in the GORGON magneto-hydrodynamic (MHD) code. Finally, we have developed post-processing tools that use detailed tabulated non-LTE data to directly predict experimental observables from simulation output.

36 MATERIALS SCIENCE↗

Recommended nuclear data for medical radioisotope production: diagnostic positron emitters

An IAEA coordinated research project that began in 2012 and ended in 2016 was primarily dedicated to the compilation, evaluation and recommendation of cross-section data for the production of medical radionuclides. One significant part of this work focused on diagnostic positron emitters. These particular studies consist of 69 reactions for direct and indirect or generator production of 44 Sc( 44 Ti), 52 mMn( 52 Fe), 52 gMn, 55 Co, 61 Cu, 62 Cu( 62 Zn), 66 Ga, 68 Ga( 68 Ge), 72 As( 72 Se), 73 Se, 76 Br, 82 Rb( 82 Sr), 82 mRb, 86 Y, 89 Zr, 90 Nb, 94 mTc, 110 mIn( 110 Sn), 118 Sb( 118 Te), 120 I, 122 I( 122 Xe), 128 Cs( 128 Ba), and 140 Pr( 140 Nd) medical radionuclides. The resulting reference cross-section data were obtained from Padé fits to selected and corrected experimental data, and integral thick target yields were subsequently deduced. Uncertainties in the fitted results were estimated via a Padé least-squares method with the addition of a 4% assessed systematic uncertainty. Experimental data were also compared with theoretical predictions available from the TENDL-2015 and TENDL-2017 libraries.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗