Search NASA⌕ Search

SEARCH · Search NASA

Results for “fluence”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Survey Of CO{sub 2} Laser Ablation Propulsion With Polyoxymethylene Propellant

Polyoxymethylene (POM) has been widely studied as a laser propulsion propellant paired to CO{sub 2} laser radiation. POM is a good test case for studying ablation properties of polymer materials, and within limits, for study of general trends in laser ablation-induced impulse. Despite many studies, there is no general understanding of POM ablation that takes into account the ambient pressure, spot area, fluence, and effects from confinement and combustion. This paper reviews and synthesizes CO{sub 2} laser ablation propulsion research using POM targets. Necessary directions for future study are indicated to address incomplete regions of the various parameter spaces. Literature data is compared in terms of propulsion parameters such as momentum coupling coefficient and specific impulse, within a range of fluences from about 1-500 J/cm{sup 2}, ambient pressures from about 10{sup -2}-10{sup 5} Pa, and laser spot areas from about 0.01-10 cm{sup 2}.

42 ENGINEERING↗

Numerical study of the plasma wall-bias effect on the ion flux through acceleration grid hole

In the extraction of ion beams from a source plasma through a grid acceleration structure, one of the key improvement issues is the fluence of the ion flux. Theoretical research has usually been focused on the structure of the grid system and the distribution of the electrostatic voltages over the grid layers. In the present work, using a self-consistent computer simulation between the plasma source, sheath potential, and the grid system, the effect of the source-wall biasing on the fluence of the ion flux through a three-grid acceleration system has been examined. It is found that a strongly positive wall-biasing can significantly enhance the ion flux by improving the shape of the plasma sheath potential meniscus at the entrance to the grid hole structure.

43 PARTICLE ACCELERATORS↗

Damaged carbon nanotubes get healed by ion irradiation

Carbon nanotubes (CNTs) are being used for varied applications. It is therefore important to study their stability under extreme conditions of temperature and irradiation. In this work, we report the stability of CNTs [both single-wall CNTs (SWCNTs) and multiwalled CNTs (MWCNTs)] under irradiation of a carbon ion beam of energy 55 MeV. The irradiated samples were analyzed using Raman spectroscopy. The Raman results indicate the interesting phenomenon of healing or annealing of CNTs under ion beam irradiation. The annealing process appears to begin at the lowest value of fluences and persists for quite a good range of fluence values. As the irradiation dose increases ({approx_equal}1x10{sup 14} ions/cm{sup 2}) the MWCNTs begin to amorphize whereas the SWCNTs system continues to heal.

36 MATERIALS SCIENCE↗

A test cassette for x-ray-exposure experiments at the National Ignition Facility

We present the design and operation of a test cassette for exposure of samples to radiation environments at the National Ignition Facility. The cassette provides options for square and round samples and exposure areas; the cassette provides for multiple levels of filtration on a single sample, which allows dynamic range in experiments. The samples had normal lines of sight to the x-ray source in order to have uniform x-ray illumination. The incident x-radiation onto the samples was determined by the choice of filter thicknesses and materials. The samples were held at precise locations, accurate to within a few hundred microns, in the target chamber in order to have a known fluence incident. In the cassette, the samples were held in place in such a way that a minimal ''line contact'' allows them to have the maximal mechanical response to the x-ray load. We present postshot images of the debris found on films used for filters, and pre- and postexposure specimens.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation induced modification in nanoscale hardness of ZnO cone structures

In this paper, the effect of ion irradiation on nanoscale hardness of ZnO microcones is reported. The hardness of ZnO cones determined by nanoindentation using atomic force microscope initially increases from 4.7{+-}1.4 to 9.5{+-}1.6 GPa after irradiation with 1.2 MeV Ar{sup +8} ions at an ion fluence of 10{sup 15} ions cm{sup -2} and then decreases with increasing ion fluence. This change in mechanical hardness has been correlated with the residual stress of the sample revealed by Raman peak shift in the E{sub 2}(H) mode. These results show that the generally reported radiation-hard nature of ZnO depends critically on irradiation conditions, especially the irradiation temperature.

36 MATERIALS SCIENCE↗

Laser ablated zirconium plasma: A source of neutral zirconium

The authors report spectroscopic investigations of laser produced zirconium (Zr) plasma at moderate laser fluence. At low laser fluence the neutral zirconium species are observed to dominate over the higher species of zirconium. Laser induced fluorescence technique is used to study the velocity distribution of ground state neutral zirconium species. Two-dimensional time-resolved density distributions of ground state zirconium is mapped using planner laser induced fluorescence imaging and total ablated mass of neutral zirconium atoms is estimated. Temporal and spatial evolutions of electron density and temperature are discussed by measuring Stark broadened profile and ratio of intensity of emission lines, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Swift Heavy Ion Irradiation Effect On Nanometer Range W/Fe Multilayers

The present study reports the effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structure (MLS) having a bilayer composition of [W(30A)/Fe(20A)]{sub 10BL}. The MLS was irradiated by 120 MeV Au{sup 9+} ions up to fluence of 4x10{sup 13} ions/cm{sup 2}. Structural study of pristine and irradiated MLS reveals that intra-layer microstructure of Fe-layers in the MLS becomes nano-crystalline on irradiation. Magnetic studies show increase in coercivity at higher fluence which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolution Of Surface Topography On GaAs(100) And GaAs(111) At Normal And Oblique Incidence Of Ar{sup +}-Ions

Nanoscale surface structures emerging from medium energy (50-60 keV)Ar{sup +}-ion sputtering of p-type GaAs(100) and semi-insulating GaAs(111) substrates have been investigated. For normally incident 50 keV Ar{sup +}-ions of fluence 1x10{sup 17} ions/cm{sup 2} on GaAs(100) and GaAs(111) features in the form of nanoscale pits/holes without short range ordering are observed with densities 5.2x10{sup 9} /cm{sup 2} and 5.9x10{sup 9} /cm{sup 2}, respectively along with irregularly shaped patches of islands. For GaAs(111) on increasing the influence to 5x10{sup 17} /cm{sup 2} the pit density increases marginally to 6.2x10{sup 9} /cm{sup 2}. For 60 deg. off-normal incidence of 60 keV Ar.{sup +}-ions of fluence 2x10{sup 17} ions/cm{sup 2} on GaAs(100) microscale wavelike surface topography is observed. In all cases well-defined nanodots are absent on the surface.

36 MATERIALS SCIENCE↗

CO{sub 2} Laser Ablation Area Scaling And Redeposition On Flat Polyoxymethylene Targets

One of the remaining unknown subjects of laser propulsion involves whether special benefits or challenges exist for applying laser ablation propulsion to targets with particularly large or small spot areas. This subject is of high importance for a wide range of topics ranging from laser removal of space debris to micropropulsion for laser propulsion vehicles. Analysis is complex since different ablation phenomena are dominant between atmosphere and vacuum conditions. Progress has also been impeded by the difficulty of setting control parameters (particularly fluence) constant while the spot area is adjusted. It is also usually difficult for one group to address small- and large-area effects using a single high-power laser system. Recent collaborative experiments on laser ablation area scaling at several institutions, using 100-J class and 10-J class CO{sub 2} lasers, have advanced the understanding of laser propulsion area scaling. The spot area-dependence of laser propulsion parameters has been investigated over an area range covering approximately 0.05-50 cm{sup 2} at low fluence of about 0.6 J/cm{sup 2}. The experiments were conducted well below the threshold for plasma formation, and provide an estimate of the ablation threshold for CO{sub 2} laser ablation of POM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Update On CO{sub 2} Laser Ablation Of Polyoxymethylene At 101 kPa

Recent work has brought about a renewed interest in CO{sub 2} laser ablation studies of polyoxymethylene, due to its potential as a test target for enhancing modern understanding of the laser ablation process. In this paper, new results taken in air at atmosphere pressure are reported, including data measured at institutions in Germany and Japan, which increase the body of literature data on CO{sub 2} laser ablation of polyoxymethylene. The results are discussed in terms of aerospace parameters such as the momentum coupling coefficient and specific impulse, and are compared to a previous literature study. The threshold fluence is specified for ablation of polyoxymethylene by CO{sub 2} laser radiation. Fluences higher (and lower) than previously tested for CO{sub 2} laser ablation were studied herein, and record specific impulse values for CO{sub 2} laser ablation of flat polyoxymethylene are also reported here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Synthesis Of Noble Metal Nanoparticle Composite Glasses Using Low Energy Ion Beam Mixing

Carbon coated thin films of Cu or Au on fused silica glasses have been irradiated using 100 keV Ar{sup +} ions at different fluences ranging from 1x10{sup 13} to 1x10{sup 16} ion/cm{sup 2}. In this article, we explore a route to form noble metal nanoparticles in amorphous glass matrices without post irradiation annealing using low energy ion beam mixing where nuclear energy loss process is dominant. Optical and structural properties were studied using UV-Vis-NIR absorbance spectroscopy and Glancing angle X-ray Diffraction (GXRD). Results showed that Cu and Au nanoparticles are formed at higher fluence of 1x10{sup 16} ion/cm{sup 2} used in this work without annealing. The diameters of metal nanoparticles obtained from UV-Vis NIR and GXRD are in agreement.

36 MATERIALS SCIENCE↗

Defect engineering in GaAs using high energy light ion irradiation: Role of electronic energy loss

We report on the application of high energy light ions (Li and O) irradiation for modification of defects, in particular, for annihilation of point defects using electronic energy loss in GaAs to minimize the defects produced by nuclear collisions. The high resolution x-ray diffraction and micro-Raman spectroscopy have been used to monitor that no lattice damage or amorphization take place due to irradiating ions. The effects of irradiation on defects and their energy levels have been studied using thermally stimulated current spectroscopy. It has been observed that till an optimum irradiation fluence of 10{sup 13} ions/cm{sup 2} there is annihilation of native defects but further increase in irradiation fluence results in accumulation of defects, which scales with the nuclear energy loss process, indicating that the rate of defects produced by the binary collision process exceeds rate of defect annihilation. Defect annihilation due to electronic energy loss has been discussed on the basis of breaking of bonds and enhanced diffusivity of ionized native defects.

36 MATERIALS SCIENCE↗

Correlation between structure and electrical transport in ion-irradiated graphene grown on Cu foils

Graphene grown by chemical vapor deposition and supported on SiO{sub 2} and sapphire substrates was studied following the controlled introduction of defects induced by 35 keV carbon ion irradiation. Changes in Raman spectra for fluences ranging from 10{sup 12} to 10{sup 15} cm{sup -2} indicate that the structure of graphene evolves from a highly ordered layer, to a patchwork of disordered domains, to an essentially amorphous film. These structural changes result in a dramatic decrease in the Hall mobility by orders of magnitude while, remarkably, the Hall concentration remains almost unchanged, suggesting that the Fermi level is pinned at a hole concentration near 1x10{sup 13} cm{sup -2}. A model for scattering by resonant scatterers is in good agreement with mobility measurements up to an ion fluence of 1x10{sup 14} cm{sup -2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of surface damage on organic materials irradiated with Ar cluster ion beam

The sputtering yields of organic materials under large cluster ion bombardment are much higher than those under conventional monomer ion bombardment. The sputtering rate of arginine remains constant with fluence for an Ar cluster ion beam, but decreases with fluence for Ar monomer. Additionally, because Ar cluster etching induces little damage, Ar cluster ion can be used to achieve molecular depth profiling of organic materials. In this study, we evaluated the damage to poly methyl methacrylate (PMMA) and arginine samples irradiated with Ar atomic and Ar cluster ion beams. Arginine samples were analyzed by secondary ion mass spectrometry (SIMS) and PMMA samples were analyzed by X-ray photoelectron spectroscopy (XPS). The chemical structure of organic materials remained unchanged after Ar cluster irradiation, but was seriously damaged. These results indicated that bombardment with Ar cluster ions induced less surface damage than bombardment with Ar atomic ion. The damage layer thickness with 5 keV Ar cluster ion bombardment was less than 1 nm.

36 MATERIALS SCIENCE↗

Magnetic stability of He{sup +} ion irradiated FeO+Fe{sub 3}N granular films

Ion irradiation effects on the magnetic properties of FeO+Fe{sub 3}N (iron oxide/iron nitride) granular films are investigated in this study. The FeO+Fe{sub 3}N granular films were prepared using a nanocluster deposition system. The x-ray diffraction data confirm the presence of FeO and Fe{sub 3}N compounds in the prepared granular films. The saturation magnetization (30 emu/g), coercivity (87.9 Oe), and remanence (3.2 emu/g) of these granular films remain unaltered after irradiation with 2 MeV He{sup +} ions to a fluence of 3 x 10{sup 15} ions/cm{sup 2} at room temperature, indicating that the magnetic properties of these granular films are not affected in a highly radioactive environment. This unique property of the magnetic stability may provide promising applications for advanced data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of local electrical conductivities in SiC by femtosecond laser modification

Enhancement of local electric conductivities induced by femtosecond laser modification in silicon carbide was studied. Current-voltage (I-V) characteristics of the laser-modified regions were measured between the ion-implanted metal contacts. Interestingly, the resistance sharply decreased in the fluence range from 5.0 to 6.7 J/cm{sup 2}. The resistance at the irradiation fluence of 53 J/cm{sup 2} decreased by more than six orders of magnitude compared with the nonirradiated one. From the I-V characteristics and the scanning electron microscope observations, we conclude that the phase separation associate with the formation of classical laser induced periodic structure causes the drastic increase in electric conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma confinement by hemispherical cavity in laser-induced breakdown spectroscopy

An aluminum hemispherical cavity (diameter: 11.1 mm) was used to confine plasmas produced by a KrF excimer laser in air from a steel target with a low concentration manganese in laser-induced breakdown spectroscopy. A significant enhancement (factor >12) in the emission intensity of Mn lines was observed at a laser fluence of 7.8 J/cm{sup 2} when the plasma was confined by the hemispherical cavity, leading to an increase in plasma temperature about 3600 K. The maximum emission enhancement increased with increasing laser fluence. The spatial confinement mechanism was discussed using shock wave theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterizing plasma mirrors near breakdown

Experiments dedicated to the characterization of plasma mirrors with a high energy, single shot short-pulse laser were performed at the 100 TW target area of the Z-Backlighter Facility at Sandia National Laboratories. A suite of beam diagnostics was used to characterize a high energy laser pulse with a large aperture through focus imaging setup. By varying the fluence on the plasma mirror around the plasma ignition threshold, critical performance parameters were determined and a more detailed understanding of the way in which a plasma mirror works could be deduced. It was found, that very subtle variations in the laser near field profile will have strong effects on the reflected pulse if the maximum fluence on the plasma mirror approaches the plasma ignition threshold.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗