Search NASA⌕ Search

SEARCH · Search NASA

Results for “frequency range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Wall-Modeled Large-Eddy Simulations of Jet Noise in Flight Conditions

A campaign of wall-modeled large-eddy simulations (WMLES) using structured curvilinear overlapping grids has been performed with the Launch Ascent and Vehicle Aerodynamics (LAVA) computational fluid dynamics (CFD) software to predict jet noise for single-stream axisymmetric round jets. The simulations address the new Prediction Uncertainty Reduction (PUR) technical challenge within the context of NASA’s Commercial Supersonic Technology (CST) project. The focus of this effort is to generate a simulation database for single-stream axisymmetric round nozzles at several operating points both for static (no ambient co-flow), and in-flight (M ͚ =0.3 co-flow) conditions. The operating conditions range in jet exit Mach number from 0.38 to 1.1 with nozzle temperature ratios (NTR) from 0.84 to 2.7. The effect of the flight-stream on far-field noise sound spectra is assessed. Comparison of LES predictions to microphone array measurements demonstrate good agreement within the resolved frequency range. A dip in the predicted low frequency noise spectra for observers between 120° and 145° is observed. This dip is smaller for lower Mach numbers and seems to be correlated to the Mach wave radiation angle. The Mach 1.1 jet shows broadband-shock associated noise. While the onset of BBSN appears to be captured correctly in WMLES, some differences in its magnitude and the prominent frequency at which it occurs persist between the experiment and the simulations. The effect of the outer nozzle boundary layer state created by the co-flow is assessed and shows to be important for accurate comparisons with experiments. A change of 2.5dB between a slip-wall condition and a artificially thickened turbulent boundary layer was observed. In addition, simulations were performed with an alternative nozzle geometry that includes a internal plug and has twice the nozzle exit diameter. These two configurations resulted in very comparable spectra which is consistent with experimental observations. A generally stronger deviation from experimental results is observed for in-flight cases compared to static conditions. The applicability and correct usage of acoustic analogies used for far-field propagation with strong turbulent co-flows needs to be investigated more systematically using canonical problems to improve comparisons between experiments and WMLES. This is especially true for coherent noise sources seen in BBSN.

CST↗

Dielectric relaxation in complex perovskite oxide In(Ni{sub 1/2}Zr{sub 1/2})O{sub 3}

The dielectric study of indium nickel zirconate, In(Ni{sub 1/2}Zr{sub 1/2})O{sub 3} (INZ) synthesized by solid state reaction technique is performed in a frequency range from 500 Hz to 1 MHz and in a temperature range from 303 to 493 K. The X-ray diffraction analysis shows that the compound is monoclinic. A relaxation is observed in the entire temperature range as a gradual decrease in {epsilon}'({omega}) and as a broad peak in {epsilon}''({omega}) in the frequency dependent real and imaginary parts of dielectric constant, respectively. The frequency dependent electrical data are analyzed in the framework of conductivity and electric modulus formalisms. The frequencies corresponding to the maxima of the imaginary electric modulus at various temperatures are found to obey an Arrhenius law with activation energy of 0.66 eV. The Cole-Cole model is used to study the dielectric relaxation of INZ. The scaling behaviour of imaginary part of electric modulus suggests that the relaxation describes the same mechanism at various temperatures. The frequency dependent conductivity spectra follow the universal power law.

36 MATERIALS SCIENCE↗

Large-Area Growth of Turbostratic Graphene on Ni(111) via Physical Vapor Deposition

Single-layer graphene has demonstrated remarkable electronic properties that are strongly influenced by interfacial bonding and break down for the lowest energy configuration of stacked graphene layers (AB Bernal). Multilayer graphene with relative rotations between carbon layers, known as turbostratic graphene, can effectively decouple the electronic states of adjacent layers, preserving properties similar to that of SLG. While the growth of AB Bernal graphene through chemical vapor deposition has been widely reported, we investigate the growth of turbostratic graphene on heteroepitaxial Ni(111) thin films utilizing physical vapor deposition. By varying the carbon deposition temperature between 800–1100°C, we report an increase in the graphene quality concomitant with a transition in the size of uniform thickness graphene, ranging from nanocrystallites to thousands of square microns. Combination Raman modes of as-grown graphene within the frequency range of 1650 cm ₋1 to 2300 cm ₋1 , along with features of the Raman 2D mode, were employed as signatures of turbostratic graphene. Bilayer and multilayer graphene were directly identified from areas that exhibited Raman characteristics of turbostratic graphene using high-resolution TEM imaging. Lastly, Raman maps of the pertinent modes reveal large regions of turbostratic graphene on Ni(111) thin films at a deposition temperature of 1100°C.

36 MATERIALS SCIENCE↗

In-situ coating of silicon-rich films on tokamak plasma-facing components with real-time Si material injection

Abstract Experiments have been conducted in the DIII-D tokamak to explore the in-situ growth of silicon-rich layers as a potential technique for real-time replenishment of surface coatings on plasma-facing components (PFCs) during steady-state long-pulse reactor operation. Silicon (Si) pellets of 1 mm diameter were injected into low- and high-confinement (L-mode and H-mode) plasma discharges with densities ranging from 3.9– 7.5 × 10 19 m −3 and input powers ranging from 5.5 to 9 MW. The small Si pellets were delivered with the impurity granule injector at frequencies ranging from 4 to 16 Hz corresponding to mass flow rates of 5–19 mg s −1 (1– 4.2 × 10 20 Si s −1 ) at cumulative amounts of up to 34 mg of Si per five-second discharge. Graphite samples were exposed to the scrape-off layer and private flux region plasmas through the divertor material evaluation system to evaluate the Si deposition on the divertor targets. The Si II emission at the sample correlates with silicon injection and suggests net surface Si-deposition in measurable amounts. Post-mortem analysis showed Si-rich coatings containing silicon oxides, of which SiO 2 is the dominant component. No evidence of SiC was found, which is attributed to low divertor surface temperatures. The in-situ and ex-situ analysis found that Si-rich coatings of at least 0.4–1.2 nm thickness have been deposited at 0.4–0.7 nm s −1 . The technique is estimated to coat a surface area of at least 0.94 m 2 on the outer divertor. These results demonstrate the potential of using real-time material injection to form Si-enriched layers on divertor PFCs during reactor operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

HYBRID {gamma} DORADUS-{delta} SCUTI PULSATORS: NEW INSIGHTS INTO THE PHYSICS OF THE OSCILLATIONS FROM KEPLER OBSERVATIONS

Observations of the pulsations of stars can be used to infer their interior structure and test theoretical models. The main-sequence {gamma} Doradus (Dor) and {delta} Scuti (Sct) stars with masses 1.2-2.5 M {sub sun} are particularly useful for these studies. The {gamma} Dor stars pulsate in high-order g-modes with periods of order 1 day, driven by convective blocking at the base of their envelope convection zone. The {delta} Sct stars pulsate in low-order g- and p-modes with periods of order 2 hr, driven by the {kappa} mechanism operating in the He II ionization zone. Theory predicts an overlap region in the Hertzsprung-Russell diagram between instability regions, where 'hybrid' stars pulsating in both types of modes should exist. The two types of modes with properties governed by different portions of the stellar interior provide complementary model constraints. Among the known {gamma} Dor and {delta} Sct stars, only four have been confirmed as hybrids. Now, analysis of combined Quarter 0 and Quarter 1 Kepler data for hundreds of variable stars shows that the frequency spectra are so rich that there are practically no pure {delta} Sct or {gamma} Dor pulsators, i.e., essentially all of the stars show frequencies in both the {delta} Sct and the {gamma} Dor frequency range. A new observational classification scheme is proposed that takes into account the amplitude as well as the frequency and is applied to categorize 234 stars as {delta} Sct, {gamma} Dor, {delta} Sct/{gamma} Dor or {gamma} Dor/{delta} Sct hybrids.

79 ASTRONOMY AND ASTROPHYSICS↗

Spectral and temporal properties of optical signals with multiple sinusoidal phase modulations

Optical signals generated by multiple sinusoidal temporal phase modulations (multi-FMs) applied to a monochromatic field are studied from the viewpoint of their optical spectrum and temporal modulations arising from spectral impairments. Statistical analysis based on the central limit theorem shows that the signals' optical spectrum converges to a normal distribution as the number of modulations increases, allowing one to predict the frequency range containing a given fraction of the total energy with the associated cumulative density function. The conversion of frequency modulation to amplitude modulation is analyzed and simulated for arbitrary multi-FM signals. These developments are of theoretical and practical importance for high-energy laser systems, where optical pulses are phase modulated in the front end to smooth out the on-target beam profile and prevent potentially catastrophic damage to optical components.

Dorrer, C.↗

Measuring terrestrial radio frequency interference at orbit altitudes

An experiment has been designed to measure and characterize the effect of man-made interference on satellite receivers at orbital altitudes. The experiment, as designed, requires dedicated hardware on a spacecraft of specified orbit and will measure (within the frequency range from 400 MHz to 12.4 GHz) peak levels of interference in cells dimensioned in space, time, and frequency. The experiment will provide data indicative of some of the statistical characteristics of interference levels at satellite orbital altitudes and will provide designers of satellite communications links with new facilities for the prediction and prevention of interference problems.

Bayol, M. E.↗

Fluctuating surface pressure measurements on USB wing using two types of transducers

Measurements of the fluctuating pressures on the wing surface of an upper-surface-blown powered-lift model and a JT15 engine were obtained using two types of pressure transducers. The pressures were measured using overall-fluctuating pressures and power spectral density analyses for various thrust settings and two jet impingement angles. Comparison of the data from the two transducers indicate that similar results are obtained in the lower frequency ranges for both transducers. The data also indicate that for this configuration, the highest pressure levels occur at frequencies below 2000 Hz.

Reed, J. B.↗

Mechanically scanned deployable antenna study

The conceptual design of a Mechanically Scanned Deployable Antenna which is launched by the STS (Space Shuttle) to provide radiometric brightness temperature maps of the Earth and oceans at selected frequency bands in the frequency range of 1.4 GHz to 11 GHz is presented. Unlike previous scanning radiometric systems, multiple radiometers for each frequency are required in order to fill in the resolution cells across the swath created by the 15 meter diameter spin stabilized system. This multiple beam radiometric system is sometimes designated as a ""whiskbroom'' system in that it combines the techniques of the scanning and ""pushbroom'' type systems. The definition of the feed system including possible feed elements and location, determination of the fundamental reflector feed offset geometry including offset angles and f/D ratio, preliminary estimates of the beam efficiency of the feed reflector system, a summary of reflector mesh losses at the proposed radiometric frequency bands, an overall conceptual configuration design and preliminary structural and thermal analyses are included.

Source record↗

An experimental study of surface pressure fluctuations in a separating turbulent boundary layer

Measurements of streamwise velocity fluctuation and surface pressure fluctuation spectra and wavespeeds are reported for a well-documented separating turbulent boundary layer. Because a portion of the acoustic pressure fluctuations is the same across the nominally two-dimensional turbulent flow, it is possible to decompose two microphone signals and obtain directly the turbulent flow contributions to the surface pressure spectra. The rms surface pressure fluctuation p' and spectra phi(omega) increase through the adverse pressure gradient attached flow region and the detached flow zone and scale on the maximum turbulent shearing stress tau(M); p'/tau(M) increases to the detachment location and decreases downstream due to the rapid movement of the pressure-fluctuation-producing motions away from the wall after the beginning of intermittent backflow. At lower frequencies for the attached flow phi(omega) is approximately omega to the -0.7 while phi(omega) is approximately omega to the -3 at higher frequencies. After the beginning of intermittent backflow, phi(omega) varies with omega at low frequencies and omega to the -3 at high frequencies; farther downstream the lower frequency range varies with omega to the 2.4. The surface pressure fluctuation celerity for the attached flow increases with frequency and agrees with the semi-logarithmic overlap equation of Panton and Linebarger. After the beginning of the separation process, the wavespeed decreases because of the oscillation of the instantaneous wavespeed direction and the streamwise coherence decreases drastically.

Simpson, Roger L.↗

The time-delay spectrum of GX 5-1 in its horizontal branch

Using a cross-spectral technique we investigate time delays between intensity variations of GX 5-1 in 10 X-ray spectral channels. The data were taken during a 1989 Ginga observation during which the source was in its horizontal-branch spectral state. We develope a new method to measure 'time-delay spectra' in fixed Fourier frequency ranges and use it to determine the energy and intensity dependence of time delays in the low-frequency noise (nu less than 2 Hz), the horizontal branch quasi-periodic oscillations (QPO), and the QPO second harmonic. These are the first time-delay spectra of a Z-source in its horizontal branch, and the first detection of time delays in the second harmonic. We consider two mechanisms for the production of the time lags: Comptonization and evolving shots. We perform Monte Carlo simulations of Compton scattering in a homogeneous, isotropic, central corona and show that it qualitatively explain the observed energy and time-delay spectra, but that it cannot explain the differences in the QPO first and second harmomnic time-delay spectra, nor the observed dependence of the QPO fractional rms variability upon energy. We consider implications of our results for millisecond pulsar searches in low-mass X-ray binaries.

Vaughan, B.↗

The laboratory spectrum of acetaldehyde at 1 millimeter (230-325 GHz)

The rotational spectrum of acetaldehyde (CH3CHO) in the frequency range 230-325 GHz has been measured in the laboratory using millimeter/submillimeter direct absorption spectroscopy. Over 250 transition frequencies are presented for this molecule for both A and E symmetry species in its ground (upsilon(sub t) = 0) and first excited (upsilon(sub t) = 1) torsional state, with experimental uncertainties of +/- 50 kHz. The data were fitted with a model involving an internal rotation potential function, which typically reproduces the measured frequencies to nu(sub obs) - nu(sub calc) less than or approximately 50 kHz for both ground and upsilon(sub t) = 1 state. These newly measured rest frequencies should aid in the identification of interstellar CH3CHO and in spectral line assignments for millimeter-band scans.

Barclay, W. L., Jr.↗

Interstellar PAH Emission in the 11-14 micron Region: New Insights and a Tracer of Ionized PAHs

The Ames infrared spectral database of isolated, neutral and ionized polycyclic aromatic hydrocarbons (PAHs) shows that aromatic CH out-of-plane bending frequencies are significantly shifted upon ionization. For non-adjacent and doubly-adjacent CH groups, the shift is pronounced and consistently toward higher frequencies. The non-adjacent modes are blueshifted by an average of 27 per cm and the doubly-adjacent modes by an average of 17 per cm. For triply- and quadruply-adjacent CH out-of-plane modes the ionization shifts are more erratic and typically more modest. As a result of these ionization shifts, both the non-adjacent and doubly-adjacent CH out-of-plane modes move out of the regions classically associated with their respective vibrations in neutral PAHs. The doubly-adjacent modes of ionized PAHs tend to fall into the frequency range traditionally associated with the non-adjacent modes, while the non-adjacent modes are shifted to frequencies above those normally attributed to out-of-plane bending vibrations. Consequently, the origin of the interstellar infrared emission feature near 11.2 microns, traditionally attributed to the out-of-plane bending of non-adjacent CH groups on PAHs is rendered ambiguous. Instead, this feature likely reflects contributions from both non-adjacent CH units in neutral PAHs and doubly-adjacent CH units in PAH cations, the dominant charge state in the most energetic emission regions. This greatly relieves the structural constraints placed on the interstellar PAH population by the dominance of the 11.2 micron band in this region and eliminates the necessity to invoke extensive dehydrogenation of the emitting species. Furthermore, these results indicate that the emission between 926 and 904 per cm (10.8 and 11.1 microns) observed in many sources can be unambiguously attributed to the non-adjacent CH out-of-plane bending modes of moderately-sized (fewer than 50 carbon atom) PAH cations making this emission an unequivocal tracer of ionized interstellar PAHs.

Hudgins, Douglas M.↗

Empirical Models of the Plasma Density in the Inner Magnetosphere

The radio plasma imager (RPI) on the IMAGE satellite performs radio sounding in the magnetosphere, transmitting coded signals stepping through the frequency range of interest and receiving the returned echoes. The measurements provide the echo amplitude as a function of frequency and echo delay time on a so-called plasmagram. A newly developed algorithm inverts THE echo traces on a plasmagram to electron density spatial distributions. Rased on these observed density distributions, an empirical model is constructed to describe the two-dimensional density distribution in the inner magnetosphere.

Huang, X.↗

UHF Microstrip Antenna Array for Synthetic- Aperture Radar

An ultra-high-frequency microstrippatch antenna has been built for use in airborne synthetic-aperture radar (SAR). The antenna design satisfies requirements specific to the GeoSAR program, which is dedicated to the development of a terrain-mapping SAR system that can provide information on geology, seismicity, vegetation, and other terrain-related topics. One of the requirements is for ultra-wide-band performance: the antenna must be capable of operating with dual linear polarization in the frequency range of 350 plus or minus 80 MHz, with a peak gain of 10 dB at the middle frequency of 350 MHz and a gain of at least 8 dB at the upper and lower ends (270 and 430 MHz) of the band. Another requirement is compactness: the antenna must fit in the wingtip pod of a Gulfstream II airplane. The antenna includes a linear array of microstrip-patch radiating elements supported over square cavities. Each patch is square (except for small corner cuts) and has a small square hole at its center.

Thomas, Robert F.↗

Pressure power spectra beneath a supersonic turbulent boundary layer.

Wind tunnel experiments up to Mach 3 have provided fluctuating wall-pressure spectra beneath a supersonic turbulent boundary layer to frequencies reaching 400 kHz by combining signals from piezoresistive silicon pressure transducers effective at low- and mid-range frequencies and piezoelectric quartz sensors to detect high frequency events. Data were corrected for spatial attenuation at high frequencies and for wind-tunnel noise and vibration at low frequencies. The resulting power spectra revealed the {omega}{sup -1} dependence for fluctuations within the logarithmic region of the boundary layer, but are essentially flat at low frequency and do not exhibit the theorized {omega}{sup 2} dependence. Variations in the Reynolds number or streamwise measurement location collapse to a single curve for each Mach number when normalized by outer flow variables. Normalization by inner flow variables is successful for the {omega}{sup -1} region but less so for lower frequencies. A comparison of the pressure fluctuation intensities with fifty years of historical data shows their reported magnitude chiefly is a function of the frequency response of the sensors. The present corrected data yield results in excess of the bulk of the historical data, but uncorrected data are consistent with lower magnitudes. These trends suggest that much of the historical compressible database may be biased low, leading to the failure of several semi-empirical predictive models to accurately represent the power spectra acquired during the present experiments.

33 ADVANCED PROPULSION SYSTEMS↗

Broadband/Wideband Magnetoelectric Response

A broadband/wideband magnetoelectric (ME) composite offers new opportunities for sensing wide ranges of both DC and AC magnetic fields. The broadband/wideband behavior is characterized by flat ME response over a given AC frequency range and DC magnetic bias. The structure proposed in this study operates in the longitudinal-transversal (L-T) mode. In this paper, we provide information on (i) how to design broadband/wideband ME sensors and (ii) how to control the magnitude of ME response over a desired frequency and DC bias regime. A systematic study was conducted to identify the factors affecting the broadband/wideband behavior by developing experimental models and validating them against the predictions made through finite element modeling. A working prototype of the sensor with flat bands for both DC and AC magnetic field conditions was successfully obtained. These results are quite promising for practical applications such as current probe, low-frequency magnetic field sensing, and ME energy harvester.

Park, Chee-Sung↗

Effect of the Chemical Composition of TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} (0 ≤ x ≤ 0.01) Crystals on Their Dielectric Characteristics and the Parameters of Localized States

The frequency dependences of the real (ε') and imaginary (ε'') parts of the complex dielectric permittivity, the dielectric loss tangent (tanδ), and the ac conductivity (σ{sub ac}) in the frequency range f = 5 × 10{sup 4}–3.5 × 10{sup 7} Hz have been studied in the TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} (0 ≤ x ≤ 0.01) crystals synthesized in this work. It is found that, in TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2}, the relaxation dispersions of ε' and ε'' take place. The effect of the erbium concentration (Er) in the TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} crystals on their dielectric coefficients has been studied. At high frequencies, the ac conductivity of the TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} crystals obeys the relationship σ{sub ac} ~ f {sup 0.8}, which is characteristic of the hopping mechanism of the charge transfer over states localized near the Fermi level. The parameters of the states localized in the forbidden band of TlIn{sub 1 –} {sub x}Er{sub x}S{sub 2} and the influence of the chemical composition of the crystals on these parameters are estimated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗