Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Understanding the High Solubility of CO2 in an Ionic Liquid with the Tetracyanoborate Anion

The ionic liquid 1-ethyl-3-methylimidazolium tetracyanoborate, [emim][B(CN){sub 4}], shows greater CO{sub 2} solubility than several popular ionic liquids (ILs) of different anions including [emim]bis(trifluoromethylsulfonyl)imide [emim][Tf{sub 2}N]. Herein, both classical molecular dynamics simulation and quantum mechanical calculations were used to understand the high solubility of CO{sub 2} in the [emim][B(CN){sub 4}] IL. We found that the solubility is dictated by the cation-anion interaction, while the CO{sub 2}-anion interaction plays a secondary role. The atom-atom radial distribution functions (RDFs) between cation and anion show weaker interaction in [emim][B(CN){sub 4}] than in [emim][Tf{sub 2}N]. A good correlation is observed between gas-phase cation-anion interaction energy with CO{sub 2} solubility at 1 bar and 298 K, suggesting that weaker cation-anion interaction leads to higher CO{sub 2} solubility. MD simulation of CO{sub 2} in the ILs showed that CO{sub 2} is closer to the anion than to the cation and that it interacts more strongly with [B(CN){sub 4}] than with [Tf{sub 2}N]. Moreover, a higher volume expansion is observed in [emim][B(CN){sub 4}] than in [emim][Tf{sub 2}N] at different mole fractions of CO{sub 2}. These results indicate that [B(CN){sub 4}] as a small and highly symmetric anion is unique in giving a high CO{sub 2} solubility by interacting weakly with the cation and thus allowing easy creation of cavity for close contact with CO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Full data acquisition in Kelvin Probe Force Microscopy: Mapping dynamic electric phenomena in real space

Kelvin probe force microscopy (KPFM) has provided deep insights into the role local electronic, ionic and electrochemical processes play on the global functionality of materials and devices, even down to the atomic scale. Conventional KPFM utilizes heterodyne detection and bias feedback to measure the contact potential difference (CPD) between tip and sample. This measurement paradigm, however, permits only partial recovery of the information encoded in bias- and time-dependent electrostatic interactions between the tip and sample and effectively down-samples the cantilever response to a single measurement of CPD per pixel. This level of detail is insufficient for electroactive materials, devices, or solid-liquid interfaces, where non-linear dielectrics are present or spurious electrostatic events are possible. Here, we simulate and experimentally validate a novel approach for spatially resolved KPFM capable of a full information transfer of the dynamic electric processes occurring between tip and sample. General acquisition mode, or G-Mode, adopts a big data approach utilising high speed detection, compression, and storage of the raw cantilever deflection signal in its entirety at high sampling rates (> 4 MHz), providing a permanent record of the tip trajectory. We develop a range of methodologies for analysing the resultant large multidimensional datasets involving classical, physics-based and information-based approaches. Physics-based analysis of G-Mode KPFM data recovers the parabolic bias dependence of the electrostatic force for each cycle of the excitation voltage, leading to a multidimensional dataset containing spatial and temporal dependence of the CPD and capacitance channels. We use multivariate statistical methods to reduce data volume and separate the complex multidimensional data sets into statistically significant components that can then be mapped onto separate physical mechanisms. Overall, G-Mode KPFM offers a new paradigm to study dynamic electric phenomena in electroactive interfaces as well as offer a promising approach to extend KPFM to solid-liquid interfaces.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Acetylene adsorption on δ-MoC(001), TiC(001) and ZrC(001) surfaces: A comprehensive periodic DFT study

A comprehensive study of acetylene adsorption on δ-MoC(001), TiC(001) and ZrC(001) surfaces was carried out by means of calculations based on periodic density functional theory, using the Perdew–Burke–Ernzerhof exchange–correlation functional. It was found that the bonding of acetylene was significantly affected by the electronic and structural properties of the carbide surfaces. The adsorbate interacted with metal and/or carbon sites of the carbide. The interaction of acetylene with the TiC(001) and ZrC(001) surfaces was strong (binding energies higher than $-$3.5 eV), while moderate acetylene adsorption energies were observed on δ-MoC(001) ($-$1.78 eV to –0.66 eV). Adsorption energies, charge density difference plots and Mulliken charges suggested that the binding of the hydrocarbon to the surface had both ionic and covalent contributions. According to the C–C bond lengths obtained, the adsorbed molecule was modified from acetylene-like into ethylene-like on the δ-MoC(001) surface (desired behavior for hydrogenation reactions) but into ethane-like on TiC(001) and ZrC(001). The obtained results suggest that the δ-MoC(001) surface is expected to have the best performance in selective hydrogenation reactions to convert alkynes into alkenes. Another advantage of δ-MoC(001) is that, after C 2 H 2 adsorption, surface carbon sites remain available, which are necessary for H 2 dissociation. Furthermore, these sites were occupied when C 2 H 2 was adsorbed on TiC(001) and ZrC(001), limiting their application in the hydrogenation of alkynes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Different interfacial reactivity of lithium metal chloride electrolytes with high voltage cathodes determines solid-state battery performance

A deep understanding of the interaction of the surface of cathode materials with solid electrolytes is crucial to design advanced solid-state batteries (SSBs). This is especially true for the new class of lithium metal chloride (Li-M-Cl) solid electrolytes which are receiving rapidly growing attention due to their very high oxidative stability (>4 V) in combination with good ionic conductivity that can enable long cell cycle life. While Li-M-Cl electrolytes typically contain resource-limited metals (M) such as indium or rare earths, work has focused on substituting M with more abundant elements such as zirconium. Via operando resistance measurements using intermittent current interruption we explore the dynamic evolution of the interphase at the surface of Ni-rich NCM85 or NCM111 cathode particles inside a working SSB with three different Li-(M 1 ,M 2 )-Cl catholytes (Li 3 InCl 6 , Li 2 Sc 1/3 In 1/3 Cl 4 and Li 5/2 Y 1/2 Zr 1/2 Cl 6 ) to reveal the impact of the cationic metal substitution on the interfacial chemistry. We show that the metal plays a critical role in determining high voltage stability, contrary to prior assumptions. Using a combination of cyclic voltammetry and ultraviolet photoelectron spectroscopy measurements of the electronic band structure to assess oxidative stability; coupled with DFT calculations and ToF-SIMS to evaluate products formed at the interface at different upper cutoff potentials and degrees of delithiation, we are able to differentiate between electrochemical and chemical degradation. We find that Li 2 Sc 1/3 In 1/3 Cl 4 yields the highest (and Li 3 InCl 6 the lowest) stability against electrochemical oxidation, while Li 5/2 Y 1/2 Zr 1/2 Cl 6 undergoes a detrimental chemical reaction with oxygen released from Ni-rich NCM85 at high potentials, resulting in fast capacity fading. Altogether, our work establishes a platform for the metrics and an approach that can be utilized to efficiently evaluate the stability of new halide SEs in SSB cells.

25 ENERGY STORAGE↗

Core-level positive-ion and negative-ion fragmentation of gaseous and condensed HCCl{sub 3} using synchrotron radiation

We investigated the dissociation dynamics of positive-ion and negative-ion fragments of gaseous and condensed HCCl{sub 3} following photoexcitation of Cl 2p electrons to various resonances. Based on ab initio calculations at levels HF/cc-pVTZ and QCISD/6-311G*, the first doublet structures in Cl L-edge x-ray absorption spectrum of HCCl{sub 3} are assigned to transitions from the Cl (2P{sub 3/2},{sub 1/2}) initial states to the 10a{sub 1}{sup *} orbitals. The Cl 2p{yields} 10a{sub 1}* excitation of HCCl{sub 3} induces a significant enhancement of the Cl{sup +} desorption yield in the condensed phase and a small increase in the HCCl{sup +} yield in the gaseous phase. Based on the resonant photoemission of condensed HCCl{sub 3}, excitations of Cl 2p electrons to valence orbitals decay predominantly via spectator Auger transitions. The kinetic energy distributions of Cl{sup +} ion via the Cl 2p{yields} 10a{sub 1}* excitation are shifted to higher energy {approx}0.2 eV and {approx}0.1 eV relative to those via the Cl 2p{yields} 10e{sup *} excitation and Cl 2p{yields} shape resonance excitation, respectively. The enhancement of the yields of ionic fragments at specific core-excited resonance states is assisted by a strongly repulsive surface that is directly related to the spectator electrons localized in the antibonding orbitals. The Cl{sup -} anion is significantly reinforced in the vicinity of Cl 2p ionization threshold of gaseous HCCl{sub 3}, mediated by photoelectron recapture through post-collision interaction.

36 MATERIALS SCIENCE↗

Coupling and Testing the Fate and Transport of Heavy Metals and Other Ionic Species in a Groundwater Setting at Oak Ridge, TN - 13498

Historical data show that heavy metals (including mercury) were released from Y -12 National Security Complex (NSC) at Oak Ridge, Tennessee, to the surrounding environments during its operation in 1950's. Studies have also shown that metals accumulated in the soil, rock, and groundwater, and are, at the present time, sources of contamination to nearby rivers and creeks (e.g., East Fork Poplar Creek, Bear Creek). For instance, mercury (Hg), zinc (Zn), cadmium (Cd) and lead (Pb) have been found and reported on the site groundwater. The groundwater type at the site is Ca-Mg-HCO{sub 3}. This paper presents a modeling application of PHREEQC, a model that simulates geochemical processes and couples them to flow and transport settings. The objective was to assess the capability of PHREEQC to simulate the transport of ionic species in groundwater at Oak Ridge, Tennessee; data were available from core holes and monitoring wells over a 736-m distance, within 60-300 m depths. First, predictions of the transport of major ionic species (i.e., Ca{sup 2+} and Mg{sup 2+}) in the water were made between monitoring wells and for GW-131. Second, the model was used to assess hypotheses under two scenarios of transport for Zn, Cd, Pb and Hg, in Ca-Mg-HCO{sub 3} water, as influenced by the following solid-liquid interactions: a) the role of ion exchange and b) the role of both ion exchange and sorption, the latter via surface complexation with Fe(OH){sub 3}. The transport scenario with ion exchange suggests that significant ion exchange is expected to occur for Zn, Cd and Pb concentrations, with no significant impact on Hg, within the first 100 m. Predictions match the expected values of the exchange coefficients relative to Ca{sup 2+} and Mg{sup 2+} (e.g., K{sub Ca/Zn} = K{sub Ca/Cd} > K{sub Ca/Pb} > K{sub Ca/Hg}). The scenario with both ion exchange and sorption does affect the concentrations of Zn and Cd to a small extent within the first 100 m, but does more meaningfully reduce the concentration of Pb, within the same distance, and also decreases the concentration of Hg in between core holes. Analysis of the above results, in the light of available literature on the ions of this study, does fundamentally support the capability of PHREEQC to predict the transport of major ions in a groundwater setting; it also generally supports the hypothesized role of ion exchange and sorption. The results indicate the potential of the model as a tool in the screening, selection and monitoring of remediation technologies for contaminated groundwater sites. (authors)

54 ENVIRONMENTAL SCIENCES↗

Electrons and Their Multiple Kinetic Fates in an Ionic Liquid

Ionic liquids (ILs) for electrochemical, nuclear, and solar energy applications operate under harsh conditions, where electrons and transient radical species can form. This communication discusses why anions such as bis(trifluoromethylsulfonyl)imide (Tf 2 N − ) are reduced at the electron-rich electrode whereas in laser photoionization or pulse radiolysis studies, where electrons are ejected from species in the bulk, we often detect long-lived electrons in cavities that interact with IL cations instead. This work argues that bulk excess electrons generated photolytically or radiolytically follow kinetically favored pathways. As such, cavity electrons may not be the most energetically favorable states, but when they form, and they do form, they are kinetically stable. Reduction reactions of anions or electron localization in cavities and subsequent reactions are all expected outcomes. Here we focus on a pyrrolidinium-based IL of the dicyanamide (N(CN) 2 − ) anion because of its large electrochemical window and very low viscosity, which are ideal for energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Durable Fluorinated High Oxygen Permeability Ionomers for Proton Exchange Membrane Fuel Cells

For proton exchange membrane fuel cells to be cost-competitive in light- and heavy-duty vehicle applications, their Pt content in the catalyst layers needs to be lowered. However, lowering the Pt content results in voltage losses due to high local oxygen transport resistances at the ionomer–Pt interface. It is therefore crucial to use ionomers that have higher oxygen permeability than Nafion. In this paper, novel high oxygen permeability ionomers (HOPIs) are presented, with up to five times higher oxygen permeability than Nafion, synthesized by copolymerization of perfluoro-2,2-dimethyl-1,3-dioxole (PDD) with perfluoro(4-methyl-3,6-dioxaoct-7-ene) sulfonyl fluoride (PFSVE). PDD is the source of higher permeability due to its open ring structure, while PFSVE provides ionic conductivity. Optimization of PDD content and equivalent weight enables increased fuel cell performance, mainly at high current densities, where HOPIs can achieve power densities >1.25 W cm -2 and exceed the 0.8 A cm -2 U.S. Department of Energy durability target by losing only 4.5 mV, which is over six times less than 30 mV. Finally, the interactions between HOPI and SO 3 - groups with a PtCo/C catalyst are also elucidated here at a fundamental level.

25 ENERGY STORAGE↗

Laponite® and Laponite®‐PEO hydrogels with enhanced elasticity in phosphate‐buffered saline

Hydrogels of the synthetic clay Laponite® and Laponite®‐poly (ethylene oxide) (PEO) have long been studied as model systems to understand fundamental aspects of colloidal disks and colloid‐polymer systems. More recently, these systems have been explored for a variety of biomedical applications. However, there is limited information in the literature on the fundamental properties of Laponite and Laponite‐polymer gels at pH < 9. Here, we report the rheological behavior of Laponite and Laponite‐PEO systems at biologically relevant conditions (e.g. physiological pH and ionic strength) and examine the effect of phosphate‐buffered saline on the properties of the gel. Our results show that the elastic modulus of both Laponite and Laponite‐PEO gels increases dramatically, in some cases by one order of magnitude or more, after immersing gels in phosphate‐buffered saline. This may be due to an enhanced edge–face interaction between particles in buffered solutions, which would promote a long‐lasting network structure of clay particles. These results are relevant to the design of clay‐polymer gels and nanocomposites hydrogels for biomaterials applications. Copyright © 2015 John Wiley & Sons, Ltd.

Liu, Xiao↗

Role of the Solvent–Surfactant Duality of Ionic Liquids in Directing Two-Dimensional Particle Assembly

Nanoparticle self-assembly plays a key role in formation of superlattices, which exhibit remarkable physical and chemical properties. However, controlling assembly remains a challenge partly due to a lack of understanding of the assembly dynamics and the difficulty in linking interfacial solution properties to interparticle forces. In this study, using liquid-cell transmission electron microscopy, self-assembly of gold nanoparticles (NPs) into superlattices in mixtures of water and ionic liquid (IL) was visualized, revealing a dual role of the IL in the assembly process. At intermediate concentrations, the IL acts as a surfactant stabilizing the particles at a well-defined equilibrium separation corresponding to the length of hydrogen bonded IL cations adsorbed onto neighboring NPs. Analysis of the interparticle forces reveals attractive long-range interactions of a van der Waals nature. At separations of 1-3 nm, interactions are dominated by attractive ion correlation and repulsive hydration forces giving rise to an energy minimum at 1.5 nm separation. The superlattice is further stabilized by hydrogen bonding, which shifts the equilibrium interparticle distance to 1.1 nm. In contrast, at higher concentrations, IL accumulates and forms a structured network in the gap between nanoparticles, where it acts as a solvent that eliminates the repulsive barrier and thus promotes particle coalescence. This solvent-surfactant duality of IL opens new opportunities for their use in directing particle assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced noise at high bias in atomic-scale Au break junctions

Heating in nanoscale systems driven out of equilibrium is of fundamental importance, has ramifications for technological applications, and is a challenge to characterize experimentally. Prior experiments using nanoscale junctions have largely focused on heating of ionic degrees of freedom, while heating of the electrons has been mostly neglected. We report measurements in atomic-scale Au break junctions, in which the bias-driven component of the current noise is used as a probe of the electronic distribution. At low biases (,150 mV) the noise is consistent with expectations of shot noise at a fixed electronic temperature. At higher biases, a nonlinear dependence of the noise power is observed. We consider candidate mechanisms for this increase, including flicker noise (due to ionic motion), heating of the bulk electrodes, nonequilibrium electron-phonon effects, and local heating of the electronic distribution impinging on the ballistic junction. We find that flicker noise and bulk heating are quantitatively unlikely to explain the observations. We discuss the implications of these observations for other nanoscale systems, and experimental tests to distinguish vibrational and electron interaction mechanisms for the enhanced noise.

ELECTRONIC AND SPINTRONIC DEVICES↗

Dissociative photoionization of NO across a shape resonance in the XUV range using circularly polarized synchrotron radiation

We report benchmark results for dissociative photoionization (DPI) spectroscopy and dynamics of the NO molecule in the region of the σ* shape resonance in the ionization leading to the NO + (c 3 Π) ionic state. The experimental study combines well characterized extreme ultraviolet (XUV) circularly polarized synchrotron radiation, delivered at the DESIRS beamline (SOLEIL), with ion-electron coincidence 3D momentum spectroscopy. The measured (N + , e) kinetic energy correlation diagrams reported at four discrete photon energies in the extended 23-33 eV energy range allow for resolving the different active DPI reactions and underline the importance of spectrally resolved studies using synchrotron radiation in the context of time-resolved studies where photoionization is induced by broadband XUV attosecond pulses. In the dominant DPI reaction which leads to the NO + (c 3 Π) ionic state, photoionization dynamics across the σ* shape resonance are probed by molecular frame photoelectron angular distributions where the parallel and perpendicular transitions are highlighted, as well as the circular dichroism CDAD(θ e ) in the molecular frame. The latter also constitute benchmark references for molecular polarimetry. The measured dynamical parameters are well described by multichannel Schwinger configuration interaction calculations. Finally, similar results are obtained for the DPI spectroscopy of highly excited NO + electronic states populated in the explored XUV photon energy range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep Eutectic Solvent Formed by Imidazolium Cyanopyrrolide and Ethylene Glycol for Reactive CO 2 Separations

Solvents made from a reactive ionic liquid, with an imidazolium cation and pyrrolide anion, and ethylene glycol at a wide compositional range were studied for separations of CO 2 at low partial pressures (<<0.1 bar up to 1 bar). Thermal analysis and measurements of viscosity and density show compacting of the liquid upon mixing with enhanced stability achieved by hydrogen bonding. A detailed mechanistic study was performed by IR, quantitative NMR, and ab initio calculations that show significant CO 2 absorption capacity below 5000 ppm of CO 2 in N 2 . Three reversible routes are found that yield carbonate (major product), carboxylate (moderate), and carbamate (minor) species. With CO 2 at 100% RH, bicarbonate along with carbonate species form. The CO 2 -ethlyene glycol reaction complex, the carbonate anion, is stabilized by the hydrogen bonding and Coulombic interactions, thus preventing evaporation of the solvent during regeneration. This study demonstrates a promising approach to designer green solvents for CO 2 separations in open systems such as direct air capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The dimeric [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} anion: Structural characterization of a magnetic basic-building-unit

New materials built from the [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} anionic basic-building-unit (BBU) exhibit interesting magnetic properties owing to the proximity of the two d{sup 1} V(IV) cations and the orbital interactions of fluoride and oxide ligands. In our search to target such materials, the vanadium oxide–fluoride compound [dpaH{sub 2}]{sub 2}[V{sub 2}O{sub 2}F{sub 8}] in which a dimeric anion [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} is isolated in a hydrogen bond network was hydrothermally synthesized (dpa=2,2′-dipyridylamine). This hydrogen bond network is able to stabilize the highly ionic species [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} as demonstrated with bond valence calculations. The coordination of the O{sup 2−}/F{sup −} ordered ligands was investigated and antiferromagnetic coupling of the isolated BBU was measured. - The new hybrid compound [dpaH{sub 2}]{sub 2}[V{sub 2}O{sub 2}F{sub 8}] built from the interesting [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} magnetic basic-building-unit (BBU) was synthesized by the hydrothermal method. The coordination of the O{sup 2−}/F{sup −} ordered ligands was investigated by BVS calculations and antiferromagnetic coupling was measured. Highlights: ► A new vanadium oxyfluoride was synthesized by hydrothermal method. ► The Dimeric [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} basic building unit is isolated in the hydrogen bond networks. ► The coordination of [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} units to the extended structure is investigated. ► Isolated [V{sub 2}O{sub 2}F{sub 8}]{sup 4−} units exhibit antiferromagnetic coupling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ambient Rare Earth Metal Electrodeposition in Nitrogen-Coordinated Silylamide Electrolyte

The transition to a sustainable, low-carbon economy demands energy-efficient and environmentally benign methods for rare earth metal (REM) production. Furthermore, while high-temperature molten salt electrolysis remains energy-intensive, corrosive, and environmentally unfriendly, emerging room-temperature processes based on conventional ionic liquids are also hindered by high viscosity and chemical instability. In this study, a nitrogen-coordinated, water-, oxygen-, and fluorine-free silylamide-based electrolyte is presented as a promising system for room-temperature REM electrodeposition. Derived from commercially available lithium silylamide precursors, the system enables facile synthesis, broad electrochemical stability, and tunable metal–ligand interactions. Electrochemical analysis reveals high voltammetric stripping reversibility, stable cathodic and anodic potentials, and selective neodymium (Nd) deposition at appreciable current densities (>1 mA/cm 2 ), with minimal parasitic reactions. Bulk experiments produced high-purity Nd with reproducible performance across multiple batches. Scaled deposition yielded over 1 g of Nd with near-theoretical mass efficiency (0.40 mg/C) and >90% purity. Using sacrificial dysprosium (Dy) and Nd metal anodes, the system maintained constant Nd loading during extended deposition and enabled cathodic codeposition of stripped anode material, demonstrating the electrolyte’s dual functionality for REM electrorefining. Collectively, this silylamide platform offers a compelling combination of electrochemical robustness, chemical resilience, and process scalability for sustainable ambient REM recovery.

36 - MATERIALS SCIENCE↗

About the parametric interplay between ionic Mach number, body-size, and satellite potential in determining the ion depletion in the wake of the S3-2 satellite

The variation of ion current depletion in the wake of the U.S. Air Force satellite S3-2 is quantitatively determined, taking into account altitudes in the range from 300 to 1100 km. The considered investigation has the objective to present results which besides of being of scientific interest per se are useful to the planning of future experiments of body-plasma electrodynamic interactions in a supersonic and sub-Alfvenic flow regime to be conducted on board the Shuttle/Spacelab. More specifically, it is expected that the outcome of investigations of the kind presented will be useful in the planning of instrument location on ejectable ensembles of probes and on the Orbiter itself in future Shuttle/Spacelab missions.

Samir, U.↗

Controlling swelling in mixed transport polymers through alkyl side-chain physical cross-linking

Semiconducting conjugated polymers bearing glycol side chains can simultaneously transport both electronic and ionic charges with high charge mobilities, making them ideal electrode materials for a range of bioelectronic devices. However, heavily glycolated conjugated polymer films have been observed to swell irreversibly when subjected to an electrochemical bias in an aqueous electrolyte. The excessive swelling can lead to the degradation of their microstructure, and subsequently reduced device performance. An effective strategy to control polymer film swelling is to copolymerize glycolated repeat units with a fraction of monomers bearing alkyl side chains, although the microscopic mechanism that constrains swelling is unknown. Here we investigate, experimentally and computationally, a series of archetypal mixed transporting copolymers with varying ratios of glycolated and alkylated repeat units. Experimentally we observe that exchanging 10% of the glycol side chains for alkyl leads to significantly reduced film swelling and an increase in electrochemical stability. Through molecular dynamics simulation of the amorphous phase of the materials, we observe the formation of polymer networks mediated by alkyl side-chain interactions. When in the presence of water, the network becomes increasingly connected, counteracting the volumetric expansion of the polymer film.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗