Search NASA⌕ Search

SEARCH · Search NASA

Results for “materials processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Thin Solid Films Topical Special Issue on ZnO related transparent conductive oxides

World-wide research activities on ZnO and related transparent conductive oxides (TCO) in thin film, nanostructured, and multilayered forms are driven by the vast potential of these materials for optoelectronic, microelectronic, and photovoltaic applications. Renewed interest in ZnO applications is partly stimulated by cost reduction in material processing and device development. One of the most important issues is doping and alloying with Al, Ga, In, Sn, etc. in order to tune properties. When highly doped, these materials are used as transparent-conducting contacts on solar cells, as well as in catalytic, spintronic, and surface acoustic wave devices. Film growth conditions, including substrate type and orientation, growth temperature, deposition rate, and ambient atmosphere, all play important roles in determining structural, electrical, magnetic, and optical properties.

14 SOLAR ENERGY↗

Extraction of mechanical properties of materials through deep learning from instrumented indentation

Instrumented indentation has been developed and widely utilized as one of the most versatile and practical means of extracting mechanical properties of materials. This method is particularly desirable for those applications where it is difficult to experimentally determine the mechanical properties using stress–strain data obtained from coupon specimens. Such applications include material processing and manufacturing of small and large engineering components and structures involving the following: three-dimensional (3D) printing, thin-film and multilayered structures, and integrated manufacturing of materials for coupled mechanical and functional properties. Here, we utilize the latest developments in neural networks, including a multifidelity approach whereby deep-learning algorithms are trained to extract elastoplastic properties of metals and alloys from instrumented indentation results using multiple datasets for desired levels of improved accuracy. We have established algorithms for solving inverse problems by recourse to single, dual, and multiple indentation and demonstrate that these algorithms significantly outperform traditional brute force computations and function-fitting methods. Moreover, we present several multifidelity approaches specifically for solving the inverse indentation problem which 1) significantly reduce the number of high-fidelity datasets required to achieve a given level of accuracy, 2) utilize known physical and scaling laws to improve training efficiency and accuracy, and 3) integrate simulation and experimental data for training disparate datasets to learn and minimize systematic errors. The predictive capabilities and advantages of these multifidelity methods have been assessed by direct comparisons with experimental results for indentation for different commercial alloys, including two wrought aluminum alloys and several 3D printed titanium alloys.

36 MATERIALS SCIENCE↗

The mechanical properties of Kel-F 800 (FK-800) as a function of crystallinity

Kel-F 800 is a copolymer of chlorotrifluoroethylene PTFE (75 wt. %) and vinylidene fluoride PVDF (25 wt. %). It has previously been used as a PBX binder for insensitive explosives such as PBX 9502 and LX-17. 3M started production of Kel-F 800 in 1957 and small-scale batches continued to be made until 2002 when production ceased due to environmental concerns regarding one of the emulsifiers used during production. Around 2000 the Kel-F 800 name was changed to FK-800 to avoid trademark concerns because rights to produce another polymer with a similar tradename (Kel-F 81) had been sold to another manufacturer. The Kel designation came from the original manufacturer of PCTFE (Kel-F 81), the Kellog company. To avoid confusion this document will only refer to Kel-F 800. In 2006, production of small-scale batches of Kel-F 800 was started again by 3M in response to customer enquiries. This new material, the first blended batch is referred to as LOT 1, was produced with a different emulsifier than used previously. Because Kel-F 800 is made in a small batch reactor, considerable variation in crystallinity can be expected from lot to lot and year to year. In many ways, this is not significant since the material is dissolved in a solvent (often MEK, ethylmethyl ketone or ethyl acetate) for PBX production purposes. This destroys the as received crystallinity and the resulting crystallinity in the processed material is a function of polymer molecular weight and thermal history. Producing large billets of Kel-F 800 from solvent extraction is not practical and so a compression molding technique has been used above the melting temperature. This method also removes residual crystallinity from the supplied granules. The molecular weight of a polymer can be estimated by several techniques, the most common being gel permittivity chromatography (GPC), size exclusion chromatography (SEC) and shear rheometry measurements of polymer/solvent solutions. Changes in molecular weight will affect the crystallization rate and the maximum crystallinity reached for a specific thermal history. Both references agree that the new LOT 1 material molecular weight falls within the deviation found from averaging previous historical lots of Kel-F 800.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of gravity on liquid phase sintering

The unique conditions offered by the earth orbital environment in material processing involving both solid and liquid phases, such as liquid phase sintering, were studied. An experimental development program involving both test and theoretical work was initiated. Experimental work using material combinations selected such that maximum information about the effect of gravity can be derived has been conducted. Wetting of the solid phase by the liquid during sintering is an important phenomenon in liquid phase sintering, and gravity has influence on both capillary phenomenon and density segregation; hence, material combinations were selected such that these two effects can be suitably studies. The experimental work is meant to form the basis for similar comparative work done under low-g conditions. The part of the model dealing with the capillary phenomenon, as related to liquid phase sintering and the effect of gravity on it, suggest that gravity will have negligible effect on the Bond number and that the cohesive force is dependent on both the amount of liquid phase and the angle of contact.

Mookherji, T.↗

Alloy Evaluation and Flow Forming Process Modeling for Net Shape Aerospace Structures

Over the past decade, NASA Langley Research Center (LaRC) has led several manufacturing demonstration projects exploiting flow forming technology. The work has resulted in the commercial-scale manufacture of 10-ft. diameter single-piece, integrally stiffened cylinders. Near-net-shape flow forming offers simplified manufacturing schedules and cost savings through reduced part count. Reduction or elimination of machining, welding, and/or riveting can also lead to significant performance gains. NASA LaRC recently established a flow forming research facility to investigate new alloys and stiffener geometries for fuselage and launch vehicle cryotank applications. Candidate aluminum alloys and heat treatment combinations have been characterized through advanced mechanical testing and microscopy to maximize workability during flow forming trials. Elasto-plastic deformation simulations of the forming process have been performed using the finite element software DEFORM and correlated with forming trial results. The overall objective is to optimize structural performance through a combination of innovative materials, processes, and designs.

single-piece↗

Fractionation of Oxygen Isotopes in Uranium Oxides during Peroxide Precipitation and Dry Air Calcination

The interaction between uranium and oxygen-containing substrates is nearly ubiquitous within the nuclear fuel cycle. Given the well-known and predictable oxygen stable isotope compositions of atmospheric oxygen and meteoric waters around the world, the use of these isotopes as a potential geolocation or processing signature of uranium compounds has been of interest within the nuclear safeguards community. This study focuses on measuring the oxygen-stable isotope composition of synthetically produced uranium oxides to determine the mechanism and extent of fractionation during materials processing relevant to the nuclear fuel cycle. Here, metastudtite [UO 2 O 2 (H 2 O) 2 ] samples were first produced using water and hydrogen peroxide of a known oxygen isotope composition. This starting material was calcined in dry air at temperatures ranging from 300 °C to 1000 °C for 20 h producing oxides ranging in composition from UO 3 +x (0 ≤ x ≤ 0.5) to U 3 O 8 . In addition, calcinations between 500 and 800 °C were performed at different time intervals to evaluate the rate of isotopic equilibration. The δ 18 O values of water bound to metastudtite were measured by thermogravimetric analysis coupled to isotope ratio infrared spectroscopy (TGA–IRIS). A redesigned fluorination manifold was constructed at the University of Utah and was used to extract the bulk oxygen from precipitated and calcined products using bromine pentafluoride (BrF 5 ). Mineralization water on metastudtite (measured by TGA–IRIS) was closely associated with the aqueous environment of precipitation with a fractionation of +3.5 ± 0.6‰. In contrast, bulk oxygen from metastudtite (measured by fluorination and gas chromatography combined with isotope ratio mass spectrometry) was found to have an inconsistent fractionation with precipitation water. Samples calcined in dry air exhibited a wide range of oxygen isotope compositions which increased from δ 18 O = +1.4 ± 0.9‰ at 300 °C to +17.3 ± 0.9‰ at 1000 °C. This variation in δ 18 O values was a result of oxygen exchange with atmospheric O 2 and was found to be rapid at calcination temperatures greater than 600°C—with equilibration occurring in less than 2 h. These results provide insights into the incorporation and exchange of oxygen isotopes during precipitation and calcination processes comparable to those employed within the nuclear fuel cycle and establish a foundation for future investigations to build upon.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Commercial aspects of epitaxial thin film growth in outer space

A new concept for materials processing in space exploits the ultra vacuum component of space for thin film epitaxial growth. The unique low earth orbit space environment is expected to yield 10 to the -14th torr or better pressures, semiinfinite pumping speeds and large ultra vacuum volume (about 100 cu m) without walls. These space ultra vacuum properties promise major improvement in the quality, unique nature, and the throughput of epitaxially grown materials especially in the area of semiconductors for microelectronics use. For such thin film materials there is expected a very large value added from space ultra vacuum processing, and as a result the application of the epitaxial thin film growth technology to space could lead to major commercial efforts in space.

Ignatiev, Alex↗

Time Variability of the Dust Sublimation Zones in Pre-Main Sequence Disk Systems

The dust sublimation zone (DSZ) is the region of pre-main sequence (PMS) disks where dust grains most easily anneal, sublime, and condense out of the gas. Because of this, it is a location where crystalline material may be enhanced and redistributed throughout the rest of the disk. A decade-long program to monitor the thermal emission of the grains located in this region demonstrates that large changes in emitted flux occur in many systems. Changes in the thermal emission between 3 and 13.5 microns were observed in HD 31648 (MWC 480), HD 163296 (MWC 275), and DG Tau. This emission is consistent with it being produced at the DSZ, where the transition from a disk of gas to one of gas+dust occurs. In the case of DG Tau, the outbursts were accompanied by increased emission on the 10 micron silicate band on one occasion, while on another occasion it went into absorption. This requires lofting of the material above the disk into the line of sight. Such changes will affect the determination of the inner disk structure obtained through interferometry measurements, and this has been confirmed in the case of HD 163296. Cyclic variations in the heating of the DSZ will lead to the annealing of large grains, the sublimation of smaller grains, possibly followed by re-condensation as the zone enters a cooling phase. Lofting of dust above the disk plane, and outward acceleration by stellar winds and radiation pressure, can re-distribute the processed material to cooler regions of the disk, where cometesimals form. This processing is consistent with the detection of the preferential concentration of large crystalline grains in the inner few AU of PMS disks using interferometric spectroscopy with the VLTI.

Sitko, Michael L.↗

General algorithm for characterization of donor-acceptor pair recombination processes in solid-state materials

Radiative recombination processes can occur in solid-state systems through the pairing of donor and acceptor defects of the lattice. Recently, donor-acceptor pairs (DAP) have been proposed as promising candidates for quantum applications, and their signature has been observed in emerging low-dimensional materials. Therefore, the identification of such processes is gaining interest and requires methods to efficiently and reliably characterize them. Here, we introduce a general algorithm to identify DAP processes starting from the experimental photoluminescence (PL) emission spectrum and basic material parameters, including the lattice structure and dielectric constant. The algorithm recognizes possible DAP transitions from the emission pattern in the spectrum and returns the characteristic energy of the DAP transition and the separation between the donor and acceptor sites. By testing the algorithm on the photoluminescence spectrum of hexagonal boron nitride (hBN), we show that our method is robust against experimental errors and adds new capabilities to the investigation toolbox of semiconductors and their optical properties.

36 MATERIALS SCIENCE↗

Toward Multiscale, Multimaterial 3D Printing

Biological materials and organisms possess the fundamental ability to self-organize, through which different components are assembled from the molecular level up to hierarchical structures with superior mechanical properties and multifunctionalities. These complex composites inspire material scientists to design new engineered materials by integrating multiple ingredients and structures over a wide range. Additive manufacturing, also known as 3D printing, has advantages with respect to fabricating multiscale and multi-material structures. The need for multifunctional materials is driving 3D printing techniques toward arbitrary 3D architectures with the next level of complexity. In this paper, the aim is to highlight key features of those 3D printing techniques that can produce either multiscale or multimaterial structures, including innovations in printing methods, materials processing approaches, and hardware improvements. Several issues and challenges related to current methods are discussed. Ultimately, the authors also provide their perspective on how to realize the combination of multiscale and multimaterial capabilities in 3D printing processes and future directions based on emerging research.

36 MATERIALS SCIENCE↗

Nanocellulose Dewatering and Drying: Current State and Future Perspectives

The knowledge base for nanocellulose (NC) has grown exponentially over the past two decades and continues to expand with the increasing number of potential applications demonstrated in the literature and the patent space. NC has multiple forms depending on the starting cellulose source and the specific process used to produce it. Its high degree of surface reactivity makes it an ideal support structure for a wide variety of functional groups, leading to the ability to engineer materials for very specific applications. However, removing water from an NC suspension, e.g., dewatering and drying, while retaining the nanoscale properties of the NC remains a significant challenge to successful commercialization of NC materials. Processes for dewatering and drying of NC are desirable because of the high transport costs of shipping dilute aqueous suspensions, as well as end-use application requirements. Therefore, the development of nondestructive, cost-effective, scalable, and environmentally friendly dewatering and drying processes is important for commercial deployment of NC applications. This review addresses the current state of published knowledge on NC dewatering and drying and identifies research gaps that could be further explored in a precompetitive context to accelerate commercialization.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

BLUE LUMINOUS STARS IN NEARBY GALAXIES-UIT 005: A POSSIBLE LINK TO THE LUMINOUS BLUE VARIABLE STAGE

A detailed study of the blue supergiant UIT 005 (B2-2.5Ia{sup +}) in M 33 is presented. The results of our quantitative spectral analysis indicate that the star is a very luminous (log L/L{sub sun} {approx} 5.9 dex) and massive (M {approx} 50 M{sub sun}) object, showing a very high nitrogen-to-oxygen ratio in its surface (N/O{approx}8, by mass). Based on the derived Mg and Si abundances, we argue that this high N/O ratio cannot be the result of an initial low O content due to its location on the disk of M 33, a galaxy known to present a steep metallicity gradient. In combination with the He abundance, the most plausible interpretation is that UIT 005 is in an advanced stage of evolution, showing in its surface N enrichment and O depletion resulting from mixing with CNO processed material from the stellar interior. A comparison with the predictions of current stellar evolutionary models indicates that there are significant discrepancies, in particular with regard to the degree of chemical processing, with the models predicting a much lower degree of O depletion than observed. At the same time, the mass-loss rate derived in our analysis is an order of magnitude lower than the values considered in the evolutionary calculations. Based on a study of the surrounding stellar population and the nearby cluster, NGC 588, using Hubble Space Telescope/WFPC2 photometry, we suggest that UIT 005 could be in fact a runaway star from this cluster. Regardless of its origin, the derived parameters place the star in a region of the Hertzsprung-Russell diagram where luminous blue variables (LBVs) are usually found, but we find no evidence supporting photometric or spectroscopic variability, except for small H{alpha} changes, otherwise observed in Galactic B-type supergiants. Whether UIT 005 is an LBV in a dormant state or a regular blue supergiant could not be discerned in this study. Subsequent monitoring would help us to improve our knowledge of the more massive stars, bridging the gap between regular and more exotic blue supergiants.

79 ASTRONOMY AND ASTROPHYSICS↗

Rapid, autonomous analysis of HPGe gamma-ray spectra II: Uranium identification and characterization

RadID is a gamma-ray spectrum analysis program originally written to assist in the detection of the illicit movement of nuclear material. In this second of the three-document series we discuss how RadID detects the presence of uranium isotopes and determines a number of its characteristics, most notably or processed material and enriched estimates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dispersoids in rapidly solidified B2 nickel aluminides

Rapid solidification processing has been successfully used to create a uniform distribution of 30-nm TiB2 and HfC precipitates in a B2-ordered NiAl matrix, in order to enhance the matrix material's high-temperature strength and creep behavior. Attention is drawn to the question of the stability of carbide and boride dispersoids in an NiAl matrix during high-temperature exposures. The present alloys were consolidated at temperatures above 1422 K; the small size of precipitates in materials processed at such high temperatures gives an indication of their thermal stability, and further coarsening of the precipitates at elevated service temperatures is rendered unlikely by their low solubility in the matrix.

Jha, S. C.↗

Reliability Quantification of the Flexure: A Critical Stirling Convertor Component

Uncertainties in the manufacturing, fabrication process, material behavior, loads, and boundary conditions results in the variation of the stresses and strains induced in the flexures and its fatigue life. Past experience and the test data at material coupon levels revealed a significant amount of scatter of the fatigue life. Owing to these facts, the design of the flexure, using conventional approaches based on safety factor or traditional reliability based on similar equipment considerations does not provide a direct measure of reliability. Additionally, it may not be feasible to run actual long term fatigue tests due to cost and time constraints. Therefore it is difficult to ascertain material fatigue strength limit. The objective of the paper is to present a methodology and quantified results of numerical simulation for the reliability of flexures used in the Stirling convertor for their structural performance. The proposed approach is based on application of finite element analysis method in combination with the random fatigue limit model, which includes uncertainties in material fatigue life. Additionally, sensitivity of fatigue life reliability to the design variables is quantified and its use to develop guidelines to improve design, manufacturing, quality control and inspection design process is described.

Shah, Ashwin R.↗

Material Recovery Facilities (MRFs) in the United States: Operations, revenue, and the impact of scale

An analysis was conducted using nationwide survey data to evaluate how material recovery facilities (MRFs) operations vary regionally and with scale. The survey characterized materials, processes, and energy use involved with operations, and revenue for recyclables. This is the first nationwide analysis of MRFs in the US that accounts for mass processed, energy consumed, and revenue. Of a population of 521 MRFs, 48 responses representing MRFs from five US regions were received and analyzed (9.2 % response rate). Responses were analyzed by size according to yearly mass of inbound materials (small: <1,000 Mg/year, medium: 1,000–10,000 Mg/year, and large: >10,000 Mg/year). Most MRFs identify as single-stream; source from residences; utilize tipping floors, picking lines, baling and warehousing; and are powered by electricity. Most revenue and inbound mass (>50%) came from fiber (cardboard and paper). Glass had little revenue, and plastics were difficult to transition to market. Percent residue ranged from 1-39%, averaged <20%, and increased as the mass of inbound material increased. Large MRFs reported more sources of material, employed advanced sorting technology, had greater plastics revenue (33% versus 5% for small MRFs), and had more market access for plastics compared to small MRFs. Large MRFs had two orders of magnitude less annual electricity consumption per Mg recyclables than small MRFs (5–90 kWh/Mg versus ∼300–550 kWh/Mg). Results demonstrate environmental and economic benefits of larger-scale MRFs, which could be implemented more broadly in the US through regional hub-and-spoke arrangements for collecting and processing recyclables, lowering energy consumption and increasing revenue for recyclables.

Hub-and-Spoke↗

The promise of space processing

The long exposure to a virtually zero-gravity environment is a truly unique situation that cannot be duplicated or even approximated for any length of time on earth. The topics discussed are: (1) low gravity; (2) atmospheric effects; (3) potential advantages of materials processing in space; (4) the absence of buoyancy-driven convection; (5) the absence of hydrostatic pressure; (6) the absence of sedimentation and buoyancy; (7) containerless processing; and (8) ultrahigh vacuum processing.

Source record↗

Exploiting Machine Learning in Multiscale Modelling of Materials

Recent developments in efficient machine learning algorithms have spurred significant interest in the materials community. The inherently complex and multiscale problems in Materials Science and Engineering pose a formidable challenge. The present scenario of machine learning research in Materials Science has a clear lacunae, where efficient algorithms are being developed as a separate endeavour, while such methods are being applied as ‘black-box’ models by others. The present article aims to discuss pertinent issues related to the development and application of machine learning algorithms for various aspects of multiscale materials modelling. The authors present an overview of machine learning of equivariant properties, machine learning-aided statistical mechanics, the incorporation of ab initio approaches in multiscale models of materials processing and application of machine learning in uncertainty quantification. In addition to the above, the applicability of Bayesian approach for multiscale modelling will be discussed. Critical issues related to the multiscale materials modelling are also discussed.

42 ENGINEERING↗