Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Hydrodynamics of Two-Phase Flows through Porous Media in Microgravity: Packed Bed Reactor Experiment onboard of the International Space Station

The objective of the Packed Bed Reactor Experiment was to develop a fundamental understanding of the hydrodynamics of two-phase flow with no phase transition through porous media in microgravity. This work describes two experimental campaigns flown on the International Space Station (ISS) that were designed to achieve the objective. This work presents the results on flow patterns observed, two-phase flow pressure drop in porous media, and the impact of capillary effects on pressure drop at various gas and liquid flow rates. This work is the first to present predictive correlations of the two-phase friction factor for the different regimes identified based on the superficial liquid and gas velocity in microgravity, the first to hypothesize the different regimes based on the change in slope of the pressure gradient versus flow rate plots, the first to address the effects of the capillarity on the pressure gradient and the first to measure column holdup and assess the effective porosity based on the packing and the trapped gas bubbles. Experimental data on pressure drop in gas (N2) – liquid (water) flow show the presence of four different flow regimes in microgravity. Dispersed bubble flow (DB) and pulse (P) flow regimes are detected at high liquid flow rates, whereas at low liquid flow rates “large bubble” or elongated bubble (LB) and “gas channeling” (GC) regimes are observed. For these different flow regimes, different two-phase flow friction factor and pressure gradient correlations are presented for the first time as a function of the gas and liquid modified Reynolds numbers and Suratman number. Within the viscous-capillary (V-C) regime, it is found that the capillary contribution is the dominant force that contributes to the pressure drop for the wetting case (glass). However, for the non-wetting packing (Teflon), the viscous contribution dominates. It was found that the gas hold-up and pressure drop are functions of bed history at low liquid and gas flow rates with the magnitude of the hysteresis decreasing with increasing flow rates. PBRE-2 results show that the capillary force is a strong function of the superficial liquid velocity but is a much weaker function of the superficial gas velocity and varies inversely with the particle diameter. Within the Viscous-Capillary (V-C) regime, over 90% of the pressure gradient is attributed to the capillary contribution in the gas continuous regime. However, in the large bubble regime, the viscous and capillary contributions were comparable. After the completion of PBRE-2 with glass spherical beads, another bed packed with alumina was installed. Pressure gradient data for the alumina packed bed (PBRE-Water Recovery) were transferred to the PI and were not analyzed by the authors of this work. The Packed Bed Reactor Experiment concluded its on-orbit operation after two successful campaigns of testing in 2017 and in 2021. The flight hardware was brought back from orbit and is being reconditioned for a series of future experiments referred to as PBRE-WRS in support of water recovery (WRS). The WRS series consists of testing different two-phase fluid system components and packed beds to assess their pressure gradient characteristics, which will be used for designing packed bed reactors for various applications relevant to life support. Although there is so much relevance of the experimental results obtained from the two PBRE campaign in microgravity to life support, these findings also apply to other applications that involve two phase flow in porous medium such as fuel cells, transport of nutrient to plants in space and other chemical and materials processing that involve two phase flows. These systems operate differently in microgravity because, due to the lack of buoyancy, the density difference between the phases becomes irrelevant and no longer leads to phase separation.

Packed Bed↗

Percolative metal-insulator transition in LaMnO 3

In this work, we show that the pressure-induced metal-insulator transition (MIT) in LaMnO 3 is fundamentally different from the Mott-Hubbard transition and is percolative in nature, with the measured resistivity obeying the percolation scaling laws. Using the Gutzwiller method to treat correlation effects in a model Hamiltonian that includes both Coulomb and Jahn-Teller interactions, we show, one, that the MIT is driven by a competition between electronic correlation and the electron-lattice interaction, an issue that has been long debated, and two, that with compressed volume, the system has a tendency towards phase separation into insulating and metallic regions, consisting, respectively, of Jahn-Teller distorted and undistorted octahedra. This tendency manifests itself in a mixed phase of intermixed insulating and metallic regions in the experiment. Conduction in the mixed phase occurs by percolation and the MIT occurs when the metallic volume fraction, steadily increasing with pressure, exceeds the percolation threshold v c ≈ 0.29. Finally, measured high-pressure resistivity follows the percolation scaling laws quite well, and the temperature dependence follows the Efros-Shklovskii variable-range hopping behavior for granular materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sol-Gel Glasses

Multicomponent homogeneous, ultrapure noncrystalline gels/gel derived glasses are promising batch materials for the containerless glass melting experiments in microgravity. Hence, ultrapure, homogeneous gel precursors could be used to: (1) investigate the effect of the container induced nucleation on the glass forming ability of marginally glass forming compositions; and (2) investigate the influence of gravity on the phase separation and coarsening behavior of gel derived glasses in the liquid-liquid immiscibility zone of the nonsilicate systems having a high density phase. The structure and crystallization behavior of gels in the SiO2-GeO2 as a function of gel chemistry and thermal treatment were investigated. As are the chemical principles involved in the distribution of a second network former in silica gel matrix being investigated. The procedures for synthesizing noncrystalline gels/gel-monoliths in the SiO2-GeO2, GeO2-PbO systems were developed. Preliminary investigations on the levitation and thermal treatment of germania silicate gel-monoliths in the Pressure Facility Acoustic Levitator were done.

Mukherjee, S. P.↗

High T c layered ferrielectric crystals by coherent spinodal decomposition

Research in the rapidly-developing field of 2D-electronic materials has thus far been focused on metallic and semiconducting materials. However, complementary dielectric materials such as non-linear dielectrics are needed to enable realistic device architectures. Candidate materials require tunable dielectric properties and pathways for heterostructure assembly. Here we report on a family of cation-deficient transition metal thiophosphates whose unique chemistry makes them a viable prospect for these applications. In these materials, naturally occurring ferrielectric heterostructures composed of centrosymmetric In 4/3 P 2 S 6 and ferrielectrically-active CuInP 2 S 6 are realized by controllable chemical phase separation in van-der-Waals bonded single crystals. CuInP 2 S 6 by itself is a layered ferrielectric with Tc just over room-temperature which rapidly decreases with homogenous doping. Surprisingly, in our composite materials, the ferrielectric Tc of the polar CuInP 2 S 6 phase increases. This effect is enabled by unique spinodal decomposition that retains the overall van-der-Waals layered morphology of the crystal, but chemically separates CuInP 2 S 6 and In 4/3 P 2 S 6 within each layer. The average spatial periodicity of the distinct chemical phases can be finely controlled by altering the composition and/or synthesis conditions. One intriguing prospect for such layered spinodal alloys is large volume synthesis of 2D in-plane heterostructures with periodically alternating polar and non-polar phases.

36 MATERIALS SCIENCE↗

P3HT-Based Polymer Solar Cells with 8.25% Efficiency Enabled by a Matched Molecular Acceptor and Smart Green-Solvent Processing Technology

Here, a novel molecular acceptor of TrBTIC (2,7,12-tris((2-(3-oxo-2,3-dihydroinden- 1-ylidene)malononitrile-7-benzothiadiazole-2-)truxene) is designed by attaching the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrilebenzothiadiazole (BTIC) electron-deficient unit to an electron-rich truxene core. TrBTIC has excellent solubility in common solvents and features good energy level matching with poly(3-hexylthiophene) (P3HT). Interestingly, P3HT can be readily dissolved in warm 1,2,4-trimethylbenzene (TMB), a green solvent, but crystallizes slowly with long-term aging in TMB at room temperature. A prephase separation can thus occur before active blend film deposition, and the separation degree can be easily controlled by varying the aging time. After 40 min of aging, the resulting active blend has the most appropriate phase separation with uniform nanowires, which forms favorable interpenetrating networks for exciton dissociation and charge transport. As a result, the device performance is improved from 6.62% to 8.25%. Excitingly, 8.25% is a new record for P3HT-based solar cells. The study not only provides an efficient nonfullerene acceptor for matching P3HT donors but also develops a promising processing technology to realize high-performance P3HT-based polymer solar cells with an efficiency over 8%.

36 MATERIALS SCIENCE↗

Competition between Abelian and Zeeman magnetic field effects in a two dimensional ultracold gas of fermions

The ground state of ultracold fermions in the presence of effects of orbital and Zeeman magnetic fields is analyzed. Five different states are found: unpolarized superconducting state, partially and fully polarized normal states and phase separated regions, partially or fully polarized. The system, in the presence of orbital synthetic magnetic field effects, shows non-monotonous changes of the phase boundaries when electron concentration is varied. We observe not only reentrant phenomena, but also density dependent oscillations of different areas of the phase diagram. Moreover the chemical potential shows oscillatory behavior and discontinuities with respect to changes in the number of fermions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Liquid-phase turbulence measurements in air-water two-phase flows using particle image velocimetry

Liquid-phase turbulence plays a vital role in determining various gas-liquid two-phase flow parameters, such as void fraction distribution, bubble morphology, bubble-bubble interactions, and interfacial area concentration. In this study, a two-phase flow database including both the gas- and liquid-phases measurements was developed focusing on three bubbly flow conditions in an air-water two-phase flow loop with a vertical one-inch diameter circular pipe test section. A particle image velocimetry (PIV) system integrating an optical phase separation method, i.e., the planar laser-induced fluorescence (PLIF) technique using fluorescent particles and optical filtration, was applied to measure the liquid-phase turbulence information, including the time-averaged velocity, Reynolds stress, and turbulent kinetic energy for the liquid phase. The PIV measurements were taken at three ports along the test section at 14.5, 51.5, and 88.5 pipe inner diameters downstream of a bubble injector. In addition, a double-sensor conductivity probe was used to measure radial distributions of the local time-averaged void fraction and gas velocity. The measured liquid-phase turbulence was used to benchmark Sato's turbulence model considering the bubble-induced shear stress for the three tested bubbly flows. The benchmark results showed good agreement between the PIV measurements and model predictions. Lastly, in the two bubbly flows tested that have low void fractions being less than 3%, the effect of the bubble-induced turbulence was found not significant. However, the bubble-induced shear stress becomes important with the increase of the void fraction.

42 ENGINEERING↗

Design of an artificial photosynthetic system for production of alcohols in high concentration from CO 2

Artificial photosynthesis of liquid fuels is a potential source for clean energy. Alcohols are particularly attractive products because of their high energy density and market value per amount of energy input. The major challenges in photo/electrochemical synthesis of alcohols from sunlight, water and CO 2 are low product selectivity, high membrane fuel-crossover losses, and high cost of product separation from the electrolyte. Here we propose an artificial photosynthesis scheme for direct synthesis and separation to almost pure ethanol with minimum product crossover using saturated salt electrolytes. The ethanol produced in the saturated salt electrolytes can be readily phase separated into a microemulsion, which can be collected as pure products in a liquid–liquid extractor. A novel design of an integrated artificial photosynthetic system is proposed that continuously produces >90 wt% pure ethanol using a polycrystalline copper cathode at a current density of 0.85 mA cm -2 . The annual production rate of >90 wt% ethanol using such a photosynthesis system operating at 10 mA cm -2 (12% solar-to-fuel (STF) efficiency) can be 15.27 million gallons per year per square kilometer, which corresponds to 7% of the industrial ethanol production capacity of California.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase coexistence implications of violating Newton’s third law

Newton’s third law, action = reaction, is a foundational statement of classical mechanics. However, in natural and living systems, this law appears to be routinely violated for constituents interacting in a nonequilibrium environment. Here, we use computer simulations to explore the macroscopic phase behavior implications of breaking microscopic interaction reciprocity for a simple model system. We consider a binary mixture of attractive particles and introduce a parameter that is a continuous measure of the degree to which interaction reciprocity is broken. In the reciprocal limit, the species are indistinguishable, and the system phase separates into domains with distinct densities and identical compositions. Furthermore, increasing nonreciprocity is found to drive the system to explore a rich assortment of phases, including phases with strong composition asymmetries and three-phase coexistence. Many of the states induced by these forces, including traveling crystals and liquids, have no equilibrium analogs. By mapping the complete phase diagram for this model system and characterizing these unique phases, our findings offer a concrete path forward toward understanding how nonreciprocity shapes the structures found in living systems and how this might be leveraged in the design of synthetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-order melting of a weak spin-orbit mott insulator into a correlated metal

Herein, the electronic phase diagram of the weak spin-orbit Mott insulator (Sr 1-x La x ) 3 Ir 2 O 7 is determined via an exhaustive experimental study. Upon doping electrons via La substitution, an immediate collapse in resistivity occurs along with a narrow regime of nanoscale phase separation comprised of antiferromagnetic, insulating regions and paramagnetic, metallic puddles persisting until x≈0.04. Continued electron doping results in an abrupt, first-order phase boundary where the Néel state is suppressed and a homogenous, correlated, metallic state appears with an enhanced spin susceptibility and local moments. In conclusion, as the metallic state is stabilized, a weak structural distortion develops and suggests a competing instability with the parent spin-orbit Mott state.

36 MATERIALS SCIENCE↗

Countercurrent distribution of biological cells

Detailed physiochemical studies of dextran/poly(ethylene glycol) (PEG) two phase systems were carried out to characterize and provide understanding of the properties of the systems which determine cell partition and the electrophoretic behavior of phase drops responsible for electric field driven phase separation. A detailed study of the electrostatic and electrokinetic potentials developed in these systems was carried out. The salt partition was examined both in phase systems and with pure polymer solutions via equilibrium dialysis and mechanism of sulfate, chloride and phosphate partition shown to be exclusion by PEG rather than binding by dextran. Salt partition was shown to have a strong effect on the polymer compositions of the phases as well, an effect which produces large changes in the interfacial tension between them. These effects were characterized and the interfacial tension shown to obey a power law with respect to its dependence on the length of the tie line describing the system composition on a phase diagram. The electrostatic potential differences measured via salt bridges were shown to obey thermodynamic predictions. The electrophoretic mobilities measured were utilized to provide a partial test of Levine's incomplete theory of phase drop electrophoresis. The data were consistent with Levine's expression over a limited range of the variables tested.

Brooks, D. E.↗

Chemical Imaging of Atmospheric Organic Particles in the Southern Great Plains Field Campaign Report

The main goal of this field project was to characterize the chemical and physical properties of atmospheric particles representative of the Southern Great Plains (SGP) environment to establish a relationship between the composition of aerosol particles and their atmospheric impacts. The specific research efforts were focused on in-depth microscopy studies of chemical and physical properties of atmospheric organic particles collected at the U.S. Department of Energy’s Atmospheric Radiation Measurement (ARM) SGP observatory. An array of novel molecular-level characterization and chemical imaging approaches were used to characterize chemical composition of particles and elucidate fundamental processes governing their atmospheric aging, evolution of chemical composition, optical properties, cloud formation ability, and implications for particle-cloud interactions – the most challenging problems relevant to predictive understanding of aerosol effects on climate.(1, 2) Atmospheric particles consist of a complex mixture of organic compounds with a wide range of molecular structures, morphologies, physical properties, and chemical reactivity. The chemical composition, morphology, and phase state of atmospheric particles are of crucial importance for understanding the formation and reaction mechanisms of particles, their atmospheric evolution, and their impact on climate. It is of great interest to understand how the chemical and morphological particle microstructure affects their physicochemical properties such as chemical reactivity, thermodynamics of gas-particle partitioning, phase separations inside individual particles, hygroscopicity, optical properties, and ability to form liquid droplets (cloud condensation nuclei) and ice crystals (ice nuclei) in clouds. The phase state of organic particles, which yet remains poorly understood, plays a key role in their physicochemical properties and has important implications in various atmospheric processes. Fundamental understanding of these physicochemical properties and their possible evolution in time requires advanced analytical approaches for chemical imaging of particles with a resolution on the scale of 10-100 nm.(3) Comprehensive characterization of the size-dependent chemical composition of individual particles collected at the site was carried out using advanced molecular-level characterization and imaging approaches to identify their possible sources and to correlate to their climatic properties.

Southern Great Plains, aerosols, HI-SCALE field ca↗

Advanced Modeling of Ions in Solutions, on Surfaces, and in Biological Environments (Final Scientific/Technical Report)

The research supported by this grant focused on modeling liquid water from basic microscopic theory and on developing advanced methodologies for molecular simulation and electronic structure calculation of large and disordered systems. Water is arguably the most important molecule on earth: without it there would be no life, as we know it. Water does not behave as a simple liquid. Understanding its unique and anomalous properties at the molecular level has been the focus of intense study during the entire last century and still is a major goal of research today. To address the problem we adopted a multipronged approach that included methodological and algorithmic developments as well as simulations of important model systems. We made progress on several key issues. (i) We implemented accurate electronic structure schemes for modeling water from quantum mechanical theory that make accessible in simulations processes driven by formation and breaking of chemical bonds. We studied in this way neat bulk water and simple solvated ions. We could understand, in particular, why hydronium, i.e. the positive water ion, diffuses faster than its negative counterpart, the hydroxyl, solving a 200-year-old ionic mystery of water, as reported in a news article featuring our study on Chemistry World, the magazine of the Royal Society of Chemistry (U.K.). (ii) Using advanced statistical mechanical techniques we studied water in the deeply undercooled regime, which may hold the clue to understanding many of the water anomalies. These conditions are currently only accessible to simulations based on empirical force fields. We found that deeply undercooled water, as described by the popular force field ST2, possesses a secondary critical point, below which it would spontaneously separate into two liquids, one of low-density (LDL) and one of high-density (HDL), much in the same way in which water and oil phase-separate at room temperature. The secondary critical point is supported indirectly by many experiments, but rapid ice nucleation has so far hindered direct observation. In related studies we gained new insight on the connection of the two metastable liquids with the two corresponding amorphous ice phases, LDA and HDA, which are observed experimentally. (iii) We developed and implemented several new algorithms for computing the electronic structure of large systems and to accelerate the calculation of electron exchange energies. We applied these methodologies to model nanomaterials, such as nanoribbons and nanoflakes, and to study water absorption and splitting on nanomaterials. (iv) We developed new local order descriptors. (v) In the last year of the project we developed a methodology based on deep neural networks to construct model interatomic potentials that can accurately reproduce ab-initio quantum mechanical simulations at the computational cost of empirical force fields. These potentials will make possible to access the size and time scales that are currently only accessible with empirical force fields without loosing the predictive power of ab-initio simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An end-to-end deep learning method for solving nonlocal Allen–Cahn and Cahn–Hilliard phase-field models

Here, we propose an efficient end-to-end deep learning method for solving nonlocal Allen–Cahn (AC) and Cahn–Hilliard (CH) phase-field models. One motivation for this effort emanates from the fact that discretized partial differential equation-based AC or CH phase-field models result in diffuse interfaces between phases, with the only recourse for remediation is to severely refine the spatial grids in the vicinity of the true moving sharp interface whose width is determined by a grid-independent parameter that is substantially larger than the local grid size. In this work, we introduce non-mass conserving nonlocal AC or CH phase-field models with regular, logarithmic, or obstacle double-well potentials. Because of non-locality, some of these models feature totally sharp interfaces separating phases. The discretization of such models can lead to a transition between phases whose width is only a single grid cell wide. Another motivation is to use deep learning approaches to ameliorate the otherwise high cost of solving discretized nonlocal phase-field models. To this end, loss functions of the customized neural networks are defined using the residual of the fully discrete approximations of the AC or CH models, which results from applying a Fourier collocation method and a temporal semi-implicit approximation. To address the long-range interactions in the models, we tailor the architecture of the neural network by incorporating a nonlocal kernel as an input channel to the neural network model. We then provide the results of extensive computational experiments to illustrate the accuracy, predictive capabilities, and cost reductions of the proposed method.

42 ENGINEERING↗

Lagrangian particle model for multiphase flows

A Lagrangian particle model for multiphase multicomponent fluid flow, based on smoothed particle hydrodynamics (SPH), was developed and used to simulate the flow of an emulsion consisting of bubbles of a non-wetting liquid surrounded by a wetting liquid. In SPH simulations, fluids are represented by sets of particles that are used as discretization points to solve the Navier-Stokes fluid dynamics equations. In the multiphase multicomponent SPH model, a modified van der Waals equation of state is used to close the system of flow equations. The combination of the momentum conservation equation with the van der Waals equation of state results in a particle equation of motion in which the total force acting on each particle consists of many-body repulsive and viscous forces, two-body (particle-particle) attractive forces, and body forces such as gravitational forces. Similarly to molecular dynamics, for a given fluid component the combination of repulsive and attractive forces causes a phase separation. The surface tension at liquid-liquid interfaces is imposed through component dependent attractive forces. The wetting behavior of the fluids is controlled by phase dependent attractive interactions between the fluid particles and stationary particles that represent the solid phase. The dynamics of fluids away from interface is governed by purely hydrodynamic forces. Comparison with analytical solutions for static conditions and relatively simple flows demonstrates the accuracy of the SPH model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dielectric function in the NIR-VUV spectral range of (In{sub x}Ga{sub 1−x}){sub 2}O{sub 3} thin films

We determined the dielectric function of the alloy system (In{sub x}Ga{sub 1−x}){sub 2}O{sub 3} by spectroscopic ellipsometry in the wide spectral range from 0.5 eV to 8.5 eV and for In contents ranging from x = 0.02 to x = 0.61. The predicted optical transitions for binary, monoclinic β-Ga{sub 2}O{sub 3}, and cubic bcc-In{sub 2}O{sub 3} are well reflected by the change of the dielectric functions' lineshape as a function of the In content. In an intermediate composition range with phase-separated material (x ≈ 0.3…0.4), the lineshape differs considerably, which we assign to the presence of the high-pressure rhombohedral InGaO{sub 3}-II phase, which we also observe in Raman experiments in this range. By model analysis of the dielectric function, we derived spectra of the refractive index and the absorption coefficient and energy parameters of electronic band-band transitions. We discuss the sub-band gap absorption tail in relation to the influence of the In 4d orbitals on the valence bands. The data presented here provide a basis for a deeper understanding of the electronic properties of this technologically important material system and may be useful for device engineering.

36 MATERIALS SCIENCE↗

Nanocarbon-copper thin film as transparent electrode

Researchers seeking to enhance the properties of metals have long pursued incorporating carbon in the metallic host lattice in order to combine the strongly bonded electrons in the metal lattice that yield high ampacity and the free electrons available in carbon nanostructures that give rise to high conductivity. The incorporation of carbon nanostructures into the copper lattice has the potential to improve the current density of copper to meet the ever-increasing demands of nanoelectronic devices. We report on the structure and properties of carbon incorporated in concentrations up to 5 wt. % (∼22 at. %) into the crystal structure of copper. Carbon nanoparticles of 5 nm–200 nm in diameter in an interconnecting carbon matrix are formed within the bulk Cu samples. The carbon does not phase separate after subsequent melting and re-solidification despite the absence of a predicted solid solution at such concentrations in the C-Cu binary phase diagram. This material, so-called, Cu covetic, makes deposition of Cu films containing carbon with similar microstructure to the metal possible. Copper covetic films exhibit greater transparency, higher conductivity, and resistance to oxidation than pure copper films of the same thickness, making them a suitable choice for transparent conductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transit Habitat Government-Reference Conceptual Design Reaction Control System Propulsion Concept Design Data Book

The function of Transit Habitat (TH) Reaction Control System (RCS) propulsion is to provide free-flying spacecraft capabilities and to augment Gateway stack control when docked on Gateway. The requirements of multiple propellant replenishments and extensive life operation have significant impacts on selection of the propulsion system concept and components for the RCS. The intent of this document is to provide insight into the government-reference conceptual design of a propulsion system for TH element. A pressure-fed hypergolic bi-propellant system is the assumed propulsion approach for the RCS. Its architectural concept is being traded within the NASA Moon to Mars architecture. A pressure-regulated system is examined. The propellants under consideration are Monomethyl Hydrazine (MMH) and Mixed Oxides of Nitrogen with 3% Nitric Oxide (MON3). A peer review was conducted to assess the flow schematic design and propulsion component selection, compliant with a set of assumed requirements. Redundant components to satisfy one-fault tolerance for function and two-fault tolerance against catastrophic events are incorporated in the propulsion concept design. Instrumentation laid out on the schematic would be used to gather data to monitor the health of the propulsion system and to support quantity gauging of the propulsion system fluids. Venting propellant ullage gas overboard during the refilling operations poses a significant concern to the external surfaces of the TH. A liquid/gas separator would be required to eliminate, or at least reduce, the amount of liquid propellant expelled in the vent gas mixture. The technology readiness level of the phase separator for the TH must be advanced. Metal diaphragm and non-positive-expulsion PMD propellant tank systems were traded against each other, with the PMD architecture being selected. A blowdown concept is also considered for the TH RCS propulsion. Its fluid schematic is derived from the pressure-regulated schematic with removal of assemblies involving the helium pressurization and ullage venting. Its system wet mass is 10% heavier than the pressure-regulated due to thruster performance loss and larger propellant tanks. There is no firm constraint on the propulsion system mass at this phase of the design. The blowdown concept can offer reduction in component count and operation, that would lead to a more reliable propulsion system. The blowdown concept would also benefit avionics, thermal, power, and structures on the TH. Assessing these benefits will be carried as a future work. Drawbacks of thrust and minimum impulse bit (MIB) variations due to the blowdown operation would be acceptable to Guidance, Navigation, and Control (GNC). Although the blowdown concept has been selected as a current baseline, further evaluation of the concept will be the subject of future work to ensure that the blowdown propulsion operation is appropriate for the HT RCS propulsion. This document also highlights key trade studies and design decisions, including pros and cons of the selected concept. Other appropriate options for components are pointed out for future assessments. Additional background information and documents for further review are referenced in this report.

spacecraft propulsion↗