Search NASA⌕ Search

SEARCH · Search NASA

Results for “scattering transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Stability of fluorite-type La 2 Ce 2 O 7 under extreme conditions

Here, the structural stability of fluorite-type La 2 Ce 2 O 7 was studied at pressure up to ~40 GPa and under hydrothermal conditions (~1 GPa, 350 °C), respectively, using synchrotron x-ray diffraction (XRD) and Raman scattering measurements. XRD measurements indicated that fluorite-type La 2 Ce 2 O 7 is not stable at pressures greater than 22.6 GPa and slowly transforms to a high-pressure phase. The high-pressure phase is not stable and changes back to the fluorite-type structure when pressure is released. The La 2 Ce 2 O 7 fluorite is also not stable under hydrothermal conditions and begins to react with water at 200~250 °C. Both Raman and XRD results suggest that lanthanum hydroxide La(OH) 3 and La 3+ -doped CeO 2 fluorite are the dominant products after hydrothermal treatment.

36 MATERIALS SCIENCE↗

Ab Initio Molecular Dynamics Simulations of Amorphous Calcium Carbonate: Interpretation of Pair Distribution Function and X-Ray Absorption Spectroscopy Data

The structure and transformation of hydrous amorphous calcium carbonate (ACC) are key to understanding biomineralization pathways and their relationship with the properties of the resulting material. Quantitative interpretation of scattering experiments aimed at elucidating the structure of ACC is challenging, due to the amorphous nature of this material, and, therefore, requires models for the structure and the scattering physics. Here, we generate physically realistic ensembles of hydrated ACC structures and their vibrational disorder from ab initio molecular dynamics (AIMD) simulations with an emphasis on enabling the consistent interpretation of the finer details of three complementary structural probes: neutron and x-ray pair distribution experiments and x-ray absorption spectroscopy (XAS). In each case, we simulate the signal directly in reciprocal space and then manipulate it into the real-space pair distribution function (PDF) or spectrum using the same procedures for the experimental and theoretical data. Good agreement with experiment was obtained across the three techniques with the simulations accounting well for all features in the spectra. Remaining small discrepancies pointed to differences between real samples and the idealized simulated systems such as deviations from the nominal CaCO3·nH2O stoichiometry. Additionally, the simulations offered a more accurate description of the local coordination environment of calcium than previous shell-by-shell fits to spectra of synthetic ACC and classical molecular dynamics simulations. This work demonstrates that AIMD is a powerful approach for extracting detailed structural information from neutron PDF, x-ray PDF, and XAS of amorphous carbonate phases.

Prange, Micah P.↗

Quantization effects in semiconductor nanostructures and singlet fission in molecular chromophores for photovoltaics and solar fuels

Hot carriers in semiconductors are electrons and/or holes that have energies greater than carriers that reside at the top and bottom of the conduction and valence bands, respectively; the latter carriers are in equilibrium with the lattice and have a temperature equal to the lattice (ambient) temperature. Hot carriers are created in semiconductors upon the absorption of photons with energies greater than the bandgap. The excess energy above the bandgap energy is in the form of kinetic energy. The hot carriers can cool to the lattice temperature via electron–phonon scattering and establish separate Boltzmann distributions for electrons and holes at the band edges. Thus, upon cooling, the excess kinetic energy of the hot carriers is transformed into heat and is unavailable to be converted into electrical or chemical free energy in a solar photon-converting cell. This hot-carrier cooling process significantly limits the maximum possible power conversion efficiency (PCE) of the free energy of solar photons into electrical free energy or chemical free energy in chemical bonds of fuels. However, if hot-carrier cooling can be slowed such that the hot carriers can be extracted before cooling to create higher photovoltages, or utilized to create additional electron-hole pairs through carrier multiplication, then beneficial use can be made of the excess energy of hot carriers and the maximum thermodynamic PCE can be dramatically increased. Quantization effects in semiconductor nanostructures, unique properties of some bulk semiconductors, and exciton multiplication in both semiconductors and molecular chromophores that undergo singlet fission have shown a path forward for potential dramatic increases in the PCEs of solar photons into electricity and solar fuels. The status, history, and future promise of the science and technology of these future approaches for different types of photovoltaic cells and cells for solar fuels will be discussed.

14 SOLAR ENERGY↗

Continuous-Energy Data Checks

The purpose of this report is to provide an overview of all Quality Assurance tests that have to be performed on a nuclear data set to be transformed into an ACE formatted nuclear data file. The ACE file is capable of containing different types of data such as continuous energy neutron data, thermal scattering data, etc. Within this report, we will limit ourselves to continuous energy neutron data.

99 GENERAL AND MISCELLANEOUS↗

Operators for scattering of particles with spin

Operators for simulating the scattering of two particles with spin are constructed. Three methods are shown to give the consistent lattice operators for PN, PV, VN and NN scattering, where P, V and N denote pseudoscalar meson, vector meson and nucleon. The projection method leads to one or several operators OG;r;n that transform according to a given irreducible representation G and row r. However, it gives little guidance on which continuum quantum numbers of total J, spin S, orbital momentum L or single-particle helicities l1;2 will be related with a given operator. This is remedied with the helicity and partial-wave methods. There first the operators with good continuum quantum numbers (J;P;l1;2) or (J;L;S) are constructed and then subduced to the irreps G of the discrete lattice group. The results indicate which linear combinations OG;r;n of various n have to be employed in the simulations in order to enhance couplings to the states with desired continuum quantum numbers. The total momentum of two hadrons is restricted to zero since parity P is a good quantum number in this case.

Prelovsek, Sasa↗

The Feinheit method: A phase-independent formulation of the period-luminosity relation for Cephids

The tight correlation between color and luminosity during the cyclical variation of a Cepheid is calibrated and shown to be a direct means by which most of the phase-dependent temperature-induced amplitude of the variable can be transformed away. The resulting Feinheit function, F = V - alpha (B-V) gives rise to a random-phase period-luminosity relation with an rms scatter of less than 0.20 mag. A comparison shows that the blue Feinheit method for distance determinations method from single-phase observations is as accurate as near-infrared photometry but has the added advantage of being able to use panoramic detectors for the data acquisition. The Feinheit function is identified as the surface area variation of the Cepheid during its cycle.

Madore, B. F.↗

Novel microporous zirconium silicate (K{sub 2}ZrSi{sub 3}O{sub 9}.2H{sub 2}O) from high temperature phase transformation

A new microporous zirconosilicate K{sub 2}ZrSi{sub 3}O{sub 9}.2H{sub 2}O (AV-15) has been prepared by high-temperature phase transformation at 910 {sup o}C. Its structure has been determined ab initio from powder X-ray diffraction data. The unit cell is orthorhombic, space group C222{sub 1} (no. 20), Z=4 with cell dimensions: a=8.105(3), b=10.684(5), c=12.030(5) A, V=1041.76(7) A{sup 3}. The framework connection of AV-15 is essentially the same as the previously reported sodium stannosilicate AV-10 while the locations of potassium and water molecules in the former are quite different from those of the sodium and water molecules in AV-10. In AV-10 sodium and water molecules form a sinucoidal chain, while potassium and water molecules build up a linear chain in AV-15. The water molecules in AV-15 are lost on heating with a typical zeolitic behaviour. SEM shows that the particle sizes and habits of AV-15 and parent umbite material are the same. The {sup 29}Si MAS NMR spectrum of AV-15 displays two resonances at ca. -89.4 and -90.1 ppm in a 1:2 intensity ratio. Thermogravimetry analysis confirms the existence of water in this material. -- Graphical abstract: A new microporous zirconosilicate has been prepared by high temperature phase transformation at 910 {sup o}C. Its structure has been determined ab initio from powder X-ray diffraction data. The water molecules in this material are lost below 125 {sup o}C in a way typical of zeolites and molecular sieves. Display Omitted

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High temperature phase transition in SOFC anodes based on Sr{sub 2}MgMoO{sub 6-{delta}}

The double perovskite Sr{sub 2}MgMoO{sub 6-{delta}} has been recently reported as an efficient anode material for solid oxide fuel cells (SOFCs). In the present work, this material have been investigated by high temperature X-ray diffraction (XRD), differential scanning calorimetry (DSC) and impedance spectroscopy to further characterise its properties as SOFC anode. DSC and XRD measurements indicate that Sr{sub 2}MgMoO{sub 6-{delta}} exhibits a reversible phase transition around 275 deg. C from triclinic (I1-bar) with an octahedral tilting distortion to cubic (Fm3-barm) without octahedral distortion. This phase transition is continuous with increasing temperature without any sudden cell volume change during the phase transformation. The main effect of the phase transformation is observed in the electrical conductivity with a change in the activation energy at low temperature. La{sup 3+} and Fe-substituted Sr{sub 2}MgMoO{sub 6-{delta}} phases were also investigated, however these materials are unstable under oxidising conditions due to phase segregations above 600 deg. C. - Graphical abstract: The double perovskite Sr{sub 2}MgMoO{sub 6}, recently proposed as an efficient SOFC anode for direct hydrocarbon oxidation, exhibits a reversible structural phase transition from triclinic to cubic at 275 deg. C.

36 MATERIALS SCIENCE↗

Conformal geometry of null hexagons for Wilson loops and scattering amplitudes

The cross-ratios do not uniquely fix the class of conformally equivalent configurations of null polygons. In view of applications to Wilson loops and scattering amplitudes we characterise all conformal classes of null hexagon configurations belonging to given points in cross-ratio space. At first this is done for the ordered set of vertices. Including the edges, we then investigate the equivalence classes under conformal transformations for null hexagons. This is done both for the set of null hexagons closed in finite domains of Minkowski space as well as for the set including those closed via infinity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Workshop to Identify Opportunities in Biological and Environmental Research Uniquely Enabled by the APS Upgrade

The development of synchrotron-based x-ray science has enabled tremendous scientific advances, driven both by discoveries of new fundamental ways to derive insight from the interaction of x-rays with matter and by the evolution of x-ray light sources themselves. Over the last 20-plus years, the U.S. Department of Energy’s (DOE’s) Advanced Photon Source (APS) at Argonne has yielded a multitude of transformational insights into science questions across numerous areas relevant to the biological, geological, geochemical, biogeochemical, and environmental sciences. Recent developments in accelerator technology, particularly the multi-bend achromat lattice, have led to plans to dramatically upgrade the APS, allowing an upgraded APS to offer orders-of-magnitude improvements in key parameters such as coherence and brightness, while retaining high-energy capabilities. These enhanced parameters are directly relevant to almost all hard x-ray imaging, scattering, and spectroscopy experiments (Eriksson et al., 2014). The APS Upgrade Project exceeds the capabilities of today’s synchrotrons by 2 to 3 orders of magnitude in brightness and coherent flux in the hard x-ray range, enabling a transformational range of new probes for the structure, properties, and functionality of matter. With vastly improved coherent flux, nearly all techniques can become microscopies. For example, frontiers inaccessible today will be opened by x-ray instruments that provide three-dimensional (3-D) real-space resolution down to nanometers across, up to millimeters of field of view, providing the ability to follow in real time relevant processes and trace element sensitivity down to a few atoms. In addition to the unprecedented spatial resolution across a large field of view, and with appropriate time resolution, the ability for high-throughput, four-dimension/five-dimension data collection enables unprecedented statistical analysis of complex biological and environmental systems in changing environments.

54 ENVIRONMENTAL SCIENCES↗

Probing phonons in plutonium

Plutonium (Pu) is well known to have complex and unique physico-chemical properties. Notably, the pure metal exhibits six solid-state phase transformations with large volume expansions and contractions along the way to the liquid state: {alpha} {yields} {beta} {yields} {gamma} {yields} {delta} {yields} {delta}{prime} {yields} {var_epsilon} {yields} liquid. Unalloyed Pu melts at a relatively low temperature {approx}640 C to yield a higher density liquid than that of the solid from which it melts, (Figure 1). Detailed understanding of the properties of plutonium and plutonium-based alloys is critical for the safe handling, utilization, and long-term storage of these important, but highly toxic materials. However, both technical and and safety issues have made experimental observations extremely difficult. Phonon dispersion curves (PDCs) are key experimenta l data to the understanding of the basic properties of Pu materials such as: force constants, sound velocities, elastic constants, thermodynamics, phase stability, electron-phonon coupling, structural relaxation, etc. However, phonon dispersion curves (PDCs) in plutonium (Pu) and its alloys have defied measurement for the past few decades since the discovery of this element in 1941. This is due to a combination of the high thermal-neutron absorption cross section of plutonium and the inability to grow the large single crystals (with dimensions of a few millimeters) necessary for inelastic neutron scattering. Theoretical simulations of the Pu PDC continue to be hampered by the lack of suitable inter -atomic potentials. Thus, until recently the PDCs for Pu and its alloys have remained unknown experimentally and theoretically. The experimental limitations have recently been overcome by using a tightly focused undulator x-ray micro-beam scattered from single -grain domains in polycrystalline specimens. This experimental approach has been applied successfully to map the complete PDCs of an fcc d-Pu-Ga alloy using the high resolution inelastic x-ray scattering (HRIXS) capability on ID28. The complete PDCs for an fcc Pu-0.6 wt% Ga alloy are plotted in Figure 2, and represent the first full set of phonon dispersions ever determined for any Pu-bearing materials. The solid curves (red) are calculated using a standard Born-von Karman (B-vK) force constant model. An adequate fit to the experimental data is obtained if interactions up to the fourth-nearest neighbours are included. The dashed curves (blue) are recent dynamical mean field theory (DMFT) results by Dai et al. The elastic moduli calculated from the slopes of the experimental phonon dispersion curves near the {Lambda} point are: C{sub 11} = 35.3 {+-} 1.4 GPa, C{sub 12} = 25.5 {+-} 1.5 GPa and C{sub 44} = 30.53 {+-} 1.1 GPa. These values are in excellent agreement with those of the only other measurement on a similar alloy (1 wt % Ga) using ultrasonic techniques as well as with those recently calculated from a combined DMFT and linear response theory for pure {delta}-Pu. Several unusual features, including a large elastic anisotropy, a small shear elastic modulus C{prime}, a Kohn-like anomaly in the T{sub 1}[011] branch, and a pronounced softening of the [111] transverse modes are found. These features can be related to the phase transitions of plutonium and to strong coupling between the lattice structure and the 5f valence instabilities. The HRIXS results also provide a critical test for theoretical treatments of highly correlated 5f electron systems as exemplified by recent dynamical mean field theory (DMFT) calculations for {delta}-plutonium. The experimental-theoretical agreements shown in Figure 2 in terms of a low shear elastic modulus C{prime}, a Kohn-like anomaly in the T{sub 1}[011] branch, and a large softening of the T[111] modes give credence to the DMFT approach for the theoretical treatment of 5f electron systems of which {delta}-Pu is a classic example. However, quantitative differences remain. These are the position of the Kohn anomaly along the T{sub 1}[011] branch, the energy maximum of the T[111] mode s and the softening of the calculated T[100] branch near the X point, which is not observed experimentally. These differences are significant and thus provide a framework for refined theoretical treatments. Systematic HRIXS experiments as a function of temperature and concentration in the fcc Pu-Ga alloys are underway.

43 PARTICLE ACCELERATORS↗

Atomic structure of Pt nanoclusters supported by graphene/Ir(111) and reversible transformation under CO exposure

We investigate the atomic structure of graphene/Ir(111) supported platinum clusters with on average fewer than 40 atoms by means of surface x-ray diffraction (SXRD), grazing incidence small angle x-ray scattering (GISAXS), and normal incidence x-ray standing waves (NIXSW) measurements, in comparison with density functional theory calculations (DFT). GISAXS revealed that the clusters with 1.3 nm diameter form a regular array with domain sizes of 90 nm. SXRD shows that the 1–2 monolayer high, (111) oriented Pt nanoparticles grow epitaxially on the graphene support. From the combined analysis of the SXRD and NIXSW data, a three-dimensional (3D) structural model of the clusters and the graphene support can be deduced which is in line with the DFT results. For the clusters grown in ultrahigh vacuum the lattice parameter is reduced by (4.6±0.1)% compared to bulk platinum. The graphene layer undergoes a strong Pt adsorption induced buckling, caused by a rehybridization of the carbon atoms below the cluster. Lastly, in situ observation of the Pt clusters in CO and O 2 environments revealed a reversible change of the clusters' strain state while successively dosing CO at room temperature and O 2 at 575 K, pointing to a CO oxidation activity of the Pt clusters.

74 ATOMIC AND MOLECULAR PHYSICS↗

Thermoelectric properties of CuS/Ag{sub 2}S nanocomposites synthesed by modified polyol method

This is the report on successful synthesis of Ag doped CuS nanostructures by modified polyol method. The resulting samples were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray (EDX), atomic force microscopy (AFM) and dynamic light scattering (DLS). Particle size of pure CuS nanoparticles (NPs) was 17 nm, 38 nm and 97 nm as determined from Scherrer formula, AFM and DLS, respectively. Introduction of Ag led to formation of CuS/Ag{sub 2}S composites. A transition at 55 K in thermopower is ascribed to structural transformation from hexagonal to orthorhombic structure. Further, their thermoelectric properties exhibit remarkable change owing to Ag doping in CuS nanostructures. The power factor improves with increasing Ag content. They reveal that CuS/Ag{sub 2}S nanocomposites are some of the potential candidates for generation of thermoelectricity in future.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ion-irradiation-induced amorphization of cobalt nanoparticles

The amorphization of Co nanoparticles embedded in SiO{sub 2} has been investigated by measuring their structure and size, before and after ion irradiation, by x-ray absorption spectroscopy and small-angle x-ray scattering, respectively. Compared to bulk material, unirradiated crystalline nanoparticles exhibited increased structural disorder and a decreased average coordination number as a result of finite-size effects. Upon irradiation, there was no variation in nanoparticle size yet significant structural change. The coordination number decreased further while the mean value (bondlength), variance (Debye-Waller factor), and asymmetry (third cumulant) of the interatomic distance distribution all increased, as consistent with theoretical predictions for an amorphous elemental metal. Furthermore, the interatomic distance distribution for irradiated Co nanoparticles was in excellent agreement with our molecular dynamics simulations for bulk amorphous Co, and we have thus attributed the observed structural changes to the formation of an amorphous phase. Though such a crystalline-to-amorphous phase transformation is not readily achievable in bulk material by ion irradiation, we suggest that the perturbed structural state prior to irradiation and the amorphous surrounding matrix both contribute to nucleating and stabilizing the amorphous phase in irradiated Co nanoparticles. In addition to the structural properties, the vibrational properties of the amorphous phase were also probed, using temperature-dependent x-ray absorption spectroscopy measurements. The Einstein temperature of the unirradiated crystalline nanoparticles was lower than that of bulk material due to loosely bonded surface/interfacial atoms. In contrast, that of the irradiated amorphous nanoparticles was substantially higher than the bulk value. We attribute this apparent bond stiffening to the influence of the rigid surrounding matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Discriminating the Role of Surface Hydride and Hydroxyl for Acetylene Semihydrogenation over Ceria through In Situ Neutron and Infrared Spectroscopy

Ceria has been used as a hydrogenation catalyst especially in selective alkyne hydrogenation, but the reaction mechanism regarding the role of different surface hydrogen species remains unclear. Here, we utilized in situ neutron and infrared vibration spectroscopy to show the catalytic role of cerium hydride (Ce–H) and hydroxyl (OH) groups in acetylene hydrogenation over ceria surfaces with different degree of reduction. In situ inelastic neutron scattering spectroscopy (INS) proved that not only Ce–H but also surface atomic hydrogen species on the reduced ceria surface can participate in acetylene semihydrogenation. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) results implied that bridging OH groups both on the oxidized and reduced ceria are active in the selective hydrogenation of acetylene. It appears that surface Ce–H is more reactive than the coexisting OH species on the reduced ceria surface, but over-reduction of ceria also results in strongly bound species that may lead to catalyst deactivation. These spectroscopic results clearly explain the reaction mechanism including not only the surface chemistry but also the nature of the active hydrogen species for selective hydrogenation over ceria, providing insights into the design of more active and stable ceria-based catalysts for hydrogenation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leontovich–Fock Parabolic Equation Method in the Neumann Diffraction Problem on a Prolate Body of Revolution

This paper continues a series of publications on the shortwave diffraction of the plane wave on prolate bodies of revolution with axial symmetry in the Neumann problem. The approach, which is based on the Leontovich–Fock parabolic equation method for the two parameter asymptotic expansion of the solution, is briefly described. Two correction terms are found for the Fock’s main integral term of the solution expansion in the boundary layer. This solution can be continuously transformed into the ray solution in the illuminated zone and decays exponentially in the shadow zone. If the observation point is in the shadow zone near the scatterer, then the wave field can be obtained with the help of residue theory for the integrals of the reflected field, because the incident field does not reach the shadow zone. The obtained residues are necessary for the unique construction of the creeping waves in the boundary layer of the scatterer in the shadow zone.

97 MATHEMATICS AND COMPUTING↗

Invisible defects in complex crystals

We show that invisible localized defects, i.e. defects that cannot be detected by an outside observer, can be realized in a crystal with an engineered imaginary potential at the defect site. The invisible defects are synthesized by means of supersymmetric (Darboux) transformations of an ordinary crystal using band-edge wavefunctions to construct the superpotential. The complex crystal has an entire real-valued energy spectrum and Bragg scattering is not influenced by the defects. An example of complex crystal synthesis is presented for the Mathieu potential. -- Highlights: •We show the existence of invisible localized defects in complex crystals. •They turn out to be fully invisible to Bloch waves belonging to any lattice band. •An example of invisible defect is presented for a PT-symmetric Mathieu crystal.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photometric redshifts probability density estimation from recurrent neural networks in the DECam local volume exploration survey data release 2

Photometric wide-field surveys are imaging the sky in unprecedented detail. These surveys face a significant challenge in efficiently estimating galactic photometric redshifts while accurately quantifying associated uncertainties. In this work, we address this challenge by exploring the estimation of Probability Density Functions (PDFs) for the photometric redshifts of galaxies across a vast area of 17,000 square degrees, encompassing objects with a median 5 σ point-source depth of g = 24.3, r = 23 . 9 , i = 23.5, and z = 22.8 mag. Our approach uses deep learning, specifically integrating a Recurrent Neural Network architecture with a Mixture Density Network, to leverage magnitudes and colors as input features for constructing photometric redshift PDFs across the whole DECam Local Volume Exploration (DELVE) survey sky footprint. Subsequently, we rigorously evaluate the reliability and robustness of our estimation methodology, gauging its performance against other well-established machine learning methods to ensure the quality of our redshift estimations. Our best results constrain photometric redshifts with the bias of − 0 . 0013 , a scatter of 0.0293, and an outlier fraction of 5.1%. These point estimates are accompanied by well-calibrated PDFs evaluated using diagnostic tools such as Probability Integral Transform and Odds distribution. We also address the problem of the accessibility of PDFs in terms of disk space storage and the time demand required to generate their corresponding parameters.We present a novel Autoencoder model that reduces the size of PDF parameter arrays to one-sixth of their original length, significantly decreasing the time required for PDF generation to one-eighth of the time needed when generating PDFs directly from the magnitudes.

79 ASTRONOMY AND ASTROPHYSICS↗