Search NASA⌕ Search

SEARCH · Search NASA

Results for “section”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Absolute OH absorption cross sections (for lidar measurements)

Experimental data are employed to calculate absorption cross sections for several rotational lines in the OH A-X system. The cross sections are computed as functions of the spectral and line widths and temperature of a laser beam, and account for lifetimes and branching ratios. Detection limits for the P1(2) transition of the (1,0) band were examined. The oscillator strengths and cross-sections obtained are important for quantifying OH concentrations in the stratosphere from lidar return signals.

Mcgee, T. J.↗

Fragmentation of 710 and 1050 MeV/nuc Fe nuclei in CH2 and C targets - Isotopic cross sections for H targets

Fe nuclei of incident energies of 710 and 1050 MeV/nuc in CH2 and C targets are fragmented in order to measure isotopic cross sections in hydrogen targets. The telescope used to measure the charge and mass of the fragments is a Cerenkov x total energy telescope. The data are reported for z = 20-25 fragments. The number of individual events corresponding to each charged fragment is obtained and analyzed. Ratios of partial cross sections on C and CH2 targets indicate that simple scaling exists for isotope fractions as well as for charge fractions in different targets. The cross sections in hydrogen are obtained directly by a simple subtraction. Excitation functions for Mn and Cr nuclei are presented.

Webber, W. R.↗

Fragmentation of approximately 500 MeV/nuc Ne and O nuclei in CH2, C and H targets - Charge and isotopic cross sections

Fragmentation of Ne-20 and O-16 nuclei in CH2 and C targets at several energies between 400 and 1000 MeV/nuc is carried out in order to obtain cross sections in hydrogen for use in the galactic cosmic ray propagation problem. Charge changing and isotopic cross sections for the fragments with Z greater than or equal to 4 are obtained. The hydrogen cross sections are obtained by a subtraction procedure. The predictions of the semi-empirical model of Tsao and Silberberg (1979) are given and in general there is good agreement between the measurements and the predictions.

Webber, W. R.↗

s-wave threshold in electron attachment - Observations and cross sections in CCl4 and SF6 at ultralow electron energies

The threshold photoionization method was used to study low-energy electron attachment phenomena in and cross sections of CCl4 and SF6 compounds, which have applications in the design of gaseous dielectrics and diffuse discharge opening switches. Measurements were made at electron energies from below threshold to 140 meV at resolutions of 6 and 8 meV. A narrow resolution-limited structure was observed in electron attachment to CCl4 and SF6 at electron energies below 10 meV, which is attributed to the divergence of the attachment cross section in the limit epsilon, l approaches zero. The results are compared with experimental collisional-ionization results, electron-swarm unfolded cross sections, and earlier threshold photoionization data.

Chutjian, A.↗

Photoabsorption cross section of acetylene in the EUV region

The measurement of the absolute photoabsorption cross sections of C2H2 in the 175-740 A region by means of a double ionization chamber is reported. The continuum background source is the synchrotron radiation emitted by the Wisconsin 240 MeV electron storage ring. It is found that the cross sections range from 2 to a maximum of 36 Mb. Two new Rydberg series are identified and the cross section data are applied in the analysis of various sum rules. From the rules, it is shown that the data of C2H2 in the 580-1088 A range may be too low, while the measured ionization transition moment may be too high.

Wu, C. Y. R.↗

Modeling the curing process of thick-section autoclave cured composites

Temperature gradients are significant during cure of large area, thick-section composites. Such temperature gradients result in nonuniformly cured parts with high void contents, poor ply compaction, and variations in the fiber/resin distribution. A model was developed to determine the temperature distribution in thick-section autoclave cured composites. Using the model, long with temperature measurements obtained from the thick-section composites, the effects of various processing parameters on the thermal response of the composites were examined. A one-dimensional heat transfer model was constructed for the composite-tool assembly. The governing differential equations and associated boundary conditions describing one-dimensional unsteady heat-conduction in the composite, tool plate, and pressure plate are given. Solution of the thermal model was obtained using an implicit finite difference technique.

Loos, A. C.↗

Asymptotic high frequency analysis of the electromagnetic backscattering from an inlet model consisting of piecewise linearly tapered sections

Electromagnetic backscattering from an open ended three dimensional inlet model is analyzed and computed patterns are compared with results of experimental measurements. The model is comprised of two sections. The first section consists of a linearly tapered waveguide with a rectangular opening at one end and the other end is connected to the second section which is a uniform rectangular waveguide with a planar perfectly conducting termination. The model is electrically large so that many propagating modes are excited. The method of analysis contains conventional aperture integration and modal techniques combined with high frequency techniques, which employ concepts such as modal rays, geometrical theory of diffraction and equivalent currents. For the cases considered, it is shown that only a few of the many propagating modes contribute appreciably to the backscattered field. These modes are selected according to their modal ray angle directions.

Altintas, A.↗

Thin-sectioning and microanalysis of individual extraterrestrial particles

A long standing constraint on the study of micrometeorites has centered on difficulties in preparing them for analysis. This is due largely to their small dimensions and consequent practical limitations on sample manipulation. Chondritic micrometeorites provide a good example; although much has been learned about their chemistry and mineralogy almost nothing was known about such basic properties as texture and petrographic associations. The only way to assess such properties is to examine microstructure indigenous to the particles. Unfortunately, almost all micrometeorites, out of necessity, have been crushed and dispersed onto appropriate substances prior to analysis, and most information about texture and petrography was lost. Recently, thin-sections of individual extraterrestrial particles have been prepared using an ultramicrotome equipped with a diamond knife. This procedure has been applied to stratospheric micrometeorites and Solar Max impact debris. In both cases the sections have enabled observation of a variety of internal particle features, including textures, porosity, and petrographic associations. The sectioning procedure is described and analysis results for chondritic micrometeoroids and select particles from Solar Max are presented.

Bradley, J. P.↗

An atlas of objectively analyzed atmospheric cross sections, 1973-1980

Atmospheric variability over time scales greater than one month is conceptually simplified and readily recognized from vertical cross-sections of zonal-monthly mean data. The reduction to two dimensions, latitude and height, explicitly eliminates all zonal waves but implicity retains their effects on the thermal-pressure fields and the dynamically related zonal wind fields. This atlas contains 96 examples, spanning all latitudes in both the northern and southern hemispheres and two decades in pressure, from 1000 to 10 mb. Four analyses, representing each month from January 1973 through December 1980, depicts the potential virtual temperature, the observed zonal wind velocity, the virtual temperature and the geostrophic zonal wind velocity. Each variable is contoured at a close interval to facilitate visual estimates of stability and vorticity via their gradients. The analyses are generated and contoured by objective computer methods from just one data source: in situ measurements from the conventional rawin-radiosonde system. Although the analyses are independently made at constant pressure levels (the mandatory levels) the cross-sections are drawn with geopotential height as the ordinate. With this ordinate one can observe the seasonal expansion and contraction of the earth's atmosphere, especially that of the polar stratosphere. Also, the quasi-biannual cycle can be identified and studied directly from successive cross-sections.

Goodman, J.↗

Cross sections for production of the 15.10 MeV and other astrophysically significant gamma-ray lines through excitation and spallation of sup 12 C and sup 16 O with protons

The ratio of the flux of 15.10-MeV gamma rays to the flux of 4.438-MeV gamma rays resulting from excitation of the corresponding states in C-12 as a sensitive measure of the spectrum of the exciting particles produced in solar flares and other cosmic sources. These gamma rays are produced predominantly by interactions with C-12 and O-16, both of which are relatively abundant in the solar photosphere. Gamma ray production cross sections for proton interactions have been reported previously for all important channels except for the production of 15.10-MeV gamma rays from O-16. The first reported measurement of the 15.10-MeV gamma ray production cross section from p + O-16 is presented here. The University of Maryland cyclotron was employed to produce 40-, 65-, and 86-MeV protons which interacted with CH2 and BeO targets. The resultant gamma ray spectra were measured with a high-purity germanium semiconductor detector at 70, 90, 110, 125, and 140 degrees relative to the direction of the incident beam for each proton energy. Other gamma ray lines resulting from direct excitation and spallation reactions with C-12 and 0-16 were observed as well, and their gamma ray production cross sections described.

Lang, F. L.↗

Cross sections for H(-) and Cl(-) production from HCl by dissociative electron attachment

A crossed target beam-electron beam collision geometry and a quadrupole mass spectrometer have been used to conduct dissociative electron attachment cross section measurements for the case of H(-) and Cl(-) production from HCl. The relative flow technique is used to determine the absolute values of cross sections. A tabulation is given of the attachment energies corresponding to various cross section maxima. Error sources contributing to total errors are also estimated.

Orient, O. J.↗

Detailed three-dimensional isentropic analysis using an objective cross-sectional approach

An approach is presented which is designed to give detailed, computationally-efficient meteorological objective analyses over data-rich regions, with results independent of numerical model influences. Observed station data and interstation gradients are used to interpolate pressure, wind, and moisture information from vertical cross-sections onto isentropci surfaces by means of cubic polynomials. Three-dimensional grid-point analyses of mass and moisture are obtained by first constructing a series of nearly parallel vertical cross sections over a specified area, and then filling in the space between adjacent vertical analyses by employing a second set of nearly orthogonal cross sections. Gradients obtained from the mass analyses are then combined with observed wind data to obtain thermally-consistent observed wind analyses. It is concluded that the resulting analyses are useful for preserving significnat horizontal and vertical gradients, such as those associated with jet-streak systems. Examples are given which verify the applicability of this analysis technique to radiosonde data.

Petersen, R. A.↗

Measurement of the ozone absorption cross-section at the 253.7 nm mercury line

The absorption cross-section of ozone at 253.7 nm is frequently used as a standard for the entire UV wavelength range. The presently accepted value is 1.147 x 10 to the -17th/sq cm, which is known with an uncertainty of about 2 percent. The cross-section has been recently measured by simultaneously monitoring the ozone pressure, the impurities in the ozone gas, the gas temperature, and the UV beam intensity. The cross-section at room temperature was found to be 1.137 x 10 to the -17th/sq cm having an uncertainty of + or - .7 percent. The improved accuracy will aid a number of ozone experiments including the in situ photometers and Solar Backscatter Ultraviolet instruments.

Mauersberger, K.↗

Cross section measurements at the Bevelac and their implications for cosmic ray studies

Measurements of cross sections at the Bevelac using C-12 and Fe-56 ions incident on H targets at several energies between 300 and 1700 MeV/nuc are reported. Of particular interest are the Be and B cross sections from C-12 which are about 30 percent less than the semiempirical predictions below about 1 GeV/nuc. These cross sections are presently being incorporated into an updated galactic-propagation program. Results are also presented on the charge and isotopic resolution of the cosmic-ray telescope used in these studies.

Webber, W. R.↗

Elastic electron scattering cross sections for molecular hydrogen

Using an electron-beam - molecular-beam apparatus and employing the relative flow technique, ratios of the differential elastic scattering cross sections (DCSs of H2 to He were measured at incident electron energies of 15-100 eV and over the angular range of 10-125 degrees. From these ratios, the absolute elastic DCSs for H2 were determined by normalization to accurate, available elastic DCSs of He. Since pure rotational structure was not resolved in this work, the DCSs reported are the sum of elastic and rotational excitations of H2 at room temperature. The reliability of the relative flow normalization to He was checked at each energy and angle by performing similar elastic DCS measurements on Ne (for which the cross sections are known). The resulting absolute Ne DCSs were found to be in good agreement (within 10 percent with the Ne elastic DCSs measured previously (Register and Trajmar, 1984). From the DCSs, integral and momentumtransfer cross sections were calculated. The present results are compared with other recent measurements.

Khakoo, M. A.↗

A study of radar cross section measurement techniques

Past, present, and proposed future technologies for the measurement of radar cross section were studied. The purpose was to determine which method(s) could most advantageously be implemented in the large microwave anechoic chamber facility which is operated at the antenna test range site. The progression toward performing radar cross section measurements of space vehicles with which the Orbital Maneuvering Vehicle will be called upon to rendezvous and dock is a natural outgrowth of previous work conducted in recent years of developing a high accuracy range and velocity sensing radar system. The radar system was designed to support the rendezvous and docking of the Orbital Maneuvering Vehicle with various other space vehicles. The measurement of radar cross sections of space vehicles will be necessary in order to plan properly for Orbital Maneuvering Vehicle rendezvous and docking assignments. The methods which were studied include: standard far-field measurements; reflector-type compact range measurements; lens-type compact range measurement; near field/far field transformations; and computer predictive modeling. The feasibility of each approach is examined.

Mcdonald, Malcolm W.↗

Absorption Cross-Sections of Sodium Diatomic Molecules

The absorption cross sections of sodium dimers were studied using a heat pipe over operating in the non-heat-pipe mode. Three wavelength regions were observed. They are in the red, the green-blue, and the near ultraviolet regions. The absorption cross section depends on the wavelength of the incident light. Representative peak values for the v"=0 progression in the red and green-blue regions are 2.59 A sup 2 (average value) and 11.77 A sup 2 (T sub ave=624 K). The value for the C greater than X transitions is several tenths A sup 2. The cross sections were measured from absorption spectra taken as a function of temperature.

Fong, Zeng-Shevan↗

Measurements of electron attachment lineshapes and cross sections at ultralow electron energies for c-C6F10, c-C6F12, C8F16 and 1,1,2-C2Cl3F3

Electron attachment cross sections are reported in the electron energy range 0-160 meV and at energy resolutions of 4.5-7.5 meV (FWHM) for the molecules c-C6F10 (perfluorocyclohexene), c-C6F12 (perfluoro-1,2-dimethylcyclobutane), C8F16 (perfluoro-1,3-dimethylcyclohexane) and 1,1,2-C2Cl3F3 (1,1,2-trichlorotrifluoroethane). Use is made of the Kr photoionization technique, and measured attachment lineshapes are converted to cross sections by normalization through attachment rate constants. Comparisons are made with attachment cross sections derived from swarm-measured rate constants. Similar to previous results in eight other molecules, the present four molecules exhibit resolution-limited onsets at a threshold consistent with an s-wave attachment behavior and with a neutral-negative-ion curve crossing at zero energy.

Alajajian, S. H.↗