Search NASA⌕ Search

SEARCH · Search NASA

Results for “shape modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Isospin Decomposition of the Photoproduced Sigma pi System Near the Lambda(1405)

Recent experimental results for the reaction \gamma + p \to K^+ + \Sigma + \pi\ from CLAS at Jefferson Lab are discussed. It was found that the mass distributions or "line shapes" of the three charge combinations \Sigma^+ \pi^-, \Sigma^0 \pi^0 and \Sigma^- \pi^+ differ significantly. Our results show that the \Lambda(1405), as the I=0 constituent of the reaction, must be accompanied by an I > 0 component. We discuss phenomenological fits to the data to test the possible forms and magnitudes of these amplitudes. A two-amplitude I=0 fit of Breit-Wigner form to the \Sigma^0\pi^0 channel alone works quite well. The addition of a single I=1 amplitude works fairly well to model all the line shapes simultaneously.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TEM Approaches for Microstructure-Informed Prediction of Mechanical Properties in Structural Alloys

Predicting the mechanical performance of structural alloys from their evolving microstructure remains a major challenge in materials science, particularly for nuclear structural materials, where irradiation-induced defects span multiple types and length scales and interact through complex mechanisms. The dispersed barrier hardening (DBH) [1] and Friedel–Kroupa–Hirsch (FKH) [2,3] models have been widely used to evaluate the hardening contributions of individual obstacles and to estimate tensile strength from quantified microstructures; however, when multiple size-dependent obstacles coexist and evolve, predicting temperature-dependent tensile strength becomes significantly more complex, and a fully consistent hardening model is still lacking. Transmission electron microscopy (TEM) plays a central role in refining hardening models and enabling predictive assessments of tensile strength evolution by providing quantitative characterization of dislocations, irradiation-induced defects (e.g., dislocation loops and cavities), precipitates, and grain structure (Fig. 1.). These experimentally measured defect densities are incorporated into physically based hardening models with size- and shape- dependent obstacle strengths [4], using root-sum-square superposition for obstacles of comparable strength and linear superposition for dissimilar ones [5]. In addition, recent advances in TEM [6-8], including high-resolution imaging, 4D-STEM strain mapping, EDS/EELS elemental analysis, and flash-polishing-based TEM specimen preparation and extraction-replica methods (Fig. 2), further improve the accuracy of microstructural quantification. By comparison with prior studies as well as our own results, we show that when TEM-derived microstructural information is carefully integrated with physically grounded hardening models, yield strength (or irradiation-induced hardening) measured at room temperature can be predicted with good quantitative agreement across multiple alloy classes. In-situ TEM combined with high-temperature mechanical testing represents an important next step for refining hardening models by directly probing dislocation–obstacle interactions across varying irradiation doses and temperatures [9]. Because the barrier strength factor (α) depends on both temperature and obstacle size, it should not be treated as a constant fitting parameter; rather, it must be explicitly evaluated to achieve physically meaningful predictions of mechanical behaviour at operating temperatures. This presentation therefore discusses why all strengthening contributions (e.g., Peierls stress, solid-solution strengthening, voids, bubbles, dislocation loops, dislocation lines, and grain boundaries) must be considered collectively, why appropriate superposition methods are essential when obstacles possess different barrier strength factors, how hardness measurements can be meaningfully related to tensile properties, and how TEM-derived microstructural information can be systematically incorporated into hardening models. More broadly, it outlines a pathway toward microstructure-informed prediction of mechanical properties and supports the goal of establishing science-based tools for evaluating structural materials in extreme environments [10].

Lin, Yan-Ru [ORNL] (ORCID:0000000339991473)↗

Two-dimensional solitons in media with stripe-shaped nonlinearity modulation

We introduce a model of media with the cubic attractive nonlinearity concentrated along a single or double stripe in the two-dimensional (2D) plane. The model can be realized in terms of nonlinear optics (in the spatial and temporal domains alike) and BEC. It is known from recent works that search for stable 2D solitons in models with a spatially localized self-attractive nonlinearity is a challenging problem. We make use of the variational approximation (VA) and numerical methods to investigate conditions for the existence and stability of solitons in the present setting. The result crucially depends on the transverse shape of the stripe: while the rectangular profile supports stable 2D solitons, its smooth Gaussian-shaped counterpart makes all the solitons unstable. This difference is explained, in particular, by the VA. The double stripe with the rectangular profile admits stable solitons of three distinct types: symmetric and asymmetric ones with a single-peak, and double-peak symmetric solitons. The shape and stability of the single-peak solitons of either type are accurately predicted by the VA. Collisions between identical stable solitons are briefly considered too, by means of direct simulations. Depending on the collision velocity, we observe excitation of intrinsic oscillations of the solitons, or their decay, or the collapse (catastrophic self-focusing).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-tier model reduction of viscoelastically damped finite element models

Transient simulations of linear viscoelastically damped structures necessitate critical computational resources to directly integrate the full-order finite element model with time-stepping algorithms. Traditional modal reduction techniques are not directly applicable to these systems since viscoelastic materials depend on time and frequency. A more appropriate reduction basis is obtained from the nonlinear, complex eigenvalue problem, whose eigenvectors capture the appropriate kinematics and enable frequency-based mode selection; unfortunately, the computational cost is prohibitive for computing these modes from large-scale engineering models. To address this shortcoming, this work proposes a novel two-tier reduction procedure to reduce the upfront cost of solving the complex, nonlinear eigenvalue problem. The first reduction step reduces the full-order model with real mode shapes linearized about various centering frequencies to capture the kinematics over a full range of viscoelastic material behavior (glassy, rubbery, and glass-transition zones). This tier-one reduction preserves time-temperature superposition and allows the equations to depend parametrically on operating temperature. The second-level reduction then solves the complex, nonlinear eigenmode solutions in the tier-one reduced space about a fixed temperature to further reduce the equations-of-motion. The method is demonstrated on a cantilevered sandwich plate to display its accuracy and efficiency in comparison to full-order model predictions.

97 MATHEMATICS AND COMPUTING↗

On the mechanics of filament winding. I - A generalized model

In this paper the filament winding process was analyzed to relate process variables to structural parameters. An analytical model has been developed for a filament wound preform by determining the necessary geometric and kinematic conditions. An equation of motion of winding was developed to predict layer by layer geometry using the mandrel shape as the initial boundary condition. This model provides the laws of motion of the traverse stroke relative to the mandrel to ensure that the filament laydown is of the predetermined geodesic path over the mandrel, that the winding density is distributed over the mandrel in the prearranged manner, and that the winding build is being formed to reproduce the preassigned shape or contour of the preform. From this analysis, the winding process parameters can be controlled accordingly to produce any given shape. The analytical model was used to produce computer simulation of the winding process. The dynamic simulation of the winding process visualizes and inspects the layer by layer path of the tow and provides process variables required to produce preforms of optimum structural parameters.

Hamouda, Hechmi↗

On the Properties of Cosmological Ionization Fronts

We investigate the properties of cosmological ionization fronts during the epoch of reionization using the Cosmic Reionization on Computers simulations. By analyzing reionization timing maps, we characterize ionization front velocities and curvatures and their dependence on the density structure of the intergalactic medium (IGM). The velocity distribution of ionization fronts in the simulations indicates that while the barrier-crossing analytical model captures the overall shape in high-velocity regions, it fails to reproduce the low-velocity tail, highlighting the non-Gaussian nature of the IGM’s density field. Ionization front velocities are inversely correlated with local density, propagating faster in underdense regions and more slowly in overdense environments. Faster ionization fronts also lead to higher postionization temperatures, reaching a plateau at ∼2 × 10$^{4}$ K for velocities exceeding 3000 km s$^{−1}$. Examining curvature statistics further establishes a connection between ionization front structure and the normalized density contrast ν, with trends in overdense regions aligning well with barrier-crossing model predictions, while deviations appear in underdense environments due to model limitations. These results provide a detailed characterization of ionization front dynamics and their interaction with the underlying density field, bridging small-scale reionization physics with large-scale observables such as the 21 cm signal and the IGM’s thermal history.

79 ASTRONOMY AND ASTROPHYSICS↗

Compaction of Titanium Powders

Accurate modeling of powder densification has been an area of active research for more than 60 years. The earliest efforts were focused on linearization of the data because computers were not readily available to assist with curve-fitting methods. In this work, eight different titanium powders (three different sizes of sponge fines<150 {micro}m,<75 {micro}m, and<45 {micro}m; two different sizes of a hydride-dehydride [HDH]<75 {micro}m and<45 {micro}m; an atomized powder; a commercially pure [CP] Ti powder from International Titanium Powder [ITP]; and a Ti 6 4 alloy powder) were cold pressed in a single-acting die instrumented to collect stress and deformation data during compaction. From these data, the density of each compact was calculated and then plotted as a function of pressure. The results show that densification of all the powders, regardless of particle size, shape, or chemistry, can be modeled accurately as the sum of an initial density plus the sum of a rearrangement term and a work-hardening term. These last two terms are found to be a function of applied pressure and take the form of an exponential rise.

36 MATERIALS SCIENCE↗

Strengthening and Improving Yield Asymmetry of Magnesium Alloys by Second Phase Particle Refinement Under the Guidance of Integrated Computational Materials Engineering

Improving yield strength and asymmetry is critical to expand applications of magnesium alloys in industry for higher fuel efficiency and lower CO 2 production. Grain refinement is an efficient method for strengthening low symmetry magnesium alloys, achievable by precipitate refinement. This study provides guidance on how precipitate engineering will improve mechanical properties through grain refinement. Precipitate refinement for improving yield strengths and asymmetry is simulated quantitatively by coupling a stochastic second phase grain refinement model and a modified polycrystalline crystal viscoplasticity φ-model. Using the stochastic second phase grain refinement model, grain size is quantitatively determined from the precipitate size and volume fraction. Yield strengths, yield asymmetry, and deformation behavior are calculated from the modified φ-model. If the precipitate shape and size remain constant, grain size decreases with increasing precipitate volume fraction. If the precipitate volume fraction is kept constant, grain size decreases with decreasing precipitate size during precipitate refinement. Yield strengths increase and asymmetry approves to one with decreasing grain size, contributed by increasing precipitate volume fraction or decreasing precipitate size.

36 MATERIALS SCIENCE↗

DES meets Gaia: discovery of strongly lensed quasars from a multiplet search

We report the discovery, spectroscopic confirmation and first lens models of the first two, strongly lensed quasars from a combined search in WISE and Gaia over the DES footprint. Their Einstein radii span a range between ≈2.0 arcsec and ≈0.4 arcsec. Two of these (WGD2038-4008, RA = 20:38:02.65, Dec. = -40:08:14.64; WGD2021-4115, RA = 20:21:39.45, Dec. = -41:15:57.11) also have confirmed deflector redshifts. The four-image lens WGD2038-4008, with source and deflector redshifts s = 0.777 ± 0.001 and zl = 0.230 ± 0.002, respectively, has a deflector with radius R eff ≈ 3.4 arcsec, stellar mass $\log(M_{\star}/M_{\odot}) = 11.64^{+0.20}_{-0.43}$, and shows extended isophotal shape variation. Simple lens models yield Einstein radii $R_{\rm E}=(1.30\pm0.04)^{\prime\prime},$ axis ratio $q=0.75\pm0.1$ (compatible with that of the starlight) and considerable shear-ellipticity degeneracies. The two-image lens WGD2021-4115 (r.a.=20:21:39.45, dec.=--41:15:57.11) has $z_{s}=1.390\pm0.001$ and $z_l = 0.335 \pm 0.002$, and Einstein radius $R_{\rm E} = (1.1\pm0.1)^{\prime\prime},$ but higher-resolution imaging is needed to accurately separate the deflector and faint quasar image. Finally, we also show high-rank candidate doubles selected this way, some of which have been independently identified with different techniques, and discuss a DES+WISE quasar multiplet selection.

79 ASTRONOMY AND ASTROPHYSICS↗

Determination of cloud optical depth with the multiple field of view sun photometer

An approach to determining cloud optical depth is presented which utilizes a multiple-field-of-view sun photometer, along with modeled behavior of transmittance ratios as a function of the field of view, to infer the optical depth. The data used in the analysis were collected during the FIRE Stratocumulus IFO, which took place from July 15 to 17, 1987. Values which were taken within an hour of local solar noon are presented and compared with the values computed for mu sub 0 = 1.0. The zenith angle for the measurements was between 11 and 18 deg. It is found that this method of inferring the optical depth indicates most clouds with optical depths within these limits. The measured curves have a slightly different shape than do the modeled ratios.

Hein, Paul F.↗

Impact of Fraction Size on Lung Radiation Toxicity: Hypofractionation may be Beneficial in Dose Escalation of Radiotherapy for Lung Cancers

Purpose: To assess how fraction size impacts lung radiation toxicity and therapeutic ratio in treatment of lung cancers. Methods and Materials: The relative damaged volume (RDV) of lung was used as the endpoint in the comparison of various fractionation schemes with the same normalized total dose (NTD) to the tumor. The RDV was computed from the biologically corrected lung dose-volume histogram (DVH), with an alpha/beta ratio of 3 and 10 for lung and tumor, respectively. Two different (linear and S-shaped) local dose-effect models that incorporated the concept of a threshold dose effect with a single parameter D{sub L50} (dose at 50% local dose effect) were used to convert the DVH into the RDV. The comparison was conducted using four representative DVHs at different NTD and D{sub L50} values. Results: The RDV decreased with increasing dose/fraction when the NTD was larger than a critical dose (D{sub CR}) and increased when the NTD was less than D{sub CR}. The D{sub CR} was 32-50 Gy and 58-87 Gy for a small tumor (11 cm{sup 3}) for the linear and S-shaped local dose-effect models, respectively, when D{sub L50} was 20-30 Gy. The D{sub CR} was 66-97 Gy and 66-99 Gy, respectively, for a large tumor (266 cm{sup 3}). Hypofractionation was preferred for small tumors and higher NTDs, and conventional fractionation was better for large tumors and lower NTDs. Hypofractionation might be beneficial for intermediate-sized tumors when NTD = 80-90 Gy, especially if the D{sub L50} is small (20 Gy). Conclusion: This computational study demonstrated that hypofractionated stereotactic body radiotherapy is a better regimen than conventional fractionation in lung cancer patients with small tumors and high doses, because it generates lower RDV when the tumor NTD is kept unchanged.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The energy spectra of solar flare electrons

A survey of 50 electron energy spectra from .1 to 100 MeV originating from solar flares was made by the combination of data from two spectrometers onboard the International Sun Earth Explorer-3 spacecraft. The observed spectral shapes of flare events can be divided into two classes through the criteria of fit to an acceleration model. This standard two step acceleration model, which fits the spectral shape of the first class of flares, involves an impulsive step that accelerates particles up to 100 keV and a second step that further accelerates these particles up to 100 MeV by a single shock. This fit fails for the second class of flares that can be characterized as having excessively hard spectra above 1 MeV relative to the predictions of the model. Correlations with soft X-ray and meter radio observations imply that the acceleration of the high energy particles in the second class of flares is dominated by the impulsive phase of the flares.

Evenson, P. A.↗

Self-consistent redshift estimation using correlation functions without a spectroscopic reference sample

ABSTRACT We present a new method to estimate redshift distributions and galaxy-dark matter bias parameters using correlation functions in a fully data driven and self-consistent manner. Unlike other machine learning, template, or correlation redshift methods, this approach does not require a reference sample with known redshifts. By measuring the projected cross- and auto-correlations of different galaxy sub-samples, e.g. as chosen by simple cells in colour–magnitude space, we are able to estimate the galaxy-dark matter bias model parameters, and the shape of the redshift distributions of each sub-sample. This method fully marginalizes over a flexible parametrization of the redshift distribution and galaxy-dark matter bias parameters of sub-samples of galaxies, and thus provides a general Bayesian framework to incorporate redshift uncertainty into the cosmological analysis in a data-driven, consistent, and reproducible manner. This result is improved by an order of magnitude by including cross-correlations with the cosmic microwave background and with galaxy–galaxy lensing. We showcase how this method could be applied to real galaxies. By using idealized data vectors, in which all galaxy-dark matter model parameters and redshift distributions are known, this method is demonstrated to recover unbiased estimates on important quantities, such as the offset Δz between the mean of the true and estimated redshift distribution and the 68 per cent, 95 per cent, and 99.5 per cent widths of the redshift distribution to an accuracy required by current and future surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Deriving Stable Peak Models to Fit Complex XPS Data From Cu Contaminated Pt Electrocatalysts

X-ray Photoelectron Spectroscopy spectra peak models, designed to partition photoemission signals emanating from different elements or chemical states within an atom, are fitted to data limited to an energy interval over which inelastically scattered photoemission signal can be estimated. While the choice of background approximation and line shapes of components to the peak model requires careful consideration, the energy interval used to define the data to which the peak model is optimized has a significant impact on the final peak model. The relationship between the background intensity and data intensity at the start and end of the energy interval dictates the line shapes used in the peak model. In this work, we devise a method to peak fit a complex overlapping Cu 3p and Pt 4f XPS peak structure to perform the elemental quantification. We first use an Al 2s peak to illustrate how background curves approach data at the limits of the energy interval over which the background is defined, influencing the analysis of XPS spectra. Next, we demonstrate the nature of interactions between specific line shapes (Voigt and pseudo-Voigt profiles) suitable for photoemission peaks and a specific background curve (Shirley) and a peak model is presented that includes components to the peak model that accommodates background intensity during fitting of the peak model to data. The peak model allowed for quantification of the contributions of Pt 4f peaks emanating from the substrate that exhibits strong asymmetry in the presence of the inhomogeneously distributed Cu species, mostly of Lorentzian character.

XPS↗

Antifogging abilities of model nanotextures

Nanometre-scale features with special shapes impart a broad spectrum of unique properties to the surface of insects. These properties are essential for the animal’s survival, and include the low light reflectance of moth eyes, the oil repellency of springtail carapaces and the ultra-adhesive nature of palmtree bugs. Antireflective mosquito eyes and cicada wings are also known to exhibit some antifogging and self-cleaning properties. In all cases, the combination of small feature size and optimal shape provides exceptional surface properties. In this work, we investigate the underlying antifogging mechanism in model materials designed to mimic natural systems, and explain the importance of the texture’s feature size and shape. While exposure to fog strongly compromises the water-repellency of hydrophobic structures, this failure can be minimized by scaling the texture down to nanosize. Furthermore, this undesired effect even becomes non-measurable if the hydrophobic surface consists of nanocones, which generate antifogging efficiency close to unity and water departure of droplets smaller than 2 μm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Splashing Droplets

Current data on droplet breakup is scarce for the sizes and velocities typical of practical applications such as in spray combustion processes and coating processes. While much more representative of practical applications, the small spatial scales and rapid time-scales prevent detailed measurement of the internal fluid dynamics and liquid property gradients produced by impinging upon surfaces. Realized through the extended spatial and temporal scales afforded by a microgravity environment, an improved understanding of drop breakup dynamics is sought to understand and ultimately control the impingement dynamics of droplets upon surfaces in practical situations. The primary objective of this research will be to mark the onset of different 'splashing modes' and to determine their temperature, pressure and angle dependence for impinging droplets representative of practical fluids. In addition, we are modeling the evolution of droplets that do not initially splash but rather undergo a 'fingering' evolution observed on the spreading fluid front and the transformation of these fingers into splashed products. An example of our experimental data is presented below. These images are of Isopar V impacting a mirror-polished surface. They were acquired using a high-speed camera at 1000 frames per second. They show the spreading of a single droplet after impact and ensuing finger instabilities. Normal gravity experimental data such as this will guide low gravity measurements in the 2.2 second drop tower and KC-135 aircraft as available. Presently we are in the process of comparing the experimental data of droplet shape evolution to numerical models, which can also capture the internal fluid dynamics and liquid property gradients such as produced by impingement upon a heated surface. To-date isothermal numerical data has been modeled using direct numerical simulations of representative splashing droplets. The data obtained so far indicates that the present model describes well the droplet wall interactions to a point in time just before splash. Additional information is included in the original extended abstract.

VanderWal, Randall L.↗

The Influence of Dynamic Contact Angle on Wetting Dynamics

When surface tension forces dominate, and regardless of whether the situation is static or dynamic, the contact angle (the angle the interface between two immiscible fluids makes when it contacts a solid) is the key parameter that determines the shape of a fluid-fluid interface. The static contact angle is easy to measure and implement in models predicting static capillary surface shapes and such associated quantities as pressure drops. By contrast, when the interface moves relative to the solid (as in dynamic wetting processes) the dynamic contact angle is not identified unambiguously because it depends on the geometry of the system Consequently, its determination becomes problematic and measurements in one geometry cannot be applied in another for prediction purposes. However, knowing how to measure and use the dynamic contact angle is crucial to determine such dynamics as a microsystem throughput reliably. In this talk we will present experimental and analytical efforts aimed at resolving modeling issues present in dynamic wetting. We will review experiments that show the inadequacy of the usual hydrodynamic model when a fluid-fluid meniscus moves over a solid surface such as the wall of a small tube or duct. We will then present analytical results that show how to parametrize these problems in a predictive manner. We will illustrate these ideas by showing how to implement the method in numerical fluid mechanical calculations.

Rame, Enrique↗

SHAPING THE GLOWING EYE PLANETARY NEBULA, NGC 6751

NGC 6751 is a highly structured multiple-shell planetary nebula (PN) with a bipolar outflow. In this work, we present a comprehensive set of spatially resolved, high spectral resolution, long-slit spectra and deep imaging from San Pedro Martir, Gemini, the H{alpha} composite full sky survey and archive images from the Hubble Space Telescope and Spitzer. This material allows us to identify all the main morphological components and study their detailed kinematics. We find a thick equatorial structure fragmented into multiple knots that enclose a fast expanding bubble with a filamentary surface structure. The knotty ring is surrounded by faint emission from a disk-like envelope. Lobes with embedded filaments form a bipolar outflow. The equatorial ring is tilted with respect to the line of sight and with respect to the bipolar outflow. A spherical halo surrounds the PN and there is material further out identified as a fragmented outer halo. This information is used to derive a three-dimensional morpho-kinematic model using the code SHAPE that closely replicates the observed image and long-slit spectra of the nebula, providing a fair representation of its complex structure. NGC 6751 is located close to the galactic plane and its large-scale surrounding environment is shown to be a gas-rich region. We find indications that the PN is interacting with the interstellar medium. Emission components from an extended nebulosity located a couple of arcminutes away from the nebula have radial velocities that are inconsistent with the rest of NGC 6751 and are confirmed as originating from the ambient material, not related to the PN, in agreement with a previous suggestion.

79 ASTRONOMY AND ASTROPHYSICS↗