Search NASA⌕ Search

SEARCH · Search NASA

Results for “sharp transition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Spin glass freezing and superconductivity in YBa2(Cu(1-x)Fe(x))3O7 alloys

The dynamics were studied of the iron spins in superconducting YBa2(Cu(0.94)Fe(0.06))3O7 by neutron time of flight measurements. Two samples were studied with slightly different characteristics, as shown by resistivity and neutron diffraction measurements. The same dynamical anomalies are observed by neutrons in both samples. Differences appear qualitative but not quantitative. In the whole temperature range, the q-dependence of the magnetic intensity mainly reflects the magnetic form factor of iron which shows that the iron spins are almost uncorrelated. The elastic and quasielastic intensities strongly vary with temperature. A spin glass like freezing is revealed at low temperature by a sharp decrease of the quasielastic intensity, an increase of the 'elastic' or resolution limited intensity and a minimum in the quasielastic width. The freezing temperature (T sub f - 18 K) corresponds to that already determined by a magnetic splitting in Mossbauer experiments. Above T sub f, the relaxation of the iron spins in the paramagnetic state is modified by the occurrence of superconductivity. An increase was observed of the quasielastic intensity and of the quasielastic width at the superconducting transition.

Mirebeau, I.↗

Uncertainty and Intelligence in Computational Stochastic Mechanics

Classical structural reliability assessment techniques are based on precise and crisp (sharp) definitions of failure and non-failure (survival) of a structure in meeting a set of strength, function and serviceability criteria. These definitions are provided in the form of performance functions and limit state equations. Thus, the criteria provide a dichotomous definition of what real physical situations represent, in the form of abrupt change from structural survival to failure. However, based on observing the failure and survival of real structures according to the serviceability and strength criteria, the transition from a survival state to a failure state and from serviceability criteria to strength criteria are continuous and gradual rather than crisp and abrupt. That is, an entire spectrum of damage or failure levels (grades) is observed during the transition to total collapse. In the process, serviceability criteria are gradually violated with monotonically increasing level of violation, and progressively lead into the strength criteria violation. Classical structural reliability methods correctly and adequately include the ambiguity sources of uncertainty (physical randomness, statistical and modeling uncertainty) by varying amounts. However, they are unable to adequately incorporate the presence of a damage spectrum, and do not consider in their mathematical framework any sources of uncertainty of the vagueness type. Vagueness can be attributed to sources of fuzziness, unclearness, indistinctiveness, sharplessness and grayness; whereas ambiguity can be attributed to nonspecificity, one-to-many relations, variety, generality, diversity and divergence. Using the nomenclature of structural reliability, vagueness and ambiguity can be accounted for in the form of realistic delineation of structural damage based on subjective judgment of engineers. For situations that require decisions under uncertainty with cost/benefit objectives, the risk of failure should depend on the underlying level of damage and the uncertainties associated with its definition. A mathematical model for structural reliability assessment that includes both ambiguity and vagueness types of uncertainty was suggested to result in the likelihood of failure over a damage spectrum. The resulting structural reliability estimates properly represent the continuous transition from serviceability to strength limit states over the ultimate time exposure of the structure. In this section, a structural reliability assessment method based on a fuzzy definition of failure is suggested to meet these practical needs. A failure definition can be developed to indicate the relationship between failure level and structural response. In this fuzzy model, a subjective index is introduced to represent all levels of damage (or failure). This index can be interpreted as either a measure of failure level or a measure of a degree of belief in the occurrence of some performance condition (e.g., failure). The index allows expressing the transition state between complete survival and complete failure for some structural response based on subjective evaluation and judgment.

Ayyub, Bilal M.↗

Single Atomically Sharp Lateral Monolayer p-n Heterojunction Solar Cells with Extraordinarily High Power Conversion Efficiency

The recent development of 2D monolayer lateral semiconductor has created new paradigm to develop p-n heterojunctions. Albeit, the growth methods of these heterostructures typically result in alloy structures at the interface, limiting the development for high-efficiency photovoltaic (PV) devices. Here, the PV properties of sequentially grown alloy-free 2D monolayer WSe 2 -MoS 2 lateral p-n heterojunction are explores. The PV devices show an extraordinary power conversion efficiency of 2.56% under AM 1.5G illumination. The large surface active area enables the full exposure of the depletion region, leading to excellent omnidirectional light harvesting characteristic with only 5% reduction of efficiency at incident angles up to 75°. Modeling studies demonstrate the PV devices comply with typical principles, increasing the feasibility for further development. Furthermore, the appropriate electrode-spacing design can lead to environment-independent PV properties. As a result, these robust PV properties deriving from the atomically sharp lateral p-n interface can help develop the next-generation photovoltaics.

14 SOLAR ENERGY↗

High-throughput screening of 2D materials identifies p-type monolayer WS2 as potential ultra-high mobility semiconductor

Abstract 2D semiconductors offer a promising pathway to replace silicon in next-generation electronics. Among their many advantages, 2D materials possess atomically-sharp surfaces and enable scaling the channel thickness down to the monolayer limit. However, these materials exhibit comparatively lower charge carrier mobility and higher contact resistance than 3D semiconductors, making it challenging to realize high-performance devices at scale. In this work, we search for high-mobility 2D materials by combining a high-throughput screening strategy with state-of-the-art calculations based on the ab initio Boltzmann transport equation. Our analysis singles out a known transition metal dichalcogenide, monolayer WS 2 , as the most promising 2D semiconductor, with the potential to reach ultra-high room-temperature hole mobilities in excess of 1300 cm 2 /Vs should Ohmic contacts and low defect densities be achieved. Our work also highlights the importance of performing full-blown ab initio transport calculations to achieve predictive accuracy, including spin–orbital couplings, quasiparticle corrections, dipole and quadrupole long-range electron–phonon interactions, as well as scattering by point defects and extended defects.

Chemistry↗

Difficulties with late-time solutions for the Hubble tension

We explore the notion that cosmological models that modify the late-time expansion history cannot simultaneously fit the SH0ES Collaboration’s measurements of the Hubble constant, Dark Energy Spectroscopic Instrument baryon acoustic oscillations data, and type Ia supernova distances. Adopting a few simple phenomenological models, we quantitatively demonstrate that a satisfactory fit with a model with late-time expansion history can only be achieved if one of the following is true: (1) there is a sharp step in the absolute magnitude of type Ia supernovae at very low redshift, 𝑧 ∼0.01, or (2) the distance duality relation, 𝑑 𝐿 ⁡(𝑧) =(1+𝑧) 2 ⁢𝑑 𝐴 ⁡(𝑧), is broken. Both solutions are trivial in that they effectively decouple the calibrated type Ia supernovae measurements from other data, and this qualitatively agrees with previous work built on studying specific dark-energy models. We also identify a less effective class of late-time solutions with a transition at 𝑧 ≃0.15 that lead to a more modest improvement in fit to the data than models with a very low-𝑧 transition. Our conclusions are largely unchanged when we include surface brightness fluctuation distance measurements, with their current systematic uncertainties, to our analysis. Here, we finally illustrate our findings by studying a physical model which, when equipped with the ability to smoothly change the absolute magnitude of type Ia supernovae, partially resolves the Hubble tension.

Cosmological parameters↗

On the theory of polarization radiation in media with sharp boundaries

Polarization radiation generated when a point charge moves uniformly along a straight line in vacuum in the vicinity of media with a finite permittivity {epsilon}({omega}) = {epsilon} Prime + i{epsilon} Double-Prime and sharp boundaries is considered. A method is developed in which polarization radiation is represented as the field of the current induced in the substance by the field of the moving charge. The solution to the problem of radiation induced when a charge moves along the axis of a cylindrical vacuum channel in a thin screen with a finite radius and a finite permittivity is obtained. Depending on the parameters of the problem, this solution describes various types of radiation (Cherenkov, transition, and diffraction radiation). In particular, when the channel radius tends to zero and the outer radius of the screen tends to infinity, the expression derived for the emitted energy coincides with the known solution for transition radiation in a plate. In another particular case of ideal conductivity ({epsilon} Double-Prime {yields} {infinity}), the relevant formula coincides with the known results for diffraction radiation from a circular aperture in an infinitely thin screen. The solution is obtained to the problem of radiation generated when the charge flies near a thin rectangular screen with a finite permittivity. This solution describes the diffraction and Cherenkov mechanisms of radiation and takes into account possible multiple re-reflections of radiation in the screen. The solution to the problem of radiation generated when a particles flies near a thin grating consisting of a finite number of strips having a rectangular cross section and a finite permittivity and separated by vacuum gaps (Smith-Purcell radiation) is also obtained. In the special case of ideal conductivity, the expression derived for the emitted energy coincides with the known result in the model of surface currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

AC Magnetic Susceptibility of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} Substituted by Nd{sup 3+} and Ca{sup 2+} Ions

Effect of Nd{sup 3+} and Ca{sup 2+} ion substitutions in Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} (Y-358) was studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), electrical resistivity, and ac magnetic susceptibility measurements. Superconducting samples of type Y{sub 3 − x}Nd{sub x}Ba{sub 5 − y}Ca{sub y}Cu{sub 8}O{sub 18} (with 0 ≤ x, y ≤ 0.4) were synthesized by the standard solid-state reaction technique. XRD patterns revealed that all the samples were mainly composed of Y-358 phase with orthorhombic structure. SEM micrographs showed that Nd{sup 3+} and Ca{sup 2+} ion substitutions had the ability to alter the grain morphology of Y-358 to irregular randomly oriented grains with smaller average grain sizes. The temperature-dependent electrical resistivity curves indicated that the superconducting transition temperature T{sub c} was decreased from 96.51 to 87.41 K as the substitution contents were increased from 0 to 0.4. Detailed AC magnetic susceptibility measurements were done using a quantum design physical property measurement system (PPMS) at different dc fields (B = 0.5–20 kG) and frequency of 1 kHz. A comparison between electrical resistivity and AC magnetic susceptibility data was performed. It was found that T{sub cs} obtained from AC magnetic susceptibility were much lower than those obtained from the resistivity measurements, for all studied samples. This was discussed in terms of filamentary paths that could produce sharp pronounced drops in diamagnetism. Generally, the depression in T{sub c} was attributed to the decrease in relative volume fraction of Y-358 or due to trapping of mobile holes or other mechanism connected with oxygen vacancy disorder. Werthamer–Helfand–Hohenberg (WHH) theory was employed to study the temperature dependence of the upper critical magnetic field B{sub c2}(T) for the samples. The relative importance of both orbital and paramagnetic effects in the suppression of superconductivity was described with the aid of Maki parameter (κ{sub M}). The estimated values of the upper critical magnetic field at 0 K, B{sub c2}(0), were found to decrease from 37.3 to 13.5 T as Nd{sup 3+} and Ca{sup 2+} contents were increased from 0 to 0.4. This decrement was attributed to the weak electron–phonon coupling and to the orbital as well as spin pair breaking mechanisms. Furthermore, Ginzburg–Landau coherence length ξ{sub GL} of Y{sub 3 − x}Nd{sub x}Ba{sub 5 − y}Ca{sub y}Cu{sub 8}O{sub 18} was found to increase with the increase of the Nd{sup 3+} and Ca{sup 2+} contents. Therefore, Nd{sup 3+} and Ca{sup 2+} ions play an important role in the pair-breaking mechanism and in suppressing superconductivity of the Y-358 phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ULTRA-SHARP solution of the Smith-Hutton problem

Highly convective scalar transport involving near-discontinuities and strong streamline curvature was addressed in a paper by Smith and Hutton in 1982, comparing several different convection schemes applied to a specially devised test problem. First order methods showed significant artificial diffusion, whereas higher order methods gave less smearing but had a tendency to overshoot and oscillate. Perhaps because unphysical oscillations are more obvious than unphysical smearing, the intervening period has seen a rise in popularity of low order artificially diffusive schemes, especially in the numerical heat transfer industry. The present paper describes an alternate strategy of using non-artificially diffusive high order methods, while maintaining strictly monotonic transitions through the use of simple flux limited constraints. Limited third order upwinding is usually found to be the most cost effective basic convection scheme. Tighter resolution of discontinuities can be obtained at little additional cost by using automatic adaptive stencil expansion to higher order in local regions, as needed.

Leonard, B. P.↗

THE LINK BETWEEN THE HIDDEN BROAD LINE REGION AND THE ACCRETION RATE IN SEYFERT 2 GALAXIES

In the past few years, more and more pieces of evidence have been presented for a revision of the widely accepted unified model of active galactic nuclei. A model based solely on orientation cannot explain all the observed phenomenology. In the following, we will present evidence that accretion rate is also a key parameter for the presence of hidden broad line regions (HBLRs) in Seyfert 2 galaxies. Our sample consists of 21 sources with polarized hidden broad lines and 18 sources without hidden broad lines. We use stellar velocity dispersions from several studies on the Ca II and Mg b triplets in Seyfert 2 galaxies to estimate the mass of the central black holes via the M{sub BH}-{sigma}{sub *} relation. The ratio between the bolometric luminosity, derived from the intrinsic (i.e., unabsorbed) X-ray luminosity, and the Eddington luminosity is a measure of the rate at which matter accretes onto the central supermassive black hole. A separation between Compton-thin HBLR and non-HBLR sources is clear, both in accretion rate (log L{sub bol}/L{sub Edd} = -1.9) and in luminosity (log L{sub bol} = 43.90). When properly luminosity-corrected Compton-thick sources are included, the separation between HBLR and non-HBLR is less sharp but no HBLR source falls below the Eddington ratio threshold. We speculate that non-HBLR Compton-thick sources with accretion rate higher than the threshold do possess a BLR, but something, probably related to their heavy absorption, is preventing us from observing it even in polarized light. Our results for Compton-thin sources support theoretical expectations. In a model presented by Nicastro, the presence of broad emission lines is intrinsically connected with disk instabilities occurring in proximity of a transition radius, which is a function of the accretion rate, becoming smaller than the innermost stable orbit for very low accretion rates and therefore luminosities.

79 ASTRONOMY AND ASTROPHYSICS↗

An experimental study of the Richtmyer-Meshkov instability in microgravity

Richtmyer-Meshkov (RM) instability occurs when a planar interface separating two fluids of different density is impulsively accelerated in the direction of its normal. It is one of the most fundamental fluid instabilities and is of importance to the fields of astrophysics and inertial confinement fusion. Because RM instability experiments are normally carried out in shock tubes, where the generation of a sharp, well-controlled interface between gases is difficult, there is a scarcity of good experimental results. The experiments presented here use a novel technique that circumvents many of the experimental difficulties that have previously limited the study of RM instability in shock tubes. In these experiments, the instability is generated incompressibly, by bouncing a rectangular tank containing two liquids off of a fixed spring. These experiments, which utilize PLIF flow visualization, yield time-motion image sequences of the nonlinear development and transition to turbulence of the instability that are of a quality unattainable in shock tube experiments. Measurements obtained from these images, therefore, provide benchmark data for the evaluation of nonlinear models for the late-time growth of the instability. Because the run time in these experiments is limited, new experiments in the NASA Glenn 2.2 second drop tower, capable of achieving longer run times, are currently under way.

Rheology/methods↗

Nanoscale-correlated octahedral rotations in BaZrO 3

BaZrO 3 is reportedly one of few perovskites that retains an ideal cubic structure down to zero Kelvin even though its ground state as predicted by first-principles calculations has remained contentious. Here, we combine electron diffraction with total neutron scattering measured on ceramic samples at cryogenic temperatures to demonstrate that below 80 K, this compound undergoes a structural change associated with the onset of correlated out-of-phase rotations of [ZrO 6 ] octahedra. Here, the change is manifested in the appearance of weak but relatively sharp superlattice reflections at ½hkl (h, k, l = odd), which are readily detectable by electron diffraction. Atomistic structural refinements from the total neutron scattering data confirmed that these reflections are associated with octahedral tilting. The observed rotations are consistent with the a 0 a 0 c - type and feature a coherence length of about 3 nm. The average structure of BaZrO 3 , as seen by Bragg diffraction, remains cubic. According to the electron diffraction data, Nb-doped BaZrO 3 undergoes a similar structural transition but in this case, the tilting couldn't be recovered from the neutron scattering, suggesting that the distortions are smaller compared to those in the pure compound.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dawn-dusk asymmetries in the low-latitude boundary layer arising from the Kelvin-Helmholtz instability: A particle simulation

Along the low-latitude boundary layer (LLBL), the Kelvin-Helmholtz (K-H) instability can provide a means for injection of solar wind plasma across closed field lines of the magnetosphere. A fully electromagnetic, two-dimensional (three-velocity) particle code is used to investigate dawn-dusk asymmetries that can arise from velocity differences due to gradient drifts and electric field gradients, and ion acceleration across the narrow field transition layers in the dawn and dusk flanks. The model includes the dawn and dusk sides of the LLBL simultaneously in a slab geometry, incorporating seperate populations of ions and electrons for the magnetosphere and the magnetosheath plasmas. We report several effects: (1) asymmetries in the observed morphology of the turbulent structures, with familiar fluidlike vortex formation on the duskside, but tongues of magnetosheath plasma penetrating into the magnetosphere on the dawnside; (2) the formation of discrete current layers, characterized by strong currents and sharp gradients in the magnetic field, and discrete charge layers, having net charges and constant, weaker currents; (3) increasing asymmetry in dawn/dusk behavior with a decrease of initial currents; (3) increasing asymmetry in dawn/dusk behavior with a decrease of initial boundary layer width; and (4) enhancement of the dawn-to-dusk electric field as magnetosheath particles and momenta are transported across the magnetopause.

Wilber, M.↗

Accurate VUV Laboratory Measurements of Fe III Transitions for Astrophysical Applications

We report preliminary measurements of Fe III spectra in the 1150 to 2500 A wavelength interval. Spectra have been recorded with an iron-neon Penning discharge lamp (PDL) between 1600 and 2500 A at Imperial College (IC) using high resolution Fourier (FT) transform spectroscopy. These FT spectrometer measurements were extended beyond 1600 A to 1150 A using high-resolution grating spectroscopy at the National Institute of Standards and Technology (NIST). These recorded spectra represent the first radiometrically calibrated measurements of a doubly-ionized iron-group element spectrum combining the techniques of vacuum ultraviolet FT and grating spectroscopy. The spectral range of the new laboratory measurements corresponds to recent HST/STIS observations of sharp-lined B stars and of Eta Carinae. The new improved atomic data can be applied to abundance studies and diagnostics of astrophysical plasmas.

Blackwell-Whitehead, R. J.↗

MIRECLE Mid InfraRed Exoplanet CLimate Explorer: Exploring M-Earths with Ultra-Stable Mid-IR Transit and Phase-Curve Spectroscopy

We propose a high precision calibration scheme for a Mid-IR Exoplanet Spectrometer. This new technology will enable high-precision transmission, emission, and phase curve spectroscopy for the characterization of exoplanets in and near the habitable zone, enabling the detection of biosignatures in rocky planets around the nearest M dwarfs.

Staguhn, Johannes↗

Dielectric function and optical properties of quaternary AlInGaN alloys

The optical properties of quaternary Al{sub x}In{sub y}Ga{sub 1-x-y}N alloy films with 0.16<x<0.64 and 0.02<y<0.13 are presented. The (0001)-oriented AlInGaN layers were grown by metal-organic vapor phase epitaxy on thick GaN/sapphire templates. High-resolution x-ray diffraction measurements revealed the pseudomorphic growth of the AlInGaN films on the GaN buffer. Rutherford backscattering and wavelength-dispersive x-ray spectroscopy analysis were used in order to determine the composition of the alloys. The ordinary dielectric function (DF) of the AlInGaN samples was determined in the range of 1-10 eV by spectroscopic ellipsometry (SE) at room temperature (synchrotron radiation: BESSY II). The sharp onset of the imaginary part of the DF defines the direct absorption edge of the alloys. At higher photon energies, pronounced peaks are observed in the DF indicating a promising optical quality of the material. These features are correlated to the critical points of the band structure (van Hove singularities). An analytical model, which permits us to accurately describe the dielectric function (or optical constants) in the range of 1-10 eV, is also presented. The band-gap and high-energy interband transition values are obtained by fitting the experimental DF with the analytical model. The strain influence on the bandgap is evaluated by using the kxp formalism. Furthermore, an empirical expression is proposed which allows us to calculate the AlInGaN band-gap and high-energy inter-band transitions in the whole compositional range (x, y). The band-gap values obtained from the empirical expression are in good agreement with both the calculated ab initio and the experimental values determined by SE.

36 MATERIALS SCIENCE↗

The onset of ion heating during magnetic reconnection with a strong guide field

The onset of the acceleration of ions during magnetic reconnection is explored via particle-in-cell simulations in the limit of a strong ambient guide field that self-consistently and simultaneously follow the motions of protons and α particles. Heating parallel to the local magnetic field during reconnection with a guide field is strongly reduced compared with the reconnection of anti-parallel magnetic fields. The dominant heating of thermal ions during guide field reconnection results from pickup behavior of ions during their entry into reconnection exhausts and dominantly produces heating perpendicular rather than parallel to the local magnetic field. Pickup behavior requires that the ion transit time across the exhaust boundary (with a transverse scale of the order of the ion sound Larmor radius) be short compared with the ion cyclotron period. This translates into a threshold in the strength of reconnecting magnetic field that favors the heating of ions with high mass-to-charge. A simulation with a broad initial current layer produces a reconnecting system in which the amplitude of the reconnecting magnetic field just upstream of the dissipation region increases with time as reconnection proceeds. The sharp onset of perpendicular heating when the pickup threshold is crossed is documented. A comparison of the time variation of the parallel and perpendicular ion heating with that predicted based on the strength of the reconnecting field establishes the scaling of ion heating with ambient parameters both below and above the pickup threshold. The relevance to observations of ion heating in the solar corona is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Surface structures of In-Pd intermetallic compounds. I. Experimental study of In thin films on Pd(111) and alloy formation

A combination of experimental methods was used to study the structure of In thin films deposited on the Pd(111) surface and the alloying behavior. X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED), and scanning tunneling microscopy results indicate that surface alloying takes place at room temperature. Below 2 monolayer equivalents (MLEs), the LEED patterns show the formation of three rotational domains of InPd(110) of poor structural quality on top of the Pd(111) substrate. Both core-levels and valence band XPS spectra show that the surface alloy does not yet exhibit the electronic structure characteristic of the 1:1 intermetallic compound under these conditions. Annealing the 1 MLE thin film up to 690 K yields to a transition from a multilayer InPd near-surface intermetallic phase to a monolayer-like surface alloy exhibiting a well ordered (√(3)×√(3)) R30{sup ∘} superstructure and an estimated composition close to In{sub 2}Pd{sub 3}. Annealing above 690 K leads to further In depletion and a (1 × 1) pattern is recovered. The (√(3)×√(3)) R30{sup ∘} superstructure is not observed for thicker films. Successive annealing of the 2 MLE thin film leads the progressive disappearance of the InPd diffraction spots till a sharp (1 × 1) pattern is recovered above 690 K. In the high coverage regime (from 4 to 35 MLE), the formation of three rotational domains of a bcc-In{sub 7}Pd{sub 3} compound with (110) orientation is observed. This In-rich phase probably grows on top of interfacial InPd(110) domains and is metastable. It transforms into a pure InPd(110) near-surface intermetallic phase in a temperature range between 500 and 600 K depending on the initial coverage. At this stage, the surface alloy exhibits core-level chemical shifts and valence band (VB) spectra identical to those of the 1:1 InPd intermetallic compound and resembling Cu-like density of states. Annealing at higher temperatures yields to a decrease of the In concentration in the near-surface region to about 20 at.% and a (1 × 1) LEED pattern is recovered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗