Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface layering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

HYDROCARBON EMISSION RINGS IN PROTOPLANETARY DISKS INDUCED BY DUST EVOLUTION

We report observations of resolved C{sub 2}H emission rings within the gas-rich protoplanetary disks of TW Hya and DM Tau using the Atacama Large Millimeter Array. In each case the emission ring is found to arise at the edge of the observable disk of millimeter-sized grains (pebbles) traced by submillimeter-wave continuum emission. In addition, we detect a C{sub 3}H{sub 2} emission ring with an identical spatial distribution to C{sub 2}H in the TW Hya disk. This suggests that these are hydrocarbon rings (i.e., not limited to C{sub 2}H). Using a detailed thermo-chemical model we show that reproducing the emission from C{sub 2}H requires a strong UV field and C/O > 1 in the upper disk atmosphere and outer disk, beyond the edge of the pebble disk. This naturally arises in a disk where the ice-coated dust mass is spatially stratified due to the combined effects of coagulation, gravitational settling and drift. This stratification causes the disk surface and outer disk to have a greater permeability to UV photons. Furthermore the concentration of ices that transport key volatile carriers of oxygen and carbon in the midplane, along with photochemical erosion of CO, leads to an elemental C/O ratio that exceeds unity in the UV-dominated disk. Thus the motions of the grains, and not the gas, lead to a rich hydrocarbon chemistry in disk surface layers and in the outer disk midplane.

79 ASTRONOMY AND ASTROPHYSICS↗

The surface structure of titanium and its interaction with bromine and chlorine

The surface structure and composition of titanium have been studied by electron diffraction and Auger electron spectroscopy in the temperature range 25 to 850 C. Atomically clean, well-defined Ti surfaces were obtained by a combination of argon ion sputtering and thermal treatment at 700 to 800 C. A series of surface superstructures was observed as the crystal temperature was gradually decreased. The development of the superstructures is best explained as due to surface reconstruction as a result of surface relaxation. The interaction of bromine and chlorine vapors with clean Ti surfaces was investigated in the temperature range 25 to 500 C. Bromine exposure at room temperature gave rise to an amorphous surface layer, which on annealing transformed into an epitaxial TiBr2 structure. Chlorine interaction resulted in the formation of an epitaxial TiCl3 on both cold and hot Ti surfaces. Surface impurities inhibited the chemical interaction process on the Ti surface.

Khan, I. H.↗

Simulation and study of the influence of the buffer intrinsic layer, back-surface field, densities of interface defects, resistivity of p-type silicon substrate and transparent conductive oxide on heterojunction with intrinsic thin-layer (HIT) solar cell

The influence of various parameters such as buffer intrinsic layers, back-surface fields, densities of interface defects (D{sub it}), the resistivity of p-type silicon substrates ({rho}) and then work function of transparent conductive oxide ({phi}{sub TCO}) on heterojunction with intrinsic thin-layer (HIT) solar cell performance was investigated using software simulation. Automat for the simulation of heterostructures (AFORS-HET) software was used for that purpose. Our results indicate that band bending, which is determined by the band offsets at the buffer intrinsic/c-Si and/or the c-Si/back-surface field heterointerface, could be critical to solar cell performance. The effect of band bending on solar cell performance and the dependence of cell performance on {rho} and {phi}{sub TCO} were investigated in detail. Eventually, suggestive design parameters for HIT solar cell fabrication are proposed. (author)

14 SOLAR ENERGY↗

Dislocation model of nucleation and development of slip bands and their effect on service life of structural materials subject to cyclic loading

Most of the destructions of machine parts are of fatigue character. Under cyclic loading, the surface layer, in which hardening–softening processes rapidly occur, is formed almost at once after its beginning. The interaction of plastic-deformation traces with each other and with other structural elements, such as grains, results in the formation of a characteristic microstructure of the machine-part surface subject to cyclic loadings. The character of accumulation of slip bands and their shape (narrow, wide, twisting, and broken) depends on the conditions under which (under what factors) the cyclic loading occurs. The fatigue-resistance index expressed in terms of the slope of left portion of the fatigue curve linearized in logarithmic coordinates also depends on the set of relevant factors. The dependence of the surface damageability on the fatigue resistance index makes it possible to implement the method of predicting the fatigue curve by the description of the factors acting on a detail or construction. The position of the inflection point on the curve in the highcycle fatigue region (the endurance limit and the number of loading cycles, the ordinate and abscissa of the inflection point on the fatigue curve, respectively) also depends on the set of relevant factors. In combination with the previously obtained value of the slope of the left portion of the curve in the high-cycle fatigue region, this makes it possible to construct an a priori fatigue curve, thus reducing the scope of required fatigue tests and, hence, high expenses because of their long duration and high cost. The scope of tests upon using the developed method of prediction may be reduced to a minimum of one or two samples at the predicted level of the endurance limit.

36 MATERIALS SCIENCE↗

Engineering the S-Layer of Caulobacter crescentus as a Foundation for Stable, High-Density, 2D Living Materials

Materials synthesized by organisms, such as bones and wood, combine the ability to self-repair with remarkable mechanical properties. This multifunctionality arises from the presence of living cells within the material and hierarchical assembly of different components across nanometer to micron scales. While creating engineered analogs of these natural materials is of growing interest, our ability to hierarchically order materials using living cells largely relies on engineered 1D protein filaments. Here, we lay the foundations for bottom-up assembly of engineered living material composites in 2D along the cell body using a synthetic biology approach. We engineer the paracrystalline surface-layer (S-layer) of Caulobacter crescentus to display SpyTag peptides that form irreversible isopeptide bonds to SpyCatcher-modified proteins, nanocrystals, and biopolymers on the extracellular surface. Using flow cytometry and confocal microscopy, we show that attachment of these materials to the cell surface is uniform, specific, and covalent, and its density can be controlled based on the location of the insertion within the S-layer protein, RsaA. Furthermore, we leverage the irreversible nature of this attachment to demonstrate via SDS-PAGE that the engineered S-layer can display a high density of materials, reaching 1 attachment site per 288 nm 2 . Lastly, we show that ligation of quantum dots to the cell surface does not impair cell viability and this composite material remains intact over a period of two weeks. Taken together, this work provides a platform for self-organization of soft and hard nanomaterials on a cell surface with precise control over 2D density, composition, and stability of the resulting composite, and is a key step towards building hierarchically-ordered engineered living materials with emergent properties.

59 BASIC BIOLOGICAL SCIENCES↗

Effect of finite ion mass on relativistic self-induced transparency of plasma layers with a sharp boundary

We consider the effect of ion mobility on the threshold of relativistic self-induced transparency under irradiation of thin plasma layers by circularly polarised laser radiation. An analytical model of the motion of ions during the removal of electrons from the layer surface by the ponderomotive force of laser radiation is constructed. The model is used to analyse the motion of probe electrons in the resulting electromagnetic field. It is shown that the higher the ion mobility and the longer the laser pulse, the more stable the plasma layer to longitudinal perturbations of a finite value and the higher the threshold of self-induced transparency. These conclusions are verified by one-dimensional numerical simulation of a complete system of kinetic equations for plasma and Maxwell’s equations. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Density estimation techniques for multiscale coupling of kinetic models of the plasma material interface

In this work we analyze two classes of Density-Estimation techniques which can be used to consistently couple different kinetic models of the plasma-material interface, intended as the region of plasma immediately interacting with the first surface layers of a material wall. In particular, we handle the general problem of interfacing a continuum multi-species Vlasov-Poisson-BGK plasma model to discrete surface erosion models. The continuum model solves for the energy-angle distributions of the particles striking the surface, which are then driving the surface response. A modification to the classical Binary-Collision Approximation (BCA) method is here utilized as a prototype discrete model of the surface, to provide boundary conditions and impurity distributions representative of the material behavior during plasma irradiation. The numerical tests revealed the superior convergence properties of Gaussian Mixture Models over Kernel Density Estimation methods, with Gaussian Mixtures and Epanechnikov-KDEs both being up to two orders of magnitude faster than Gaussian-KDEs. The methodology here presented allows a self-consistent treatment of the plasma-material interface in magnetic fusion devices, including both the near-surface plasma (plasma sheath and presheath) in magnetized conditions, and surface effects such as sputtering, back-scattering, and ion implantation. The same coupling techniques can also be utilized for other discrete material models such as Molecular Dynamics.

42 ENGINEERING↗

Adsorption and thermal decomposition of electolytes on nanometer magnesium oxide: An in situ 13C MAS NMR study

Mg batteries have been proposed as potential alternatives to lithium ion batteries due to their lower cost, higher safety, and enhanced charge density. However, Mg metal readily oxidizes when exposed to an oxidizer to form a thin MgO passivation surface layer that blocks the transport of Mg2+ across the solid electrode-electrolyte interface (SEI). In this work, in situ high temperature 13C single pulse (SP) and surface sensitive 1H-13C cross polarization (CP) MAS NMR combined with quantum chemistry calculations were conducted on samples containing common electrolytes for Mg-batteries, i.e., diglyme (G2) + Magnesium(II) bis(trifluoromethane sulfonyl) imide (Mg(TFSI)2). At elevated temperatures, neat G2 decomposes to methoxy and adsorbs onto the MgO surface. G2 represent the major MgO adsorbed species or the 0.1 M Mg(TFSI)2 in G2 electrolyte while for 1.0 M Mg(TFSI)2 in G2, the major surface adsorbed species are G2-solvated Mg-TFSI contact ion pairs with the first shells containing 2 G2 molecules and the second shell containing either 0 or up to 6 G2. In particular, a desolvation of the Mg-TFSI contact ion pairs is evident on the MgO surface. These results show that the MgO surface species are directly related to the solvation structures in the electrolytes, offering fundamental insights into the formation mechanism of SEI.

magnesium battery, electrolytes, diglyme, Mg(TFSI)↗

Transport of energy by ultraintense laser-generated electrons in nail-wire targets

Nail-wire targets (20 {mu}m diameter copper wires with 80 {mu}m hemispherical head) were used to investigate energy transport by relativistic fast electrons generated in intense laser-plasma interactions. The targets were irradiated using the 300 J, 1 ps, and 2x10{sup 20} W{center_dot}cm{sup -2} Vulcan laser at the Rutherford Appleton Laboratory. A spherically bent crystal imager, a highly ordered pyrolytic graphite spectrometer, and single photon counting charge-coupled device gave absolute Cu K{alpha} measurements. Results show a concentration of energy deposition in the head and an approximately exponential fall-off along the wire with about 60 {mu}m 1/e decay length due to resistive inhibition. The coupling efficiency to the wire was 3.3{+-}1.7% with an average hot electron temperature of 620{+-}125 keV. Extreme ultraviolet images (68 and 256 eV) indicate additional heating of a thin surface layer of the wire. Modeling using the hybrid E-PLAS code has been compared with the experimental data, showing evidence of resistive heating, magnetic trapping, and surface transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Micrometeorological applications of a second-order closure model of turbulent transport

Recent applications of the turbulent transport model originally developed by Donaldson to some problems of practical importance in micrometeorology are discussed. Four particular examples considered are the local boundary layer gust front emanating from a thunderstorm; the low-level wind and turbulent distributions of a tornado; the transport of momentum, heat and species within a surface layer canopy, and longitudinal roll vortices in the unstable planetary boundary layer. Results for the last example are discussed in some detail. Comparisons are made between a one-dimensional and a two-dimensional computation of this phenomenon.

Lewellen, W. S.↗

Enceladus - Implications of its unusual photometric properties

Voyager 1 and 2 images are used to ascertain the photometric properties of Enceladus up to a 43-deg phase angle. The lack of correlation noted between spectrophotometric properties and terrain type indicates that optical characteristics result from a recently-deposited, ubiquitous surface layer that may have originated on the E-ring of Saturn. Enceladus' distinctive phase and photometric functions can be accounted for by the high degree of surface multiple scattering; observations to date indicate that the Enceladus regolith's textural characteristics are similar to those of other icy satellites of Saturn.

Buratti, Bonnie J.↗

The physics of grain-grain collisions and gas-grain sputtering in interstellar shocks

Grain-grain collisions and ion sputtering destroy dust grains in interstellar shocks. An analytical theory is developed for the propagation of shock waves in solids driven by grain-grain collisions, which compares very favorably with detailed numerical calculations. This theory is used to determine the fraction of grain vaporized by a grain-grain collision. Our results predict much less vaporization of colliding grains in interstellar shocks than previous estimates. This theory can also be used to determine the fraction of a colliding grain that melts, shatter, or undergoes a phase transformation to a higher density phase. In particular, the latter two processes can be much more important in interstellar shocks than vaporization. The sputtering of grains by impacting gas ions is reanalyzed based upon extensive laboratory studies and a theoretically derived 'universal'sputtering relation. The analytical results are compared to available experimental studies of sputtering of graphite/amorphous carbon, SiO2, SiC, Fe, and H2O. Sputtering yields for astrophysically relevant materials as a function of impact energy and ion mass are derived. These yields are also averaged over thermal impact spectrum and simple polynomial fits to the resulting yields as a function of temperature are presented. The derived sputtering yields are similar to those adopted in previous studies, except for graphite near threshold where the new yields are much larger due to a lower adopted binding energy. The ion bombardment will amorphitize the surface layers of interstellar grains. It will also convert graphite into hydrogenated amorphous carbon (HAC) to a depth of 10-20 A. It is suggested that these HAC surfaces are the carriers of the 3.4 micrometer absorption feature in the interstellar medium.

Tielens, A. G. G. M.↗

Geosat Data Assimilation with Application to the Eastern North Atlantic

An attempt is made to determine the three-dimensional ocean circulation from satellite altimeter measurements by assimilating Geosat sea surface height data into an eddy-resolving QuasiGeostrophic (QG) model of the eastern North Atlantic Ocean. Results are tested against independent information from hydrographic field observations and moored current meter data collected during the Geosat ERM. The comparison supports the concept of inferring aspects of the three-dimensional flow field from sea surface height observations by combining altimetric measurements with the dynamics of ocean circulation models. A Holland-type QG model with open boundaries is set up on a 2000 km X 2000 km domain of the eastern North Atlantic between 25 deg. and 45 deg. N, 32 deg. and 8 deg. W. By using a simple nudging technique, about two years of Geosat altimeter data are assimilated into the model every five days as space-time objective analyses on the model grid. The error information resulting from the analysis is used during the assimilation procedure to account for data uncertainties. Results show an intense eddy field, which in the surface layer interacts with a meandering Azores Front. Compared to Geosat, the model leads to smoothed fields that follow the observations. Model simulations are significantly correlated with hydrographic data from March 1988 and June 1989, both close to the surface and in the subsurface. Good agreement is also found between the model velocity fields and moored current meter data in the top two model layers. The agreement is visually weak in the bottom layer, although a coherence analysis reveals an agreement between the model simulation and current meter data over the full water column at periods exceeding 80 days.

Stammer, Detlef↗

Prepared σ-MnO{sub 2} thin films by chemical bath deposition methods and study of its optical and microstructure properties

In this work, σ-MnO{sub 2} thin films deposited by chemical bath deposition method at three concentration of solution. The influence of concentration on thickness, micromorphology and optical parameters were investigated by XRD, SEM, UV–Vis spectrophotometer, atomic force microscopic and multifractal analyses. The optical band gap of thin films is decreased with increase in concentration. The optical parameters: refractive index and real part of dielectric constant are increased with increase in concentration, but decrease in extinction coefficient and imaginary parts of dielectric constant are observed. The micromorphology and roughness of layers surface are changed as function of concentration. The studied samples have multifractal properties and can be included in computer algorithms useful for graphical representation of 3-D microtexture surfaces of σ-MnO{sub 2} thin films.

36 MATERIALS SCIENCE↗

Depth-dependent links between microbial taxa and nitrous oxide emissions in a long-term cotton cropping system employing soil health practices

Long-term management practices can shape soil microbial communities in ways that influence nitrogen (N) dynamics and nitrous oxide (N 2 O) emissions. We leverage a 41-year continuous cotton cropping experiment with contrasting tillage, cover cropping, and N fertilization regimes to investigate how these long-term strategies influence soil microbial communities and their associations with N 2 O fluxes during the cotton growing season. Using 16S rRNA gene metabarcoding, we assessed microbial composition in surface and subsurface soils and evaluated its relationship with temporal N 2 O emissions. Among the management practices, N fertilization – a known driver of N 2 O emissions – had the strongest effect on microbial community composition and was linked to a greater number of taxa correlated to N 2 O emissions, particularly in surface soils. Soil pH emerged as a key variable influencing microbial structure across depth and was negatively associated with both N 2 O emissions and microbial composition in the surface layers of fertilized soils. In total, 57 archaeal/bacterial taxa were correlated with N 2 O fluxes, but only seven were shared across depths, suggesting distinct microbial contributors in surface and subsurface soils. Several of these taxa have been previously reported to be associated with N and C cycling processes such as nitrate respiration or carbon turnover, indicating functional context to their correlation with N 2 O fluxes. Temporal shifts in the abundance of key taxa aligned with seasonal peaks in N 2 O emissions, notably in early and late August, and were most pronounced under conventional tillage, hairy vetch cover cropping, and N fertilization. While 16S-based associations cannot confirm functional gene presence or activity, these findings demonstrate that long-term fertilization and associated soil acidification are dominant drivers of microbial shifts linked to N 2 O emissions and highlight the importance of accounting for depth-specific and seasonal microbial dynamics when evaluating management impacts on greenhouse gas emissions.

16S rRNA gene sequencing↗

Surface plasmon resonance assisted rapid laser joining of glass

Rapid and strong joining of clear glass to glass containing randomly distributed embedded spherical silver nanoparticles upon nanosecond pulsed laser irradiation (∼40 ns and repetition rate of 100 kHz) at 532 nm is demonstrated. The embedded silver nanoparticles were ∼30–40 nm in diameter, contained in a thin surface layer of ∼10 μm. A joint strength of 12.5 MPa was achieved for a laser fluence of only ∼0.13 J/cm{sup 2} and scanning speed of 10 mm/s. The bonding mechanism is discussed in terms of absorption of the laser energy by nanoparticles and the transfer of the accumulated localised heat to the surrounding glass leading to the local melting and formation of a strong bond. The presented technique is scalable and overcomes a number of serious challenges for a widespread adoption of laser-assisted rapid joining of glass substrates, enabling applications in the manufacture of microelectronic devices, sensors, micro-fluidic, and medical devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic layer deposition of Al-doped ZnO films using ozone as the oxygen source: A comparison of two methods to deliver aluminum

Aluminum-doped ZnO films were prepared by atomic layer deposition at 250 deg. C using diethylzinc (DEZ), trimethylaluminum (TMA), and ozone as the precursors. Two deposition methods were compared to assess their impact on the composition, structural, electrical, and optical properties as a function of Al concentration. The first method controlled the Al concentration by changing the relative number of Al to Zn deposition cycles; a process reported in the literature where water was used as the oxygen source. The second method involved coinjection of the DEZ and TMA during each cycle where the partial pressures of the precursors control the aluminum concentration. Depth profiles of the film composition using Auger electron spectroscopy confirmed a layered microstructure for the films prepared by the first method, whereas the second method led to a homogeneous distribution of the aluminum throughout the ZnO film. Beneath the surface layer the carbon concentrations for all of the films were below the detection limit. Comparison of their electrical and optical properties established that films deposited by coinjection of the precursors were superior.

36 MATERIALS SCIENCE↗

Surface analysis of space telescope material specimens

Surface analysis by electron spectroscopy for chemical analysis (ESCA) was used to characterize a number of the material samples for the space telescope. With ESCA, the sample is irradiated with monoenergetic soft X-rays and the resulting emitted electrons are energy analyzed to determine the binding energy of electrons to the surface atoms. The major peaks were used in the quantitative determination of the surface composition. The presence of trace elements (impurities below 1% atomic composition) was also detailed. Initially a survey scan was run for each sample to deduce the elemental composition. Then the major peaks of interest and those of the trace elements were individually examined. After this, the samples were argon sputtered to etch away surface layers, and then additional measurements were carried out in order to obtain depth profile information. In this way it was possible for those species present only on the surface to be distinguished from those having a significant depth distribution within the sample.

Fromhold, A. T.↗