Search NASA⌕ Search

SEARCH · Search NASA

Results for “vortex generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65

Preliminary identification of buffet problems in high speed civil transport

In the present study, some effort is made to identify whether empennage buffet is a relevant factor in the design and operation of the High Speed Civil Transport (HSCT). Based on some results of the only operational supersonic transport, Concorde and the innumerable studies that exist on the tail buffet of high performance airplanes, CFD analyses on the HSCT as well as low speed wind tunnel tests on models, it appears as though buffet will be a factor that needs attention in the proper design of empennage structure. Utilizing the existing empirical relation between the reduced frequency of the leading edge vortices and the geometric parameters, it is estimated that the characteristic frequencies of the vortices from the wing cranks are in the range of certain fundamental frequencies of the wing-fuselage-empennage structure. Buffet is believed to be critical during take-off, climb, descent and landing. Computational and experimental data available in open literature indicate coherent vortex flow structure in the empennage region at supersonic cruise speeds. This raises further concern on the fatigue life of the empennage structure. Three second generation supersonic transport designs taken from open literature are briefly compared with the 'empennage buffet' in mind. Future research efforts relating to buffet studies on the HSCT are summarized. A bibliography pertaining to the present research, including relevant studies on the first generation supersonic transport is presented. The effect of rounded wing leading edges on the present frequency estimates needs further study. The effect of engine exhaust on the flow field in the empennage region also needs further study.

Ravindra, Krishnaswamy↗

Quantification of flexoelectricity in PbTiO 3 /SrTiO 3 superlattice polar vortices using machine learning and phase-field modeling

Flexoelectricity refers to electric polarization generated by heterogeneous mechanical strains, namely strain gradients, in materials of arbitrary crystal symmetries. Despite more than 50 years of work on this effect, an accurate identification of its coupling strength remains an experimental challenge for most materials, which impedes its wide recognition. Here, we show the presence of flexoelectricity in the recently discovered polar vortices in PbTiO 3 /SrTiO 3 superlattices based on a combination of machine-learning analysis of the atomic-scale electron microscopy imaging data and phenomenological phase-field modeling. By scrutinizing the influence of flexocoupling on the global vortex structure, we match theory and experiment using computer vision methodologies to determine the flexoelectric coefficients for PbTiO 3 and SrTiO 3 . Here, our findings highlight the inherent, nontrivial role of flexoelectricity in the generation of emergent complex polarization morphologies and demonstrate a viable approach to delineating this effect, conducive to the deeper exploration of both topics.

36 MATERIALS SCIENCE↗

Efficacy of vibro-impact energy harvesting absorbers on controlling dynamical systems under vortex-induced vibrations and base excitation

Here this study investigates improving the efficacy of an energy harvesting absorber's ability to control a structure under vortex-induced vibrations, base excitation, and a combination of the two by including mechanical amplitude stoppers. The nonlinear reduced-order model is developed through modifying trilinear spring models to represent the impact forces, a modified van der Pol oscillator to represent the forcing due to the vortex-induced vibrations and using the Euler-Lagrange principle to express the equations of motion. It is seen that a soft stopper stiffness and a 5mm gap performs the most effectively of increasing the power generated from the absorber while still greatly reducing the primary structure's amplitude. By changing the stopper's location towards the middle of the energy harvesting absorber, the large effects of the impact forces are reduced and improves the efficacy of medium and hard stopper stiffnesses to generate near the amount of power the soft stopper does, while greatly improving the control of the primary structure. When the system is under combined loadings, the large oscillations of the synchronization region cause the effective configuration to be that of a 27.5 mm gap with soft stiffnesses. The results shows that medium stiffness stoppers with small gaps generate large aperiodic regions due to the high impact force. When the oscillations are close to the stoppers, the beating phenomenon is observed and is not overpowered by the vibro-impact force.

16 TIDAL AND WAVE POWER↗

An optical tweezer in asymmetrical vortex Bessel-Gaussian beams

We study an optical micromanipulation that comprises trapping, rotating, and transporting 5-μm polystyrene microbeads in asymmetric Bessel-Gaussian (BG) laser beams. The beams that carry orbital angular momentum are generated by means of a liquid crystal microdisplay and focused by a microobjective with a numerical aperture of NA = 0.85. We experimentally show that given a constant topological charge, the rate of microparticle motion increases near linearly with increasing asymmetry of the BG beam. Asymmetric BG beams can be used instead of conventional Gaussian beam for trapping and transferring live cells without thermal damage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The structure of trailing vortices generated by model rotor blades

Hot-wire anemometry to analyze the structure and geometry of rotary wing trailing vortices is studied. Tests cover a range of aspect ratios and blade twist. For all configurations, measured vortex strength correlates well with maximum blade-bound circulation. Measurements of wake geometry are in agreement with classical data for high-aspect ratios. The detailed vortex structure is similar to that found for fixed wings and consists of four well defined regions--a viscous core, a turbulent mixing region, a merging region, and an inviscid outer region. A single set of empirical formulas for the entire set of test data is described.

Tung, C.↗

Fast chirality reversal of the magnetic vortex by electric current

The possibility of high-density information encoding in magnetic materials by topologically stable inhomogeneous magnetization configurations such as domain walls, skyrmions, and vortices has motivated intense research into mechanisms enabling their control and detection. While the uniform magnetization states can be efficiently controlled by electric current using magnetic multilayer structures, this approach has proven much more difficult to implement for inhomogeneous states. Here, we report direct observation of fast reversal of magnetic vortex by electric current in a simple planar structure based on a bilayer of spin Hall material Pt with a single microscopic ferromagnetic disk contacted by asymmetric electrodes. The reversal is enabled by a combination of the chiral Oersted field and spin current generated by the nonuniform current distribution in Pt. Our results provide a route for the efficient control of inhomogeneous magnetization configurations by electric current.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational Aeroacoustic Analysis System Development

Many industrial and commercial products operate in a dynamic flow environment and the aerodynamically generated noise has become a very important factor in the design of these products. In light of the importance in characterizing this dynamic environment, Rocketdyne has initiated a multiyear effort to develop an advanced general-purpose Computational Aeroacoustic Analysis System (CAAS) to address these issues. This system will provide a high fidelity predictive capability for aeroacoustic design and analysis. The numerical platform is able to provide high temporal and spatial accuracy that is required for aeroacoustic calculations through the development of a high order spectral element numerical algorithm. The analysis system is integrated with well-established CAE tools, such as a graphical user interface (GUI) through PATRAN, to provide cost-effective access to all of the necessary tools. These include preprocessing (geometry import, grid generation and boundary condition specification), code set up (problem specification, user parameter definition, etc.), and postprocessing. The purpose of the present paper is to assess the feasibility of such a system and to demonstrate the efficiency and accuracy of the numerical algorithm through numerical examples. Computations of vortex shedding noise were carried out in the context of a two-dimensional low Mach number turbulent flow past a square cylinder. The computational aeroacoustic approach that is used in CAAS relies on coupling a base flow solver to the acoustic solver throughout a computational cycle. The unsteady fluid motion, which is responsible for both the generation and propagation of acoustic waves, is calculated using a high order flow solver. The results of the flow field are then passed to the acoustic solver through an interpolator to map the field values into the acoustic grid. The acoustic field, which is governed by the linearized Euler equations, is then calculated using the flow results computed from the flow solver.

Hadid, A.↗

Emergence of self-organized multivortex states in flocks of active rollers

Active matter, both synthetic and biological, demonstrates complex spatiotemporal self-organization and the emergence of collective behavior. A coherent rotational motion, the vortex phase, is of great interest because of its ability to orchestrate well-organized motion of self-propelled particles over large distances. However, its generation without geometrical confinement has been a challenge. Here, we show by experiments and computational modeling that concentrated magnetic rollers self-organize into multivortex states in an unconfined environment. We find that the neighboring vortices more likely occur with the opposite sense of rotation. Our studies provide insights into the mechanism for the emergence of coherent collective motion on the macroscale from the coupling between microscale rotation and translation of individual active elements. These results may stimulate design strategies for self-assembled dynamic materials and microrobotics.

36 MATERIALS SCIENCE↗

On the inviscid rolled-up structure of lift-generated vortices

A simple form is presented of the relationships derived by Betz for the inviscid, fully developed structure of lift-generated vortices behind aircraft. An extension is then made to arbitrary span-load distributions by inferring guidelines for the selection of rollup centers for the vortex sheet. These techniques are easier to use and yield more realistic estimates of the rolled-up structure of vortices than the original form of Betz' theory when the span loading differs appreciably from elliptic loading.

Rossow, V. J.↗

An experimental investigation of blade-vortex interaction at normal incidence

An experimental investigation has been conducted for the blade-vortex interaction (BVI) of a rotor at normal incidence, where the vortex is generally parallel to the rotor axis. Tip Mach number, radial BVI station, and free stream velocity were varied during measurements of fluctuating blade pressures, far field sound pressure levels and directivity, incident vortex velocity field, and blade-vortex interaction angles. The experimental setup is representative of the chopping of helicopter main rotor tip vortices by the tail rotor. This interaction is found to generate impulsive noise which radiates primarily ahead of the blade.

Ahmadi, A. R.↗

Experimental and Computational Study of Tones Occurring with a Coaxial Nozzle

The source of audible tones occurring with a coaxial nozzle in a range of low Mach numbers is explored experimentally as well as computationally. The hardware is comprised of an inner and an outer nozzle, without a center-body, that are held together by a set of four struts. With increasing jet Mach number (M(sub j)), first a tone occurred at about 2550 Hz around M(sub j)=0.06. At higher values of M(sub j) a tone at 5200 Hz dominated the noise spectra. The corresponding nondimensional frequency, based on effective thickness of the inner nozzle lip and jet exit velocity, turned out to be about 0.2, a value characteristic of Karmann vortex shedding. Thus, vortex shedding from the inner nozzle lip could be linked to the tones. From a comparison of the acoustic wavelengths and the nozzle dimensions, it was inferred that the vortex shedding excited a one-quarter-wave resonance within the divergent section of either the inner nozzle or the outer nozzle. This led to the generation of the sharp tones.

nozzle↗

Magnetic islands formed due to the Kelvin-Helmholtz instability in the outflow region of collisionless magnetic reconnection

We carry out large-scale particle-in-cell kinetic simulations to demonstrate that a super-Alfvénic electron shear flow across the current layer can be spontaneously generated in the outflow region of magnetic reconnection, which is unstable to the electron Kelvin-Helmholtz (K-H) instability. Finally, the resulted K-H vortex structures continuously drive the secondary magnetic reconnection and formation of secondary magnetic islands, which leads to strong electron energization in the outflow region.

58 GEOSCIENCES↗

Temperature-driven BCS-BEC crossover and Cooper-paired metallic phase in coupled boson-fermion systems

Motivated by strongly correlated and frustrated systems, in this work we propose an effective model that describes the dynamics of pairs of opposite spin fermions scattering from localized bosons. Integrating out one of the degrees, either the bosons or fermions, generates temperature-dependent long-range effective interactions between the entities that we investigate using Monte Carlo techniques. The behavior of bosons is dominated by vortex-antivortex unbinding, with effective interboson interactions beyond the nearest-neighbor Josephson coupling of phases. Remarkably, in the fermion sector we observe a temperature-driven phase transition from a SC phase with a “BCS” spectral function that shows a gap minimum on the underlying Fermi surface to a conducting phase of pairs but with a “BEC” spectral function with a gap minimum at k = 0. Tunneling and angle-resolved photoemission spectroscopy on Bose-Fermi mixtures in cold atomic systems and superconducting islands on graphene are some of the promising experimental platforms to test our predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Partially averaged Navier-Stokes closure modeling for variable-density turbulent flow

We report this work extends the framework of the partially averaged Navier-Stokes (PANS) equations to variable-density flow, i.e., multimaterial and/or compressible mixing problems with density variations and production of turbulence kinetic energy by both shear and buoyancy mechanisms. The proposed methodology is utilized to derive the PANS BHR-LEVM closure. This includes a priori testing to analyze and develop guidelines toward the efficient selection of the parameters controlling the physical resolution and, consequently, the range of resolved scales of PANS. Two archetypal test-cases involving transient turbulence, hydrodynamic instabilities, and coherent structures are used to illustrate the accuracy and potential of the method: the Taylor-Green vortex at Reynolds number Re = 3000, and the Rayleigh-Taylor flow at Atwood number 0.5 and (Re) max ≈ 500. These representative problems, for which turbulence is generated by shear and buoyancy processes, constitute the initial validation space of the new model, and their results are comprehensively discussed in two subsequent studies. The computations indicate that PANS can accurately predict the selected flow problems, resolving only a fraction of the scales of large-eddy simulation and direct numerical simulation strategies. The results also reiterate that the physical resolution of the PANS model must guarantee that the key instabilities and coherent structures of the flow are resolved. The remaining scales can be modeled through an adequate turbulence scale-dependent closure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

On the inviscid rolled-up structure of lift generated vortices

A simple form is presented of the relationships for the inviscid, fully developed structure of lift-generated vortices behind aircraft wings. The method is then extended to arbitrary span-load distributions by inferring guidelines for the selection of rollup centers for the vortex sheet, along with rules for calculating the fully developed structure of the resulting multiple vortices. These techniques yield realistic estimates of the rolled-up structure of vortices produced by a wider variety of span-load distributions than possible with the original form of the theory.

Rossow, V. J.↗

The Causes of Propeller Pitching Moment and the Conditions for its Significance

Recent development of vertical takeoff and landing (VTOL) aircraft has renewed interest in the study of propellers. One metric in particular, the propeller pitching moment, has been observed to be important to VTOL aircraft stability and control in the past. Propellers at angles of attack could not be accurately modeled in generations past due to a lack of computational power, but even with advances in computer technology, modern designers seem to possess insufficient knowledge in this area. In this dissertation, we study the physics behind propeller pitching moment in the context of an isolated propeller and a propeller upstream of a wing. An unsteady 3D vortex lattice method is developed specifically to model propellers at angles of attack and is validated by comparing to high-fidelity CFD analyses. We then use the model to isolate velocity influences to show that the propeller pitching moment is largely caused by two effects: a skewed wake and the presence of wing circulation. Generated maps of propeller pitching moment over a range of operational parameters corresponding to VTOL transition show that the low flight speeds and high angles of attack encountered during transition lead to significant magnitudes of propeller pitching moment that would be difficult to trim using passive methods. Also, derivation of a generalizable metric of significance shows that the peak contribution of propeller pitching moment to aircraft stability is comparable to a longitudinal displacement of the center of gravity by several percent of the wing chord. Finally, we give a concluding discussion on the impact of propeller pitching moment on VTOL aircraft design.

Xiaofan Fei↗

Second harmonic Bessel-Gauss beam shaping with elliptic axicon aberrations

The second harmonic (SH) of an axicon generated Bessel-Gauss beam is created through the nonlinear interaction of photons with a crystal, resulting in the energy doubling of the output photons. In this work, we show experimentally that in addition to frequency doubling, the SH of Bessel-Gauss beams under asymmetric aberrations from an elliptic axicon exhibit intriguing beam formation. Particularly, the central region of the SH beam profile is composed of two central spots of various geometries surrounded by nested ellipses; one of which is the configuration of two central gamma dots with similar radius knotted by nested ellipses for a zeroth-order Bessel-Gauss pump. These SH beams consistently maintain their spatial profile throughout propagation, reminiscing the behavior of screw dislocations in wave patterns. Our numerical simulations produce beam dynamics consistent with that of experiments and further implicate the remarkable interweaving of bright spots with dark vortices. This is especially noticeable when the beams dynamically oscillate along the optical axis, resulting in the genesis of spatially polarized beams with a knotted framework. The insights gained from our study establish a novel paradigm for exploring interactions of Bessel-like beams with vortex dynamics. This, in turn, has the potential to spark innovations in optical applications, fostering new methodologies to harness and manipulate complex light structures. Our experimental findings could spur new methods of generating logical states of light and new opportunities for material processing control. Published by the American Physical Society 2025

Wang, Tianhong (ORCID:0000000169104201)↗

Wind tunnel measurements on a full-scale F/A-18 with a tangentially blowing slot

A full-scale F/A-18 was tested in the 80 by 120-Foot Wind Tunnel at NASA Ames Research Center to measure the effectiveness of a tangentially blowing slot in generating significant yawing moments while minimizing coupling in the pitch and roll axes. Various slot configurations were tested to determine the optimum configuration. The test was conducted for angles of attack from 25 to 50 deg, angles of sideslip from -15 to +15 deg, and freestream velocities from 67 ft/sec to 168 ft/sec. By altering the forebody vortex flow, yaw control was maintained for angles of attack up to 50 deg. Of particular interest was the result that blowing very close to the radome apex was not as effective as blowing slightly farther aft on the radome, that a 16-inch slot was more efficient, and that yawing moments were generated without inducing significant rolling or pitching moments.

Lanser, Wendy R.↗