Search NASA⌕ Search

SEARCH · Search NASA

Results for “Capture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Technoeconomic and Life Cycle Analysis for Bio-Energy with Carbon Capture and Storage (BECCS) Baseline

Bio-Energy with Carbon Capture and Storage (BECCS) is an attractive option from an environmental standpoint, as biomass regrowth removes CO 2 from the atmosphere, which offsets the emissions produced by burning the biomass. When combined with carbon capture, this produces a system that is capable of zero or even negative greenhouse gas (GHG) emissions. This study examines the performance, environmental impact, and economics of co-firing biomass in pulverized coal (PC) power plants. The analysis is based on various plant configurations (with and without carbon dioxide [CO 2 ] capture) using hybrid poplar biomass at three levels of co-fire (20, 35, and 49 weight percent) with Illinois No. 6 coal. This study is an analysis of the overall performance and economics of the plant, which was used to determine the levelized cost of electricity (LCOE) and to perform a full environmental life cycle analysis (LCA) of greenfield PC plants co-firing biomass.

09 BIOMASS FUELS↗

Simultaneous Capture and Conversion of CO 2 to Methanol via a Switchable Ionic Liquid and Low-Temperature Metal Catalyst (CRADA 449)

Advance development of the Integrated (Carbon Dioxide) CO 2 Capture and Conversion to Methanol (ICCCM) process, which is based on PNNL’s proprietary Carbon Dioxide Binding Organic Liquids (CO 2 BOLs) capture solvent technology for separating the CO 2 from dilute streams. Design, fabricate, and demonstrate a bench-scale ICCCM prototype for the continuous flow combined capture and catalytic conversion of CO 2 into methanol and assess viability for commercialization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Neutron Capture and Transmission Measurements of 54 Fe at the RPI LINAC [Slides]

Transmission and capture measurements provide a wholistic set of experimental data to start resonance evaluation on 54 Fe. Analysis thus far supports that changes are needed in 54 Fe evaluation. Major accomplishments include the completion of radiative capture measurements of 54 Fe and the completion of total cross section measurements of 54 Fe. Future work includes the completion of data analysis relevant to capture and transmission measurements (May 2022), complete fitting of new resonance parameters to 54 Fe data (early 2023), and completion of all required deliverables for graduation (May 2023).

07 ISOTOPE AND RADIATION SOURCES↗

Natural Gas Combined Cycle Carbon Capture Retrofit Database

This tool provides high-level analysis on the incremental costs for retrofitting natural gas combined cycle plants with carbon dioxide capture and/or compression systems. Options are available to include costs of other technological improvements that would be required to comply with various environmental regulations when installing carbon capture technology. This model is based on the NETL report "Cost and Performance of Retrofitting NGCC Units for Carbon Capture" (2023).

03 NATURAL GAS↗

Carbon Capture Design and Costing: Phase 2 (C3DC2) (Final Project Report)

ION Clean Energy’s (ION) advanced solvent is one of the leading solvent systems currently under development for post-combustion carbon dioxide (CO 2 ) capture. ION has partnered with Nebraska Power Public District (NPPD), Sargent & Lundy, Koch Modular Process Systems, and Siemens to design a commercial-scale (700 MW) capture system utilizing ION’s advanced solvent, ICE-21, retrofitted onto NPPD’s Gerald Gentleman Station in Sutherland, Nebraska, USA. The capture system was designed to take full advantage of the solvent benefits including an efficient physical plant layout, reduced energy requirements, less solvent degradation, lower emissions, and lower capital costs relative to systems built with DOE BBS case benchmark solvents. This Front-End Engineering Design (FEED) study also included an investigation of utilizing biomass co-combustion with the aim of reaching near-zero emissions for this coal-fired power generating unit. The targeted biomass was from local resources in Nebraska tied to the production of ethanol.

01 COAL, LIGNITE, AND PEAT↗

Pulverized Coal CO2 Capture Retrofit Database

This tool provides high-level analysis on the incremental costs for retrofitting pulverized coal plants with carbon dioxide capture and/or compression systems. Options are available to include costs of other technological improvements that would be required to comply with various environmental regulations when installing carbon capture technology. This model is based on the NETL report "Eliminating the Derate of Carbon Capture Retrofits." (2023). For the Excel spreadsheet tools associated with this report, please go to https://www.netl.doe.gov/energy-analysis/details?id=e7e822ff-18ac-4bc6-a052-0be3521b8789

01 COAL, LIGNITE, AND PEAT↗

Tunable Rapid Uptake Amino Polymer Aerogels for Direct Air Capture of Carbon Dioxide (Final Scientific/Technical Report)

The Palo Alto Research Center (PARC) developed a novel CO 2 adsorbent material, and in collaboration with Lawrence Livermore National Laboratory (LLNL), demonstrated its state-of-the-art performance for direct air capture. The target application for this technology is in direct air carbon capture and storage (DACCS), for which the adsorbent material provides the critical function of binding CO 2 from ambient air. At the beginning of the project, the technology concept and application were established, representing technology readiness level (TRL) 2. The hypothesis was that a microporous polymer comprising a high density of primary amines would make an exceptional adsorbent for direct air capture, and the goal of the project was to prove that hypothesis and advance the technology to TRL 3. To accomplish this, we approached the challenge from the perspective of materials synthesis optimization with the narrow focus of achieving the target material properties. This approach was successful, and we now have a synthetic procedure that results in a novel adsorbent material with the target material properties. The chemical name for the novel adsorbent material is poly(vinylamine-co-divinylbenzene) (PVAm-DVB).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modification of CO 2 /H 2 O selectivity of polymer for carbon capture materials

Today, the atmospheric carbon dioxide (CO 2 ) concentration is 421ppm, over one hundred ppm higher than it was at any point in the last 800,000 years (NASA, 2023). Multiple strategies are necessary to reduce the presence of carbon dioxide in the atmosphere. Besides limiting CO 2 output, carbon capture technology is essential to reduce the overall amount of CO 2 . The Microencapsulated CO 2 Sorbents (MECS) team at Lawrence Livermore National laboratory has developed technologies that can capture CO 2 inside microcapsules, where it can be temporarily stored and later released. In 2017, the commercial potential of these microcapsules was recognized. The brewing industry only requires about one third of the CO 2 it releases for carbonization and packaging, which Congwang Ye and Lionel Keene learned when they met with leaders of small breweries in Colorado to discuss employing carbon capture microcapsules in their processes to reduce their carbon footprint and production costs (Thomas, 2017). The breweries were interested in the technology, but the existing microcapsules require hydration, which is an expensive process for small brewers. In order to develop the microcapsules so they can be commercialized, it is essential to reduce their water loss to improve efficiency and reduce costs for the customers. One method to resolve this issue is to alter the membrane formulation by adding a material that is known to be hydrophobic to decrease the water permeability of the entire membrane. The goal of this project was to study the effect of dispersing a nanomaterial in the polymer membrane shells of microcapsules on the water vapor and carbon dioxide permeability of the membranes.

36 MATERIALS SCIENCE↗

Low Energy Muon Capture and Transport from a Heavy Target

The MeV Test Area (MTA) secondary beamline is currently designed to produce and capture a low energy pion beam that then produces a tertiary muon beam via decay along the secondary line. The challenge presented in capturing muons from low-energy decay-in-flight pions, is the large decay angle that results from the low momentum. The current air-core quadruples lack the strength to bend/capture muons at large angles. Recently much stronger 400- MeV Linac quadrupoles have become available which are capable of strong focusing and large-angle capture. Initial results from this upgrade and reconfiguration indicate a major improvements in angle acceptance and transport ability for low-energy muons.

Winter, Wesley↗

ION Validation of Transformational CO2 Capture Solvent Technology with Revolutionary Stability: “Project Apollo”

This final report presents all the work and tests performed during ION’s carbon dioxide (CO2) capture pilot test campaign at the 0.6 MWe scale in the Pilot Solvent Test Unit (PSTU) at the National Carbon Capture Center (NCCC): “Validation of Transformational CO2 Capture Solvent Technology with Revolutionary Stability,” referred to as the “Apollo” Project (DE-FE0031727).

Meuleman, Erik↗

Fog and Froth-based Post Combustion CO 2 Capture in Fossil Fuel Power Plants

The University of Kentucky (UK) project titled “Fog+Froth-Based Post-Combustion CO 2 Capture in Fossil Fuel Power Plant”, DE-FE0031733, was conducted from 5/1/2019 to 12/31/2023 in two Budget Periods (BPs), with BP1 from 5/1/2019 to 1/31/2021 and with BP2 from 2/1/2021 to 12/31/2023. The overall goal is to reduce the CO 2 capture capital and operating cost by reducing the absorber size. Other participants included Industrial Climate Solutions, Inc. (ICSI), ALL4 and NexantECA. All project deliverables, milestones, and success criteria were met. Scaled-up demonstration of the compact absorber is planned and two specific aspects of the project demonstration, the solvent spray and the low absorber bottom packing temperature, have been incorporated into the overall UK CO 2 capture process which is on the road to large scale verification and commercialization.

01 COAL, LIGNITE, AND PEAT↗

Integrated Process for Direct Air Capture of CO 2 and Electrochemical Conversion to Ethanol

This Cooperative Research and Development Agreement (CRADA) between UT-Battelle, LLC and Reactwell, L.L.C. aimed to facilitate the development of an energy-efficient and cost-effective technology that captures carbon dioxide (CO 2 ) from ambient air and converts it electrochemically to ethanol. Direct air capture (DAC) of CO 2 offers the prospect of permanently lowering the atmospheric CO 2 concentration, providing economic and energy-efficient technologies can be developed and deployed at a large scale. DAC has the potential for high-capacity atmospheric CO 2 capture, the flexibility of placement anywhere on earth, and the generation of high-purity CO 2 streams. The most significant technical challenge with DAC is the very low atmospheric concentration of CO 2 , thereby requiring sorbents that bind CO 2 quickly, strongly, and selectively against other components in the air. Integrating DAC with CO 2 conversion into useful chemicals, fuels, or materials can provide an economically feasible solution for mitigating climate change. As long as the carbon contained in these products is taken from the atmosphere and no additional carbon emissions result from their production, processing, and transportation, they can be considered carbon-neutral products. This CRADA facilitated the development of a new net-zero emission technology that closes the carbon cycle by combining DAC with the catalytic electrochemical conversion of CO 2 into ethanol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulations of Positron Capture at Ce+BAF

We present a capture concept for the continuous wave (CW) polarized positron injector for the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (Ce+BAF). This two-step concept is based on (1) the generation of bremsstrahlung radiation by a longitudinally polarized electron beam 1 mA, 120 MeV, 90% polarization), passing through a tungsten target, and (2) the production of e+e--pairs by these bremsstrahlung photons in the same target. To provide highly-polarized positron beams (>60% polarization) or high-current positron beams (>1 µA) with low polarization for nuclear physics experiments, the positron source requires a flexible capture system with an adjustable energy selection band. The results of beam dynamics simulations and calculations of the power deposited in the positron capture section are presented.

Ushakov, Andriy↗

Detection of MeV-Scale Gammas from Pion/Muon Nuclear Capture With the LArIAT Liquid Argon TPC

LArIAT (Liquid Argon In A Testbeam) is a LArTPC experiment at Fermilab which aims to understand and characterize interactions of neutrino final-state products with Argon. Tracks for pions and muons in LArTPCs are difficult to differentiate since both particles exhibit very similar ionization densities. We are exploring unique new particle discrimination capabilities for pions and muons by exploiting information from small, isolated ionization depositions, referred to as "blips", reconstructed near the endpoint of stopping tracks. These blips are formed by gammas emitted when an at-rest pion or muon captures on the argon nucleus. The relatively low beam energy provided by LArIAT makes it uniquely suited for performing this demonstration. In this talk, an overview of event candidate selection and reconstruct blips corresponding to our signal of interest, nuclear captures of pions and muons at rest inside LArIAT's TPC, and how we estimate and subtract backgrounds from these capture-at-rest blip signals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bench-Scale Testing of Monolithic PPI Structured Contactors for Direct Air Capture of CO 2

The overall project objective was to develop, optimize and bench-scale test the integrated embodiment of a leading direct air capture (DAC) sorbent composition, linear-poly(propylenimine) (l-PPI), in a structured material system, specifically a monolithic contactor for achieving low pressure drop, to justify its further scale-up in a subsequent program. The project team was led by CORMETECH, a leading monolithic gas/solid contactor manufacturer for environmental applications, and included Global Thermostat, a well-known DAC start-up, and Georgia Tech, a prominent US academic institution in carbon capture and DAC. The monolithic contactor for l-PPI in this project employed an advanced, cost-effective fabrication technique from CORMETECH, namely a porous monolith substrate directly impregnated with the amine, an approach contrasting to the traditional wash-coating methods used for activating monoliths. The l-PPI monolithic contractor is targeted for use in DAC systems such as the Global Thermostat DAC process, which involves the cyclic operation of ambient air flow over a monolithic amine contactor followed by steam-mediated thermal desorption and CO 2 collection, maximizing volumetric productivity while reducing the auxiliary power required to capture CO 2 from air. The Global Thermostat DAC process currently utilizes poly(ethyleneimine) (PEI) materials as baseline sorbents, which are subject to oxidative degradation and slow capacity fade at the elevated temperature required for efficient CO 2 removal. Georgia Tech, with Global Thermostat, had discovered in lab-scale efforts that l-PPI had superior resistance to oxidative degradation compared to PEI, with similar CO 2 adsorption capacity. While the novel l-PPI sorbent offers significant advantages over PEI for DAC, including potential design simplification and increased process efficiency, it is not commercially available, and prior to this project, had not yet been evaluated on the bench-scale in a structured contactor.

36 MATERIALS SCIENCE↗

Capture Cavities for the CW Polarized Positron Source Ce+BAF

The initial design of the capture cavities for the continuous wave (CW) polarized positron beams at Jefferson Lab (Ce+BAF) is presented. A chain of standing wave multi-cell copper cavities inside a solenoid tunnel are selected to bunch/capture positrons. The cavity design strategy is presented to accommodate constrains from the large phase distribution of the incident beams, RF power, radiation and RF heating, beam loading, etc. to improve the capture efficiency. A matrix of design parameters' range are given for future system optimization when the capture cavities are considered together with other sub-systems and beam dynamics. The contents will also be useful for other CW cavity design for beams with large phase space distribution.

Wang, Shaoheng↗

Machine Learned Force Field Modeling of Metal Organic Frameworks for CO2 Direct Air Capture

Direct air capture (DAC) is a method for removing CO2 directly from air. Metal organic frameworks (MOFs) have been studied as DAC sorbent materials because of their structural and chemical diversity. Thermodynamic calculations using classical force fields are often used to evaluate MOFs for their performance in separations such as CO2 capture. Machine-learned force fields (MLFFs) can use machine learning to form quantitative relationships between a material’s chemical structure and the forces and energies predicted by more accurate quantum mechanical calculations, such as dispersion-corrected density functional theory (DFT). These descriptions of forces and energies can be used to improve the accuracy of adsorption calculations. In this work, classical models were used to pre-screen MOFs for CO2 capture. DFT calculations were then used to examine the adsorption mechanism. Next, MLFF models were developed for MOFs to achieve DFT-level accuracy for the forces and energies associated with MOF flexibility and CO2 adsorption. These methods were parametrized based on thousands of DFT calculations of CO2 in flexible MOFs and used to predict MOF structural properties as well as CO2 adsorption properties.

Findley, John↗

Modification of CO2/H2O Selectivity of Polymer Through Graphene Coating for Carbon Capture Materials

A harmful issue that needs attention and solution is the rising carbon dioxide (CO2) in our atmosphere. Carbon dioxide in our atmosphere is at an all time high and has continuously increased since the industrial revolution. It has increased tremendously going from 315 parts per million (ppm) in the 1960s up to 419.3 ppm in 2023 as shown in Figure 1. Moreover, CO2 emissions have increased from 11 billion tons/year in the 1960s to 38.6 billion tons/year in 2023. The increase in CO2 found in our atmosphere has a number of detrimental effects such as increase in global temperatures and an increase in the ocean’s acidity. Human activities are greatly involved in the cause of CO2 emissions. At Lawrence Livermore National Lab (LLNL) the Microencapsulated CO2 sorbents (MECS) division has been doing research and investigating formulations for their microcapsules. MECS are core-shell microcapsules consisted of a highly permeable polymer shell and a fluid (sodium carbonate solution) that reacts and absorbs carbon dioxide. An example of the microcapsules are shown in Figure 2. Equation 1 shows the chemical reaction of the fluid (sodium carbonate) contained in the polymer shell that acts as the carbon dioxide sorbent and becomes sodium bicarbonate. The LLNL MECS team is in the process of scaling up their microcapsules for potential applications in “carbon capture from flue gas streams generated by fossil fuel combustion in industrial plants and operations, carbon capture in breweries and soft drink manufacture, carbon capture directly from indoor air to improve its quality”. The microcapsule’s possibility for commercial applications was discovered in 2017.

36 MATERIALS SCIENCE↗