Search NASA⌕ Search

SEARCH · Search NASA

Results for “Connection length”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Factors in the Design of Centrifugal Type Injection Valves for Oil Engines

This research was undertaken in connection with a general study of the application of the fuel injection engine to aircraft. The purpose of the investigation was to determine the effect of four important factors in the design of a centrifugal type automatic injection valve on the penetration, general shape, and distribution of oil sprays. The general method employed was to record the development of single sprays by means of special high-speed photographic apparatus capable of taking 25 consecutive pictures of the moving spray at a rate of 4,000 per second. Investigations were made concerning the effects on spray characteristics, of the helix angle of helical grooves, the ratio of the cross-sectional area of the orifice to that of the grooves, the ratio of orifice length to diameter, and the position of the seat. Maximum spray penetration was obtained with a ratio of orifice length to diameter of about 1.5. Slightly greater penetration was obtained with the seat directly before the orifice.

Joachim, W F↗

CHARACTERIZING THE RADIO-X-RAY CONNECTION IN GRS 1915+105

We analyzed radio and X-ray observations of GRS 1915+105, between 1995 May and 2006 June, focusing on the times characterized by radio flares and cycles of hard dips-soft spikes in the X-ray light curve. Assuming these flares to be discrete ejections, we applied a plasmon model to the radio data, with good agreement with the light curves. We fitted a total of 687 radio flares with a standard model of a plasmon. We found that the distribution of width is t{sub 0} = 1160 s with an rms deviation of 360 s, while that of the amplitude is S {sub max} = 59 mJy with an rms deviation of 28 mJy. The distribution of width is thus rather peaked, while that of the amplitude is not. Regarding radio and X-ray links, this study confirms previous observations on smaller data sets, namely that X-ray cycles of hard dips-soft spikes are always followed by radio flares. A strong correlation is found between the length of X-ray 'dips' in the X-ray light curves and the amplitude and fluence of the subsequent radio oscillations. A model of an exponential rise of the form L{sub 15GHz}({Delta}t) = L {sub max}(1 - exp(-({Delta}t - {Delta}t{sub min})/{tau}) is in good agreement with the observations, with the maximum fluence L{sub max} on the order of 70 Jy s, and the characteristic time {tau} on the order of 200-500 s. We discuss possible physical interpretations of this correlation, regarding the nature of the ejected material and the physical process responsible for the ejection.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal compensator for closed-cycle helium refrigerator

The wave length of an infrared, semiconductor laser diode having an output frequency that is dependent on the diode temperature is maintained substantially constant by maintaining the diode temperature constant. The diode is carried by a cold tip of a closed cycle helium refrigerator. The refrigerator has a tendency to cause the temperature of the cold tip to oscillate. A heater diode and a sensor diode are placed on a thermal heat sink that is the only highly conductive thermal path between the laser diode and the cold tip. The heat sink has a small volume and low thermal capacitance so that the sensing diode is at substantially the same temperature as the heater diode and substantially no thermal lag exists between them. The sensor diode is connected in a negative feedback circuit with the heater diode so that the tendency of the laser diode to thermally oscillate is virtually eliminated.

Jennings, D. E.↗

Extending unbiased stereology of brain ultrastructure to three-dimensional volumes

OBJECTIVE: Analysis of brain ultrastructure is needed to reveal how neurons communicate with one another via synapses and how disease processes alter this communication. In the past, such analyses have usually been based on single or paired sections obtained by electron microscopy. Reconstruction from multiple serial sections provides a much needed, richer representation of the three-dimensional organization of the brain. This paper introduces a new reconstruction system and new methods for analyzing in three dimensions the location and ultrastructure of neuronal components, such as synapses, which are distributed non-randomly throughout the brain. DESIGN AND MEASUREMENTS: Volumes are reconstructed by defining transformations that align the entire area of adjacent sections. Whole-field alignment requires rotation, translation, skew, scaling, and second-order nonlinear deformations. Such transformations are implemented by a linear combination of bivariate polynomials. Computer software for generating transformations based on user input is described. Stereological techniques for assessing structural distributions in reconstructed volumes are the unbiased bricking, disector, unbiased ratio, and per-length counting techniques. A new general method, the fractional counter, is also described. This unbiased technique relies on the counting of fractions of objects contained in a test volume. A volume of brain tissue from stratum radiatum of hippocampal area CA1 is reconstructed and analyzed for synaptic density to demonstrate and compare the techniques. RESULTS AND CONCLUSIONS: Reconstruction makes practicable volume-oriented analysis of ultrastructure using such techniques as the unbiased bricking and fractional counter methods. These analysis methods are less sensitive to the section-to-section variations in counts and section thickness, factors that contribute to the inaccuracy of other stereological methods. In addition, volume reconstruction facilitates visualization and modeling of structures and analysis of three-dimensional relationships such as synaptic connectivity.

NASA Discipline Neuroscience↗

Interplanetary Magnetic Field Guiding Relativistic Particles

The origin and the propagation of relativistic solar particles (0.5 to few Ge V) in the interplanetary medium remains a debated topic. These relativistic particles, detected at the Earth by neutron monitors have been previously accelerated close to the Sun and are guided by the interplanetary magnetic field (IMF) lines, connecting the acceleration site and the Earth. Usually, the nominal Parker spiral is considered for ensuring the magnetic connection to the Earth. However, in most GLEs the IMF is highly disturbed, and the active regions associated to the GLEs are not always located close to the solar footprint of the nominal Parker spiral. A possible explanation is that relativistic particles are propagating in transient magnetic structures, such as Interplanetary Coronal Mass Ejections (ICMEs). In order to check this interpretation, we studied in detail the interplanetary medium where the particles propagate for 10 GLEs of the last solar cycle. Using the magnetic field and the plasma parameter measurements (ACE/MAG and ACE/SWEPAM), we found widely different IMF configurations. In an independent approach we develop and apply an improved method of the velocity dispersion analysis to energetic protons measured by SoHO/ERNE. We determined the effective path length and the solar release time of protons from these data and also combined them with the neutron monitor data. We found that in most of the GLEs, protons propagate in transient magnetic structures. Moreover, the comparison between the interplanetary magnetic structure and the interplanetary length suggest that the timing of particle arrival at Earth is dominantly determined by the type of IMF in which high energetic particles are propagating. Finally we find that these energetic protons are not significantly scattered during their transport to Earth.

Masson, S.↗

RivGraph: Automatic extraction and analysis of river and delta channel network topology

River networks sustain life and landscapes by carrying and distributing water, sediment, and nutrients throughout ecosystems and communities. At the largest scale, river networks drain continents through tree-like tributary networks. At typically smaller scales, river deltas and braided rivers form loopy, complex distributary river networks via avulsions and bifurcations.In order to model flows through these networks or analyze network structure, the topology, or connectivity, of the network must be resolved. Additionally, morphologic properties of each river channel as well as the direction of flow through the channel inform how fluxes travel through the network’s channels. Riv Graphis a Python package that automates the extraction and characterization of river channel networks from a user-provided binary image, or mask, of a channel network (Fig. 1). Masks may be derived from (typically remotely-sensed) imagery, simulations, or even hand-drawn. RivGraph will create explicit representations of the channel network by resolving river centerlines as links, and junctions as nodes. Flow directions are solved for each link of the network without using auxiliary data, e.g., a digital elevation model (DEM). Morphologic properties are computed as well, including link lengths, widths, sinuosities, branching angles,and braiding indices. If provided,RivGraph will preserve georeferencing information of the mask and will export results as ESRI shapefiles, GeoJSONs, and GeoTIFFs for easy import into GIS software.RivGraph can also return extracted networks as networkx objects for convenient interfacing with the full-featured networkx package (Hagberg et al., 2008). Finally, RivGraph offers a suite of topologic metrics that were specifically designed for river channel network analysis (Tejedor et al., 2015b).

54 ENVIRONMENTAL SCIENCES↗

Penalty-Based Interface Technology for Prediction of Delamination Growth in Laminated Structures

An effective interface element technology has been developed for connecting and simulating crack growth between independently modeled finite element subdomains (e.g., composite plies). This method has been developed using penalty constraints and allows coupling of finite element models whose nodes do not necessarily coincide along their common interface. Additionally, the present formulation leads to a computational approach that is very efficient and completely compatible with existing commercial software. The present interface element has been implemented in the commercial finite element code ABAQUS as a User Element Subroutine (UEL), making it easy to test the approach for a wide range of problems. The interface element technology has been formulated to simulate delamination growth in composite laminates. Thanks to its special features, the interface element approach makes it possible to release portions of the interface surface whose length is smaller than that of the finite elements. In addition, the penalty parameter can vary within the interface element, allowing the damage model to be applied to a desired fraction of the interface between the two meshes. Results for double cantilever beam DCB, end-loaded split (ELS) and fixed-ratio mixed mode (FRMM) specimens are presented. These results are compared to measured data to assess the ability of the present damage model to simulate crack growth.

Averill, Ronald C.↗

Flow Channeling in Fracture Networks: Characterizing the Effect of Density on Preferential Flow Path Formation

Flow channelization is a commonly observed phenomenon in fractured subsurface media where the flow of fluids is restricted primarily to highly transmissive fracture networks surrounded by a low-permeability rock matrix. The multiscale structural heterogeneity of these networks results in multiscale flow channelization where preferential flow paths form at length scales ranging from the entire system down to the subfracture size. We present an analysis of how one of the largest scales in fractured media, the network density, influences the degree of flow channeling that occurs using an ensemble of semigeneric three-dimensional discrete fracture network (DFN) simulations. We construct 10 DFNs, whose fracture lengths follow a power law distribution, at four densities for a total of 40 networks. We characterize their structure in terms of the network topology and geometry. Eulerian and Lagrangian observations of the steady-state flow fields obtained within the networks are used to quantify the degree of flow channelization at the network scale. We introduce a measure for the importance-ranking/hierarchy of different flow paths in the network using graph-based analysis of Lagrangian transport by which the degree of flow channeling between networks is compared. These flow observations are then linked to the structural properties of the networks. In general, network-scale flow channeling decreases as the network density increases. However, at low densities, there is more uniform flow within the entire connected network than in high-density networks. We also demonstrate how standard transport observables can be used to infer the degree of flow channelization occurring within a fracture network.

58 GEOSCIENCES↗

Generalized hydrodynamic analysis of transport through a finite open nanopore for two-component single-file systems

Single-file diffusion (SFD) in finite open nanopores is characterized by nonzero spatially varying tracer diffusion coefficients within a generalized hydrodynamic description. This contrasts with infinite SFD systems where tracer diffusivity vanishes. In standard tracer counterpermeation (TCP) analysis, two reservoirs, each containing a different species, are connected to opposite ends of a finite pore. Here, we implement an extended TCP analysis to allow the two reservoirs to contain slightly different mixtures of the two species. Then, determination of diffusion fluxes through the pore allows extraction of diffusion coefficients for near-constant partial concentrations of the two species. This analysis is applied for a lattice-gas model describing two-component SFD through a finite linear pore represented by a one-dimensional array of cells. Two types of particles, A and B, can hop only to adjacent empty cells with generally different rates, $h_A$ and $h_B$. Particles are noninteracting other than exclusion of multiple cell occupancy. Results reveal generalized hydrodynamic tracer diffusion coefficients which adopt small values inversely proportional to pore length in the pore center, but which are strongly enhanced near pore openings.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Physical and Functional Constraints on Viable Belowground Acquisition Strategies

Since their emergence onto land, terrestrial plants have developed diverse strategies to acquire soil resources. However, we lack a framework that adequately captures how these strategies vary among species. Observations from around the world now allow us to quantify the variation observed in commonly-measured fine-root traits but it is unclear how root traits are interrelated and whether they fall along an “economic” spectrum of acquisitive to conservative strategies. We assessed root trait variation and mycorrhizal colonization rates by leveraging the largest global database of fine-root traits (the Fine-Root Ecology Database; FRED). We also developed a heuristic model to explore the role of mycorrhizal fungi in defining belowground exploration efficiency across a gradient of thin- to thick-diameter roots. In support of the expectations of the “root economic spectrum,” we found that root diameter was negatively related to specific root length (Pearson’s r=-0.76). However, we found an unexpected negative relationship between root diameter and root tissue density (Pearson’s r = -0.40), and we further observed that root nitrogen content was largely unrelated to other economic traits. Mycorrhizal colonization was most closely associated with root diameter (Pearson’s r = 0.62) and was unrelated to root tissue density and root nitrogen. The heuristic model demonstrated that while thinner roots have inherently greater capacity to encounter soil resources based on higher surface area per unit mass, the potential for increased associations with mycorrhizal fungi in thicker roots, combined with greater hyphal growth, can result in equally acquisitive strategies for both thin- and thick roots. Taken together, our assessments of root trait variation, trade-offs with mycorrhizal fungi, and broader connections to root longevity allowed us to propose a series of fundamental constraints on belowground resource acquisition strategies. Physical tradeoffs based on root construction (i.e., economic traits) and functional limitations related to the capacity of a root to encounter and acquire soil resources combine to limit the two-dimensional belowground trait space. Within this trait space there remains a diversity of additional variation in root traits that facilitates a wide range of belowground resource acquisition strategies.

59 BASIC BIOLOGICAL SCIENCES↗

Simulations of Solar Jets Confined by Coronal Loops

Coronal jets are collimated, dynamic events that occur over a broad range of spatial scales in the solar corona. In the open magnetic field of coronal holes, jets form quasi-radial spires that can extend far out into the heliosphere, while in closed-field regions the jet outflows are confined to the corona. We explore the application of the embedded-bipole model to jets occurring in closed coronal loops. In this model, magnetic free energy is injected slowly by footpoint motions that introduce twist within the closed dome of the jet source region, and is released rapidly by the onset of an ideal kink-like instability. Two length scales characterize the system: the width (N) of the jet source region and the footpoint separation (L) of the coronal loop that envelops the jet source. We find that both the conditions for initiation and the subsequent dynamics are highly sensitive to the ratio L/N. The longest-lasting and most energetic jets occur along long coronal loops with large L/N ratios, and share many of the features of open-field jets, while smaller L/N ratios produce shorter-duration, less energetic jets that are affected by reflections from the far-loop footpoint. We quantify the transition between these behaviors and show that our model replicates key qualitative and quantitative aspects of both quiet Sun and active-region loop jets. We also find that there connection between the closed dome and surrounding coronal loop is very extensive: the cumulative reconnected flux at least matches the total flux beneath the dome for small L/N, and is more than double that value for large L/N.

Wyper, P. F.↗

Effect of Block Length on the Properties of Multiblock Polysulfone-Poly(diallylpiperidinium hydroxide) Anion Exchange Membranes

Research in anion exchange membranes (AEM)s has continued with the development of materials bearing base stable cations. Designing AEMs that microphase separate into hydroxide conductive, hydrophilic domains within a hydrophobic and mechanically robust matrix has been shown to be successful for improving AEM performance. A series of multiblock polysulfone-poly(diallylpiperidinium hydroxide) copolymers (PSf-PDApipOH) of similar hydrophobic/hydrophilic composition was prepared in which the molecular weight of the hydroxide conducting PDApipOH segments was varied. The variable hydrophilic segment molecular weight was designed to assess the impact on microphase separation, hydroxide conductivity, and water management. The multiblock copolymers investigated were prepared by condensation polymerization of preformed4-fluorophenyl sulfone terminated poly(diallylpiperidinium hexafluorophosphate) (PDApipPF6) oligomers with polysulfone monomers. The structure-property relationship between the molecular weight of the conductive PDApipOH segments and AEM performance was demonstrated by evaluation of the microphase separation, water uptake, and hydroxide conductivity. Further, membranes fabricated from the polysulfone-poly(diallylpiperidinium hexafluorophosphate) (PSf-PDApipPF6) multiblock copolymers were shown to form well-connected conductive domains by SAXS and atomic force microscopy experiments. The PSf-PDApipOH membranes were highly conductive with the maximum hydroxide conductivity reaching 62.9 mS∙cm -1 at 60°C and 95% relative humidity. Furthermore, it was demonstrated that the conductivity increased with increasing PDApipOH segment molecular weight.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatial Control Of Functional Properties Via Octahedral Modulations In Complex Oxide Superlattices

The design of distortions and rotations of the corner-connected BO6 octahedra across interfaces has emerged as an exciting platform to control electronic or ferroic behavior in ABO3 perovskite heterostructures. Here, we investigate isovalent manganite superlattices, [(La0.7Sr0.3MnO3)n/(Eu0.7Sr0.3MnO3)n]×m, as a route to spatial control over electronic bandwidth and ferromagnetism through the creation of octahedral superstructures. Electron energy loss spectroscopy confirms a uniform Mn valence state throughout the superlattices. In contrast, the presence of modulations of the MnO6 octahedral rotations along the growth direction commensurate with the superlattice period is revealed by scanning transmission electron microscopy and x-ray diffraction. We show that the Curie temperatures of the constituent materials can be systematically engineered via the octahedral superstructures leading to a modulated magnetization in samples where the superlattice period is larger than the interfacial octahedral coupling length scale, while a single magnetic transition is observed in the short period superlattices.

Environmental Molecular Sciences Laboratory↗

Crystal and molecular structure of four copper(II) ethylenediaminedisuccinates, [Cu{sub 2}(RR,SS-Edds)] . 6H{sub 2}O, Ba{sub 2}[Cu(RR,SS-Edds)](ClO{sub 4}){sub 2} . 8H{sub 2}O, Ba[Cu(SS-HEdds)]ClO{sub 4} . 2H{sub 2}O, and Ba{sub 3}[Cu{sub 2}(RR,SS-Edds){sub 2}](ClO{sub 4}){sub 2} . 6H{sub 2}O

Four Cu(II) complexes with the RR,SS-Edds{sup 4-} and SS-HEdds{sup 3-} anions are synthesized, and their crystal structures are studied. In the compounds [Cu2(RR,SS-Edds)] . 6H{sub 2}O (I) and Ba2[Cu(RR,SS-Edds)](ClO{sub 4}){sub 2} . 8H{sub 2}O (II), the ligand forms hexacoordinate chelate [Cu(Edds)]{sup 2-} complexes with the N atoms and O atoms of the propionate groups in the equatorial positions and the O atoms of the acetate groups in the axial vertices. In the compounds Ba[Cu(SS-HEdds)]ClO{sub 4} . 2H{sub 2}O (III) and Ba3[Cu2(RR,SS-Edds){sub 2}](ClO{sub 4}){sub 2} . 6H{sub 2}O (IV), one of the propionate arms, the protonated arm in III and the deprotonated arm in IV, does not enter into the coordination sphere of the Cu atom. An acetate arm moves to its position in the equatorial plane, and the free axial vertex is occupied by an O atom of the perchlorate ion. In I-IV, the lengths of the equatorial Cu-N and Cu-O bonds fall in the ranges 1.970-2.014 and 1.921-1.970 A, respectively. The axial Cu-O bonds with the acetate groups and ClO{sub 4}{sup -} anions are elongated to 2.293-2.500 and 2.727-2.992 A, respectively. In structure I, the second Cu atom acts as a counterion forming bonds with the O atoms of two water molecules and three O atoms of the Edds ligands. In II-IV, the Ba{sup 2+} cations are hydrated and bound to the O atoms of the anionic complexes and (except for one of the cations in IV) ClO{sub 4}{sup -} anions. The coordination number of the Ba cations is nine. The structural units in I-IV are connected into layers. In I, an extended system of hydrogen bonds links the layers into a framework. In II and III, the layers are linked only by weak hydrogen bonds, one bond per structural unit. In IV, ClO{sub 4}{sup -} anions are bound to the Ba and Cu atoms of neighboring layers, thus serving as bridges between the layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrostatic ion cyclotron, beam-plasma, and lower hybrid waves excited by an electron beam

It is pointed out that electrostatic ion cyclotron (EIC) waves have been extensively investigated in connection with both space and laboratory plasmas. The present investigation has the objective to study the excitation of low-frequency waves in a multiion plasma by electron beams. The frequencies considered range from below the lowest gyrofrequency of the heaviest ion to about the lower hybrid frequency. It is shown that electron-beam instabilities can produce peaks in the growth rate below the cyclotron frequency of each ion species if nonzero perpendicular wave number effects are included in the ion dynamics. The dispersion relations for neutralized ion Bernstein (NIB) and pure ion Bernstein (PIB) waves are considered along with an instability analysis for a cold plasma and warm electron beam, the electron beam-plasma mode, banded ion cyclotron (EIC) waves with small perpendicular wavelengths, and the growth lengths of the waves.

Singh, N.↗

Preliminary design optimization of joined-wing aircraft

The joined wing is an innovative aircraft configuration that has a its tail connected to the wing forming a diamond shape in both top and plan view. This geometric arrangement utilizes the tail for both pitch control and as a structural support for the wing. Several researchers have studied this configuration and predicted significant reductions in trimmed drag or structural weight when compared with a conventional T-tail configuration. Kroo et al. compared the cruise drag of joined wings with conventional designs of the same lifting-surface area and structural weight. This study showed an 11 percent reduction in cruise drag for the lifting system of a joined wing. Although this reduction in cruise drag is significant, a complete design study is needed before any economic savings can be claimed for a joined-wing transport. Mission constraints, such as runway length, could increase the wing area and eliminate potential drag savings. Since other design codes do not accurately represent the interaction between structures and aerodynamics for joined wings, we developed a new design code for this study. The aerodynamic and structural analyses in this study are significantly more sophisticated than those used in most conventional design codes. This sophistication was needed to predict the aerodynamic interference between the wing and tail and the stresses in the truss-like structure. This paper describes these analysis methods, discusses some problems encountered when applying the numerical optimizer NPSOL, and compares optimum joined wings with conventional aircraft on the basis of cruise drag, lifting surface weight, and direct operating cost (DOC).

Gallman, John W.↗

Monolithically interconnected GaAs solar cells: A new interconnection technology for high voltage solar cell output

Photovoltaic linear concentrator arrays can benefit from high performance solar cell technologies being developed at AstroPower. Specifically, these are the integration of thin GaAs solar cell and epitaxial lateral overgrowth technologies with the application of monolithically interconnected solar cell (MISC) techniques. This MISC array has several advantages which make it ideal for space concentrator systems. These are high system voltage, reliable low cost monolithically formed interconnections, design flexibility, costs that are independent of array voltage, and low power loss from shorts, opens, and impact damage. This concentrator solar cell will incorporate the benefits of light trapping by growing the device active layers over a low-cost, simple, PECVD deposited silicon/silicon dioxide Bragg reflector. The high voltage-low current output results in minimal 12R losses while properly designing the device allows for minimal shading and resistance losses. It is possible to obtain open circuit voltages as high as 67 volts/cm of solar cell length with existing technology. The projected power density for the high performance device is 5 kW/m for an AMO efficiency of 26% at 1 5X. Concentrator solar cell arrays are necessary to meet the power requirements of specific mission platforms and can supply high voltage power for electric propulsion systems. It is anticipated that the high efficiency, GaAs monolithically interconnected linear concentrator solar cell array will enjoy widespread application for space based solar power needs. Additional applications include remote man-portable or ultra-light unmanned air vehicle (UAV) power supplies where high power per area, high radiation hardness and a high bus voltage or low bus current are important. The monolithic approach has a number of inherent advantages, including reduced cost per interconnect and increased reliability of array connections. There is also a high potential for a large number of consumer products. Dual-use applications can include battery chargers and remote power supplies for consumer electronics products such as portable telephones/beepers, portable radios, CD players, dashboard radar detectors, remote walkway lighting, etc.

Dinetta, L. C.↗

Determining the structure of tetragonal Y{sub 2}WO{sub 6} and the site occupation of Eu{sup 3+} dopant

The compound Y{sub 2}WO{sub 6} is prepared by solid state reaction at 750 {sup o}C using sodium chloride as mineralizer. Its structure is solved by ab-initio methods from X-ray powder diffraction data. This low temperature phase of yttrium tungstate crystallizes in tetragonal space group P4/nmm (No. 129), Z=2, a=5.2596(2) A, c=8.4158(4) A. The tungsten atoms in the structure adopt an unusual [WO{sub 6}] distorted cubes coordination, connecting [YO{sub 6}] distorted cubes with oxygen vacancies at the O{sub 2} layers while other yttrium ions Y{sub 2} form [YO{sub 8}] cube coordination. Y{sup 3+} ions occupy two crystallographic sites of 2c (C{sub 4v} symmetry) and 2a (D{sub 2d} symmetry) in the Y{sub 2}WO{sub 6} host lattice. With Eu{sup 3+} ions doped, the high resolution emission spectrum of Y{sub 2}WO{sub 6}:Eu{sup 3+} suggests that Eu{sup 3+} partly substituted for Y{sup 3+} in these two sites. The result of the Rietveld structure refinement shows that the Eu{sup 3+} dopants preferentially enter the 2a site. The uniform cube coordination environment of Eu{sup 3+} ions with the identical eight Eu-O bond lengths is proposed to be responsible for the intense excitation of long wavelength ultraviolet at 466-535 nm. -- Graphical abstract: The excitation and emission spectra of Y{sub 2}WO{sub 6}:Eu{sup 3+} indicates the effect of long wavelength-excited property, which is ascribed to the cube coordination environment of Eu{sup 3+} ions with the uniform Eu-O bond length. Display Omitted Research highlights: Y{sub 2}WO{sub 6} is prepared using sodium chloride as mineralizer. The structure of the compound Y{sub 2}WO{sub 6} is solved by ab-initio methods. The site occupation of Eu{sup 3+} is determined. The cube coordination of Eu{sup 3+} ions is responsible for the long wavelength excitation.

36 MATERIALS SCIENCE↗