Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Collimation Systems for the PSR

This note provides a review of collimator systems being used or considered in high-intensity proton accelerators like SNS, J-PARC, LHC, and PIP-II. These facilities use collimators to remove beam halo, restrict transverse size and momentum in the beam to constrain beam losses around collimators and minimize beam losses downstream, particularly losses arising from particles missing the design location at the stripping foil when injected into the proton storage ring. Collimators are placed either in the transport injection lines (single-pass collimators) or in the rings (multi-pass collimators). Collimators in the transport line are placed around stripping foils in H- accelerators, allowing the beamline optics to get rid of the unstripped protons into well localized absorbers. Rings and proton accelerators mostly rely on tungsten scrapers and collimators in a multi-stage configuration to clean the scattered beam particles mainly responsible for heavy losses at high energies. Placement of the collimators is carefully chosen in terms of the right phase advance to maximize the collimating efficiency, whether the collimation is intended to match an injection stripping foil or a downstream acceptance. Collimation systems are designed with the specific concerns of each facility in mind, although all of them prioritize the minimization of activation due to beam losses to enable hands-on access during maintenance periods. At LANSCE, there are no high-energy collimators, although pairs of horizontal and vertical jaws are routinely used in the LEBT to clean and control the transverse beam profile delivered downstream. This report will help in understanding, together with the beam dynamics simulations, which collimation schemes would be most effective for the PSR upgrade. For example, SNS designed off-momentum collimators to be placed in a 90° arc bend, a high-dispersion region in the beam injection line, very similar to the bend at Line D in LANSCE. This system was very effective at minimizing losses during injection into the SNS accumulator ring and is being re-designed for future operation.

43 PARTICLE ACCELERATORS↗

Enhancing Biopreparedness through a Model System to Understand the Molecular Mechanisms that Lead to Pathogenesis and Disease Transmission: NW-BRaVE

The science of biopreparedness to counter biological threats hinges on understanding the fundamental principles and molecular mechanisms that lead to pathogenesis and disease transmission. Our vision to address this challenge is to create a powerful and user-friendly platform to elucidate the fundamental principles of how molecular interactions drive pathogen-host relationships and host shifts. We will enable groundbreaking discoveries by integrating a wide range of structural, genomics, proteomics, and other advanced omics measurements, along with evolutionary and artificial intelligence predictions. To make sure the system is applicable to real-world problems, we will develop it in the context of a tractable model system, the small, abundant, and accessible photosynthetic cyanobacteria and their constantly co-adapting viral pathogens, cyanophages. This model will maintain the system’s applicability to real-world problems and techniques, but the overall focus will be on elucidating general principles of detecting, assessing, and surveilling molecular interaction, adaptation, and coevolution that are system agnostic and therefore extensible to other viral-host interactions. Our overall objectives are to (1) identify the molecular complexes that comprise the cyanobacteria redox macromolecular subsystem and how they dynamically change with bacteriophage infection in situ, using cryo-electron tomography; (2) profile regulatory changes during infection using proteomics, multiomics, and experimental validation, and integrate the data with in situ structures; (3) use genomics and metagenomics to determine environmental and population factors across time scales that impact the interactions between marine cyanobacteria and their cyanophage parasites, predicting the evolutionary origins of in situ structural and functional interactions, convergence and coevolution; and (4) develop a data integration and transformation platform that facilitates the integration of in situ, proteomic, and evolutionary measurements of molecular interactions to surveil diverse hosts and parasites in various environmental contexts. These objectives address Focus Area 2 Reveal Molecular Interactions Across Biological Scales for Design of Targeted Interventions. Our powerful and user-friendly platform will enhance connections between the often-siloed fields of structure, molecular phenotype, and evolutionary genomics that are key to biopreparedness, but in need of integration (Figure 1). We will build an integrated navigation tool to facilitate the effective use of globally distributed experimental data for integrated analysis and predictive modeling. The project will develop, implement, and test a platform to assess host-pathogen molecular interactions, adaptation to hosts and host shifts, and coevolution between hosts and pathogens, successfully impacting the research community by revolutionizing abilities to study any host-pathogen interaction, encourage diverse community contributions, and gain fundamental insights into how proteins adapt to new contexts. This ability will be critical for designing early interventions to address future threats. We will build surveillance training capability, aiming for a fair and equitable response to future pandemics and biothreats.

59 BASIC BIOLOGICAL SCIENCES↗

Generalized Quasi-Static Mooring System Modeling with Analytic Jacobians

This paper presents a generalized and efficient method for quasi-static analysis of mooring systems, including complex scenarios such as when shared mooring lines interconnect multiple floating wind or wave energy devices. While quasi-static mooring models are well established, most published formulations are focused on specific applications, and no publicly available implementations provide efficient handling of large mooring system networks. The present formulation addresses these gaps by: (1) formulating solutions for edge cases not typically supported by quasi-static models; (2) creating a fully generalized model structure such that any combination of mooring lines, point masses, and floating bodies can be assembled; and (3) deriving analytic expressions for the system Jacobians (stiffness matrices) so that systems with many degrees of freedom can be solved efficiently. These techniques form the theory basis of MoorPy, an open-source mooring analysis library. The model is demonstrated on nine scenarios of increasing complexity with features of interest for offshore renewable energy applications. When compared with steady-state results from a lumped-mass dynamic model, the results show that the quasi-static formulation accurately calculates profiles and tensions and that its analytic approach provides more efficient and reliable computation of system stiffness matrices than finite-differencing methods. These results verify the accuracy of the MoorPy model.

16 TIDAL AND WAVE POWER↗

Development of 80- and 100- Mile Work Day Cycles Representative of Commercial Pickup and Delivery Operation

When developing and designing new technology for integrated vehicle systems deployment, standard cycles have long existed for chassis dynamometer testing and tuning of the powertrain. However, to this day with recent developments and advancements in plug-in hybrid and battery electric vehicle technology, no true 'work day' cycles exist with which to tune and measure energy storage control and thermal management systems. To address these issues and in support of development of a range-extended pickup and delivery Class 6 commercial vehicle, researchers at the National Renewable Energy Laboratory in collaboration with Cummins analyzed 78,000 days of operational data captured from more than 260 vehicles operating across the United States to characterize the typical daily performance requirements associated with Class 6 commercial pickup and delivery operation. In total, over 2.5 million miles of real-world vehicle operation were condensed into a pair of duty cycles, an 80-mile cycle and a 100-mile cycle representative of the daily operation of U.S. class 3-6 commercial pickup and delivery trucks. Using novel machine learning clustering methods combined with mileage-based weighting, these composite representative cycles correspond to 90th and 95th percentiles for daily vehicle miles traveled by the vehicles observed. In addition to including vehicle speed vs time drive cycles, in an effort to better represent the environmental factors encountered by pickup and delivery vehicles operating across the United States, a nationally representative grade profile and key status information were also appended to the speed vs. time profiles to produce a 'work day' cycle that captures the effects of vehicle dynamics, geography, and driver behavior which can be used for future design, development, and validation of technology.

100 mile↗

Titan atmosphere models, 1973

The composition and structure of the atmosphere of Titan, based on theory and on spectroscopic and infrared data, is reviewed for the development of numerical engineering models. Light, nominal, and heavy atmospheres are described and tabulated, and their profiles of radius, temperature, pressure, and density are illustrated. Corresponding descriptions of atmospheric dynamics, condensates and surfaces are outlined.

Divine, N.↗

Lunar satellite techniques applicable to earth satellite geodesy

The techniques considered are related to gravity profiling from Doppler residuals, a solution for a surface mass distribution, and a dynamical approach for the estimation of random forces at each data point. The dynamical approach makes use of a new filtering method which uses sequential estimation theory to determine unknown and somewhat correlated forces which randomly perturb the orbit. It is concluded that lunar data reduction methods would be suitable for applications in connection with the GEOS-C/ATS-F mission.

Sjogren, W. L.↗

Transmission line model of the interaction of a long metal wire with the ionosphere

An equivalent electric circuit model is used to study the electrodynamic interactions of long orbiting metallic tethers with the ionospheric plasma and, in particular, to derive current and potential profiles along bare metallic tethers. In contrast with other models, this approach is dynamic, enabling both the transient behavior of the wire and its final equilibrium state to be derived. A comparison with the results of other models indicates the advantage of the present approach, especially in those cases where the internal resistance of the tether plays a major role in determining the current and potential distributions.

Arnold, D. A.↗

High-resolution ultraviolet solar observations from sounding rockets and Spacelab

High spatial (about 1 arcsec) and temporal (20 sec) resolution UV solar spectroscopy has been carried out by the Naval Research Laboratory from sounding rockets since 1975. The High Resolution Telescope and Spectrograph payload, consisting of a 300 mm diameter x 4500 mm focal length Cassegrain telescope and the tandem Woodsworth spectrograph, was used to make the observations. Using this instrument, a multitude of highly energetic phenomena can be observed in the chromosphere, transition zone, and corona. High-resolution photographs of the UV continuum at 1600 A, used to study the fine structure and evolution of the temperature minimum layer, show that because of its strong spatial and temporal intensity fluctuations, the 1600 A continuum emission comes from not only the temperature minimum, but a variety of temperature regimes. Similar spatial and temporal behavior is seen in lower chromospheric lines of Si I. Typical line profiles of the C IV 1550 A line illustrate the fine structure and dynamics of the transition zone; the mass and energy flux balance in this zone is also determined.

Brueckner, G. E.↗

The transfer function method for gear system dynamics applied to conventional and minimum excitation gearing designs

A transfer function method for predicting the dynamic responses of gear systems with more than one gear mesh is developed and applied to the NASA Lewis four-square gear fatigue test apparatus. Methods for computing bearing-support force spectra and temporal histories of the total force transmitted by a gear mesh, the force transmitted by a single pair of teeth, and the maximum root stress in a single tooth are developed. Dynamic effects arising from other gear meshes in the system are included. A profile modification design method to minimize the vibration excitation arising from a pair of meshing gears is reviewed and extended. Families of tooth loading functions required for such designs are developed and examined for potential excitation of individual tooth vibrations. The profile modification design method is applied to a pair of test gears.

Mark, W. D.↗

Numerical simulations of loops heated to solar flare temperatures. I - Gasdynamics. II - X-ray and UV spectroscopy

The NRL's Dynamic Flux Tube Model is used to numerically simulate the dynamic response of a coronal magnetic loop to an energy input of the order encountered in solar flares. The coronal plasma is heated by the deposition of flare energy at the top of the loop to more than 10 million K, yielding a conduction front that moves toward the chromosphere, where the plasma is heated by the large downward conductive flux and ablates upward to the coronal part of the loop at velocities of a few hundred km/sec. The conduction front simultaneously produces chromospheric ablation and compresses the material ahead of it. With the aid of compressional instabilities, the compressed plasma grows throughout the flare heating phase, presenting a possible source of the flare optical continuum emission which is correlated with soft X-ray radiation. The observational consequences of rapidly heated loop gas dynamic processes are discussed. In the second part of this presentation, the dynamical calculation results previously obtained are used to predict the spectral line intensities, profiles and wavelengths of several X-ray lines and the UV line of Fe XXI at 1354.1 A. Three different viewing orientations of the loop are considered.

Cheng, C.-C.↗

The High Spectral Resolution Lidar

The High Spectral Resolution Lidar (HSRL) system was developed for the remote measurement of atmospheric optical properties. Measurements are obtained by the separation of the backscattered signal into aerosol and molecular channels using a high spectral resolution Fabry-Perot optical interferometer to separate the aerosol contributions to backscatter near the laser wavelength from the Doppler-shifted molecular component of the backscatter. The transmitter consists of an optically pumped pulsed dye laser of the oscillator-amplifier design which emits at 467.88 nm, with a bandwidth of less than 0.3 pm. The transmitter and receiver share a common Schmidt-Cassegrain telescope, although they do not share the same field stop, but rather two conjugate stops. The HSRL system uses a computer-controlled dual-channel photon-counting data acquisition system providing for stable measurements at very low power levels and an excellent dynamic range. The system has been used to obtain airborne measurements of height profiles of aerosol and molecular backscatter cross sections.

Eloranta, E. W.↗

Robust attitude control for Cassini spacecraft flying by Titan

This paper summarizes a few years attitude control design work on Cassini spacecraft with emphasis on the mission of Titan flyby. The study consists of modeling of the spacecraft dynamics, fuel sloshing, aerodynamic disturbance, controller design, nonlinear simulation, and establishing geometric command profiles. Both classical bang-bang control and modern robust H-infinity control have been designed and evaluated in nonlinear simulation to access the system tracking performance. Design procedures as well as their critical design issues are discussed in detail. Full model nonlinear simulations indicate that a simple 12-state H-infinity controller achieves better radar tracking performance than the classical bang-bang controller with less fuel throughout the flyby mission. Detailed robustness analysis of both designs will be published elsewhere.

Chiang, R.↗

A parametric study of supersonic laminar flow for swept wings using linear stability analysis

A parametric study to predict the extent of laminar flow on the upper surface of a generic swept-back wing (NACA 64A010 airfoil section) at supersonic speeds was conducted. The results were obtained by using surface pressure predictions from an Euler/Navier-Stokes computational fluid dynamics code coupled with a boundary layer code, which predicts detailed boundary layer profiles, and finally with a linear stability code to determine the extent of laminar flow. The parameters addressed are Reynolds number, angle of attack, and leading-edge wing sweep. The results of this study show that an increase in angle of attack, for specific Reynolds numbers, can actually delay transition. Therefore, higher lift capability, caused by the increased angle of attack, as well as a reduction in viscous drag due to the delay in transition is possible for certain flight conditions.

Cummings, Russell M.↗

TRMM Field Campaigns: Objectives and Status Report

The Tropical Rainfall Measuring Mission (TRMM) satellite has been sending valuable data since launch in November 1997. Some of the key goals of the joint NASA (US) and NASDA (Japan) mission are: (1) to estimate the four-dimensional diabatic heating in the tropical and subtropical atmosphere, (2) understand the role of latent heating in driving tropical and extratropical circulations, (3) obtain monthly area-averaged estimates of rainfall over the data-sparse oceans, and (4) estimate the relative contribution of convective and stratiform precipitation over different regions during different seasons. The overarching scientific objective is to understand and improve estimates of rainfall and latent heating profiles throughout the global tropics. This requires observations for fundamental understanding of cloud dynamics and microphysics, as well as for validation, testing assumptions and error estimates of cloud-resolving models, forward radiative transfer models, algorithms used to estimate rainfall statistics and vertical structure of precipitation from surface-based radar, and from satellites. Field experiments designed to contribute to this understanding have been conducted in Texas and the South China Sea in spring of 1998, Florida in summer of 1998, and interior Brazil in (boreal) winter 1999. In summer 1999, a major oceanic campaign will be based at Kwajalein Atoll. Some early results will be highlighted, noting some significant contrasts between oceanic and continental convective systems.

Zipser, Edward I.↗

The Spatial Variation of Water and Ammonia near Jupiter's Great Red Spot

The CSHELL spectrometer at NASA's Infrared Telescope Facility was used in August 1996 to observe Jupiter at 5.18 microns. This wavelength sounds the 3-8 bar region in Jupiter's deep troposphere. A 1-arcsec-wide slit was aligned east-west on Jupiter and stepped from north to south across the Great Red Spot (GRS). Within our spectral bandpass are absorption lines of NH3 and a hot band of CH4. Radiative transfer models indicate that the strength of the CH4 feature is anti-correlated with gaseous H2O between 3 and 6 bars. The CH4 feature is predicted to be very strong for H2O abundances less than 10ppm and it should vanish when H2O > 300ppm. The depths of the observed CH4 and NH3 absorption features varied dramatically near the GRS. The center and east side (planetocentric) of the GRS is dry in both volatiles as indicated by strong CH4 absorption and a weak NH3 line. The CH4 line vanishes and the NH3 feature grows stronger on the west side of the GRS. We interpret this as due to a real variation in both volatiles - H2O and NH3 - due to a common dynamical mechanism. Water clouds are expected to be accompanied by saturated gaseous H2O profiles between 3 and 5 bars. The Galileo imaging team (Banfield et al 1998 Icarus 135, p230) deduced the presence of a cloud near the 4-bar level northwest of the GRS. Our data indicate that this same region is volatile rich; thus the combination of the two datasets provides a compelling case for a water cloud at this location. The deep volatile abundance does not correlate with 5-micron continuum opacity near the GRS. This suggests that the spatial variation of the 5-micron flux near the GRS is due primarily to NH3 clouds, rather than H2O clouds.

Bjoraker, G. L.↗

An Ecosystem Simulation Model for Methane Production and Emission from Wetlands

Previous experimental studies suggest that methane emission from wetland is influenced by multiple interactive pathways of gas production and transport through soil and sediment layers to the atmosphere. The objective of this study is to evaluate a new simulation model of methane production and emission in wetland soils that was developed initially to help identify key processes that regulate methanogenesis and net flux of CH4 to the air, but which is designed ultimately for regional simulation using remotely sensed inputs for land cover characteristics. The foundation for these computer simulations is based on a well-documented model (CASA) of ecosystem production and carbon cycling in the terrestrial blaspheme. Modifications to represent flooded wetland soils and anaerobic decomposition include three new sub-models for: (1) layered soil temperature and water table depth (WTD) as a function of daily climate drivers, (2) CH4 production within the anoxic soil layer as a function of WTD and CO2 production under poorly drained conditions, and (3) CH4 gaseous transport pathways (molecular diffusion, ebullition, and plant vascular transport) as a function of WTD and ecosystem type. The model was applied and tested using climate and ecological data to characterize tundra wetland sites near Fairbanks, Alaska studied previously by Whalen and Reeburgh. Comparison of model predictions to measurements of soil temperature and thaw depth, water-table depth, and CH4 emissions over a two year period suggest that inter-site differences in soil physical conditions and methane fluxes could be reproduced accurately for selected periods. Day-to-day comparison of predicted emissions to measured CH4 flux rates reveals good agreement during the early part of the thaw season, but the model tends to underestimate production of CH4 during the months of July and August in both test years. Important seasonal effects, including that of falling WTD during these periods, are apparently overlooked in the model formulation. Nevertheless, reasonably close agreement was achieved between the model's mean daily and seasonal estimates of CH4 flux and observed emission rates for northern wetland ecosystems. Several features of the model are identified as crucial to more accurate prediction of wetland methane emission, including the capacity to incorporate influences of localized topographic and hydrologic features on site-specific soil temperature and WTD dynamics, and mechanistic simulation of methane emission transport pathways from within the soil profile.

Potter, C. S.↗

Low Noise Amplifiers and Receivers for Remote Sensing

The study of atmospheric dynamics and climatology depend on accurate and frequent measurements of temperature and humidity profiles of the atmosphere. These measurements furthermore enable highly accurate measurements of ocean topography by providing total column water vapour data for radar path delay correction. The atmospheric temperature profile is characterized at the oxygen molecule absorption frequencies (60 and 118 GHz) and the humidity profile at the water molecule absorption frequencies (23 and 183 GHz). Total column measurements can be achieved by comparing measured radiometric temperatures at atmospheric window channels, such as 90, 130, and 166 GHz. The standard receiver technology for these frequencies was diode mixers with MMIC LNAs being applied at the lower frequencies. The sensitivity of millimeter wave receivers improved significantly with the introduction of the low noise 35 nm gate length InP MMIC amplifiers. We currently achieve 3 dB noise figure at 180 GHz and 2 dB noise figure at 90 GHz with our MMIC low noise amplifiers (LNAs) in room temperature. These amplifiers and the receivers we have built using them made it possible to conduct highly accurate airborne measurements campaigns from the Global Hawk unmanned aerial vehicle, develop millimeter wave internally calibrated radiometers for altimeter radar path delay correction, and build prototypes of large arrays of millimeter receivers for a geostationary interferometric sounder. We use the developed millimeter wave receivers to measure temperature and humidity profiles in the atmosphere and in hurricanes as well as to characterize the path delay error in ocean topography alitmetery.

low noise temperature↗

Low Noise Amplifiers and Receivers for Remote Sensing

The study of atmospheric dynamics and climatology depend on accurate and frequent measurements of temperature and humidity profiles of the atmosphere. These measurements furthermore enable highly accurate measurements of ocean topography by providing total column water vapour data for radar path delay correction. The atmospheric temperature profile is characterised at the oxygen molecule absorption frequencies (60 and 118 GHz) and the humidity profile at the water molecule absorption frequencies (23 and 183 GHz). Total column measurements can be achieved by comparing measured radiometric temperatures at atmospheric window channels, such as 90, 130 and 166 GHz. The standard receiver technology for these frequencies was diode mixers with MMIC LNAs being applied at the lower frequencies. The sensitivity of millimetre wave receivers improved significantly with the introduction of the low noise 35 nm gate length InP MMIC amplifiers. We currently achieve 3 dB noise figure at 180 GHz and 2 dB noise figure at 90 GHz with our MMIC low noise amplifiers (LNAs) in room temperature. These amplifiers and the receivers we have built using them made it possible to conduct highly accurate airborne measurement campaigns from the Global Hawk unmanned aerial vehicle, develop millimeter wave internally calibrated radiometers for altimeter radar path delay correction, and build prototypes of large arrays of millimeter receivers for a geostationary interferometric sounder. We use the developed millimeter wave receivers to measure temperature and humidity profiles in the atmosphere and in hurricanes as well as to characterize the path delay error in ocean topography altimetry.

low noise amplifier↗