Search NASA⌕ Search

SEARCH · Search NASA

Results for “Enhanced Sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Apolipoprotein C-II Is a Potential Serum Biomarker as a Prognostic Factor of Locally Advanced Cervical Cancer After Chemoradiation Therapy

Purpose: To determine pretreatment serum protein levels for generally applicable measurement to predict chemoradiation treatment outcomes in patients with locally advanced squamous cell cervical carcinoma (CC). Methods and Materials: In a screening study, measurements were conducted twice. At first, 6 serum samples from CC patients (3 with no evidence of disease [NED] and 3 with cancer-caused death [CD]) and 2 from healthy controls were tested. Next, 12 serum samples from different CC patients (8 NED, 4 CD) and 4 from healthy controls were examined. Subsequently, 28 different CC patients (18 NED, 10 CD) and 9 controls were analyzed in the validation study. Protein chips were treated with the sample sera, and the serum protein pattern was detected by surface-enhanced laser desorption and ionization–time-of-flight mass spectrometry (SELDI-TOF MS). Then, single MS-based peptide mass fingerprinting (PMF) and tandem MS (MS/MS)-based peptide/protein identification methods, were used to identify protein corresponding to the detected peak. And then, turbidimetric assay was used to measure the levels of a protein that indicated the best match with this peptide peak. Results: The same peak 8918 m/z was identified in both screening studies. Neither the screening study nor the validation study had significant differences in the appearance of this peak in the controls and NED. However, the intensity of the peak in CD was significantly lower than that of controls and NED in both pilot studies (P=.02, P=.04) and validation study (P=.01, P=.001). The protein indicated the best match with this peptide peak at 8918 m/z was identified as apolipoprotein C-II (ApoC-II) using PMF and MS/MS methods. Turbidimetric assay showed that the mean serum levels of ApoC-II tended to decrease in CD group when compared with NED group (P=.078). Conclusion: ApoC-II could be used as a biomarker for detection in predicting and estimating the radiation treatment outcome of patients with CC.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structure and photocatalytic activity studies of TiO{sub 2}-supported over Ce-modified Al-MCM-41

Ce-Al-MCM-41, TiO{sub 2}/Al-MCM-41 and TiO{sub 2}/Ce-Al-MCM-41 materials with varying contents of Ce (by impregnation) and TiO{sub 2} loaded (by solid-state dispersion) on Al-MCM-41 support are prepared. The Ce modified and TiO{sub 2} loaded composite systems are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis diffuse reflectance spectra (DRS) and X-ray photoelectron spectroscopy (XPS) techniques. The DRS and XPS of low Ce content (0.2-0.5 wt.%) modified Al-MCM-41 samples are showing more characteristic of Ce{sup 3+} species wherein cerium in interaction with Al-MCM-41 and that of high Ce (0.8, 3.0 wt.%) content modified samples are showing the characteristic of both Ce{sup 4+}and Ce{sup 3+}species. A series of Ce-modified Al-MCM-41 and TiO{sub 2} loaded composite catalysts are evaluated for photocatalytic degradation of phenol under UV irradiation. Low Ce content in Ce{sup 3+} state on Al-MCM-41 is showing good photoactivity in comparison with high Ce content samples and pure ceria. The composite TiO{sub 2}/Ce-Al-MCM-41 is showing enhanced degradation activity due decreased rate of electron-hole recombination on TiO{sub 2} surface by the redox properties of cerium. The photocatalyst TiO{sub 2}/Ce-Al-MCM-41 with an optimum of 10 wt.% TiO{sub 2} and 0.3 wt.% Ce is showing maximum phenol degradation activity. The possible mechanism of phenol degradation on the composite photocatalyst is proposed.

36 MATERIALS SCIENCE↗

Preparation of Fe-doped TiO{sub 2} nanotube arrays and their photocatalytic activities under visible light

Fe-doped TiO{sub 2} nanotube arrays have been prepared by the template-based liquid phase deposition method. Their morphologies, structures and optical properties were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction and UV-vis absorption spectroscopy. Their photocatalytic activities were evaluated by the degradation of methylene blue under visible light. The UV-vis absorption spectra of the Fe-doped TiO{sub 2} nanotube arrays showed a red shift and an enhancement of the absorption in the visible region compared to the undoped sample. The Fe-doped TiO{sub 2} nanotube arrays exhibited good photocatalytic activities under visible light irradiation, and the optimum dopant amount was found to be 5.9 at% in our experiments.

36 MATERIALS SCIENCE↗

A facile synthesis of ZnWO{sub 4} nanoparticles by microwave assisted technique and its application in photocatalysis

Highlights: ► Nanocrystalline ZnWO{sub 4} particles were successfully prepared by a microwave method. ► Spherical morphology with a 10 nm size. ► The band is 3.4 eV. ► The photodegradation of RhB was 95% within 25 min. - Abstract: A simple microwave assisted technique has been successfully developed to synthesize ZnWO{sub 4} nanoparticles. The X-ray diffraction results indicated that the synthesized nanoparticles exhibited only wolframite structure. Structural, morphological and optical properties of ZnWO{sub 4} nanoparticles have been analyzed by XRD, SEM, TEM EDAX, UV–vis and FT-IR spectral measurements. The transmission electron microscopy (TEM) image revealed that particle size of ZnWO{sub 4} nanoparticles was found to be 10 nm, the band-gap of ZnWO{sub 4} nanoparticles was found to be 3.4 eV. The photocatalytic activities for aqueous Rhodamine B and Methylene Blue samples were investigated and observed that ZnWO{sub 4} nanoparticles exhibited highly enhanced photocatalytic activity towards RhB than MB.

36 MATERIALS SCIENCE↗

Highly efficient deep desulfurization of fuels by meso/macroporous H3PW12O40/TiO2 at room temperature

Highlights: • A new kind of meso/macroporous structured HPW/TiO{sub 2} catalyst was prepared by monodispersed polystyrene spheres and quaternary ammonium bromide. • Quaternary ammonium bromide with longer alkyl chains length (STAB) was found to be the best mesostructure-directing agent in the synthesis of meso/macroporous HPW/TiO{sub 2} catalyst. • The influence of dosage of macroporous templates (monodispersed polystyrene spheres) and alkyl chains length of quaternary ammonium bromide on the textural of meso/macroporous HPW/TiO{sub 2} catalyst were investigated. • With proper PS spheres and quaternary ammonium bromide usage, disordered macropores arranged periodicity and led relatively larger pore size and pore volume. • The meso/macroporous HPW/TiO{sub 2} materials exhibited enhanced excellent desulfurization performance of thiophenic sulfur in model fuel than other samples. Dibenzothiophene can be completely removed within 2 h at 30 °C. - Abstract: This paper described the synthesis of meso/macroporous phosphotungstic acid (HPW) /TiO{sub 2} catalyst with quaternary ammonium bromide and monodispersed polystyrene spheres (PS) as dual-template. The synthetic parameters, such as concentration of the templates and the alky chain length of quaternary ammonium bromide was studied carefully and optimized to generate catalyst with regulated porous features. The chemical properties of the catalyst was also investigated, X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) measurements confirmed the Keggin-type HPW were highly dispersed on the TiO{sub 2} framework. The optimal meso/macroporous HPW/TiO{sub 2} catalyst exhibited excellent catalytic activity in the oxidation of refractory sulphur compounds such as benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT). DBT was removed within 2 h at 30 °C under selected reaction conditions and the apparent activation energy for DBT oxidation was calculated to be 45.7 kJ/mol. The high ODS reaction rate of catalyst could be attributed to the combination of unique meso/macroporous architecture allowing for efficient mass transport of reactants and products in pore channel and its high surface area, large mesoporous size, and pore volume enabling sufficient exposure of catalytic active sites. Moreover, the meso/macroporous HPW/TiO{sub 2} catalyst also exhibited excellent reusability with no obviously degradation even after eight cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of thermal treatment time on structural and physical properties of polyimide films at beginning of carbonization

Poly(4,4'-oxydiphenylene-oxydiphthalimide) (POO) was thermally treated at 773 K for 1, 15 and 60 min under argon atmosphere resulting in free-standing films with intermingled characteristics between polymer and carbon-rich derivatives. Degradative thermal analysis performed by pyrolysis-gas chromatography/mass spectroscopy (Py-GC/MS) revealed CO 2 among the major products of thermal decomposition which according to electron paramagnetic resonance (EPR) passed through a radical process. X-ray diffraction (XRD) revealed thermal treated samples with semicrystalline organization that was attributed to the development of lamellae structure. Moreover, Atomic force microscopy (AFM) showed an increase in the roughness of the samples that acquired pronounced roughcast-like surface. Hence, there was an enhancement of mechanical strength and dielectric permittivity. From the data collected a mechanism of thermal decomposition was proposed.

36 MATERIALS SCIENCE↗

Arsenic exposure at low-to-moderate levels and skin lesions, arsenic metabolism, neurological functions, and biomarkers for respiratory and cardiovascular diseases: Review of recent findings from the Health Effects of Arsenic Longitudinal Study (HEALS) in Bangladesh

The contamination of groundwater by arsenic in Bangladesh is a major public health concern affecting 35-75 million people. Although it is evident that high levels (> 300 {mu}g/L) of arsenic exposure from drinking water are related to adverse health outcomes, health effects of arsenic exposure at low-to-moderate levels (10-300 {mu}g/L) are not well understood. We established the Health Effects of Arsenic Longitudinal Study (HEALS) with more than 20,000 men and women in Araihazar, Bangladesh, to prospectively investigate the health effects of arsenic predominately at low-to-moderate levels (0.1 to 864 {mu}g/L, mean 99 {mu}g/L) of arsenic exposure. Findings to date suggest adverse effects of low-to-moderate levels of arsenic exposure on the risk of pre-malignant skin lesions, high blood pressure, neurological dysfunctions, and all-cause and chronic disease mortality. In addition, the data also indicate that the risk of skin lesion due to arsenic exposure is modifiable by nutritional factors, such as folate and selenium status, lifestyle factors, including cigarette smoking and body mass index, and genetic polymorphisms in genes related to arsenic metabolism. The analyses of biomarkers for respiratory and cardiovascular functions support that there may be adverse effects of arsenic on these outcomes and call for confirmation in large studies. A unique strength of the HEALS is the availability of outcome data collected prospectively and data on detailed individual-level arsenic exposure estimated using water, blood and repeated urine samples. Future prospective analyses of clinical endpoints and related host susceptibility will enhance our knowledge on the health effects of low-to-moderate levels of arsenic exposure, elucidate disease mechanisms, and give directions for prevention.

60 APPLIED LIFE SCIENCES↗

Magnetic excitations in strained infinite-layer nickelate PrNiO 2 films

Strongly correlated materials respond sensitively to external perturbations such as strain, pressure, and doping. In the recently discovered superconducting infinite-layer nickelates, the superconducting transition temperature can be enhanced via only ~ 1% compressive strain-tuning with the root of such enhancement still being elusive. Using resonant inelastic x-ray scattering (RIXS), we investigate the magnetic excitations in infinite-layer PrNiO 2 thin films grown on two different substrates, namely SrTiO 3 (STO) and (LaAlO 3 ) 0.3 (Sr 2 TaAlO 6 ) 0.7 (LSAT) enforcing different strain on the nickelates films. The magnon bandwidth of PrNiO 2 shows only marginal response to strain-tuning, in sharp contrast to the enhancement of the superconducting transition temperature T c in the doped superconducting samples. These results suggest the bandwidth of spin excitations of the parent compounds is similar under strain while T c in the doped ones is not, and thus provide important empirics for the understanding of superconductivity in infinite-layer nickelates.

36 MATERIALS SCIENCE↗

Asymmetric magnetization reversal process in Co nanohill arrays

Co thin films deposited by sputtering onto nanostructured polymer [poly(methyl methacrylate)] were prepared following replica-antireplica process based on porous alumina membrane. In addition, different capping layers were deposited onto Co nanohills. Morphological and compositional analysis was performed by atomic force microscopy and x-ray photoemission spectroscopy techniques to obtain information about the surface characteristics. The observed asymmetry in the magnetization reversal process at low temperatures is ascribed to the exchange bias generated by the ferromagnetic-antiferromagnetic interface promoted by the presence of Co oxide detected in all the samples. Especially relevant is the case of the Cr capping, where an enhanced magnetic anisotropy in the Co/Cr interface is deduced.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High-Energy Diffraction-Enhanced X-ray Imaging

In order to apply the diffraction-enhanced X-ray imaging (DEI) method for much wider variety of samples, we have developed the high-energy DEI system. The energy of X-ray was increased up to 70 keV to achieve high permeability for heavy elements. The diffraction of Si(440) was used to keep large field of view. Demonstrative observation of an electrical cable was performed using the X-ray emitted from the vertical wiggler. The obtained images visualized not only the core and ground wire made of copper but also the isolator and outer jacket made of polymer clearly. The comparison of images obtained by the DEI and the absorption-contrast imaging showed that the sensitivity of DEI is about 10 times higher than that of the absorption method for light elements, and 3 times for heavy elements.

07 ISOTOPE AND RADIATION SOURCES↗

The mechanism of low-k SiOCH film modification by oxygen atoms

The interaction of oxygen atoms with three types of plasma enhanced chemical vapor deposition low-k SiOCH films is studied. The samples were treated by O atoms in the far plasma afterglow conditions in a special experimental system designed for this study. The experimental system allowed avoiding the effect of ions and vacuum ultraviolet (VUV) photons on surface reactions and controlling the oxygen atom concentration over the samples. Fourier-transform infrared spectroscopy, x-ray fluorescence, and atomic force microscopy techniques were used to analyze the changes occurring in low-k films. Monte Carlo model for O atom interaction with low-k material that includes penetration, recombination, and reactions with methyl groups was developed. It is shown that the surface recombination on the pore wall surface determines the profile and penetration depth of O atoms into the films. The reaction of O atoms with methyl groups has lower probability and therefore proceeds in the background mode.

36 MATERIALS SCIENCE↗

Simultaneous Sterilization With Surface Modification Of Plastic Bottle By Plasma-Based Ion Implantation

Dry sterilization of polymeric material is developed. The technique utilizes the plasma-based ion implantation which is same as for surface modification of polymers. Experimental data for sterilization are obtained by using spores of Bacillus subtilis as samples. On the other hand we previously showed that the surface modification enhanced the gas barrier characteristics of plastic bottles. Comparing the implantation conditions for the sterilization experiment with those for the surface modification, we find that both sterilization and surface modification are simultaneously performed in a certain range of implantation conditions. This implies that the present bottling system for plastic vessels will be simplified and streamlined by excluding the toxic peroxide water that has been used in the traditional sterilization processes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two-color interferometry and shadowgraphy characterization of an orthogonal double-pulse laser ablation

Orthogonal double pulse laser ablation on aluminum target at atmospheric pressure was studied by time-resolved optical emission spectroscopy, shadowgraphy and two-color interferometry. Studies were realized as a function of the distance from the first pulse plasma induced in air to the sample surface. The evolution of the electron and neutral particles densities were determined by two-color interferometry. Line intensification mechanisms are discussed based on the interferometry results and the plumes interaction dynamics. It was found that the sample heating by the preablation pulse could contribute to the observed emission enhancement.

36 MATERIALS SCIENCE↗

Enhancement in the multiferroic properties of BiFeO{sub 3} by charge compensated aliovalent substitution of Ba and Nb

Polycrystalline ceramics, Bi{sub 1-2x}Ba{sub 2x}Fe{sub 1-x}Nb{sub x}O{sub 3} (x = 0.00–0.15), were synthesized by solid state reactions method. X-ray diffraction data have revealed elimination of impurity phases and an increase in unit cell volume with Ba and Nb substitution. Diffraction peak splitting is found to be suppressed which indicates a decrease in octahedral distortion. The Mössbauer spectra demonstrate the suppression of spiral spin modulation of the magnetic moments resulting in enhanced ferromagnetism with increasing dopant concentration. The leakage current density of the sample with x = 0.10 is found to be greatly reduced up to six orders of magnitude as compared to the undoped sample. Ohmic conduction is found to be dominant mechanism in all the samples, however, undoped sample showed space charge limited conduction in high electric filed region, while the sample with x = 0.15 exhibited grain boundary limited conduction in low electric field region.

36 MATERIALS SCIENCE↗

Al insertion and additive effects on the thermoelectric properties of yttrium boride

The aluminoboride Y{sub x}Al{sub y}B{sub 14} (x ∼ 0.57, 0.41 ≤ y ≤ 0.63) has been found to show striking p-n control of the thermoelectric properties through variations of the y occupancy of the Al site. The effect of Al was investigated in further extremes. Polycrystalline samples of Al-free Y{sub x}B{sub 14}(x ∼ 0.55; “YB{sub 25}”) were successfully synthesized in sufficient amounts for bulk spark plasma sintering (SPS) samples and their thermoelectric properties were investigated. Y{sub 0.56}Al{sub 0.57}B{sub 14} was also prepared in comparison, and further Al was added to the samples through SPS treatment. We observed that Y{sub 0.55}B{sub 14} exhibits large positive Seebeck coefficients, ∼1000 μV K{sup −1}, around room temperature and the absolute value of the Seebeck coefficient largely decreases with increase of temperature while that of Y{sub 0.56}Al{sub 0.57}B{sub 14} is proportional to T{sup −1/2}, indicating a strong effect of Al on the electronic structure around the Fermi level. Y{sub 0.55}B{sub 14} was found to be strongly disordered with a relatively low thermal conductivity and short localization length of 0.65 Å which is close to that previously determined for the disordered and thermally glass-like compound YB{sub 66}. Occupancy of Al could not be increased further for the Al-rich sample, although Al was discovered to act as a sintering aid to enhance density and ZT could be significantly improved by 50%.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and dielectric properties of Nd/Ca co-doped bi-ferrite multiferroics

Single-phase polycrystalline samples of Bi{sub 0.8}Nd{sub 0.2−x}Ca{sub x}FeO{sub 3} (x = 0.0, 0.1) were synthesized by chemical coprecipitation method. X-ray diffraction patterns accompanied by Rietveld-refined crystal structure parameters reveal the phase transition of Bi{sub 0.8}Nd{sub 0.1}Ca{sub 0.1}FeO{sub 3} with rhombohedral R3c symmetry to triclinic structure of Bi{sub 0.8}Nd{sub 0.2}FeO{sub 3} sample. Frequency dependence of dielectric constant (ε') and dielectric loss (tanδ), infers enhancement of both ε' (tanδ) in narrow band gap of Nd/Ca co-doped BFO as compare to wide band pristine BFO.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modulated magnetoelectric property of BiFeO{sub 3} incorporated in Co{sub 0.50}Fe{sub 0.50}Fe{sub 2}O{sub 4}

Nanocomposite of (BiFeO{sub 3}){sub 0.50} (Co{sub 0.50}Fe{sub 0.50}Fe{sub 2}O{sub 4}){sub 0.50} were prepared by using a chemical coprecipitation method. X- ray diffraction (XRD) was recorded to confirm the desired crystallographic phase of the sample. The nanocrystallite size of each component including their average size was calculated from the broadening of the XRD peaks using the well known Debye-Scherrer equation. To confirm the presence of the onset of magnetic ordering in ac hysteresis loops were recorded. The dielectric and ferroelectric property was also confirmed the presence of electric ordering in the sample at room temperature. The magnetic property of BFO has been substantially enhanced by the strong magnetic host of Co{sub 0.50}Fe{sub 0.50}Fe{sub 2}O{sub 4}.

36 MATERIALS SCIENCE↗

Enhanced emission and photoconductivity due to photo-induced charge transfer from Au nanoislands to ZnO

We report systematic studies based on photoluminescence, Hall, and photoconductivity measurements together with theoretical modeling in order to identify mechanisms for the photo-induced charge transfer effects in ZnO thin film incorporated with the Au nano-islands (AuNIs). Significant enhancement of near band edge emission and improvement in conductivity of ZnO/AuNIs samples after illumination are observed, which are attributed to the photo-induced hot electrons in Au which are then transferred into the conduction band of ZnO as long as the excitation energy is higher than the offset between the ZnO conduction-band minimum and Au Fermi level. Our experimental results are consistent with the general features predicted by first principles calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗