Search NASA⌕ Search

SEARCH · Search NASA

Results for “Estimation method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Planetary Protection Trajectory Analysis for the Juno Mission

Juno is an orbiter mission expected to launch in 2011 to Jupiter. Juno's science orbit is a highly eccentric orbit with a period of about 11 days and a nominal duration of one year. Initially, the equatorial crossing near apojove occurs outside Callisto's orbit, but as the mission evolves the apsidal rotation causes this distance to move much closer to Jupiter. This motion could lead to potential impacts with the Galilean satellites as the ascending node crosses the satellite orbits. In this paper, we describe the method to estimate impact probabilities with the satellites and investigate ways of reducing the probabilities for the Juno mission.

Lam, Try↗

Aeroelastic Analysis of a Flexible Wing Wind Tunnel Model with Variable Camber Continuous Trailing Edge Flap Design

This paper presents data analysis of a flexible wing wind tunnel model with a variable camber continuous trailing edge flap (VCCTEF) design for drag minimization tested at the University of Washington Aeronautical Laboratory (UWAL). The wind tunnel test was designed to explore the relative merit of the VCCTEF concept for improved cruise efficiency through the use of low-cost aeroelastic model test techniques. The flexible wing model is a 10%-scale model of a typical transport wing and is constructed of woven fabric composites and foam core. The wing structural stiffness in bending is tailored to be half of the stiffness of a Boeing 757-era transport wing while the torsional stiffness is about the same. This stiffness reduction results in a wing tip deflection of about 10% of the wing semi-span. The VCCTEF is a multi-segment flap design having three chordwise camber segments and five spanwise flap sections for a total of 15 individual flap elements. The three chordwise camber segments can be positioned appropriately to create a desired trailing edge camber. Elastomeric material is used to cover the gaps in between the spanwise flap sections, thereby creating a continuous trailing edge. Wind tunnel data analysis conducted previously shows that the VCCTEF can achieve a drag reduction of up to 6.31% and an improvement in the lift-to-drag ratio (L=D) of up to 4.85%. A method for estimating the bending and torsional stiffnesses of the flexible wingUWAL wind tunnel model from static load test data is presented. The resulting estimation indicates that the stiffness of the flexible wing is significantly stiffer in torsion than in bending by as much as 9 to 1. The lift prediction for the flexible wing is computed by a coupled aerodynamic-structural model. The coupled model is developed by coupling a conceptual aerodynamic tool Vorlax with a finite-element model of the flexible wing via an automated geometry deformation tool. Based on the comparison of the lift curve slope, the lift prediction for the rigid wing is in good agreement with the estimated lift coefficients derived from the wind tunnel test data. Due to the movement of the VCCTEF during the wind tunnel test, uncertainty in the lift prediction due to the indicated variations of the VCCTEF deflection is studied. The results show a significant spread in the lift prediction which contradicts the consistency in the aerodynamic measurements, thus suggesting that the indicated variations as measured by the VICON system may not be reliable. The lift prediction of the flexible wing agrees very well with the measured lift curve for the baseline configuration. The computed bending deflection and wash-out twist of the flexible wing also match reasonably well with the aeroelastic deflection measurements. The results demonstrate the validity of the aerodynamic-structural tool for use to analyze aerodynamic performance of flexible wings.

Wind Tunnel↗

L'CO/LFIR Relations with CO Rotational Ladders of Galaxies Across the Herschel SPIRE Archive

We present a catalog of all CO (carbon monoxide) (J (total angular momentum quantum number) equals 1-0 through J equals 13-12), [CI], and [NII] lines available from extragalactic spectra from the Herschel SPIRE (Spectral and Photometric Imaging Receiver) Fourier Transform Spectrometer (FTS) archive combined with observations of the low-J CO lines from the literature and from the Arizona Radio Observatory. This work examines the relationships between L (sub FIR (Far Infra Red)), L prime (sub CO), and L (sub CO) / L (sub CO, 1-0). We also present a new method for estimating probability distribution functions (PDFs) from marginal signal-to-noise ratio Herschel FTS spectra, which takes into account the instrumental "ringing" and the resulting highly correlated nature of the spectra. The slopes of Log (L (sub FIR)) versus Log (L prime (sub CO)) are linear for all mid- to high-J CO lines. The mid- to high-J CO luminosity relative to CO J equals 1-0 increases with increasing L (sub FIR), indicating higher excitement of the molecular gas, though these ratios do not exceed approximately 100. The luminosities relative to CO J equals 1-0 remain relatively at from J equals 6-5 through J equals13-2, across many orders of magnitude of L (sub FIR). Qualitative comparisons to current theoretical models do not match these flat SLED (spectral line energy distributions) shapes, indicating the need for more comprehensive modeling of the excitation processes of warm molecular gas in nearby galaxies.

Submillimeter Data↗

Piloted Simulator Evaluation of Maneuvering Envelope Information for Flight Crew Awareness

The implementation and evaluation of an efficient method for estimating safe aircraft maneuvering envelopes are discussed. A Bayesian approach is used to produce a deterministic algorithm for estimating aerodynamic system parameters from existing noisy sensor measurements, which are then used to estimate the trim envelope through efficient high- fidelity model-based computations of attainable equilibrium sets. The safe maneuverability limitations are extended beyond the trim envelope through a robust reachability analysis derived from an optimal control formulation. The trim and maneuvering envelope limits are then conveyed to pilots through three axes on the primary flight display. To evaluate the new display features, commercial airline crews flew multiple challenging approach and landing scenarios in the full motion Advanced Concepts Flight Simulator at NASA Ames Research Center, as part of a larger research initiative to investigate the impact on the energy state awareness of the crew. Results show that the additional display features have the potential to significantly improve situational awareness of the flight crew.

maneuvers↗

Using Probabilistic Methods in Water Scarcity Assessments: A First Step Towards a Water Scarcity Risk Assessment Framework

Water scarcity -driven by climate change, climate variability, and socioeconomic developments- is recognized as one of the most important global risks, both in terms of likelihood and impact. Whilst a wide range of studies have assessed the role of long term climate change and socioeconomic trends on global water scarcity, the impact of variability is less well understood. Moreover, the interactions between different forcing mechanisms, and their combined effect on changes in water scarcity conditions, are often neglected. Therefore, we provide a first step towards a framework for global water scarcity risk assessments, applying probabilistic methods to estimate water scarcity risks for different return periods under current and future conditions while using multiple climate and socioeconomic scenarios.

water scarcity↗

Coronal Magnetic Field Profiles from Shock-CME Standoff Distances

Coronagraphs observe coronal mass ejections (CMEs) and driven shocks in white light images.From these observations the shocks speed and the shocks standoff distance from the CMEs leading edge can be derived. Using these quantities, theoretical relationships between the shocks Alfvenic Mach number MA and standoff distance, and empirical radial profiles for the solar wind velocity and number density, the radial magnetic field profile upstream of the shock can be calculated. These profiles cannot be measured directly. We test the accuracy of this method for estimating the radial magnetic field profile upstream of the shock by simulating a sample CME that occurred on 29 November 2013 using the three-dimensional (3-D) magnetohydrodynamic Block-Adaptive-Tree-Solar wind-Roe-Upwind-Scheme code, retrieving shock-CME standoff distances from the simulation, and comparing the estimated and simulated radial magnetic field profiles. We find good agreement between the two profiles (within +/-30%) between 1.8 and 10R.Our simulations confirm that a linear relationship exists between the standoff distance and the inverse compression ratio at the shock. We also find very good agreement between the empirical and simulated radial profiles of the number density and speed of the solar wind and inner corona.

Schmidt, J. M.↗

Analysis of Convective Weather Impact on Pre-Departure Routing of Flights from Fort Worth Center to New York Center

In response to severe weather conditions, Traffic Managers specify flow constraints and reroutes to route air traffic around affected regions of airspace. Providing analysis and recommendations of available reroute options and associated airspace capacities would assist Traffic Managers in making more efficient decisions in response to convective weather. These recommendations can be developed by examining historical data to determine which previous reroute options were used in similar weather and traffic conditions. This paper describes the initial steps and methodology used towards this goal. The focus of this work is flights departing from Fort Worth Center destined for New York Center. Dominant routing structures used in the absence of convective weather are identified. A method to extract relevant features from the large volume of weather data available to quantify the impact of convective weather on this routing structure over a given time range is presented. Finally, a method of estimating flow rate capacity along commonly used routes during convective weather events is described. Results show that the flow rates drop exponentially as a function of the values of the proposed feature and that convective weather on the final third of the route was found to have a greater impact on the flow rate restriction than other portions of the route.

traffic flow management↗

Connecting Paleo and Modern Oceanographic Data to Understand Atlantic Meridional Overturning Circulation Over Decades to Centuries

Modeling is an important tool for understanding AMOC on all timescales. Mechanistic studies of modern AMOC variability have been hampered by a lack of consistency between free-running models and the sensitivity of AMOC to resolution and parameterization. Recent work within the framework of the phase two Coordinated Ocean- Reference Experiments (CORE-II) addresses this issue head on, looking at model differences of AMOC mean state and interannual variability. One consistent feature across the models is that AMOC mean transport is related to mixed layer depths and Labrador Sea salt content, whereas interannual variability is primarily associated with Labrador Sea temperature anomalies. This is consistent with the hypothesized importance of salt balance for AMOC variability on geological timescales. The simulated relationships between AMOC and subsurface temperature anomalies in fully coupled climate models reveal subsurface AMOC fingerprints that could be used to reconstruct historical AMOC variations at low frequency.With the lack of long-term AMOC observations, models of ocean state that assimilate observational data have been explored as a way to reconstruct AMOC, but comparisons between models indicate they are quite variable in their AMOC representations. Karspeck et al. (2015) found that historical reconstructions of AMOC in such models are sensitive to the details of the data assimilation procedure. The ocean data assimilation community continues to address these issues through improved models and methods for estimating and representing error information.Two objectives of paleoclimate modeling are 1) to provide mechanistic information for interpretation of paleoclimate observations, and 2) to test the ability of predictive models to simulate Earth's climate under different background forcing states. In a good example of the first objective, Schmittner and Lund (2015) and Menviel et al. (2014) provided key information about the proxy signals expected under freshwater disturbance of AMOC, which were used to support the paleoclimate observations made by Henry et al. (2016). In an example of the second objective, Muglia and Schmittner (2015) analyzed Third Paleoclimate Modeling Intercomparison Project (PMIP3) models of the Last Glacial Maximum (LGM) and found consistently more intense and deeper AMOC transports relative to preindustrial simulations, counter to the paleoclimate consensus of LGM conditions, indicating that some processes are not well represented in the PMIP3 models. One challenge is to find adequate paleo observations against which to test these models. PMIP is now in phase 4 (part of CMIP6), which includes experiments covering five periods in Earth's history: the last millennium, last glacial maximum, last interglacial, and the mid-Pliocene. Newly compiled paleoclimate datasets from the PAGES2k project, more transient simulations, and participation of isotope enabled models planned for CMIP6PMIP4 will enable richer paleo data-model comparisons in the near future.

Kilbourne, Hali↗

Interpreting the Helioseismic and Magnetic Imager (HMI) Multi-Height Velocity Measurements

The Solar Dynamics Observatory Helioseismic and Magnetic Imager (SDOHMI) filtergrams, taken at six wavelengths around the Fe I 6173.3 Å line, contain information about the line-of-sight velocity over a range of heights in the solar atmosphere. Multiheight velocity inferences from these observations can be exploited to study wave motions and energy transport in the atmosphere. Using realistic convection-simulation datasets provided by the STAGGER and MURaM codes, we generate synthetic filtergrams and explore several methods for estimating Dopplergrams.We investigate at which height each synthetic Dopplergram correlates most strongly with the vertical velocity in the model atmospheres. On the basis of the investigation, we propose two Dopplergrams other than the standard HMI-algorithm Dopplergram produced from HMI filtergrams: a line-center Dopplergram and an average-wing Dopplergram. These two Dopplergrams correlate most strongly with vertical velocities at the heights of 30 40 km above (line center) and 30 40 km below (average wing) the effective height of the HMI-algorithm Dopplergram. Therefore, we can obtain velocity information from two layers separated by about a half of a scale height in the atmosphere, at best. The phase shifts between these multi-height Dopplergrams from observational data as well as those from the simulated data are also consistent with the height-difference estimates in the frequency range above the photospheric acoustic-cutoff frequency.

velocity fields↗

Convergence Analysis of Turbulent Flow Solutions

Data from the "Turbulence Modeling Resource" website for turbulent flow over an NACA-0012 airfoil is analyzed to determine the convergence behavior of three second-order CFD (Computational Fluid Dynamics) codes: CFL3D (Computational Fluids Lab 3 Dimensional flow solver), FUN3D (Fully Unstructured Navier-stokes flow solver), and TAU (German Aerospace Center (DLR) 2 dimensional code for unstructured hybrid grids solving the Reynolds-Averaged Navier-Stokes equations or the Euler equations). The convergence of both integrated properties and pointwise data are examined. Several different methods for estimating errors and computing convergence rates are compared. A high-order extension to the Richardson extrapolation is developed that improves the accuracy of the mesh limit values and provides a quantitative estimate of the threshold of the asymptotic regime. The coefficient of total drag exhibits second-order convergence for all three codes, and convergence is monotone over a sequence of 7 grids. Other force coefficients are not so well behaved. The convergence rates of the viscous component of drag on the three nest grids ranges from 3:0 for CFL3D to 1:0 for FUN3D. The three codes are converging to similar but not identical solutions. The largest differences between the codes are in the coefficient of lift for which the difference between CFL3D and FUN3D is greater than 10 (sup minus 4). The best agreement occurs in the viscous component of drag, which is the only force component for which all three codes are converging towards each other at a rate of second-order. The agreement between the two unstructured grid codes is good with all properties except lift converging towards common values at a rate of second-order. No one code was universally better than the other. The TAU code has the lowest error in total drag, FUN3D has the lowest error in lift, and CFL3D has the lowest error in the viscous component of drag.

Atkins, Harold L.↗

Assessment and Validation of Collision "Consequence" Method of Assessing Orbital Regime Risk Posed by Potential Satellite Conjunctions

Collision risk management theory requires a thorough assessment of both the likelihood and consequence of potential collision events. Satellite conjunction risk assessment has produced a highly-developed theory for assessing the likelihood of collision but neglects to account for the consequences of a given collision. While any collision may compromise the operational survival of a spacecraft, the amount of debris produced by the potential collision, and therefore the degree to which the orbital corridor may be compromised, can vary greatly among satellite conjunctions. Previous studies leveraged work on satellite collision modeling to develop a method to estimate whether a particular collision is likely to produce a relatively large or relatively small amount of resultant debris. The approximation of the number of debris pieces is dependent on a mass estimation process for the secondary objects utilizing the radar cross section of said object. This study examines the validity of the mass estimation process and establishes uncertainty bounds on the secondary object mass, which will be used to best approximate the possible consequences of a potential collision. This process is then applied to a large set of historical conjunctions to assess the frequency at which possible collisions may significantly augment the orbital debris environment in operational spacecraft.

Collision Consequence↗

Magnetic Shield Design Modeling and Validation on SWOT Spacecraft Applied to Mars Flux Pinning Orbiting Sample Design

A modeling methodology was developed for use on the Surface Water and Ocean Topography (SWOT) mission for the computational modeling and design of a magnetic shield for a 63 A-sq m source. Shield options were modeled and tested across various design parameters and validated with measurement. Measurement results fell within 10% of simulation in most cases of concern with sources of error well understood. These methods results informed a subsequent modeling activity for a future Mars Sample Return (MSR) mission concept with stringent magnetic cleanliness requirements to retain geologic integrity of the samples. One option for capturing the sample from orbit requires rare earth magnets in close proximity to the Martian samples. Magnetic modeling with a finite-element method solver estimated the magnetic environment and established the need for shielding. Further modeling then determined the shielding necessary to meet magnetic requirements, followed by the design of a mass-optimized solution.

Gonzales, Edward↗

Determining Appropriate Risk Remediation Thresholds from Empirical Conjunction Data Using Survival Probability Methods

Satellites sometimes maneuver before conjunctions to remediate the risk of an on-orbit collision. Many missions use probability of collision (P(sub c)) thresholds to decide when such maneuvers should be performed. These thresholds tend to be conservative because of policies that require satellites survive their lifetimes without collision with high confidence (e.g., 99.9%). This study presents a semi-empirical method to estimate remediation P(sub c) thresholds that satisfy such lifetime risk requirements. The formulation combines survival probability analysis with empirical conjunction histories to estimate remediation thresholds as a function of satellite size, remaining on-orbit duration, lifetime collision probability limit, collision consequence, and other parameters.

Risk remediation thresholds↗

Design and Modeling of the Off-Axis Parabolic Deformable (OPD) Mirror Laboratory

Coronagraph-equipped direct imaging missions need an active wavefront control system to cancel out the optical aberrations that degrade the performance of the coronagraphs. A fast steering mirror is used to control Line-of-Sight (LoS) pointing error caused by the telescope jitter. In addition to controlling other low-order aberrations such as astigmatism and coma, high stroke, high actuator density deformable mirrors (DMs) are also used to control the electric field at the required high spatial frequencies. We are designing a testbed to verify a different deformable architecture, where the powered optic in the optical train are controllable and have lower actuator count compared to the existing DMs with flat nominal surfaces. This simplifies the packaging issue for space missions and reduces both cost and risk of having the entire coronagraph instrument's performance depending on one or two high-actuator count DMs. The testbed would also be capable of testing different low-order wavefront sensing algorithms, which focuses in the near-term on a new adaptive Kalman filtering and gradient decent method to estimate the harmonic LoS errors that affect space telescopes. In long run, we would test different machine learning techniques to estimate low-order aberrations and non-linear algorithms for digging the region of high contrast called the dark holes (DH).

Subedi, Hari↗

Design and Modeling of the Off-Axis Parabolic Deformable Mirror Laboratory

Coronagraph-equipped direct imaging missions need an active wavefront control system to cancel out the optical aberrations that degrade the performance of the coronagraphs. A fast steering mirror is used to control Line-of-Sight (LoS) pointing error caused by the telescope jitter. In addition to controlling other low-order aberrations such as astigmatism and coma, high stroke, high actuator density deformable mirrors (DMs) are also used to control the electric field at the required high spatial frequencies. We are designing a testbed to verify a different deformable architecture, where the powered optic in the optical train are controllable and have lower actuator count compared to the existing DMs with flat nominal surfaces. This simplifies the packaging issue for space missions and reduces both cost and risk of having the entire coronagraph instrument's performance depending on one or two high-actuator count DMs. The testbed would also be capable of testing different low-order wavefront sensing algorithms, which focuses in the near-term on a new adaptive Kalman filtering and gradient decent method to estimate the harmonic LoS errors that affect space telescopes. In long run, we would test different machine learning techniques to estimate low-order aberrations and non-linear algorithms for digging the region of high contrast called the dark holes (DH).

Communication↗

Completeness Index for Earthquake-Induced Landslide Inventories

Understanding the global relation between Earthquake-Induced Landslides (EQILs) and the factors contributing to their initiation is still an open topic within the geomorphological community. Accessing EQIL inventories and analyzing them concerning their potential causes is the key to explore such relation. However, each of the existing EQIL inventories has its level of completeness and associated uncertainty which makes any unified relationship which is challenging to obtain. So far, the completeness of EQIL inventories has never been clearly defined. As a result, it has never been accounted for in global EQIL predictive models. In this technical note, we propose a simple definition for the completeness of EQIL inventories. We analyze 30 digital EQIL for 21 earthquakes and develop a semi-quantitative method to estimate the completeness level, which we refer to as Completeness Index (CI). The CI results from a combination of topographic factors, ground shaking parameters, and a measure derived from landslide size statistics. The proposed CI consists of Low, Moderate, and High completeness classes which can be used to evaluate any landslide inventory. We made the whole procedure to compute the CI accessible in an ArcGIS toolbox together with a test dataset.

Hakan Tanyas↗

Vegetation Monitoring Optimization with Normalized Difference Vegetation Index and Evapotranspiration Using Remote Sensing Measurements and Land Surface Models Over East Africa

The majority of people in East Africa rely on the agro-pastoral system for their livelihood, which is highly vulnerable to droughts and flooding. Agro-pastoral droughts are endemic to the region and are considered the main natural hazard that contributes to food insecurity. Drought begins with rainfall deficit, gradually leading to soil moisture deficit, higher land surface temperature, and finally impacts to vegetation growth. Therefore, monitoring vegetation conditions is essential in understanding the progression of drought, potential effects on food security, and providing early warning information needed for drought mitigation decisions. Because vegetation processes couple the land and atmosphere, monitoring of vegetation conditions requires consideration of both water provision and demand. While there is consensus in using either the Normalized Difference Vegetation Index (NDVI) or evapotranspiration(ET) for vegetation monitoring, a comprehensive assessment optimizing the use of both has not yet been done. Moreover, the evaluation methods for understanding the relationships between NDVI and ET for vegetation monitoring are also limited. Taking these gaps into account we have developed a framework to optimize vegetation monitoring using both NDVI and ET by identifying where they perform the best by using triple collocation and cross-correlation methods. We estimated the random error structure in Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI; ET from the Operational Simplified Surface Energy Balance (SSEBop) model; and ET from land surface models (LSMs). LSM ET and SSEBop ET have been found to be better indicators for vegetation monitoring during extreme drought events, while NDVI could provide better information on vegetation condition during wetter than normal conditions. The random error structures of these variables suggest that LSM ET is most likely to provide important information for vegetation monitoring over low and high ends of the vegetation fraction areas. Over moderate vegetative areas, any of these variables could provide important vegetation information for drought characterization and food security assessments. While this study provides a framework for optimizing vegetation monitoring for drought and food security assessments over East Africa, the framework can be adopted to optimize vegetation monitoring over any other drought and food insecure region of the world.

triple collocation↗