Search NASA⌕ Search

SEARCH · Search NASA

Results for “FORCES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Decay of Electrostatic Force of Dust Particles on Photovoltaic Modules

Photovoltaic (PV) energy yield loss due to solar module soiling has become increasingly important as solar module deployment is now at the hundreds of gigawatts scale and continues to grow rapidly. We have reported on direct measurements-using atomic force microscopy (AFM)-of strong electric-field-induced attraction and adhesion force (Fes) of dust particles onto solar panel that are 1 to 2 orders of magnitude stronger than the van der Waals and water capillary forces, corroborated by observing the increase in system voltage-induced soiling rate. Here, we report another characteristic of Fes on soiling-long lasting or slow decay after turning off the high voltage applied to solar panels. The Fes decay time varies in a wide time range of 1 to 10 hours, depending on two factors: 1) either/both the cell or/and particle were charged with high voltage before the voltages were turned off; and 2) how the cell was connected to the ground after the voltage was turned off-either connected through the power supply electronics, directly connected to the ground, or electrically floated. The Fes decay is understood in terms of 1) net electrical charge dissipations in both particle and cell, 2) thermal disordering of dipole polarization in the module glass dielectrics, and 3) charge redistribution by the electrostatic interaction of particle and module glass. This long-lasting Fes for hours can significantly affect the solar panel soiling after sunset, especially combined with water condensation.

14 SOLAR ENERGY↗

Atomic force microscopy of silica nanoparticles and carbon nanohorns in macrophages and red blood cells

The emerging interest in understanding the interactions of nanomaterial with biological systems necessitates imaging tools that capture the spatial and temporal distributions and attributes of the resulting nano-bil amalgam. Studies targeting organ specific response and/ot nanoparticle-specific system toxicity would be profoundly benefited from tools that would allow imaging and tracking of in-vivo or in-vitro processes and particle-fate studies. Recently we demonstrated that mode systhesizing atomic force microscopy (MSAFM) can provide subsurface nanoscale informations on the mechanical properties of materials at the nanoscale. However, the underlying mechanism of this imaging methodology is currently subject to theoretical and experimental investigation. In this paper we present further analysis by investigating tip-sample excitation forces associated with nanomechanical image formation. Images and force curves acquired under various operational frequencies and amplitudes are presented. We examine samples of mouse cells, where buried distributions of single-walled carbon nanohorns and silica nanoparticles are visualized.

Atomic force microscopy↗

RACORO continental boundary layer cloud investigations. Part I: Case study development and ensemble large-scale forcings

Observation-based modeling case studies of continental boundary layer clouds have been developed to study cloudy boundary layers, aerosol influences upon them, and their representation in cloud- and global-scale models. Three 60-hour case study periods span the temporal evolution of cumulus, stratiform, and drizzling boundary layer cloud systems, representing mixed and transitional states rather than idealized or canonical cases. Based on in-situ measurements from the RACORO field campaign and remote-sensing observations, the cases are designed with a modular configuration to simplify use in large-eddy simulations (LES) and single-column models. Aircraft measurements of aerosol number size distribution are fit to lognormal functions for concise representation in models. Values of the aerosol hygroscopicity parameter, κ, are derived from observations to be ~0.10, which are lower than the 0.3 typical over continents and suggestive of a large aerosol organic fraction. Ensemble large-scale forcing datasets are derived from the ARM variational analysis, ECMWF forecasts, and a multi-scale data assimilation system. The forcings are assessed through comparison of measured bulk atmospheric and cloud properties to those computed in 'trial' large-eddy simulations, where more efficient run times are enabled through modest reductions in grid resolution and domain size compared to the full-sized LES grid. Simulations capture many of the general features observed, but the state-of-the-art forcings were limited at representing details of cloud onset, and tight gradients and high-resolution transients of importance. Methods for improving the initial conditions and forcings are discussed. The cases developed are available to the general modeling community for studying continental boundary clouds.

54 ENVIRONMENTAL SCIENCES↗

ForC: a global database of forest carbon stocks and fluxes

Forests play an influential role in the global carbon (C) cycle, storing roughly half of terrestrial C and annually exchanging with the atmosphere more than ten times the carbon dioxide (CO 2 ) emitted by anthropogenic activities. Yet, scaling up from ground-based measurements of forest C stocks and fluxes to understand global scale C cycling and its climate sensitivity remains an important challenge. Tens of thousands of forest C measurements have been made, but these data have yet to be integrated into a single database that makes them accessible for integrated analyses. Here we present an open-access global Forest Carbon database (ForC) containing records of ground-based measurements of ecosystem-level C stocks and annual fluxes, along with disturbance history and methodological information. ForC expands upon the previously published tropical portion of this database, TropForC (DOI: 10.5061/dryad.t516f), now including 17,538 records (previously 3568) representing 2,731 plots (previously 845) in 826 geographically distinct areas (previously 178). The database covers all forested biogeographic and climate zones, represents forest stands of all ages, and includes 89 C cycle variables collected between 1934 and 2015. We expect that ForC will prove useful for macroecological analyses of forest C cycling, for evaluation of model predictions or remote sensing products, for quantifying the contribution of forests to the global C cycle, and for supporting international efforts to inventory forest carbon and greenhouse gas exchange. A dynamic version of ForC-db is maintained at https://github.com/forc-db, and we encourage the research community to collaborate in updating, correcting, expanding, and utilizing this database.

Anderson-Teixeira, Kristina J.↗

A molecular mechanics force field for lignin

A CHARMM molecular mechanics force field for lignin is derived. Parameterization is based on reproducing quantum mechanical data of model compounds. Partial atomic charges are derived using the RESP electrostatic potential fitting method supplemented by the examination of methoxybenzene:water interactions. Dihedral parameters are optimized by fitting to critical rotational potentials and bonded parameters are obtained by optimizing vibrational frequencies and normal modes. Finally, the force field is validated by performing a molecular dynamics simulation of a crystal of a lignin fragment molecule and comparing simulation-derived structural features with experimental results. Together with the existing force field for polysaccharides, this lignin force field will enable full simulations of lignocellulose.

09 BIOMASS FUELS↗

Deficient precipitation sensitivity to Sahel land surface forcings among CMIP5 models

Abstract The overall performance of the simulated seasonal precipitation response to local terrestrial forcings, namely vegetation abundance and soil moisture, in the Sahel among the Coupled Model Intercomparison Project Phase Five (CMIP5) Earth System Models (ESMs) is systematically investigated and compared with its observational counterpart using a multivariate statistical method. The observed seasonal precipitation response is evaluated against a large ensemble of observational, reanalysis, and satellite data sets to provide quantification of uncertainties. The behaviour of models with and without a Dynamic Global Vegetation Model (DGVM) component is also explored, along with the mechanisms responsible for terrestrial feedback on rainfall. In general, the CMIP5 models can reasonably capture the seasonal evolution of Sahel precipitation and soil moisture, albeit with wet biases during the pre‐monsoon period and dry biases during the peak monsoon period. The non‐DGVM ESMs simulate comparable leaf area indices (LAIs) with observations, while DGVM‐enabled ESMs simulate too much year‐round LAI. The variance of precipitation that is attributed to oceanic forcings in CMIP5 is comparable with observations; however, the variance of precipitation that is attributed to terrestrial forcings is smaller in CMIP5 models than observed, especially for non‐DGVM ESMs. CMIP5 models, especially those without DGVMs, undervalue precipitation's observed response strength to soil moisture anomalies. In both observations and CMIP5 models, none of the atmospheric variables show significant responses to direct vegetation forcing, except for the response in transpiration. Although vegetation has minimal direct effect on the atmospheric state, it can affect the atmosphere by modifying soil moisture and transpiration rate indirectly, which helps explain the more realistic simulation of rainfall in DGVM‐enabled ESMs than non‐DGVM ESMs. Coupling of an ESM to a DGVM is critical in generating reasonable land–atmosphere feedback and examining future ecological and climatic changes over the Sahel.

54 ENVIRONMENTAL SCIENCES↗

Modeling the effects of dust-radiative forcing on the movement of Hurricane Helene (2006)

This study is the first to relate Saharan dust and tropical cyclone (TC) movement over the eastern and central Atlantic Ocean (ECAO) using observations and modeling. An eastward position forecast bias for TCs over ECAO has been noticed and is potentially related to the neglect of dust-radiative forcing in numerical models. Using 11-year observations we found that aerosol optical depth and TC westward speed over ECAO are correlated (0.62) with a confidence level of 99%. The Weather Research and Forecasting dust model was used to quantitatively study the impact of the dust-radiative forcing on Helene’s (2006) track forecasts with 3 different microphysics schemes. The dust-radiative forcing increases the temperature in the warm Saharan Air Layer, thus increases the temperature gradient and modifies wind speed and/or direction along the southern flank of the dust plume, improving Helene’s track. Including dust-radiative forcing reduces the error in 7-day position forecasts by 27% (~205km).

58 GEOSCIENCES↗

Sub-Saharan Northern African climate at the end of the twenty-first century: forcing factors and climate change processes

A regional climate model, the Weather Research and Forecasting (WRF) Model, is forced with increased atmospheric CO 2 and anomalous SSTs and lateral boundary conditions derived from nine coupled atmosphere-ocean general circulation models to produce an ensemble set of nine future climate simulations for northern Africa at the end of the twenty-first century. A well validated control simulation, agreement among ensemble members, and a physical understanding of the future climate change enhance confidence in the predictions. The regional model ensembles produce consistent precipitation projections over much of northern tropical Africa. A moisture budget analysis is used to identify the circulation changes that support future precipitation anomalies. The projected midsummer drought over the Guinean Coast region is related partly to weakened monsoon flow. Since the rainfall maximum demonstrates a southward bias in the control simulation in July-August, this may be indicative of future summer drying over the Sahel. Wetter conditions in late summer over the Sahel are associated with enhanced moisture transport by the West African westerly jet, a strengthening of the jet itself, and moisture transport from the Mediterranean. Severe drought in East Africa during August and September is accompanied by a weakened Indian monsoon and Somali jet. Simulations with projected and idealized SST forcing suggest that overall SST warming in part supports this regional model ensemble agreement, although changes in SST gradients are important over West Africa in spring and fall. Simulations which isolate the role of individual climate forcings suggest that the spatial distribution of the rainfall predictions is controlled by the anomalous SST and lateral boundary conditions, while CO2 forcing within the regional model domain plays an important secondary role and generally produces wetter conditions.

54 ENVIRONMENTAL SCIENCES↗

RCP4.5: A Pathway for Stabilization of Radiative Forcing by 2100

Representative Concentration Pathway (RCP) 4.5 is a scenario that stabilizes radiative forcing at 4.5 W m{sup -2} in the year 2100 without ever exceeding that value. Simulated with the Global Change Assessment Model (GCAM), RCP4.5 includes long-term, global emissions of greenhouse gases, short-lived species, and land-use-land-cover in a global economic framework. RCP4.5 was updated from earlier GCAM scenarios to incorporate historical emissions and land cover information common to the RCP process and follows a cost-minimizing pathway to reach the target radiative forcing. The imperative to limit emissions in order to reach this target drives changes in the energy system, including shifts to electricity, to lower emissions energy technologies and to the deployment of carbon capture and geologic storage technology. In addition, the RCP4.5 emissions price also applies to land use emissions; as a result, forest lands expand from their present day extent. The simulated future emissions and land use were downscaled from the regional simulation to a grid to facilitate transfer to climate models. While there are many alternative pathways to achieve a radiative forcing level of 4.5 W m{sup -2}, the application of the RCP4.5 provides a common platform for climate models to explore the climate system response to stabilizing the anthropogenic components of radiative forcing.

54 ENVIRONMENTAL SCIENCES↗

HTS Transformer Windings Design Using Distributive Ratios for Minimization of Short Circuit Forces

High-temperature superconducting (HTS) transformers have a promising feature in reduction of total weight, total size, and the losses of large-scale distribution transformers. However, the lower leakage reactance of HTS transformers results in a higher short-circuit fault currents and electromagnetic forces. Therefore, optimization of short-circuit electromagnetic forces is one of the crucial aspects in the design of HTS transformers. In this paper, a novel analytical method is proposed for determination of optimum distributive ratios resulting in minimization of these forces for asymmetrical multi-segment windings of an HTS transformer. Employing these distributive ratios, radial and axial components of short-circuit electromagnetic forces in an HTS transformer are significantly reduced. Two- and three-dimensional (2D and 3D) finite element method (FEM) simulations are employed to verify the analytical method results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-segment Winding Application for Axial Short Circuit Force Reduction Under Tap Changer Operation in HTS Transformers

High-temperature superconducting (HTS) transformers have remarkable appealing advantages over conventional ones. But higher brittleness of HTS windings with respect to copper windings makes HTS transformers more vulnerable in short circuit and inrush current situations. During tap changer operation, appreciable asymmetry and non-uniform distribution of ampere-turn along the windings causes high axial component of short circuit forces and makes the situation more severe. In this paper, multi-segment winding method is employed for reduction of axial short circuit forces. An analytical method is presented for calculation of axial component of short circuit forces under tap changer operation. Analytical method shows that with utilizing HLHLHLH asymmetrical multi-segment windings, during tap changer operation, the axial component of short circuit forces reduces significantly. The results of the analytical method are compared with the results of finite element method (FEM) model simulations, and the consistency is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Numerical Investigation of the Pinning Phenomenon in Quasi-Periodic Frenkel Kontrova Model Under an External Force

We perform a numerical study on Frenkel–Kontrova (FK) models in quasi-periodic media subject to a constant external force. The quasi-periodic FK models appear in several physical problems such as deposition, spin waves in 1-D, planar dislocations in 3-D either in a quasi-crystal or on a cleaved surface with irrational slopes of a periodic crystal. The phenomenon that we study is pinning. When there is no force, the very homogeneous equilibria are abundant, but when there is a constant force, the uniformly distributed equilibrium states just slide away and the physically relevant equilibria are configurations with frequencies (inverse of densities in some interpretation) that are resonant with the frequencies of the medium. We use a dynamical interpretation of the equilibrium equation and perform a systematic Monte-Carlo exploration of the equilibria. We study the geometry and quantitative properties of the equilibria after the application of a constant external force. This leads to several quantitative regularities on the abundance and geometric properties of the pinned states in the models we consider. This complements recent qualitative studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical Investigation of Hydrogen Adsorption and Dissociation on Iron and Iron Carbide Surfaces Using the ReaxFF Reactive Force Field Method

We have developed a ReaxFF reactive force field to describe hydrogen adsorption and dissociation on iron and iron carbide surfaces relevant for simulation of Fischer–Tropsch (FT) synthesis on iron catalysts. This force field enables large system (>>1000 atoms) simulations of hydrogen related reactions with iron. The ReaxFF force field parameters are trained against a substantial amount of structural and energetic data including the equations of state and heats of formation of iron and iron carbide related materials, as well as hydrogen interaction with iron surfaces and different phases of bulk iron. We have validated the accuracy and applicability of ReaxFF force field by carrying out molecular dynamics simulations of hydrogen adsorption, dissociation and recombination on iron and iron carbide surfaces. The barriers and reaction energies for molecular dissociation on these two types of surfaces have been compared and the effect of subsurface carbon on hydrogen interaction with iron surface is evaluated. We found that existence of carbon atoms at subsurface iron sites tends to increase the hydrogen dissociation energy barrier on the surface, and also makes the corresponding hydrogen dissociative state relatively more stable compared to that on bare iron. These properties of iron carbide will affect the dissociation rate of H{sub 2} and will retain more surface hydride species, thus influencing the dynamics of the FT synthesis process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Forced Cooling Friction Stir Welding of 2060-T8 Al-Li Alloy

Friction stir welding of 2060-T8 Al-Li alloy was experimentally investigated. Forced cooling process was realized by placing two copper pressure plates with a waterway on both sides of weld top surface. The relations between joint formation, microstructures and mechanical properties were mainly discussed. Compared with conventional joint by natural cooling, the welding joint with smaller flashes by forced cooling has the smaller well-distributed grains and higher microhardness in the stir zone (SZ). The tensile strength and elongation of forced cooling joint, respectively, reach 445.7 MPa and 6.7%, which are obviously higher than those of the conventional joint. The fracture locations of the conventional and forced cooling joints are located in the SZ, and the fracture surface morphologies show a typical ductile fracture mode.

36 MATERIALS SCIENCE↗

Axial and transverse acoustic radiation forces on a fluid sphere placed arbitrarily in Bessel beam standing wave tweezers

The axial and transverse radiation forces on a fluid sphere placed arbitrarily in the acoustical field of Bessel beams of standing waves are evaluated. The three-dimensional components of the time-averaged force are expressed in terms of the beam-shape coefficients of the incident field and the scattering coefficients of the fluid sphere using a partial-wave expansion (PWE) method. Examples are chosen for which the standing wave field is composed of either a zero-order (non-vortex) Bessel beam, or a first-order Bessel vortex beam. It is shown here, that both transverse and axial forces can push or pull the fluid sphere to an equilibrium position depending on the chosen size parameter ka (where k is the wave-number and a the sphere’s radius). The corresponding results are of particular importance in biophysical applications for the design of lab-on-chip devices operating with Bessel beams standing wave tweezers. Moreover, potential investigations in acoustic levitation and related applications in particle rotation in a vortex beam may benefit from the results of this study. -- Highlights: •The axial and transverse forces on a fluid sphere in acoustical Bessel beams tweezers are evaluated. •The attraction or repulsion to an equilibrium position in the standing wave field is examined. •Potential applications are in particle manipulation using standing waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The role of the “Casimir force analogue” at the microscopic processes of crystallization and melting

Melting (crystallization), a phase transition from a crystalline solid to a liquid state, is a common phenomenon in nature. We suggest a new factor, “the Casimir force analogue”, to describe mechanisms of melting and crystallization. The Casimir force analogue is a force occurring between the surfaces of solid and liquid phases of metals caused by different energy density of phonons of these phases. It explains abrupt changes in geometry and thermodynamic parameters at a melting point. “The Casimir force analogue” helps to estimate latent melting heat and to gain an insight into a solid–liquid transition problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Force field for calcium sulfate minerals to predict structural, hydration, and interfacial properties

Calcium sulfates such as anhydrite, hemihydrate, and gypsum find widespread use in building materials, implants, and tissue healing. We introduce a simple and compatible atomistic force field for all calcium sulfate phases that reproduces a wide range of experimental data including lattice parameters, surface, hydration, mechanical, and thermal properties in 1% to 5% accuracy relative to experiments. The performance is several times better than prior force fields and DFT methods, which lead to errors in structures and energies up to 100%. We explain (hkl) cleavage energies, the dynamics of (hkl) water interfaces, and new insights into molecular origins of crystal-facet specific hydration and solubility. Impressive agreement of computed and experimentally measured hydration energies is shown. The models add to the Interface force field (IFF) and are compatible with multiple force fields (CHARMM, AMBER, GROMOS, CVFF, PCFF, OPLS-AA) for property predictions of sulfate-containing materials from atoms to the large nanometer scale.

36 MATERIALS SCIENCE↗

Molecular level study of uni/multi-axial deformation response of tobermorite 11 Å: A force field comparison study

Molecular deformation response of tobermorite 11 Å (a mineral analogue to C-S-H, the primary constituent of hydrated cement paste) under uni/tri-axial loading (both tension and compression) has been investigated in this manuscript using empirical and reactive force fields. A comparison has been chalked out amongst the responses using different force fields. Evolution of atomic environment during the deformation have studied using reactive force field. This study demonstrate the key observations on the application of different force fields to study the large deformation behaviour of the material.

36 MATERIALS SCIENCE↗