Search NASA⌕ Search

SEARCH · Search NASA

Results for “Impact testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Lunar Impact Melt Crystallization Produces Reflectance Spectra Dominated By Clinopyroxene Signatures: Implications for the Origin of Pink Spinel Anorthosite

Magma-wallrock interaction and impact melt crystallization are the two leading hypotheses for the formation of orbitally detected lunar “pink” spinel anorthosite (PSA) [1-3]. Distinguishing among hypotheses is complicated because both require mixing of anorthositic crust and MgO-rich ultramafic components. Models for PSA formation need to account for either the thermodynamic hurdles of crustal assimilation, or the size of impactor and composition of target material needed to generate spinel during crater and basin formation. Determining whether the energy source is endogenic or exogenic is important for understanding the thermal and chemical evolution of the lunar crust. Here we test the impact melt hypothesis by performing controlled cooling experiments on two hypothetical impact melt compositions. The compositions represent mixing of ultramafic magma and anorthositic crust in molar ratios of approximately 50:50 and 25:75. Synthetic crystallized assemblages were prepared for chemical analysis and bidirectional reflectance spectroscopy in the visible to near-infrared wavelengths. All crystallization experiments contained plagioclase, olivine, and clinopyroxene, but trace amounts of spinel were only observed in the 50:50 mix. The experimental spinel is similar to the compositions inferred from remote observations. However, the high-Ca pyroxene in our experimental assemblages (9 – 18 wt.%) resulted in 1 and 2 µm absorption band center positions consistent with synthetic clinopyroxene. The clinopyroxene absorptions are present regardless of specific mineral modes and the presence of either olivine or spinel. These results suggest that impact melt crystallization will produce clinopyroxene-bearing lithologies, the presence of which masks spectral contributions from coexisting spinel and olivine. Assuming that the trace amounts of spinel observed in our experiments could be concentrated and isolated from the mafic silicates by convection or density settling in the impact melt sheet, the spinel-rich areas would still be proximally associated with the remaining silicate-dominated assemblage exhibiting strong clinopyroxene spectral signatures. We conclude that impact melting of the lunar crust can explain rare cases of PSA in association with clinopyroxene. Previous investigations of magma-wallrock interactions [2] demonstrate that small plagioclase-contaminated regions of an ultramafic intrusion can concentrate spinel whereas larger portions of the same intrusion remain relatively uncontaminated and yield olivine and orthopyroxene, consistent with the more common occurrence of PSAs in association with orthopyroxene ±olivine in the remote sensing database (e.g., Moscoviense Basin) [4].

petrology↗

Estimating Arctic Ocean Acoustic Travel Times Using an Earth System Model

Abstract The hydroacoustic environment of a rapidly warming Arctic Ocean will be impacted by interconnected changes in the physical environment and increased human activity. Previous acoustic calculations will need to be updated to reflect current and future conditions. Earth System Models are important tools for making projections of changes in a wide range of physical processes under future climates. We present a comparison of Arctic acoustic travel times based on output from the Department of Energy's Energy Exascale Earth System Model with measured travel times from the 2016–2017 Canada Basin Acoustic Propagation Experiment and with travel times predicted by empirical temperature and salinity observations. This comparison allows us to test the impact of changes in Arctic sound speed profiles on acoustic travel times and connects Arctic hydroacoustics with the changing Arctic environment as described by a climate model.

54 ENVIRONMENTAL SCIENCES↗

Development of Multilayer Sinter Cladding of Cold Work Tool Steel on Hadfield Steel Plates for Wear-Resistant Applications

Machinery components used for mining and mineral processing activities are often subjected to high impact loads and wear which have placed demands for the development of materials with high resistance to dynamic loads and aggressive wear conditions. In this study, a multilayered cladding of high alloyed cold work tool steel (X245VCrMo9-4), interlayered with Hadfield steel (X120Mn12) plates, which was also used as substrate using super-solidus liquid-phase sintering technique was investigated. A stack of the cold work tool steel powder was prepared with interlayered X120Mn12 steel plates in an alumina crucible at tap density with the substrate placed on it and was sintered in a vacuum furnace at 1250 °C at a heating rate of 10 K/min, held for 30 min under a nitrogen atmosphere at 0.08 MPa and furnace-cooled. Sample from the as-sintered cladding was subjected to austenization at 1000 °C, quenched in oil and tempered at 150 °C for 2 h. Samples were subjected to microstructural examination using optical and scanning electron microscopy. The microstructural investigations were supplemented by hardness and impact wear tests. Computational thermodynamics was used to support experimental findings. The results revealed that a near-net densification of the sintered X245 was achieved with 99.93 ± 0.01% density. The sintered X245 was characterized by a dispersion of vanadium carbonitride precipitates, especially at the grain boundaries. The heat-treated X245 sample had the highest hardness of 680 ± 7 HV30 due to the matrix of tempered martensitic microstructure when compared to as-sintered with hardness of 554 ± 2 HV30. The X245/X120 interface was characterized by diffusion of Cr, Mo, Mn and C, which resulted in metallurgical bonding between the cladded materials. The impact wear resistance of the sintered X245 was eight times that of the X120; hence, a tough and wear-resistant tool is anticipated when the X120 work hardened in service.

36 MATERIALS SCIENCE↗

A Summary of DOD-Sponsored Research Performed at NASA Langley's Impact Dynamics Research Facility

The Impact Dynamics Research Facility (IDRF) is a 240-ft.-high gantry structure located at NASA Langley Research Center in Hampton, Virginia. The IDRF was originally built in the early 1960's for use as a Lunar Landing Research Facility. As such, the facility was configured to simulate the reduced gravitational environment of the Moon, allowing the Apollo astronauts to practice lunar landings under realistic conditions. In 1985, the IDRF was designated a National Historic Landmark based on its significant contributions to the Apollo Moon Landing Program. In the early 1970's the facility was converted into its current configuration as a full-scale crash test facility for light aircraft and rotorcraft. Since that time, the IDRF has been used to perform a wide variety of impact tests on full-scale aircraft, airframe components, and space vehicles in support of the General Aviation (GA) aircraft industry, the U.S. Department of Defense (DOD), the rotorcraft industry, and the NASA Space program. The objectives of this paper are twofold: to describe the IDRF facility and its unique capabilities for conducting structural impact testing, and to summarize the impact tests performed at the IDRF in support of the DOD. These tests cover a time period of roughly 2 1/2 decades, beginning in 1975 with the full-scale crash test of a CH-47 Chinook helicopter, and ending in 1999 with the external fuel system qualification test of a UH-60 Black Hawk helicopter. NASA officially closed the IDRF in September 2003; consequently, it is important to document the past contributions made in improved human survivability and impact tolerance through DOD-sponsored research performed at the IDRF.

Jackson, Karen E.↗

A Summary of DOD-Sponsored Research Performed at NASA Langley's Impact Dynamics Research Facility

The Impact Dynamics Research Facility (IDRF) is a 240-ft.-high gantry structure located at NASA Langley Research Center in Hampton, Virginia. The IDRF was originally built in the early 1960's for use as a Lunar Landing Research Facility. As such, the facility was configured to simulate the reduced gravitational environment of the Moon, allowing the Apollo astronauts to practice lunar landings under realistic conditions. In 1985, the IDRF was designated a National Historic Landmark based on its significant contributions to the Apollo Moon Landing Program. In the early 1970's the facility was converted into its current configuration as a full-scale crash test facility for light aircraft and rotorcraft. Since that time, the IDRF has been used to perform a wide variety of impact tests on full-scale aircraft, airframe components, and space vehicles in support of the General Aviation (GA) aircraft industry, the U.S. Department of Defense (DOD), the rotorcraft industry, and the NASA Space program. The objectives of this paper are twofold: to describe the IDRF facility and its unique capabilities for conducting structural impact testing, and to summarize the impact tests performed at the IDRF in support of the DOD. These tests cover a time period of roughly 2 1/2 decades, beginning in 1975 with the full-scale crash test of a CH-47 Chinook helicopter, and ending in 1999 with the external fuel system qualification test of a UH-60 Black Hawk helicopter. NASA officially closed the IDRF in September 2003; consequently, it is important to document the past contributions made in improved human survivability and impact tolerance through DOD-sponsored research performed at the IDRF.

Jackson, Karen E.↗

Improving Ocean Reanalyses and ENSO Forecasts By Assimilation of Rain Corrected Satellite Sea Surface Salinity Using the GMAO S2S Forecast System

During the past years, we have seen that the La Nina to El Nino transition has had a significant global socio-economic impact and so has been the key focus for improving coupled ocean-atmosphere forecasts. Assimilation of satellite altimetry and subsurface temperature and salinity from (mostly) Argo help to improve the initialization of the thermocline, while satellite Sea Surface Temperature (SST) aids in constraining surface heat-fluxes, leading to improved subseasonal to seasonal forecasts of the coupled system. However, few studies have focused on improving the fresh-water flux and near-surface density and mixing through assimilation of satellite sea surface salinity (SSS). For expediency, the few ocean models that do assimilate SSS bias-correct the satellite SSS data to normalize towards the near-surface Argo data. However, in rainy regions, where buoyant water sits as a fresh lens at the surface, this assumption is likely inadequate. In previous work, we have shown that adjusting SSS data to bulk salinity (Sb) using the Rain Impact Model (RIM) of Santos-Garcia et al., 2014 has improved the near-surface density and mixed layer depth, leading to deeper thermocline and improved the NINO3.4 SST forecasts. Now we utilize the Soil Moisture/Ocean Salinity, Rain Corrected (SMOS_RC) SSS product provided by the Centre Aval de Traitement des données SMOS (CATDS CPDC) to represent the Sb more accurately at first model layer (in our case 5 m). Rather than using a diffusivity model as with RIM, SMOS_RC relies on an observed relationship between the spatial heterogeneity of SMOS SSS and instantaneous rain rate (RR) (Supply et al., 2020). In order to test the impact of SMOS_RC versus SMOS, we compare two reanalyses over the period 2014 to 2021. For both reanalysis experiments, all available along-track absolute dynamic topography and in situ observations are assimilated using the LETKF scheme (Penny et al., 2013). One reanalysis additionally assimilates SMOS SSS data as is (i.e., with the fresh bias), and a separate reanalysis is performed assimilating the SMOS_RC data. We assess the impact for near-surface and subsurface dynamics within ocean reanalyses by validating against observations and explore how SSS assimilation (SMOS versus SMOS_RC) impacts dynamical ENSO forecasts using the NASA GMAO Sub-seasonal to Seasonal coupled forecast system (GEOS S2S-3, Molod et al., 2020, Hackert et al., 2023). We will show that improved SSS estimates and near-surface density and mixing led to more accurate coupled air/sea interaction and better ENSO forecasts.

Eric Hackert↗

The Effects of Off-Axis Loading on the Compression After Impact Strength of Quasi-Isotropic Face Sheet Honeycomb Core Sandwich Structure

This study presents experimental results of compression after impact (CAI) testing of aluminum honeycomb core sandwich structure with face sheets made of co-cured T1100/3960 quasi-isotropic carbon/epoxy when tested at +22.5⁰ and -22.5⁰ with respect to the 0⁰ fibers. In a previous study examining the CAI strengths of honeycomb sandwich structure, it was found that specimens had different CAI strengths, based on a [-45/90/+45/0]s layup, depending on whether they were tested in the 0⁰ direction (face sheet layup of [-45/90/+45/0]s) or 90⁰ direction (face sheet layup of [+45/0/-45/90]s). The CAI strength results showed that the specimens tested in the 90⁰ direction had a 19% drop in CAI strength compared to specimens tested in the 0⁰ direction. This was attributed to the 0⁰ load bearing plies in the 0⁰ direction specimens being “tucked in” at the center of the specimen thus providing more stability against microbuckling. This raised the question as to what CAI strength would specimens tested at +22.5⁰ (face sheet layup of [-22.5/- 67.5/+67.6/+22.5]s) and -22.5⁰ (face sheet layup of [-67.5/+67.5/+22.5/-22.5]s) have compared to specimens tested in the 0⁰ and 90⁰ direction. Results presented in this study show that the specimens loaded at +22.5⁰ and -22.5⁰ have a similar average CAI strength compared to the specimens loaded in the 0⁰ direction. The specimens loaded in the 90⁰ direction exhibit 16% lower average CAI strength. Additional specimens were tested in the +45⁰ direction to put the 0⁰ load bearing fibers on the outside of the specimen to see if this would decrease the strength as has been documented for undamaged strength. These specimens have average CAI strength values between the 0⁰ direction average CAI strength values and the 90⁰ direction average CAI strength values.

Sandwich structure↗

Study of impacts of two types of cellular aging on the yeast bud morphogenesis

Understanding the mechanisms of the cellular aging processes is crucial for attempting to extend organismal lifespan and for studying age-related degenerative diseases. Yeast cells divide through budding, providing a classical biological model for studying cellular aging. With their powerful genetics, relatively short cell cycle, and well-established signaling pathways also found in animals, yeast cells offer valuable insights into the aging process. Recent experiments suggested the existence of two aging modes in yeast characterized by nucleolar and mitochondrial declines, respectively. By analyzing experimental data, this study shows that cells evolving into those two aging modes behave differently when they are young. While buds grow linearly in both modes, cells that consistently generate spherical buds throughout their lifespan demonstrate greater efficacy in controlling bud size and growth rate at young ages. A three-dimensional multiscale chemical-mechanical model was developed and used to suggest and test hypothesized impacts of aging on bud morphogenesis. Experimentally calibrated model simulations showed that during the early stage of budding, tubular bud shape in one aging mode could be generated by locally inserting new materials at the bud tip, a process guided by the polarized Cdc42 signal. Furthermore, the aspect ratio of the tubular bud could be stabilized during the late stage as observed in experiments in this work. The model simulation results suggest that the localization of new cell surface material insertion, regulated by chemical signal polarization, could be weakened due to cellular aging in yeast and other cell types, leading to the change and stabilization of the bud aspect ratio.

Tsai, Kevin↗

Experimental Testing and Numerical Modeling of Ballistic Impact on S-2 Glass/SC 15 Composites

Here, the work presented in this paper details both an experimental program and an associated numerical modeling effort to characterize and predict the ballistic response of S-2 glass/SC15 epoxy composite panels. The experimental program consisted of ¼ inch diameter soft carbon steel spheres impacting ¼ and ½ inch thick flat composite panels at velocities ranging from 220 to 1570 m/s. High speed cameras were used to capture the impact event and resulting residual velocity of the spheres for each test configuration. After testing, each panel was inspected both visually and with ultrasonic C-scan techniques to determine the extent and depth of damage imparted on the panel by the impactor. The numerical modeling efforts utilized the anisotropic multi-constituent composite model (MCM) within the CTH shock physics hydrocode. The MCM model allows for evaluation of damage at the constituent level through continuum averaged stress and strain fields. The model also accounts for the inherent coupling of the equation of state and strength response that occurs in anisotropic composite materials. Finally, the simulation results are compared against the experimentally measured residual velocity as a quantitative metric and against the measured damage extent and patterns as a qualitative metric. The comparisons show good agreement in residual velocity and damage extent.

36 MATERIALS SCIENCE↗

Hydrodynamic impact of a system with a single elastic mode I : theory and generalized solution with an application to an elastic airframe

Solutions of impact of a rigid prismatic float connected by a massless spring to a rigid upper mass are presented. The solutions are based on hydrodynamic theory which has been experimentally confirmed for a rigid structure. Equations are given for defining the spring constant and the ratio of the sprung mass to the lower mass so that the two-mass system provides representation of the fundamental mode of an airplane wing. The forces calculated are more accurate than the forces which would be predicted for a rigid airframe since the effect of the fundamental mode on the hydrodynamic force is taken into account. In a comparison of the theoretical data with data for a severe flight-test landing impact, the effect of the fundamental mode on the hydrodynamic force is considered and response data are compared with experimental data.

Mayo, Wilbur L↗

Constraints for stellar electron-capture rates on 86 Kr via the 86 Kr(t, 3 He +γ) 86 Br reaction and the implications for core-collapse supernovae

Background: In the late stages of stellar core collapse just prior to core bounce, electron captures on medium-heavy nuclei drive deleptonization. Therefore, simulations require the use of accurate reaction rates. Nuclei with neutron number near N=50 above atomic number Z=28 play an important role. Rates presently used in astrophysical simulations rely primarily on a relatively simple single-state approximation. In order to improve the accuracy of the astrophysical simulations, experimental data are needed to test the electron-capture rates and to guide the development of better theoretical models and astrophysical simulations. Purpose: The purpose of the present work was to measure the Gamow-Teller transition strength from 86 Kr to 86 Br, to derive the stellar electron-capture rates based on the extracted strengths, and to compare the derived rates with rates based on shell-model and quasiparticle random-phase approximation (QRPA) Gamow-Teller strengths calculations, as well as the single-state approximation. An additional purpose was to test the impact of using improved electron-capture rates on the late evolution of core-collapse supernovae. Method: The Gamow-Teller strengths from 86 Kr were extracted from the 86 Kr(t, 3 He +γ) charge-exchange reaction at 115MeV/u. The electron-capture rates were calculated as a function of stellar density and temperature. Besides the case of 86 Kr, the electron-capture rates based on the QRPA calculations were calculated for 78 additional isotopes near N=50 above Z=28. The impact of using these rates instead of those based on the single-state approximation is studied in a spherically symmetrical simulation of core collapse just prior to bounce. Results: The derived electron-capture rates on 86 Kr from the experimental Gamow-Teller strength distribution are much smaller than the rates estimated based on the single-state approximation. Rates based on Gamow-Teller strengths estimated in shell-model and QRPA calculations are more accurate. The core-collapse supernova simulation with electron-capture rates based on the QRPA calculations indicate a significant reduction in the deleptonization during the collapse phase. Conclusions: It is important to utilize microscopic theoretical models that are tested by experimental data to constrain and estimate Gamow-Teller strengths and derived electron-capture rates for nuclei near N=50 that are inputs for astrophysical simulations of core-collapse supernovae and their multimessenger signals, such as the emission of neutrinos and gravitational waves.

79 ASTRONOMY AND ASTROPHYSICS↗

Refurbishment and Automation of the Thermal/Vacuum Facilities at the Goddard Space Flight Center

The thermal/vacuum facilities located at the Goddard Space Flight Center (GSFC) have supported both manned and unmanned space flight since the 1960s. Of the 11 facilities, currently 10 of the systems are scheduled for refurbishment and/or replacement as part of a 5-year implementation. Expected return on investment includes the reduction in test schedules, improvements in the safety of facility operations, reduction in the complexity of a test and the reduction in personnel support required for a test. Additionally, GSFC will become a global resource renowned for expertise in thermal engineering, mechanical engineering and for the automation of thermal/vacuum facilities and thermal/vacuum tests. Automation of the thermal/vacuum facilities includes the utilization of Programmable Logic Controllers (PLCs) and the use of Supervisory Control and Data Acquisition (SCADA) systems. These components allow the computer control and automation of mechanical components such as valves and pumps. In some cases, the chamber and chamber shroud require complete replacement while others require only mechanical component retrofit or replacement. The project of refurbishment and automation began in 1996 and has resulted in the computer control of one Facility (Facility #225) and the integration of electronically controlled devices and PLCs within several other facilities. Facility 225 has been successfully controlled by PLC and SCADA for over one year. Insignificant anomalies have occurred and were resolved with minimal impact to testing and operations. The amount of work remaining to be performed will occur over the next four to five years. Fiscal year 1998 includes the complete refurbishment of one facility, computer control of the thermal systems in two facilities, implementation of SCADA and PLC systems to support multiple facilities and the implementation of a Database server to allow efficient test management and data analysis.

Donohue, John T.↗

Technical Assistance to Developers

This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

08 HYDROGEN↗

CID-720 aircraft high-environment flight instrumentation system

The high-environment flight instrumentation system was designed to acquire Langley's structural response data during the full scale transport-controlled impact demonstration test. There was only one opportunity for data acquisition. Thus, a high reliability and crashworthy design approach was implemented. The approach featured multi-level redundancy and a vigorous quality assurance testing program. Complying with an accelerated schedule, the instrumentation system was developed, tested and shipped within 18 months to Dryden Flight Research Facility. The flight instrumentation system consists of two autonomous data systems, DAS #1 and #2, and an excellent checkout subsystem. Each data system is partitioned into four pallets. The system was designed to operate on manned and unmanned flights. There are 176 data channels per data system. These channels are sequentially sampled and encoded into 1 megabit/sec pulse code modulation (PCM) data signal. To increase the probability of success, a special PCM distribution subsystem was developed. This subsystem distributes the PCM signal to two transmitters, one delay memory, and eight recorder tracks. The data on four of these trackes was digitally delayed approximately 300 msec to maximize data acquisition during impact. Therefore each data system's data is redundantly recorded onboard and on the ground. There are two time code generators. Parallel time from each is encoded into both data systems. Serial time from each is redundantly recorded on both onboard recorders. Instrumentation power is independent of aircraft power and self-contained.

Calloway, R. S.↗

Surface impacts and associated mechanisms of a moisture intrusion into the Arctic observed in mid-April 2020 during MOSAiC

Distinct events of warm and moist air intrusions (WAIs) from mid-latitudes have pronounced impacts on the Arctic climate system. We present a detailed analysis of a record-breaking WAI observed during the MOSAiC expedition in mid-April 2020. By combining Eulerian with Lagrangian frameworks and using simulations across different scales, we investigate aspects of air mass transformations via cloud processes and quantify related surface impacts. The WAI is characterized by two distinct pathways, Siberian and Atlantic. A moist static energy transport across the Arctic Circle above the climatological 90th percentile is found. Observations at research vessel Polarstern show a transition from radiatively clear to cloudy state with significant precipitation and a positive surface energy balance (SEB), i.e., surface warming. WAI air parcels reach Polarstern first near the tropopause, and only 1–2 days later at lower altitudes. In the 5 days prior to the event, latent heat release during cloud formation triggers maximum diabatic heating rates in excess of 20 K d -1 . For some poleward drifting air parcels, this facilitates strong ascent by up to 9 km. Based on model experiments, we explore the role of two key cloud-determining factors. First, we test the role moisture availability by reducing lateral moisture inflow during the WAI by 30%. This does not significantly affect the liquid water path, and therefore the SEB, in the central Arctic. The cause are counteracting mechanisms of cloud formation and precipitation along the trajectory. Second, we test the impact of increasing Cloud Condensation Nuclei concentrations from 10 to 1,000 cm -3 (pristine Arctic to highly polluted), which enhances cloud water content. Resulting stronger longwave cooling at cloud top makes entrainment more efficient and deepens the atmospheric boundary layer. Finally, we show the strongly positive effect of the WAI on the SEB. This is mainly driven by turbulent heat fluxes over the ocean, but radiation over sea ice. The WAI also contributes a large fraction to precipitation in the Arctic, reaching 30% of total precipitation in a 9-day period at the MOSAiC site. However, measured precipitation varies substantially between different platforms. Therefore, estimates of total precipitation are subject to considerable observational uncertainty.

54 ENVIRONMENTAL SCIENCES↗

Empirical models for spacecraft damage from orbital debris penetration and effects on spacecraft survivability

Semi-empirical models of hole diameter and tip-to-tip crack length for different multi-wall shielding systems currently under development for the International Space Station are presented. These equations were developed using light gas gun test data at impact velocities of 6.5 km/s and inhibited shaped charge test data for an impact velocity of 11.3 km/s. These models are incorporated into a survivability analysis using the manned spacecraft crew survivability computer code to determine whether or not module unzipping or crew incapacitation would occur under a specific set of impact conditions.

Williamsen, Joel↗

Endurance and Other Properties at Low Temperatures of Some Alloys for Aircraft Use

The low temperature endurance properties of materials for aircraft construction are not well known. In order to determine them, apparatus for testing endurance at -40 C has been devised. The endurance properties of monel metal, low-carbon stainless steel, "18 and *, " 3 1/2% Ni steel and chromium-molybdenum steel have been determined at -40 C and at room temperature about +20 C. Tensile, impact and hardness tests of these materials have also been made at various temperatures. The results show an increase in endurance limit, tensile strength, and hardness with decreased temperature. Impact strength is, in general, decreased, but of all the alloys tested, only one, low-carbon stainless steel, gives less than 15 ft. lb. Chrpay impact test at -40 C.

Russell, H W↗

Toward zero waste: Composting and recycling for sustainable venue based events

Highlights: • Venues have billions of customers per year contributing to waste generation. • Waste audits of four university baseball games were conducted to assess venue waste. • Seven scenarios including composting were modeled using EPA’s WARM. • Findings demonstrate tradeoffs between emissions, energy, and landfill avoidance. • Sustainability of handling depends on efficacy of collection and treatment impacts. - Abstract: This study evaluated seven different waste management strategies for venue-based events and characterized the impacts of event waste management via waste audits and the Waste Reduction Model (WARM). The seven waste management scenarios included traditional waste handling methods (e.g. recycle and landfill) and management of the waste stream via composting, including purchasing where only compostable food service items were used during the events. Waste audits were conducted at four Arizona State University (ASU) baseball games, including a three game series. The findings demonstrate a tradeoff among CO{sub 2} equivalent emissions, energy use, and landfill diversion rates. Of the seven waste management scenarios assessed, the recycling scenarios provide the greatest reductions in CO{sub 2} eq. emissions and energy use because of the retention of high value materials but are compounded by the difficulty in managing a two or three bin collection system. The compost only scenario achieves complete landfill diversion but does not perform as well with respect to CO{sub 2} eq. emissions or energy. The three game series was used to test the impact of staffed bins on contamination rates; the first game served as a baseline, the second game employed staffed bins, and the third game had non staffed bins to determine the effect of staffing on contamination rates. Contamination rates in both the recycling and compost bins were tracked throughout the series. Contamination rates were reduced from 34% in the first game to 11% on the second night (with the staffed bins) and 23% contamination rates at the third game.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗