Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETRON SPUTTERING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Magnetic properties of Fe-rich Fe-V alloy films

Polycrystalline Fe{sub 100-x}V{sub x} with x=0 to 14 at.% V films on a glass substrate were made by the dc magnetron sputtering method. The deposition temperature was 250 deg. C. The magnetic properties, i.e., saturation magnetization 4piM{sub s}, bulk-pinning field for a domain wall H{sub cw}, coercive force H{sub c}, initial permeability mu{sub i}, maximum permeability mu{sub m}, saturation magnetostriction lambda{sub s}, and electrical property, such as the electrical resistivity rho of the Fe-V films, were measured. We find that 4piM{sub s} is a decreasing function of x, H{sub c}, and/or H{sub cw} has a minimum at xapprox =x{sub 0}=8 at. % V, mu{sub i}, mu{sub m}, and/or mu{sub c} has a maximum at x=x{sub 0}, lambda{sub s}approx =0 at x=x{sub 0}, and rho is an increasing function of x. These new magnetic results are consistent with earlier magnetostriction measurements [Jen and Chen, J. Magn. Magn. Mater. 204, 165 (1999)] and theoretical calculations [Ostanin, Staunton, and Razee, Phys. Rev. B 69, 064425 (2004)]. Moreover, all the magnetic features in the x dependence of H{sub c}, H{sub cw}, mu{sub i}, mu{sub m}, mu{sub c}, and lambda{sub s}, respectively, can be explained within the framework of the bulk-pinning (or surface-pinning) and the end-pinning (or nucleation) models. Briefly, the pinning model analysis of the magnetic hysteresis data confirms the inference that near zero lambda{sub s} implies maximal permeabilities and smallest H{sub c} and H{sub cw}. Among all the Fe-V films, the Fe{sub 92}V{sub 8} film has the optimal magnetic and electrical properties for application.

36 MATERIALS SCIENCE↗

Specular electron scattering at single-crystal Cu(001) surfaces

Epitaxial copper layers, 20 nm to 1.5-{mu}m-thick, were grown on MgO(001) by ultrahigh vacuum magnetron sputter deposition at 80 deg. C. In situ electrical resistivity measurements indicate partial specular scattering at the Cu vacuum interface with a Fuchs-Sondheimer scattering parameter p=0.6{+-}0.1. In situ deposition of 0.3 to 7.0-nm-thick Ta cap layers on the Cu surfaces leads to a resistivity increase, which is independent of the Ta thickness and is associated with a transition to completely diffuse surface scattering with p=0.0{+-}0.1. The diffuse scattering is attributed to a 'rough' electron potential at the Cu-Ta interface as well as to scattering into localized interface and surface states.

36 MATERIALS SCIENCE↗

Magnetic softness and high-frequency characteristics of Fe{sub 65}Co{sub 35}-O alloy films

The effects of oxygen concentration and film thickness were studied on the microstructural, electrical, and magnetic properties of Fe{sub 65}Co{sub 35}-O alloy films prepared by dc magnetron sputtering at room temperature. The films showed the best magnetic softness with a large saturation magnetization of 21.5 kG, low coercivities of 2.8 and 2.1 Oe in easy and hard axes, respectively, and a high resistivity of 2215 muOMEGA cm at an optimized condition of an oxygen gas flow ratio of 1.0% and a film thickness of 105 nm. Such an excellent magnetic softness can be attributed to grain refinement caused by the addition of very low dose of oxygen, which basically did not lead to the full formation of Fe and/or Co oxide phases with low saturation magnetizations. The microwave permeability measurement indicated that the addition of very low dose of oxygen could improve the response of real permeability to frequency. A high real permeability of 525 at frequency up to 1.2 GHz was obtained for the Fe{sub 65}Co{sub 35}-O films deposited at the optimized condition above.

36 MATERIALS SCIENCE↗

Temperature dependence of the optical properties of AlInN

Measurements of the temperature dependence of transmission have been carried out on AlInN thin films grown by reactive radio-frequency magnetron sputtering on (0001) sapphire substrates. By following a detailed procedure developed for analyzing the transmission spectra, we obtained more reliable data for the effects of temperature on the optical properties of AlInN. Two sets of temperature and photon-energy dependence of empirical formulas have been established for the absorption coefficient, bandgap, Urbach bandtail, and refractive index, which not only unify various experimental data reported in the literature but also provide a database of the optical properties of AlInN based on experimental results. It was found that the shift in the temperature dependence of the bandgap increases with the Al content and that the Urbach bandtail parameter is closely related to the structural characteristics of the AlInN thin films. These optical properties provide an experimental basis for further theoretical investigation and the design of AlInN-based devices.

36 MATERIALS SCIENCE↗

Charging effect and capacitance modulation of Ni-rich NiO thin film

In this letter, Ni-rich NiO thin film is deposited on p-type Si substrate by dc magnetron sputtering to form a metal-insulator-semiconductor structure. The charge trapping in the Ni nanocrystals (nc-Ni) embedded in NiO matrix induces a flatband voltage shift and capacitance modulation, which could be used for memory applications. The charging of nc-Ni depends on the voltage polarity, as well as the charging time and magnitude of gate voltage. The capacitance modulation can be described by an equivalent circuit model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancement in ordering of Fe{sub 50}Pt{sub 50} film caused by Cr and Cu additives

A 100-nm-thick Fe{sub 50}Pt{sub 50} film with high coercivity was fabricated by magnetron sputtering. On introducing a Cr top/bottom layer, the ordering temperature (T{sub or}) of the film decreased considerably from 500 to 380 deg. C. On introducing both Cr top/bottom layer and a 0.2-nm-thick Cu interlayer, the T{sub or} decreased even further to 340 deg. C. During the annealing process, the number of Cr atoms diffused into the Fe{sub 50}Pt{sub 50} layer increased. This increased the Fe diffusivity, lowering the T{sub or} in the process. The diffusion of the additive and the effects of annealing were verified by selected-area electron diffraction observations and by investigating the temperature dependence of the magnetization. The superlattice structure of the ordered Fe{sub 50}Pt{sub 50} film containing Cr and Cu additives was confirmed by the transmission electronic microscopy. Because of the Cr and Cu additives, the average grain size in the ordered Fe{sub 50}Pt{sub 50} film increased slightly; however, the coercivity of the ordered Fe{sub 50}Pt{sub 50} film is improved considerably.

36 MATERIALS SCIENCE↗

Influence of annealing atmosphere on the magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} sandwiched nanocomposite films

The magnetic properties of SiO{sub 2}/Fe/SiO{sub 2} nanocomposite films are studied by magnetic force microscopy and vibrating sample magnetometer. The films were fabricated by alternately depositing SiO{sub 2}, Fe, and SiO{sub 2} on Si substrates with magnetron sputtering followed by thermal annealing. It is found that the annealing atmosphere significantly influences the sample structure, composition, and magnetic properties. The samples annealed in forming gas show much better magnetic properties than those annealed in vacuum and in N{sub 2}. The saturation magnetization can reach 200 emu/g, fairly close to the value of bulk Fe, and the coercivity can reach 400 Oe, much higher than 10 Oe of the bulk Fe. X-ray photoelectron spectroscopic depth profile measurement was carried out to study the mechanism of the strong influence of annealing atmosphere. For the samples annealed in forming gas, Fe nanoparticles are mildly oxidized, forming thin shells of Fe{sub 2}O{sub 3} surrounding them, which is beneficial for maintaining the ferromagnetic behavior and enhancing the coercivity of nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Combinatorial investigation of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC

We have synthesized thin films of (Ti{sub 1-x}Nb{sub x}){sub 2}AlC by combinatorial method on TiC (111) seed layers grown on c-axis sapphire (Al{sub 2}O{sub 3}) substrates at 900 deg. C using magnetron sputter. X-ray diffraction showed the films to be c-axis oriented and epitaxial, and films contained a minor secondary phase of (Ti,Nb)C, irrespective of stoichiometry. Most notably, Raman spectroscopy suggest a sizable increase in the elastic modulus in the Nb-rich region as compared to either of the end members.

36 MATERIALS SCIENCE↗

Electrical and optical properties of Sn doped CuInO{sub 2} thin films: Conducting atomic force microscopy and spectroscopic ellipsometry studies

Tin doped CuInO{sub 2} thin films deposited by rf magnetron sputtering technique show columnar structure with (006) preferred orientation. Conducting atomic force microscopy measurements show the presence of nanoconductivity regions when the current flow direction is along the in-plane InO{sub 6} layer and absence of conducting regions when the current direction is along O-Cu-O layers perpendicular to the film surface. The strong anisotropy observed in the electrical properties of tin doped samples is due to the preferred crystallite orientation and highly anisotropic delafossite structure. A large change in the electrical conductivity value and activation energy value in undoped films and tin doped samples has also been explained in terms of change in crystallite orientation on doping. Spectroscopic ellipsometry measurements have been used to determine the optical constant and dielectric function of CuInO{sub 2} and CuInO{sub 2}:Sn films and show a band gap value of 4.5 eV in tin doped samples due to removal of structural defects.

36 MATERIALS SCIENCE↗

Phase transitions and electrical behavior of lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} thin film

Lead-free (K{sub 0.50}Na{sub 0.50})NbO{sub 3} (KNN) thin films with a high degree of (100) preferred orientation were deposited on the SrRuO{sub 3}-buffered SrTiO{sub 3}(100) substrate by off-axis radio frequency magnetron sputtering. They possess lower phase transition temperatures (T{sub o-t}approx120 deg. C and T{sub c}approx310 deg. C), as compared to those of KNN bulk ceramic (T{sub o-t}approx190 deg. C and T{sub c}approx400 deg. C). They also demonstrate enhanced ferroelectric behavior (e.g., 2P{sub r}=24.1 muc/cm{sup 2}) and fatigue endurance, together with a lower dielectric loss (tan deltaapprox0.017) and a lower leakage current, as compared to the bulk ceramic counterpart. Oxygen vacancies are shown to be involved in the conduction of the KNN thin film.

36 MATERIALS SCIENCE↗

Highly dense amorphous Nb{sub 2}O{sub 5} films with closed nanosized pores

This study is focused on tailoring the porosity of Nb{sub 2}O{sub 5} films during reactive pulsed magnetron sputtering. Dense amorphous films containing nanopores only in deeper regions have been grown at a high rate using substrate temperatures below 60 deg. C. The films exhibit a high refractive index, n{sub 400}=2.54, a low extinction coefficient, k{sub 400}{approx}6x10{sup -4}, a low mechanical stress (-90 MPa), and a negligible thermal shift. The specific depth distribution of the nanopores is believed to be the reason for the optimum trade-off between a high refractive index and low mechanical stress.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modification of magnetic properties and structure of Kr{sup +} ion-irradiated CrPt{sub 3} films for planar bit patterned media

30 keV Kr{sup +} ions were irradiated onto L1{sub 2} ordered CrPt{sub 3} (20 nm) alloy films fabricated by a magnetron sputtering deposition followed by an appropriate heat treatment, and the modification of the structure and magnetic properties of the CrPt{sub 3} films was investigated in detail. The fabricated L1{sub 2}CrPt{sub 3} (20 nm) onto a fused quartz substrate exhibited a quite large perpendicular anisotropy of 5x10{sup 6} ergs/cc, due to the large lattice distortion of 1%. The large perpendicular anisotropy decreased with increasing the ion dose, and became almost zero at the ion dose of 2x10{sup 14} ions/cm{sup 2} due to the loss of the magnetic order of CrPt{sub 3}. The suppression of the magnetic order of CrPt{sub 3} by the Kr{sup +} ion irradiation is attributed to the transformation of the structure from the L1{sub 2} phase to a disordered fcc phase, which was confirmed by x-ray diffraction analysis. Unlike the magnetization and perpendicular anisotropy, the anisotropy field of CrPt{sub 3} does not decrease significantly with the increase in the Kr{sup +} ion dose, and exhibited more than 20 kOe even at the ion dose of 1x10{sup 14} ions/cm{sup 2}. This is considered to be attributed that the lattice distortion of CrPt{sub 3} unchanged even at the Kr{sup +} ion dose of 2x10{sup 14} ions/cm{sup 2}.

36 MATERIALS SCIENCE↗

Ethanol gas sensitivity of carbon nanotip arrays/n-Si heterojunctions at room temperature

Carbon nanotip arrays were grown from silicon substrates via direct current magnetron sputtering at room temperature (RT). The simple carbon nanotip arrays/n-Si (C/Si) heterojunctions were used to detect ethanol gas at RT. The results show that the C/Si junctions have high ethanol gas sensitivity, rapid response, and high recovery speed at RT. Upon exposure to ethanol gas (0.64 g/l) at RT, the resistance of the junction decreases by 35% at a given positive voltage of 8 V. Moreover, the interface capacitance of the junction at 5 kHz can increase by about 40% rapidly when exposed to ethanol gas. The phenomena should be attributed to the change in the Fermi level of the carbon film caused by adsorbing electrons from ethanol molecules. The study shows that the C/Si junctions have potential application as ethanol gas sensors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The role of copper in ZnO/Cu/ZnO thin films for flexible electronics

ZnO/Cu/ZnO multilayer structures with very high conductivity have been obtained by magnetron sputtering. The Hall resistivity of the films was as low as 6.9x10{sup -5} OMEGA-cm with a carrier concentration of 1.2x10{sup 22} cm{sup -3} at the optimum copper layer thickness. The conduction mechanism has been explained in terms of metal to oxide carrier injection at low copper thickness and metal layer conduction at higher Cu thicknesses. The peak transmittance of the films is 88% and the photopic averaged transmittance is 75%. Optical transmission behavior of the films involves absorption by copper due to d-band to Fermi-surface transitions at short wavelengths and reflectance combined with scattering losses at long wavelengths. A Burstein-Moss shift in the band gap of the films is seen to take place with increase in thickness of the copper layer. The Haacke figure of merit has been calculated for the films with the best value being 8.7x10{sup -3} OMEGA{sup -1}. Pole figure results reveal that the copper midlayer acts as a hindrance to (002) ZnO texturing rather than as a seed layer. These results also confirm the mechanism of conduction. The results of the study assume further significance because annealing at 150 deg. C for up to 24 h in a reducing (Ar+5% H{sub 2}) ambient was found to have negligible effect on the properties of the films.

36 MATERIALS SCIENCE↗

Dynamic in situ observations of electrical and structural changes in thin thermoelectric (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films

Thin films of (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} were prepared by dc magnetron sputter deposition on different substrates. It is well known that thermal treatment of as-deposited p-type (Bi{sub 0.15}Sb{sub 0.85}){sub 2}Te{sub 3} films leads to an enhancement of the power factor. Whereas up to now only the initial (as deposited) and the final (after annealing) film stages have been investigated, here, the dynamic changes of sputter-deposited film properties have been observed by in situ measurements. The enhancement of the power factor shows a significant dependence on thermal treatment. The best thermoelectric films have been prepared at a substrate temperature of 170 deg. C, with a power factor of 24.4 muW/(cm K{sup 2}). The changes in the Seebeck and Hall coefficients are caused by the enhancement in the Hall mobility after annealing. In situ x-ray diffractometry shows the generation of additional Te in dependence of the temperature. This is also confirmed by energy-dispersive x-ray microanalysis and the corresponding mapping in a scanning electron microscope. It is supposed that the locally well-defined Te enrichment is the reason for the improvement in the integral film transport properties.

36 MATERIALS SCIENCE↗

Chemical structure of the (Zn{sub 1-x},Mg{sub x})O/CuIn(S,Se){sub 2} interface in thin film solar cells

The formation of the interface between a magnetron sputtered (Zn{sub 1-x},Mg{sub x})O buffer layer and a CuIn(S,Se){sub 2} absorber in thin film solar cells has been investigated by x-ray photoelectron spectroscopy and x-ray induced Auger electron spectroscopy. Detailed analysis of the spectra shows the incorporation of Zn into the absorber surface in the initial stage of the deposition process forming ZnS and/or ZnSe bonds. As a result we find the buffer layer to be Zn-depleted near the interface.

36 MATERIALS SCIENCE↗

Selective liquid crystal molecule orientation on ion beam irradiated tantalum oxide ultrathin films

We recently achieved the homogeneous alignment of liquid crystal (LC) on amorphous Ta{sub 2}O{sub 5} layers. This study demonstrates that LC layers could be aligned either homogeneously or vertically by increasing the growth temperature of rf magnetron sputtering device and the irradiation time of the DuoPIGatron type Ar ion beam device causing uniform and dense plasma. We attained two LC orientations by observing Ta 4f and O 1s peak shifts with x-ray photoelectron spectroscopy. Moreover, the decreased thickness of layers with high-k dielectric constants helped to decrease driving LC voltages and in turn to achieve low power consumption.

36 MATERIALS SCIENCE↗

Double side electroluminescence from p-NiO/n-ZnO nanowire heterojunctions

Double side light emission devices based on p-NiO/n-ZnO nanowire heterojunctions have been fabricated on indium tin oxide substrate by radio frequency magnetron sputtering combined with hydrothermal process. According to the energy band alignment, the detected broad visible and narrow ultraviolet electroluminescence arise from defect and band edge transitions in ZnO nanowires, respectively. The unique property of the double side emission is due to the nature of the large band gap of NiO film. It provides a good opportunity for the emission of a light emitting device with different colors on the top and back sides, simultaneously.

77 NANOSCIENCE AND NANOTECHNOLOGY↗