Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microscopic simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Microscopic diagnosis of universal geometric responses in fractional quantum Hall liquids

Topological quantum liquids contain internal degrees of freedom that are coupled to geometric response. Yet, an explicit and microscopic identification of the geometric response remains difficult. Here, taking notable fractional quantum Hall (FQH) states as typical examples, we systematically investigate a promising protocol—the Dehn-twist deformation on the torus geometry—to probe the geometric response of correlated topological states and establish the relation between such response and universal properties of pertinent states. Based on analytical derivations and numerical simulations, we find that the geometry-induced Berry phase encodes features for a broad class of FQH states at the Laughlin, hierarchy, Halperin and non-Abelian Moore-Read fillings. Our findings conclusively demonstrate that the adiabatic Dehn-twist deformation can faithfully capture rich geometric and topological information, including the Hall viscosity and topological spin of the pertinent FQH state and the chiral central charge of the underlying edge conformal field theory. Our approach provides a powerful way to reveal topological orders of generic FQH states and address previously open questions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron-beam mapping of plasmon resonances in electromagnetically interacting gold nanorods

Electron energy-loss spectroscopy and energy-filtered transmission electron-microscope imaging are used to characterize the energy distribution of the surface plasmon of isolated and coupled gold nanorods. Local-field enhancement and spectral shift of the plasmon modes are observed for two interacting nanoparticles. The spatial modes measured by energy loss are shown to share qualitative similarities with the electromagnetic field distribution around gold nanorods induced by optical excitation as simulated using the discrete dipole-approximation method.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Chaos in inhomogeneous neutrino fast flavor instability

In dense neutrino gases, the neutrino-neutrino coherent forward scattering gives rise to a complex flavor oscillation phenomenon not fully incorporated in simulations of neutron star mergers (NSM) and core collapse supernovae (CCSNe). Moreover, it has been proposed to be chaotic, potentially limiting our ability to predict neutrino flavor transformations in simulations. To address this issue, we explore how small flavor perturbations evolve in the nonlinear regime of the neutrino quantum kinetic equation within a narrow centimeter-scale region inside a NSM and a toy neutrino distribution. Our findings reveal that paths in the flavor state space of solutions with similar initial conditions diverge exponentially, exhibiting chaos. This inherent chaos makes the microscopic scales of neutrino flavor transformations unpredictable. However, the domain-averaged neutrino density matrix remains relatively stable, with chaos minimally affecting it. This particular property suggests that domain-averaged quantities remain reliable despite the exponential amplification of errors. Published by the American Physical Society 2024

Astronomy & Astrophysics↗

Phase Separation, Capillarity, and Odd-Surface Flows in Chiral Active Matter

Active phase separations evade canonical thermodynamic descriptions and have thus challenged our understanding of coexistence and interfacial phenomena. Considerable progress has been made towards a nonequilibrium theoretical description of these traditionally thermodynamic concepts. Spatial parity symmetry is conspicuously assumed in much of this progress, despite the ubiquity of chirality in experimentally realized systems. Here, in this Letter, we derive a theory for the phase coexistence and interfacial fluctuations of a system that microscopically violates spatial parity. We find suppression of the phase separation as chirality is increased as well as the development of steady-state currents tangential to the interface dividing the phases. These odd flows are irrelevant to stationary interfacial properties, with stability, capillary fluctuations, and surface area minimization determined entirely by the capillary surface tension. Using large-scale Brownian dynamics simulations, we find excellent agreement with our theoretical scaling predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Solving the Accelerator-Condenser Coupling Problem in a Nanosecond Dynamic Transmission Electron Microscope

We describe a modification to a transmission electron microscope (TEM) that allows it to briefly (using a pulsed-laser-driven photocathode) operate at currents in excess of 10 mA while keeping the effects of condenser lens aberrations to a minimum. This modification allows real-space imaging of material microstructure with a resolution of order 10 nm over regions several {micro}m across with an exposure time of 15 ns. This is more than 6 orders of magnitude faster than typical video-rate TEM imaging. The key is the addition of a weak magnetic lens to couple the large-diameter high-current beam exiting the accelerator into the acceptance aperture of a conventional TEM condenser lens system. We show that the performance of the system is essentially consistent with models derived from ray tracing and finite element simulations. The instrument can also be operated as a conventional TEM by using the electron gun in a thermionic mode. The modification enables very high electron current densities in {micro}m-sized areas and could also be used in a non-pulsed system for high-throughput imaging and analytical TEM.

47 OTHER INSTRUMENTATION↗

High temperature breakdown of the Stokes-Einstein relation in a computer simulated Cu-Zr melt

Transport properties and the Stokes-Einstein (SE) relation in liquid Cu{sub 8}Zr{sub 3} are studied by molecular dynamics simulation with a modified embedded atom potential. The critical temperature T{sub c} of mode coupling theory (MCT) is derived as 930 K from the self-diffusion coefficient D and viscosity η. The SE relation breaks down around T{sub SE} = 1900 K, which is far above T{sub c}. At temperatures below T{sub SE}, the product of D and η fluctuates around a constant value, similar to the prediction of MCT near T{sub c}. The influence of the microscopic atomic motion on macroscopic properties is investigated by analyzing the time dependent liquid structure and the self-hole filling process. The self-holes for the two components are preferentially filled by atoms of the same component. The self-hole filling dynamics explains the different breakdown behaviors of the SE relation in Zr-rich liquid CuZr{sub 2} compared to Cu-rich Cu{sub 8}Zr{sub 3}. At T{sub SE}, a kink is found in the temperature dependence of both partial and total coordination numbers for the three atomic pair combinations and of the typical time of self-hole filling. This indicates a strong correlation between liquid structure, atomic dynamics, and the breakdown of SE relation. The previously suggested usefulness of the parameter d(D{sub 1}/D{sub 2})/dT to predict T{sub SE} is confirmed. Additionally we propose a viscosity criterion to predict T{sub SE} in the absence of diffusion data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An adaptive extended finite element method for the analysis of agglomeration of colloidal particles in a flowing fluid

Direct numerical simulations of the flow-nanoparticle interaction in a colloidal suspension are presented using an extended finite element method (XFEM) in which the dynamics of the nanoparticles is solved in a fully-coupled manner with the flow. The method is capable of accurately describing solid-fluid interfaces without the need of boundary-fitted meshes to investigate the dynamics of particles in complex flows. In order to accurately compute the high interparticle shear stresses and pressures while minimizing computing costs, an adaptive meshing technique is incorporated with the fluid-structure interaction algorithm. The particle-particle interaction at the microscopic level is modeled using the Lennard-Jones (LJ) potential and the corresponding potential parameters are determined by a scaling procedure. The study is relevant to the preparation of inks used in the fabrication of catalyst layers for fuel cells. In this paper, we are particularly interested in investigating agglomeration of the nanoparticles under external shear flow in a sliding bi-periodic Lees-Edwards frame. The results indicate that the external shear has a crucial impact on the structure formation of colloidal particles in a suspension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hydration and Restructuring of Polar Polymer Interfaces: Implications in Antifouling and Responsive Materials

Manipulating polymer interfaces is crucial for understanding how structure influences function in applications spanning biofouling prevention to energy storage. Moreover, observing how polymers adapt their microscopic structure to changes in their local environment can reveal essential properties that govern their performance in such applications, providing key insights into how to design more effective interfaces. Here, in this study, a series of “grafting-from” polymer brushes with side chains varying in charge, are probed by sum frequency generation (SFG) and modeled using all-atom molecular dynamics (MD) simulations to elucidate how chemical makeup and charge mediate interfacial restructuring in dry versus hydrated states. Results show that charge, in progressing from nonpolar to cationic to zwitterionic, results in dramatic changes in interfacial structure and overall hydration. While net neutral systems, regardless of bulk phase polarity, show minimal interfacial water structuring, the cationic species exhibits strong bulk water signals from the surface potential. Meanwhile, the polymer brushes themselves restructure in water differently independent of charge, impacting the functional groups that are presented to the aqueous phase. Nonpolar and cationic species for instance undergo a change in alkyl group orientations to accommodate hydrating water molecules, whereas the zwitterionic polymer becomes completely disordered in water. Overall, the structure-based behavior trends presented herein have implications in antifouling applications and responsive material interfaces.

biointerface↗

Reliable electrochemical phase diagrams of magnetic transition metals and related compounds from high-throughput ab initio calculations

Abstract Magnetic transition metals (mTM = Cr, Mn, Fe, Co, and Ni) and their complex compounds (oxides, hydroxides, and oxyhydroxides) are highly important material platforms for diverse technologies, where electrochemical phase diagrams with respect to electrode potential and solution pH can be used to effectively understand their corrosion and oxidation behaviors in relevant aqueous environments. Many previous decades-old mTM–Pourbaix diagrams are inconsistent with various direct electrochemical observations, because experimental complexities associated with extracting reliable free energies of formation (Δ f G ) lead to inaccuracies in the data used for modeling. Here, we develop a high-throughput simulation approach based on density-functional theory (DFT), which quickly screens structures and compounds using efficient DFT methods and calculates accurate Δ f G values, using high-level exchange-correlation functions to obtain ab initio Pourbaix diagrams in comprehensive and close agreement with various important electrochemical, geological, and biomagnetic observations reported over the last few decades. We also analyze the microscopic mechanisms governing the chemical trends among the Δ f G values and Pourbaix diagrams to further understand the electrochemical behaviors of mTM-based materials. Last, we provide probability profiles at variable electrode potential and solution pH to show quantitatively the likely coexistence of multiple-phase areas and diffuse phase boundaries.

Huang, Liang-Feng (ORCID:0000000329375183)↗

Towards Universal Predictions with the TALYS Code

The increasing need for cross sections far from the valley of stability, for astrophysical as well as advanced technological applications poses a challenge for nuclear reaction models. So far, nuclear reaction cross sections calculations have relied on more or less phenomenological approaches, depending on several parameters that are adjusted, to available experimental data, or deduced from systematical relations. While such calculations are expected to be reliable for nuclei not too far from the experimentally known regions, it is clearly preferable to use more fundamental approaches, based on sound physical bases, when dealing with very exotic nuclei. Thanks to the high computer power available today, all the ingredients required to model a nuclear reaction can now be microscopically (or semi-microscopically) determined starting from a nucleon-nucleon effective interaction as sole input, and are available to the nuclear physics community. We have recently implemented all these microscopic ingredients in the TALYS nuclear reaction code, and we are now able to perform fully microscopic cross section calculations. We will discuss both the quality of these ingredients and the impact of using them instead of the usually adopted phenomenological parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Determination of polarization fields in group III-nitride heterostructures by capacitance-voltage-measurements

The polarization fields in wurtzite group III-nitrides strongly influence the optical properties of InAlGaN-based light emitters, e.g., the electron and hole wave function overlap in quantum wells. In this paper, we propose a new approach to determine these fields by capacitance-voltage measurements (CVM). Sheet charges generated by a change of the microscopic polarization at heterointerfaces influence the charge distribution in PIN junctions and therefore the depletion width and the capacitance. We show that it is possible to determine the strength and direction of the internal fields by comparing the depletion widths of two PIN junctions, one influenced by internal polarization fields and one without as a reference. For comparison, we conducted coupled Poisson/carrier transport simulations on the CVM of the polarization-influenced sample. We also demonstrate the feasibility and limits of the method by determining the fields in GaN/InGaN and GaN/AlGaN double heterostructures on (0001) c-plane grown by metal organic vapor phase epitaxy and compare both evaluation methods. The method yields (−0.50 ± 0.07) MV/cm for In{sub 0.08}Ga{sub 0.92}N/GaN, (0.90 ± 0.13) MV/cm for Al{sub 0.18}Ga{sub 0.82}N/GaN, and (2.0 ± 0.3) MV/cm for Al{sub 0.31}Ga{sub 0.69}N/GaN heterostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solvation structures of water in trihexyltetradecylphosphonium-orthoborate ionic liquids

Atomistic molecular dynamics simulations have been performed to investigate effective interactions of isolated water molecules dispersed in trihexyltetradecylphosphonium-orthoborate ionic liquids (ILs). The intrinsic free energy changes in solvating one water molecule from gas phase into bulk IL matrices were estimated as a function of temperature, and thereafter, the calculations of potential of mean force between two dispersed water molecules within different IL matrices were performed using umbrella sampling simulations. The systematic analyses of local ionic microstructures, orientational preferences, probability and spatial distributions of dispersed water molecules around neighboring ionic species indicate their preferential coordinations to central polar segments in orthoborate anions. The effective interactions between two dispersed water molecules are partially or totally screened as their separation distance increases due to interference of ionic species in between. These computational results connect microscopic anionic structures with macroscopically and experimentally observed difficulty in completely removing water from synthesized IL samples and suggest that the introduction of hydrophobic groups to central polar segments and the formation of conjugated ionic structures in orthoborate anions can effectively reduce residual water content in the corresponding IL samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimal shapes and fission barriers of nuclei within the liquid drop model

The fission barriers of medium and heavy nuclei are calculated looking for the minimum of liquid drop energy at fixed volume and elongation without using any shape parametrization. The fission barrier heights, obtained within the Lublin-Strasbourg drop model, are approximated by a simple analytical expression as functions of Z and (N-Z)/A only. In addition, using the topological theorem by Myers and SwiaPtecki that allows us to represent the barrier height as the sum of the ground-state microscopic correction (which is calculated and tabulated for all nuclei) and the liquid drop fission barrier, we propose a simple but quite accurate approximation of the fission barrier heights.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hydrodynamic flow amplitude correlations in event-by-event fluctuating heavy-ion collisions

The effects of event-by-event fluctuations in the initial geometry of colliding nuclei are important in the analysis of final flow observables in relativistic heavy-ion collisions. We use hydrodynamic simulations to study the amplitude correlations between different orders of event-by-event fluctuating anisotropic flow harmonics. While the general trends seen in the experimental data are qualitatively reproduced by the model, deviations in detail, in particular for peripheral collisions, point to the need for more elaborate future calculations with a hybrid approach that describes the late hadronic stage of the evolution microscopically. It is demonstrated explicitly that the observed anticorrelation between v 2 and v 3 is the consequence of approximately linear hydrodynamic response to a similar anticorrelation of the corresponding initial eccentricities ε 2 and ε 3 . For n > 3 , the hydrodynamic correlations between v 2,3 and v n deviate from the rescaled correlations among the corresponding initial eccentricities, demonstrating a nonlinear mode coupling effect in higher-order flows.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Social network structure and the spread of complex contagions from a population genetics perspective

Ideas, behaviors, and opinions spread through social networks. If the probability of spreading to a new individual is a non-linear function of the fraction of the individuals’ affected neighbors, such a spreading process becomes a “complex contagion”. This non-linearity does not typically appear with physically spreading infections, but instead can emerge when the concept that is spreading is subject to game theoretical considerations (e.g. for choices of strategy or behavior) or psychological effects such as social reinforcement and other forms of peer influence (e.g. for ideas, preferences, or opinions). Here we study how the stochastic dynamics of such complex contagions are affected by the underlying network structure. Motivated by simulations of complex contagions on real social networks, we present a framework for analyzing the statistics of contagions with arbitrary non-linear adoption probabilities based on the mathematical tools of population genetics. The central idea is to use an effective lower-dimensional diffusion process to approximate the statistics of the contagion. This leads to a tradeoff between the effects of ”selection” (microscopic tendencies for an idea to spread or die out), random drift, and network structure. Our framework illustrates intuitively several key properties of complex contagions: stronger community structure and network sparsity can significantly enhance the spread, while broad degree distributions dampen the effect of selection compared to random drift. Finally, we show that some structural features can exhibit critical values that demarcate regimes where global contagions become possible for networks of arbitrary size. Our results draw parallels between the competition of genes in a population and memes in a world of minds and ideas. Our tools provide insight into the spread of information, behaviors, and ideas via social influence, and highlight the role of macroscopic network structure in determining their fate.

59 BASIC BIOLOGICAL SCIENCES↗

A micro-alloyed ferritic steel strengthened by nanoscale precipitates

A ferritic steel with finely dispersive precipitates was investigated to reveal the fundamental strengthening mechanisms. The steel has a yield strength of 760 MPa, approximately three times higher than that of conventional Ti-bearing high strength hot-rolled sheet steels, and its ultimate tensile strength reaches 850 MPa with an elongation-to-failure value of 18%. Using energy dispersive X-ray spectroscopy (EDXS) and transmission electron microscope (TEM), fine carbides TiC with an average diameter of 10 nm were observed in the ferrite matrix of the 0.08%Ti steel, and some cubic M23C6 precipitates were also observed at the grain boundaries and the interior of the grains. The finely dispersive TiC precipitates in the matrix provide matrix strengthening. The estimated magnitude of precipitation strengthening is around 458 MPa, depending on the average size of the nanoscale precipitates. Dislocation densities increased from 3.42×1013 m-2 to 1.69 × 1014 m-2, respectively, with increasing tensile strain from 5.5% to 22%. The measured work-hardening behavior can be related to the observed dislocation accumulations resulting from the dispersive nano-scale precipitates.

36 MATERIALS SCIENCE↗

Hot Ductility and Compression Deformation Behavior of TRIP980 at Elevated Temperatures

The hot ductility tests of a kind of 980 MPa class Fe-0.31C (wt pct) TRIP steel (TRIP980) with the addition of Ti/V/Nb were conducted on a Gleeble-3500 thermomechanical simulator in the temperatures ranging from 873 K to 1573 K (600 °C to 1300 °C) at a constant strain rate of 0.001 s{sup −1}. It is found that the hot ductility trough ranges from 873 K to 1123 K (600 °C to 850 °C). The recommended straightening temperatures are from 1173 K to 1523 K (900 °C to 1250 °C). The isothermal hot compression deformation behavior was also studied by means of Gleeble-3500 in the temperatures ranging from 1173 K to 1373 K (900 °C to 1100 °C) at strain rates ranging from 0.01 s{sup −1} to 10 s{sup −1}. The results show that the peak stress decreases with the increasing temperature and the decreasing strain rate. The deformation activation energy of the test steel is 436.7 kJ/mol. The hot deformation equation of the steel has been established, and the processing maps have been developed on the basis of experimental data and the principle of dynamic materials model (DMM). By analyzing the processing maps of strains of 0.5, 0.7, and 0.9, it is found that dynamic recrystallization occurs in the peak power dissipation efficiency domain, which is the optimal area of hot working. Finally, the factors influencing hot ductility and thermal activation energy of the test steel were investigated by means of microscopic analysis. It indicates that the additional microalloying elements play important roles both in the loss of hot ductility and in the enormous increase of deformation activation energy for the TRIP980 steel.

36 MATERIALS SCIENCE↗

Comparisons between a priori Uncertainty Quantification and Calculation/Measurement Discrepancies Applied to the MERCI UO{sub 2} Fuel Rod Decay Heat Experiment

In 2008, an UO{sub 2} fuel rod was irradiated up to ∼ 3.5 GWd/tHL in the CEA/Saclay research reactor Osiris through the MERCI experiment. Some rod's pellets were analysed. Experimental results were obtained: - fuel rod decay heat measurement by calorimetry (cooling times from 27 minutes to 42 days), - evaluation of the amounts of some nuclei (U, Pu, Cs, Nd...) by isotopic dilution mass spectrometry, - nuclide activities. Comparison of type (C - M)/M where C is the calculated decay heat and M the experimentally measured decay heat was reported in reference. Neutronics flux was computed by CEA TRIPOLI-4 Monte-Carlo or APOLLO2 deterministic transport code system. Irradiation and cooling phases were simulated with CEA DARWIN/PEPIN2 code system. Good agreements were globally shown between numerical simulation results and experimental measurements on total decay heat. Uncertainty propagation in this previous work was established from Rebah's studies. These last years, within the framework of supports to its industrial partners EDF and Areva, the CEA/DEN has implemented two different approaches to propagate nuclear data uncertainties to depletion code outputs. A direct forward deterministic perturbation method using sensitivity profiles was implemented in the French industrial depletion code system DARWIN/PEPIN2. Meanwhile, a propagation based on Monte Carlo correlated sampling was achieved using the CEA uncertainty platform URANIE and the new generation depletion code MENDEL. Both methods will be described in this article. Uncertainties on nuclear data (independent fission yields, multigroup microscopic cross sections, radioactive decay constants, radioactive decay branching ratio and radioactive decay energies) are propagated to decay heat and isotopic concentrations. To match MERCI first study, flux computation is realized by APOLLO2. Furthermore, uncertainty quantification (UQ) is re-evaluated by both DARWIN/PEPIN2 and MENDEL codes. It is an important stage in the process of validating both depletion codes with their respective data library. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗