Search NASA⌕ Search

SEARCH · Search NASA

Results for “Net Zero”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Electrical properties of atomic layer deposited aluminum oxide on gallium nitride

We report on our investigation of the electrical properties of metal/Al{sub 2}O{sub 3}/GaN metal-insulator-semiconductor capacitors. We determined the conduction band offset and interface charge density of the alumina/GaN interface by analyzing the capacitance-voltage characteristics of atomic layer deposited Al{sub 2}O{sub 3} films on GaN substrates. The conduction band offset at the Al{sub 2}O{sub 3}/GaN interface was calculated to be 2.13 eV, in agreement with theoretical predications. A non-zero field of 0.93 MV/cm in the oxide under flat-band conditions in the GaN was inferred, which we attribute to a fixed net positive charge density of magnitude 4.60 x 10{sup 12 }cm{sup -2} at the Al{sub 2}O{sub 3}/GaN interface. We provide hypotheses to explain the origin of this charge by analyzing the energy band line-up.

36 MATERIALS SCIENCE↗

EFFECT OF AMBIPOLAR DIFFUSION ON THE NONLINEAR EVOLUTION OF MAGNETOROTATIONAL INSTABILITY IN WEAKLY IONIZED DISKS

We study the role of ambipolar diffusion (AD) on the nonlinear evolution of the magnetorotational instability (MRI) in protoplanetary disks using the strong coupling limit, which applies in very weakly ionized gas with electron recombination time much shorter than the orbital time so that a single-fluid treatment is sufficient. The effect of AD in this limit is characterized by the dimensionless number Am, the frequency at which neutral particles collides with ions normalized to the orbital frequency. We perform three-dimensional unstratified shearing-box simulations of the MRI over a wide range of Am as well as different magnetic field strengths and geometries. The saturation level of the MRI turbulence depends on the magnetic geometry and increases with the net magnetic flux. There is an upper limit to the net flux for sustained turbulence, corresponding to the requirement that the most unstable vertical wavelength be less than the disk scale height. Correspondingly, at a given Am, there exists a maximum value of the turbulent stress {alpha}{sub max}. For Am {approx}< 1, the largest stress is associated with a field geometry that has both net vertical and toroidal flux. In this case, we confirm the results of linear analyses that show the fastest growing mode has a non-zero radial wavenumber with a growth rate exceeding that of the pure vertical field case. We find there is a very tight correlation between the turbulent stress {alpha} and the plasma ({beta}) {identical_to} P{sub gas}/P{sub mag} {approx} 1/2{alpha} at the saturated state of the MRI turbulence regardless of field geometry, and {alpha}{sub max} rapidly decreases with decreasing Am. In particular, we find {alpha}{sub max} {approx} 7 x 10{sup -3} for Am = 1 and {alpha}{sub max} {approx} 6 x 10{sup -4} for Am = 0.1.

79 ASTRONOMY AND ASTROPHYSICS↗

Effect of air-entry angle on performance of a 2-stroke-cycle compression-ignition engine

An investigation was made to determine the effect of variations in the horizontal and vertical air-entry angles on the performance characteristics of a single-cylinder 2-stroke-cycle compression-ignition test engine. Performance data were obtained over a wide range of engine speed, scavenging pressure, fuel quantity, and injection advance angle with the optimum guide vanes. Friction and blower-power curves are included for calculating the indicated and net performances. The optimum horizontal air-entry angle was found to be 60 degrees from the radial and the optimum vertical angle to be zero, under which conditions a maximum power output of 77 gross brake horsepower for a specific fuel consumption of 0.52 pound per brake horsepower-hour was obtained at 1,800 r.p.m. and 16-1/2 inches of Hg scavenging pressure. The corresponding specific output was 0.65 gross brake horsepower per cubic inch of piston displacement. Tests revealed that the optimum scavenging pressure increased linearly with engine speed. The brake mean effective pressure increased uniformly with air quantity per cycle for any given vane angle and was independent of engine speed and scavenging pressure.

Earle, Sherod L↗

Aerosols consistently suppress the convective boundary layer development

Aerosols with different vertical distribution and various optical properties induce diverse heating rates and thereby affecting convective boundary layer (CBL) development. Our results showed consistent CBL-suppression of aerosols during daytime with numerical experiments, in which aerosols were specified at different heights with synthesized single scattering albedo from 64 studies and asymmetry factor from 20 studies globally. Absorbing aerosols concentrated below but close to the CBL top had the strongest suppression effect on CBL development relative to that concentrated near surface or above CBL. Aerosol cooling effect by attenuating incident solar radiation and surface heat flux exceeded its warming effect by reheating the atmosphere layer with absorbed shortwave radiation, and eventually declined net heating rate, which inhibited CBL development, lowered mixed-layer potential temperature and stabilized atmospheric stratification. Stove effect of absorbing aerosols (CBL enhancement) under a zero background aerosol extinction coefficient is negligible for dominant dome effect (CBL suppression) which consistently suppresses CBL development regardless of aerosol vertical height and background aerosol extinction coefficient. Our study also highlighted the importance of specifying background aerosol extinction coefficient in numerical experiments for accurate assessment of aerosol radiative forcing and CBL-aerosol interactions.

54 ENVIRONMENTAL SCIENCES↗

Modeling brittle fracture due to anisotropic thermal expansion in polycrystalline materials

Here, this work investigated brittle fracture of polycrystalline materials due to thermal stresses arising from anisotropic thermal expansion. We used phase-field fracture simulations with the properties of alpha-uranium (α-U) and assumed a linear elastic mechanical response. Three-dimensional simulations were used to predict fracture for various conditions and crystallographic textures. We found that fracture was more pronounced during cooling than during heating because the anisotropy increased with temperature. We also found that the total crack surface area increased with increasing average misorientation, while the net shape change of the material decreased with increasing misorientation. Two-dimensional simulations in which one crystallographic coefficient of thermal expansion (CTE) was set to zero indicated that the expansion behavior in the crystallographic direction with the smallest CTE was the primary cause of fracture.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Water flipping and the oxygen evolution reaction on Fe 2 O 3 nanolayers

Hematite photoanodes are promising for the oxygen evolution reaction, however, their high overpotential (0.5-0.6 V) for water oxidation and limited photocurrent make them economically unviable at present. The work needed to orient dipoles at an electrode surface may be an overlooked contribution to the overpotential, especially regarding dipoles of water, the electron source in the oxygen evolution reaction (OER). Here, we employ second harmonic amplitude and phase measurements to quantify the number of net-aligned Stern layer water molecules and the work associated with water flipping, on hematite, an earth abundant OER semiconductor associated with a high overpotential. At zero applied bias, the pH-dependent potentials for Stern layer water molecule flipping exhibit Nernstian behavior. At positive applied potentials and pH 13, approximately one to two monolayers of water molecules points the oxygen atoms towards the electrode, favorable for the OER. The work associated with water flipping matches the cohesive energy of liquid water (44 kJ mol -1 ) and the OER current density is highest. This current is negligible at pH 5, where the work approaches 100 kJ mol -1 . Our findings suggest a causal relationship between the need for Stern layer water flipping and the OER overpotential, which may lead to developing strategies for decreasing the latter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon cycle dynamics within Oregon’s urban-suburban-forested-agricultural landscapes

Our overarching goal was to develop and utilize an observation-based analysis framework to assess interactions between climate and mosaics of land use, land cover and urbanization on regional carbon, water, and energy dynamics, and potential changes associated with land management and climate. Carbon, water and energy cycling was quantified for the range of current and potential land uses under present and future climates. The study region of Oregon has a strong climatic gradient from the coastal mesic forests (2500mm ppt) to the Willamette Valley, Cascade Mountains, and the Northern Great Basin semi-arid “cold desert” to the east (300 mm). The study was focused on the effects of (1) conversion of semi-arid sagebrush and Willamette Valley agricultural crops to bioenergy production; (2) afforestation of idle land and rangelands deemed suitable for forests or poplar crops under future climate conditions. We found that net ecosystem production (NEP), the net of ecosystem photosynthesis and respiration, was 10 times higher in the high biomass forests of the Coast Range compared with drier regions like sagebrush in the Northern Great Basin, which was nearly zero (Schmidt et al. 2016). The state total NEP averaged about 30 teragrams carbon (Tg C) per year for the years 2012 to 2014 using our model framework that we developed for predictions of current and future NEP, and compared well with our detailed inventory estimates (28 Tg C annual average for 2011-2015 for forests only; Law et al. 2017). Running our model framework until the year 2050, we found that climate alone only increased NEP by less than 1 Tg C per decade (~3%) using the current trajectory of carbon dioxide emissions, however, changes are expected to be more rapid in subsequent years. We evaluated the possibility of land use change from grass seed crops to poplar for bioenergy, which slightly increased NEP by 2050. The most important variable for carbon sequestration estimates (net carbon sources and sinks) is net ecosystem carbon balance (NECB), which accounts for NEP and losses associated with harvest removals and wildfire emissions. Here, we focus on forests because they have the largest effect on carbon sequestration. We found that NECB in Oregon averaged 18.8 Tg C per year in 2011-2015, offsetting fossil fuel emissions (16 Tg C per year). Annual fire emissions reducing NECB by about 5% (0.97 Tg C per year) in the state. The mesic Coast Range and West Cascades ecoregions that make up the western third of Oregon account for 60% of the forest NECB. This analysis illustrates that annual emissions from forests disturbances are low relative to annual fossil fuel emissions for the same area (Law et al. 2017, Hudiburg et al. in review).

09 BIOMASS FUELS↗

Performability analysis using semi-Markov reward processes

Beaudry (1978) proposed a simple method of computing the distribution of performability in a Markov reward process. Two extensions of Beaudry's approach are presented. The method is generalized to a semi-Markov reward process by removing the restriction requiring the association of zero reward to absorbing states only. The algorithm proceeds by replacing zero-reward nonabsorbing states by a probabilistic switch; it is therefore related to the elimination of vanishing states from the reachability graph of a generalized stochastic Petri net and to the elimination of fast transient states in a decomposition approach to stiff Markov chains. The use of the approach is illustrated with three applications.

Ciardo, Gianfranco↗

"Coulombic Viscosity" In Granular Materials: Planetary and Astrophysical Implications

The term "Coulombic viscosity" is introduced here to define an empirically observed phenomenon from experiments conducted in both microgravity, and in ground-based 1-g conditions. In the latter case, a sand attrition device was employed to test the longevity of aeolian materials by creating two intersecting grain-circulation paths or cells that would lead to most of the grain energy being expended on grain-to-grain collisions (simulating dune systems). In the areas in the device where gravitationally-driven grain-slurries recycled the sand, the slurries moved with a boundary-layer impeded motion down the chamber walls. Excessive electrostatic charging of the grains during these experiments was prevented by the use of an a.c. corona (created by a Tesla coil) through which the grains passed on every cycle. This created both positive and negative ions which neutralized the triboelectrically-generated grain charges. When the corona was switched on, the velocity of the wall-attached slurries increased by a factor of two as approximately determined by direct observation. What appeared to be a freely-flowing slurry of grains impeded only by intergranular mechanical friction, had obviously been significantly retarded in its motion by electrostatic forces between the grains; with the charging reduced, the grains were able to move past one another without a flow "viscosity" imposed by the Coulombic intergranular forces. A similar phenomenon was observed during microgravity experiments aboard Space Shuttle in USML-1 & USML-2 spacelabs where freely-suspended clouds of sand were being investigated for their potential to for-m aggregates. In this environment, the grains were also charged electrostatically (by natural processes prior to flight), but were free from the intervention of gravity in their interactions. The grains were dispersed into dense clouds by bursts of air turbulence and allowed to form aggregates as the ballistic and turbulent motions damped out. During this very brief (30-60 sec) damping period, motion of the grains was observed to be retarded by the electrostatic interactions. The fact that the grains almost instantly formed aggregates was evidence that their ballistic motions had been constrained and redirected by the dipole-dipole interactions that led to filamentary aggregate development. Undoubtedly, the "Coulombic viscosity" of the cloud assisted in damping grain motion so rapidly. The electrostatically-induced grain-cloud viscosity or drag exerted on grain motion, is a complex function of three major parameters: charge magnitude, charge sign, and mean intergranular distance. The above experiments illustrate one particular type of granular behavior. The discussion here will therefore be restricted to drag relationships: (a) between grains that are naturally charged triboelectrically and thus exhibit dipole-dipole attractions between one another even if there are slight net charges present (which can be overwhelmed by dipole coupling at short distances), and (b) between grains that are densely spaced where the intergranular distance varies between zero and some value (usually tens or hundreds of grain diameters) that permits each grain to detect the dipole moment of another grain -- the distance is not so great that other grains appears as neutral electrical "singularities. I. Aeolian transport: During motion of grains in a saltation cloud (on Earth, Mars, or Venus), triboelectric charging must occur as a result of multiple grain contacts, and by friction with the entraining air. A situation might develop that is similar to the one described above in the attrition device: grain motion becoming significantly retarded (reduced flux) as grains find it increasingly difficult to either separate from the surface, or to pass one another without Coulombic retarding forces. A "Coulombic drag" will exist at flux initiation and increase with time to work in direct opposition to the aerodynamic drag that drives the grain motion. It is predicted that this will lead to an increase with time of both the aerodynamic and bed-dilatancy thresholds (3). Because of Paschen discharge effects in the martian atmosphere, the electrostatic charging in a saltation cloud may be partially abated, but this will lead to greater grain mobility, more charging, and thus to a charge-discharge steady state mediated by mechanical interactions. II. Dry colluvial systems: Sand avalanches on dunes, dry debris flows, talus flows, avalanches, and pyroclastic surges are examples of gravity-driven, dense granular flows where rock/grain fragmentation and grain-to-grain interactions cause triboelectrification (sometimes augmented by other electrical charging processes), and where the grain densities of the systems are such that strong dipole-dipole interactions between grains might be expected to be present. Because it is expected that the Coulombic forces between grains will cause a sluggishness or enhanced granular-flow viscosity, the motion of a grain mass will be retarded or damped so that this will assist, ultimately, in terminating the flow. The greatest Coulombic viscosity will be created in the most highly charged systems, which will also be the most energetic. Thus, grain flows have some tendency to be self-limiting by internal energy partitioning; gravitational potential is converted to Coulombic potential, which manifests itself as a drag force between the grains. III. Volcanic eruption plumes and impact ejecta curtains: The violence of these systems leads to powerful electrical charging of particulates. Lightning storms emanating from volcanic plumes are a testimony to the levels of charging. As pyroclastic grains interact forcefully and frequently within eruption plumes, it is reasonable to predict that the internal turbulent motions of the plume will be significantly damped by the Coulombic viscosity exerted by grain charges. Additional information is contained in the original.

Marshall, J. R.↗

Non-Tidal Non-Seasonal Oceanic Mass Redistribution Estimated from the TOPEX/Poseidon Observation

Topex/Poseidon altimetry data are used to estimate the non-tidal mass redistribution as a function of space-time. The goal is to study the contribution of ocean circulations in the geodynamic effects including Earth's rotational and gravitational variations. We examine the non-seasonal anomalies at monthly sampling rate over the T/P span of eight years, concentrating especially on interannual variabilities. Since the sea-surface height data obtained from altimetry is the combined effect of steric change (primarily thermal effect) and the mass flux, and because the former has zero contribution to the geodynamic effects, one needs to do a so-called steric correction by removing from the altimetry data the steric contributions. We achieve it using multiyear monthly sea-surface temperature maps, together with monthly "climatology" for mixed-layer depth maps for mean-months of the year. We analyze both sets of the altimetry data and the steric correction data using the empirical orthogonal function/principal component analysis (in which we take care of issues associated with the area-weighting and non-zero mean), and examine the most important modes, either globally or regionally. In particular, the ENSO in the tropical Pacific/Indian Oceans exhibits the most prominent pattern. The net mass transport after the steric correction can then be compared with: (1) ocean general circulation model outputs for the same period of time (such as from POCM-4B); (2) non-atmospheric Earth rotation variations obtained from space geodesy data and atmospheric angular momentum data; (3) non-atmospheric low-degree gravitational variations from satellite-laser-ranging observations and global atmospheric data.

Chao, Benjamin F.↗

Decarbonization scenarios of the U.S. Electricity system and their costs

Decarbonizing the electricity system to zero-carbon emission is crucial for climate change mitigation. Previous studies have shown that such a transition in the United States (U.S.) may lead to higher system cost compared to a business-as-usual case, but it is not well-known how the cost of electricity generation varies at sub-regional level under the transition, and studies have rarely evaluated the trade-off between the cost and avoided climate damages, as well as the potential roles of negative emission technologies (NETs) in the electricity decarbonization. In this work, we present a regionally resolved national model to quantify the cost of decarbonizing the U.S. electricity system under a set of possible scenarios. The results show that, compared to the reference scenario without a decarbonization policy, reaching zero CO 2 emission by 2050 would incur, depending on the scenarios, 335-494 billion USD additional cost to the U.S. electric power sector during 2020-2050. The regional costs of electricity generation ranges from 2.4 to 4.7 cent/kWh, largely due to the generation profiles and renewable resources availability of those regions. The additional costs can be translated to an average CO 2 abatement cost of 29-59 USD/metric ton CO 2 (with 2%-7% discount rates), which are comparable to the social cost of carbon in the literature at around 4% discount rate. The results also show that the cost of mitigating the last few percent CO 2 emission from the U.S. electricity system may exceed the costs of NETs, indicating an opportunity for NETs to contribute to electricity decarbonization.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Optical characterization of semi-insulating GaAs - Determination of the Fermi energy, the concentraion of the midgap EL2 level and its occupancy

The key electronic characteristics of semiinsulating GaAs, i.e., the Fermi energy, concentration, and occupancy of the midgap donor EL2, and the net concentration of ionized acceptors can all be determined from high-resolution measurements of the EL2 intracenter absorption. The procedure is based on the measurement of zero-phonon line intensity before and after the complete transfer of EL2 to its metastable state followed by thermal recovery. The procedure is quantitative, involves no fitting parameters, and unlike existing methods, is applicable even when a significant part of the EL2 is ionized.

Lagowski, J.↗

An Assessment of Ozone Photochemistry in the Extratropical Western North Pacific: Impact of Continental Outflow During the Late Winter/Early Spring

This study examines the influence of photochemical processes on tropospheric ozone distributions over the extratropical western North Pacific. The analysis presented here is based on data collected during the Pacific Exploratory Mission-West Phase B (PEM-West B) field study conducted in February-March 1994. Sampling in the study region involved altitudes of 0-12 km and latitudes of 10deg S to 50deg N. The extratropical component of the data set (i.e., 20-50deg N) was defined by markedly different photochemical environments north and south of 30deg N. This separation was clearly defined by an abrupt decrease in the tropopause height near 30deg N and a concomitant increase in total O3 column density. This shift in overhead O3 led to highly reduced rates of O3 formation and destruction for the 30-50deg N latitude regime. Both latitude ranges, however, still exhibited net O3 production at all altitudes. Of special significance was the finding that net O3 production prevailed even at boundary layer and lower free tropospheric altitudes (e.g., less than 4 km), a condition uncommon to Pacific marine environments. These results reflect the strong impact of continental Outflow of O3 precursors (e.g., NO and NMHCS) into the northwestern Pacific Basin. Comparisons with PEM-West A, which sampled the same region in a different season (September-October), revealed major differences at altitudes below 4 km, the altitude range most influenced by continental outflow. The resulting net rate of increase in the tropospheric O3 column for PEM-West B was 1-3 % per day, while for PEM-West A it was approximately zero. Unique to the PEM-West B study is the finding that even under wintertime conditions substantial column production of tropospheric O3 can occur at subtropical and mid-latitudes. While such impacts may not be totally unexpected at near coast locations, the present study suggests that the impact from continental outflow on the marine BL could extend out to distances of more than 2000 km from the Asian Pacific Rim.

Crawford, J.↗

Self-Amplified Surface Charging and Partitioning of Ionic Liquids in Nanopores

Here, we study ion partitioning and self-charging of nanoporous electrodes with room-temperature ionic liquids using a classical density-functional theory that accounts for molecular-excluded volume effects and electrostatic correlations. Nanopores of zero electrical potential are predicted to favor adsorption of small ions even without specific surface attraction, and the imbalanced distributions of cations and anions inside the pore induces a net surface charge that promotes further enrichment of small ions. The self-amplified ion partitioning is most significant when the nanopore and the ionic species are of comparable dimension.

36 MATERIALS SCIENCE↗

Quantum Nonlinear Hall Effect Induced by Berry Curvature Dipole in Time-Reversal Invariant Materials

It is well known that a nonvanishing Hall conductivity requires broken time-reversal symmetry. However, we demonstrate that Hall-like currents can occur in second-order response to external electric fields in a wide class of time-reversal invariant and inversion breaking materials, at both zero and twice the driving frequency. This nonlinear Hall effect has a quantum origin arising from the dipole moment of the Berry curvature in momentum space, which generates a net anomalous velocity when the system is in a current-carrying state. The nonlinear Hall coefficient is a rank-two pseudotensor, whose form is determined by point group symmetry. We discus optimal conditions to observe this effect and propose candidate two- and three-dimensional materials, including topological crystalline insulators, transition metal dichalcogenides, and Weyl semimetals.

36 MATERIALS SCIENCE↗

Absolute measurement of the extreme UV solar flux

A windowless rare-gas ionization chamber has been developed to measure the absolute value of the solar extreme UV flux in the 50-575-A region. Successful results were obtained on a solar-pointing sounding rocket. The ionization chamber, operated in total absorption, is an inherently stable absolute detector of ionizing UV radiation and was designed to be independent of effects from secondary ionization and gas effusion. The net error of the measurement is + or - 7.3 percent, which is primarily due to residual outgassing in the instrument, other errors such as multiple ionization, photoelectron collection, and extrapolation to the zero atmospheric optical depth being small in comparison. For the day of the flight, Aug. 10, 1982, the solar irradiance (50-575 A), normalized to unit solar distance, was found to be 5.71 + or - 0.42 x 10 to the 10th photons per sq cm sec.

Carlson, R. W.↗

Assessment of the global monthly mean surface insolation estimated from satellite measurements using global energy balance archive data

Global sets of surface radiation budget (SRB) have been obtained from satellite programs. These satellite-based estimates need validation with ground-truth observations. This study validates the estimates of monthly mean surface insolation contained in two satellite-based SRB datasets with the surface measurements made at worldwide radiation stations from the Global Energy Balance Archive (GEBA). One dataset was developed from the Earth Radiation Budget Experiment (ERBE) using the algorithm of Li et al. (ERBE/SRB), and the other from the International Satellite Cloud Climatology Project (ISCCP) using the algorithm of Pinker and Laszlo and that of Staylor (GEWEX/SRB). Since the ERBE/SRB data contain the surface net solar radiation only, the values of surface insolation were derived by making use of the surface albedo data contained GEWEX/SRB product. The resulting surface insolation has a bias error near zero and a root-mean-square error (RMSE) between 8 and 28 W/sq m. The RMSE is mainly associated with poor representation of surface observations within a grid cell. When the number of surface observations are sufficient, the random error is estimated to be about 5 W/sq m with present satellite-based estimates. In addition to demonstrating the strength of the retrieving method, the small random error demonstrates how well the ERBE derives from the monthly mean fluxes at the top of the atmosphere (TOA). A larger scatter is found for the comparison of transmissivity than for that of insolation. Month to month comparison of insolation reveals a weak seasonal trend in bias error with an amplitude of about 3 W/sq m. As for the insolation data from the GEWEX/SRB, larger bias errors of 5-10 W/sq m are evident with stronger seasonal trends and almost identical RMSEs.

Li, Zhanqing↗

Vortobots

The term vortobots denotes proposed swimming robots that would have dimensions as small as micrometers or even nanometers and that would move in swarms through fluids by generating and exploiting vortices in a cooperative manner. Vortobots were conceived as means of exploring confined or otherwise inaccessible fluid environments: they are expected to be especially attractive for biomedical uses like examining the interiors of blood vessels. The main advantage of the vortobot concept, relative to other concepts for swimming microscopic robots, is that the mechanisms for locomotion would be relatively simple and, therefore, could be miniaturized more easily. For example, only a simple spinning paddle would be required to generate a vortex around a vortobot (see Figure 1). The difficulty is that a smart swarming and cooperative control algorithm would be necessary for purposeful locomotion. This necessity arises because, as a consequence of basic principles of vortex dynamics, an isolated single vortex cannot move by itself because its induced flow at the center is zero; however, a vortex can move other vortices by the induced flow. By cleverly adjusting the strength and sign of each member in a group of vortices, the group can achieve net translational motion in the preferred direction through cooperation. Figure 2 presents two simple examples that serve to illustrate the principle of cooperative motion of vortobots. For the sake of simplicity, these examples are based on an idealized two-dimensional potential flow of an inviscid, incompressible liquid. The example of the upper part of the figure is of two vortices of equal magnitude and opposite sign. The centers of the vortices would move along parallel paths. The example of the lower part of the figure is of two vortices of the same magnitude and sign. In this case, both vortices would move in a circle in diametrically opposite positions. More complex motions can be obtained by introducing more vortices (or pairs of vortices) and choosing different vortex strengths and orientations.

Park, Han↗