Search NASA⌕ Search

SEARCH · Search NASA

Results for “Overpotential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,187 records · Page 66

Metal-ligand catalysts for selective promotion of electrochemical CO 2 RR

The electrochemical carbon dioxide reduction reaction (CO 2 RR) provides opportunities to synthesize value-added products from this greenhouse gas in a sustainable manner. Efficient catalysts for this reaction are provided that selectively drive CO 2 reduction over the thermodynamic and kinetically competitive hydrogen evolution reaction (HER) in organic or aqueous electrolytes. The catalysts are metal-polypyridyl coordination complexes of a redox non-innocent terpyridine-based pentapyridine ligand and a first-row transition metal. The metal-ligand cooperativity in [Fe(tpyPY2Me)]2+ drives the electrochemical reduction of CO 2 to CO at low overpotentials with high selectivity for CO 2 RR (>90%).

Derrick, Jeffrey S.↗

An Initial Study of Uranium Morphology in Fused LiCl-KCl

Molten salt electrorefining is one method by which reusable constituents within used nuclear fuel can be recovered for recycle and especially radiotoxic isotopes removed for incorporation into tailored waste forms. In these processes, irradiated metallic uranium or uranium alloys are dissolved at an electrochemical anode and crystals of purified uranium are collected at a cathode. The morphology of the deposited crystals can impact a variety of important factors, including the adhesion characteristics of the deposit to the cathode surface and the amount of salt which is macroscopically and microscopically occluded with the deposit. In addition, future applications such as direct creation of nuclear fuels by electrochemical deposition might be enabled if the science and fundamentals of uranium deposition morphology were thoroughly understood. A reasonable amount of experience has been collected from uranium electrorefining within the range of typical plant conditions. However, only limited laboratory study has been performed to define and understand the range of uranium crystal morphologies under repeatable laboratory conditions. The present study was an initial step to define these morphologies and transitions. The deposit from each deposition potential was primarily composed of a different morphology with little crossover of that morphology into the other deposition potentials. The spacing of these experiments (overpotentials of 25, 150 and 450 mV) is wide enough that additional dominant morphologies could exist. In addition, while the majority of the deposit from each potential was comprised of a particular morphology, minor morphologies were also found within the deposit. This may indicate the presence of an additional dimension of complexity, namely uranium concentration. Additional experimental and theoretical studies would be valuable to elucidate this subject. Additional results will be presented and discussed. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

HydroGEN: Low Temperature Electrolysis

In low temperature electrolysis (LTE), it is imperative to both enhance and explore durability and demonstrate the opportunities for anion exchange membrane-based water electrolysis (AEMWE). The advantage of alkaline-based systems is primarily reduced capital cost: high pH enabling platinum group metal (PGM)-free catalysts and coatings, and the enhanced stability of those components compared to proton exchange membrane (PEM) -based systems. Compared to the water-only fed AEMWE in previous LTE 2.0 work, supporting electrolytes can allow for a significant improvement in performance through higher site-access and stability by reducing utilization and overpotential stresses that lead to catalyst layer delamination.

HYDROGEN↗

Modeling Ni Coarsening under Humid Atmosphere in the Electrode of Solid Oxide Cells

Ni coarsening is an important degradation mechanism in solid oxide cells. It is reported that Ni coarsening is faster under a humid atmosphere experimentally, but the underline mechanism is not well understood. In this work, Ni coarsening through Ni(OH)x surface diffusion was investigated by a combination of density-functional theory (DFT) and phase-field modeling (PFM). DFT is used to evaluate the surface coverage and diffusivity of Ni(OH)x on Ni (111) surface and the results are used as an input to the PFM to simulate Ni coarsening under humid atmospheres on both reconstructed and synthetic microstructures. It is found that steam partial pressure and microstructure effect alone cannot explain the faster Ni coarsening under a humid atmosphere observed experimentally. Large local overpotential in fuel cell mode is needed to explain the fast Ni coarsening.

Lei, Yinkai↗

When and Where Lithium Plating Occurs, Its Correlation with Microstructure Heterogeneity, and the Mechanisms That Initiate and Self-Regulate Electrochemical Heterogeneity (A02-0444)

A microstructure scale electrochemical LIB model was used to investigate lithium plating onset, material non-uniform utilization, and in-plane heterogeneities for an NMC-graphite full cell. Model predicts active material particle surface roughness and size distribution (respectively, non-uniform curvature within and between particles) initiate in-plane heterogeneity, and that particle size heterogeneity at the separator interface controls the lithium plating preferential deposition ("Where"). These in-plane heterogeneities are then exacerbated by through-plane heterogeneities induced at fast charge as electrolyte depletion occurs and concentrates intercalation reaction near the anode-separator interface. Also, magnitude and occurrence of lithium plating is controlled by effective, or macroscale, microstructure parameters ("When"). As local states of charge start to diverge between nearby active material regions, overpotential differences induced by OCP difference kick in and contribute to reduce these SOC local heterogeneities. However, for staged materials such as graphite, with OCP profile alternating between plateaus and varying regions, this balancing mechanism is, respectively, inactive and active. This leads to a dynamic, non-monotonic, in-plane heterogeneity time evolution for state of charge and Faraday current density, for which their respective in-plane heterogeneity magnitude alternates. Such behavior has been modeled both for the whole electrode at the microstructure scale and at the particle scale. In-plane heterogeneities are usually considered to be detrimental, as they result in material non-uniform utilization (i.e., under and over stressed regions) and earlier degradations. However, this work provides a more granular approach as it discriminates between a harmful in-plane heterogeneity (non-uniform curvature) that triggers SOC in-plane heterogeneity, and a beneficial in-plane heterogeneity (Faraday current density) that contributes to reduce SOC in-plane heterogeneity. This work comprehensively explains the mechanisms that initiate, exacerbate, and regulate heterogeneity at the microstructure scale, while providing some design suggestions to reduce both in-plane and through-plane heterogeneities, as summarized in the graphical abstract.

ADVANCED PROPULSION SYSTEMS↗

HydroGEN: Low Temperature Electrolysis

In low temperature electrolysis (LTE), it is imperative to both enhance and explore durability and demonstrate the opportunities for anion exchange membrane-based water electrolysis (AEMWE). The advantage of alkaline-based systems is primarily reduced capital cost: high pH enabling platinum group metal (PGM)-free catalysts and coatings, and the enhanced stability of those components compared to proton exchange membrane (PEM) -based systems. Compared to the water-only fed AEMWE in previous LTE 2.0 work, supporting electrolytes can allow for a significant improvement in performance through higher site-access and stability by reducing utilization and overpotential stresses that lead to catalyst layer delamination.

HYDROGEN↗

3D CFD Model of a Multi-Cell High Temperature Electrolysis Stack

A three-dimensional computational fluid dynamics (CFD) electrochemical model has been created to model high-temperature electrolysis stack performance and steam electrolysis in the Idaho National Laboratory Integrated Lab Scale (ILS) experiment. The model is made of 60 planar cells stacked on top of each other operated as Solid Oxide Electrolysis Cells (SOEC). Details of the model geometry are specific to a stack that was fabricated by Ceramatec, Inc1. and tested at the Idaho National Laboratory. Inlet and outlet plenum flow and distribution are considered. Mass, momentum, energy, and species conservation and transport are provided via the core features of the commercial CFD code FLUENT2. A solid-oxide fuel cell (SOFC) model adds the electrochemical reactions and loss mechanisms and computation of the electric field throughout the cell. The FLUENT SOFC userdefined subroutine was modified for this work to allow for operation in the SOEC mode. Model results provide detailed profiles of temperature, Nernst potential, operating potential, activation overpotential, anode-side gas composition, cathode-side gas composition, current density and hydrogen production over a range of stack operating conditions. Variations in flow distribution, and species concentration are discussed. End effects of flow and per-cell voltage are also considered.

08 HYDROGEN↗

Recent Developments in the Electrocatalysis of the O2 Reduction Reaction

The electrocatalytic oxygen reduction reaction (ORR) lies at the heart of low-temperature proton exchange membrane fuel cells. Despite its apparent simplicity, to understand the mechanism of the ORR and overcome the significant overpotential associated with it has occupied the attention of researchers worldwide in recent years, with some important questions remaining open. This chapter reviews some of the recent developments in ORR research. In particular, we discuss the recent findings on the adsorptions of oxygenated species and specific anions and their implications for the ORR; the coverage- and potential-dependent nature of the ORR mechanism on Pt; the synergistic interplay between experiment and theory that has led to the development of a novel class of mixed Pt monolayer catalysts, which possess markedly higher ORR activity than commercial Pt catalysts; and the factors that affect the stability of the Pt catalysts and a novel method that we have recently identified which stabilizes the Pt catalysts by modifying them with Au.

30 DIRECT ENERGY CONVERSION↗

Pseudo one-dimensional analysis of polymer electrolyte fuel cell cold-start

This paper investigates the electrochemical kinetics, oxygen transport, and solid water formation in polymer electrolyte fuel cell (PEFC) during cold start. Following [Yo Wang, J. Electrochem. Soc., 154 (2007) B1041-B1048], we develop a pseudo one-dimensional analysis, which enables the evaluation of the impact of ice volume fraction and temperature variations on cell performance during cold-start. The oxygen profile, starvation ice volume fraction, and relevant overpotentials are obtained. This study is valuable for studying the characteristics of PEFC cold-start.

36 MATERIALS SCIENCE↗

In Situ-Grown ZnCo2O4 on Single-Walled Carbon Nanotubes as Air Electrode Materials for Rechargeable Lithium–Oxygen Batteries

Although lithium-oxygen (Li-O2) batteries have great potential to be used as one of the next generation energy storage systems due to their ultrahigh theoretical specific energy, there are still many significant barriers before their practical applications. These barriers include electrolyte and electrode instability, poor ORR/OER efficiency and cycling capability, etc. Development of a highly efficient catalyst will not only enhance ORR/OER efficiency, it may also improve the stability of electrolyte because the reduced charge voltage. Here we report the synthesis of nano-sheet-assembled ZnCo2O4 spheres/single walled carbon nanotubes (ZCO/SWCNTs) composites as high performance air electrode materials for Li-O2 batteries. The ZCO catalyzed SWCNTs electrodes delivered high discharge capacities, decreased the onset of oxygen evolution reaction by 0.9 V during charge processes, and led to more stable cycling stability. These results indicate that ZCO/SWCNTs composite can be used as highly efficient air electrode for oxygen reduction and evolution reactions. The highly enhanced catalytic activity by uniformly dispersed ZnCo2O4 catalyst on nanostructured electrodes is expected to inspire

Environmental Molecular Sciences Laboratory↗

The Impact of Huge Structural Changes on Electron Transfer and Measurement of Redox Potentials: Reduction of ortho -12-Carborane

A massive structural change accompanies electron capture by the 1,2-dicarba-closo-dodecaborane cage molecule (1). Bimolecular electron transfer (ET) by pulse radiolysis found a reduction potential of E 0 = –1.92 V vs Fc +/0 for 1 and rate constants that slowed greatly for ET to or from 1 when the redox partner had a potential near this E 0 . Moreover, two electrochemical techniques could detect no current at potentials near E 0 , finding instead peaks or polarographic waves near –3.1 V, which is 1.2 V more negative than E 0 . Voltammetry could determine rate constants, but only near –3.1 V. DigiSim simulations can describe the irreversible voltammograms but require electrochemical rate constants near 1 × 10 –10 cm/s at E 0 , a factor of 10 –10 relative to molecules undergoing facile ET. This factor of 10 –10 compared to ~10–5 for bimolecular ET introduces a puzzle. This puzzle can be understood as a manifestation of one of the “Frumkin Effects” in which only part of the applied voltage is available to drive ET at the electrode.

14 SOLAR ENERGY↗

Improved Oxygen Reduction Reaction Activity of Nanostructured CoS 2 through Electrochemical Tuning

Searching for efficient Pt-free oxygen reduction reaction (ORR) electrocatalysts has been actively pursued among the current electrocatalyst research community. The family of transition-metal chalcogenides, especially cobalt disulfide (CoS 2 ), has been reported as competitive ORR catalysts. In this work, we perform a detailed analysis of the intrinsic activity in terms of onset potentials and selectivity toward hydrogen peroxide of CoS 2 in both acid and alkaline medium. Our detailed characterizations of this system via X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and calculated bulk and surface thermodynamics and ORR mechanism reveal pH-dependent electrochemical evolution of the CoS 2 surfaces. Using XPS results before and after ORR in combination with density functional theory (DFT) calculations for individual surfaces reveals sulfur to oxygen substitution, and partial dissolution occurs in acidic media, while thin cobalt oxide films supported by CoS 2 are formed in alkaline media. The comprehensive DFT calculations of the ORR activities on these systems reveal that sulfur is an unlikely ORR active site, while undercoordinated Co metal site in the CoS 2 is less active than very active undercoordinated Co metal site in the Co oxide film. Using these guiding principles, we then demonstrate that electrochemical lithium (Li) tuning of CoS 2 in organic electrolyte increases its ORR performance in both acid and alkaline medium. Detailed characterizations demonstrate that the grain size of CoS 2 particle is considerably reduced and has a much richer surface oxygen content after electrochemical Li tuning (LiET-CoS 2 ) as the direct consequence of the Li galvanostatic cycling. The general efficacy of this method toward transition-metal chalcogenides (T-M-X) is further demonstrated by enhanced ORR activities of CoS and Ni 3 S 2 in alkaline and neutral medium, respectively. This work opens up an opportunity for probing more advanced T-M-X-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pathway to Complete Energy Sector Decarbonization with Available Iridium Resources using Ultralow Loaded Water Electrolyzers

We present ultralow Ir-loaded (ULL) proton exchange membrane water electrolyzer (PEMWE) cells that can produce enough hydrogen to largely decarbonize the global natural gas, transportation, and electrical storage sectors by 2050, using only half of the annual global Ir production for PEMWE deployment. This represents a significant improvement in PEMWE's global potential, enabled by careful control of the anode catalyst layer (CL), including its mesostructure and catalyst dispersion. Using commercially relevant membranes (Nafion 117), cell materials, electrocatalysts, and fabrication techniques, we achieve at peak a 250× improvement in Ir mass activity over commercial PEMWEs. An optimal Ir loading of 0.011 mg Ir cm -2 operated at an Ir-specific power of ~100 MW kg Ir -1 at a cell potential of ~1.66 V versus RHE (85% higher heating value efficiency). Here, we further evaluate the performance limitations within the ULL regime and offer new insights and guidance in CL design relevant to the broader energy conversion field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

Embedding a lithiated cobalt oxide spinel (Li 2 Co 2 O 4 , or LiCoO 2 ) component or a nickel-substituted Li2Co 1-x NixO 2 analogue in structurally integrated cathodes such as xLi 2 MnO 3 .(1-x)LiM'O 2 (M' = Ni/Co/Mn) has been recently proposed as an approach to advance the performance of lithium-ion batteries. Here, we first revisit the phase stability and electrochemical performance of LiCoO 2 synthesized at different temperatures using density functional theory calculations. Consistent with previous studies, we find that the occurrence of low- and high-temperature structures (i.e., cubic lithiated spinel LT-LiCoO 2 ; or Li 2 Co 2 O 4 (Fd$\overline{3m}$) vs trigonal-layered HT-LiCoO 2 (R$\overline{3m}$), respectively) can be explained by a small difference in the free energy between these 20 30 40 50 60 70 80 26 two compounds. Additionally, the observed voltage profile of a Li/LiCoO 2 cell for both cubic and trigonal phases of LiCoO 2 , as well as the migration barrier for lithium diffusion from an octahedral (O h ) site to a tetrahedral site (T d ) in Fd$\overline{3m}$ LT-Li 1-x CoO 2 , has been calculated to help understand the complex electrochemical charge/discharge processes. A search of LiCo x M 1-x O 2 lithiated spinel (M' = Ni or Mn) structures and compositions is conducted to extend the exploration of the chemical space of Li-Co-Mn-Ni-O electrode materials. We predict a new lithiated spinel material, LiNi 0.8125 Co 0.1875 O 2 (Fd$\overline{3m}$), with a composition close to that of commercial, layered LiNi 0.8 Co 0.05 Al 0.05 O 2 , which may have the potential for exploitation in structurally integrated, layered spinel cathodes for next generation lithium-ion batteries.

25 ENERGY STORAGE↗

Oxidative decomposition mechanisms of lithium peroxide clusters: an Ab Initio study

Oxidative decomposition of solid lithium peroxide is an important part of the charging process in a Li-O 2 battery. Here, we investigate oxidative decomposition mechanisms of lithium peroxide clusters as molecular models for solid lithium peroxide using density functional methods to understand charging processes in advanced energy storage systems. Most calculations are done using a (Li 2 O 2 ) 4 cluster with similar results obtained from a larger (Li 2 O 2 ) 16 cluster. Reaction pathways of the clusters involving different sequences of oxidation, oxygen evolution, lithium cation removal, and spin excitation are investigated. The computations suggest that certain oxidative decomposition routes may not have dependence on the oxygen evolution or Li-ion removal kinetics due to the exothermicity of oxygen removal and Li + removal (by solvent) upon oxidation. The computed charge potentials evaluated using a tetramer model indicates that it is possible to have low overcharge potential provided there exists a good electronic conductivity to facilitate the oxidative decomposition. Finally, oxidation potentials of a series of Li x O y clusters are investigated to assess their dependence on stoichiometry and how the local site from which the electrons are being removed affects the charge potentials.

74 ATOMIC AND MOLECULAR PHYSICS↗

Review—Understanding and Mitigating Some of the Key Factors that Limit Non-Aqueous Lithium-Air Battery Performance

In this article, we have reviewed our work on understanding and mitigating some of the key factors that limit non-aqueous Li-air battery performance. Advances in Li-air battery technology require fundamental understanding of the discharge and charge processes. We first summarize an investigation of Li-air batteries based on a well-defined cathode surfaces having size-selected silver clusters. This work provided key insight into the nucleation and growth mechanism of the discharge product and its relationship to lowering charge potentials. We then describe the development of new cathode materials including ones based on Pd and Mo2C nanoparticles that give very low charge potentials. This work has shown that it is possible to achieve very good round-trip efficiencies as well as up to 100 cycles in a Li-air cell. Finally, we discuss investigations of likely sources of electrolyte decomposition at the cathode and anode, which need to be resolved in order to achieve the long cycle life that is necessary to enable Li-air batteries.

charge overpotential↗