SEARCH · Search NASA
Results for “Partitioning”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Effect of ceramic perform geometry on load partitioning in A1{sub 2}O{sub 3}-Al composites with three-dimensional periodic arhitecture.
Interpenetrating Al{sub 2}O{sub 3}/Al composites were created by liquid-metal infiltration of 3D periodic ceramic preforms with face-centered-tetragonal symmetry produced by direct-write assembly. Volume-averaged lattice strains in the ceramic phase of the composite were measured by synchrotron X-ray diffraction for various levels of uniaxial compression stresses. Load transfer is found to occur from the metal phase to the ceramic phase, and the magnitude of the effect is in general agreement with simple rule-of-mixtures models. Spatially resolved diffraction measurements show variations in load transfer at two different positions within the composite for the elastic- and damage-deformation regimes, the latter being observed using phase-enhanced synchrotron imaging. The mechanical behavior of these interpenetrating Al{sub 2}O{sub 3}/Al composites with face-centered-tetragonal symmetry are compared with previous interpenetrating Al{sub 2}O{sub 3}/Al composites with simple-tetragonal symmetry.
Strain Partitioning in Ultra-Fine Grained Medium-Manganese Transformation Induced Plasticity Steel
Abstract Not Provided
Microstructure and phase stress partition of Mo fiber reinforced CuZnAl composite
Abstract not provided
KdV charges and the generalized torus partition sum in T T ‾ deformation
Not Available
A Data-Oriented Profiler to Assist in Data Partitioning and Distribution for Heterogeneous Memory in HPC
Explore the source record for details and available documents.
A study of graph partitioning schemes for parallel graph community detection
Not Available
Nickel and iron partitioning between clay minerals, Fe-oxides and Fe-sulfides in lagoon sediments from New Caledonia
In the tropics, continental weathering and erosion are major sources of trace metals towards estuaries and lagoons, where early diagenesis of sediments may influence their mobility and bioavailability. Determining trace metals speciation in tropical sedimentary settings is thus needed to assess their long-term fate and potential threat to fragile coastal ecosystems. In this study, we determined Fe, Ni and S speciation across a shore-to-reef gradient in sediments from the New Caledonia lagoon that receive mixed contribution from lateritic (iron-oxyhydroxides and clay minerals), volcano-sedimentary (silicates) and marine (carbonate) sources. Sulfur K-edge XANES data indicated a major contribution of pyrite (FeS 2 ) to S speciation close to the shore. However, this contribution was found to dramatically decrease across the shore-to-reef gradient, S mainly occurring as sulfate close to the coral reef. In contrast, Fe and Ni K-edge XANES and EXAFS data indicated a minor contribution of pyrite to Fe and Ni speciation, and this contribution could be evidenced only close to the shore. The major fractions of Fe and Ni across the shore-to-reef gradient were found to occur as Ni- and Fe-bearing clay minerals consisting of smectite (~nontronite), glauconite and two types of serpentines (chrysotile and greenalite/berthierine). Among these clay minerals, greenalite/berthierine, glauconite and possibly smectite, were considered as authigenic. The low contribution of pyrite to trace metals speciation compared to clay minerals is interpreted as a result of (1) a reduced formation rate due to the low amounts of organic carbon compared to the Fe pool and (2) repeated re-oxidation events upon re-suspension of the sediments top layers due to the specific context of shallow lagoon waters. This study thus suggests that green clay authigenesis could represent a key process in the biogeochemical cycling of trace metals that are delivered to lagoon ecosystems upon continental erosion and weathering.
Examination of carbon partitioning into austenite during tempering of bainite
The redistribution of carbon after tempering of a novel nanocrystalline bainitic steel consisting of a mixture of supersaturated ferrite and retained austenite has been analyzed by atom probe tomography. No direct evidence supporting the additional carbon enrichment of austenite beyond that initially achieved during the bainite heat treatment was obtained during subsequent tempering of this high carbon, high silicon steel.
Partitioning sources of CO 2 emission after soil wetting using high-resolution observations and minimal models
Wetting dry soil triggers a pulse of microbial respiration. Respiration pulses after wetting can be complex, evolving through several stages before subsiding—possibly reflecting contributions from multiple carbon (C) sources. In this work we hypothesized that respiration after wetting combines C from cellular sources (notably trehalose, a cellular osmo-protectant) and soluble extracellular C made available by the physical effects of wetting, with cellular sources contributing early during the pulse and extracellular C dominating later. We tested this hypothesis by making measurements of soil respiration, microbial biomass, trehalose, and water extractable organic C after wetting dry soil in the laboratory. We then devised several alternative minimal models to evaluate the potential contributions of trehalose and extracellular C to the respiration pulse. We found that the chloroform-labile fraction of the microbial biomass was comprised of 50% trehalose in dry soil. Both trehalose and water extractable organic C pools declined rapidly after wetting; trehalose disappeared within 3 h of water addition. Chloroform-labile glucose increased 3 h after water addition and then declined, suggesting rapid hydrolysis of trehalose and consumption of the resulting glucose. Respiration dynamics after wetting could be best explained by models that included two C sources, combining rapid metabolism of trehalose with slower consumption of extracellular soluble C. These results suggest that pulses of respiration after wetting reflect both osmolyte consumption within the microbial biomass and enhanced extracellular C availability; hence, models of microbial drought response must account for both processes to fully resolve soil C dynamics.
Use of wastes derived from earthquakes for the production of concrete masonry partition wall blocks
Highlights: > Solved the scientific and technological challenges impeding use of waste rubble derived from earthquake, by providing an alternative solution of recycling the waste in moulded concrete block products. > Significant requirements for optimum integration on the utilization of the waste aggregates in the production of concrete blocks are investigated. > A thorough understanding of the mechanical properties of concrete blocks made with waste derived from earthquake is reported. - Abstract: Utilization of construction and demolition (C and D) wastes as recycled aggregates in the production of concrete and concrete products have attracted much attention in recent years. However, the presence of large quantities of crushed clay brick in some the C and D waste streams (e.g. waste derived collapsed masonry buildings after an earthquake) renders the recycled aggregates unsuitable for high grade use. One possibility is to make use of the low grade recycled aggregates for concrete block production. In this paper, we report the results of a comprehensive study to assess the feasibility of using crushed clay brick as coarse and fine aggregates in concrete masonry block production. The effects of the content of crushed coarse and fine clay brick aggregates (CBA) on the mechanical properties of non-structural concrete block were quantified. From the experimental test results, it was observed that incorporating the crushed clay brick aggregates had a significant influence on the properties of blocks. The hardened density and drying shrinkage of the block specimens decreased with an increase in CBA content. The use of CBA increased the water absorption of block specimens. The results suggested that the amount of crushed clay brick to be used in concrete masonry blocks should be controlled at less than 25% (coarse aggregate) and within 50-75% for fine aggregates.
Coordination of carbon partitioning and photosynthesis by a two-component signaling network in Synechococcus elongatus PCC 7942
Not Available