Search NASA⌕ Search

SEARCH · Search NASA

Results for “Program characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Characterization of the Contaminated Soil Under the Hanford 324 Building B Cell, Washington, USA - 12182

The 324 Building on the Hanford site played a key role in radiochemical and metallurgical research programs conducted by DOE. The B hot cell in the 324 Building was the site of high-level waste vitrification research. During clean-out operations in November 2009, a tear was noted in the stainless steel liner on the floor of B Cell. Exposure rate readings taken at various locations in the soil about 0.5 meters below B Cell reached 8,900 Roentgen (R) per hour, confirming the existence of a significant soil contamination field. The source of the radioactive material was likely a 510 L spill from the Canister Fabrication Project, consisting of purified, concentrated Cs-137 and Sr-90 solutions totaling 48,000 TBq (1.3 MCi). MCNP modeling was used to estimate that the measured exposure rates were caused by 5,900 TBq (160 kCi) of Sr- 90 and Cs-137, although additional contamination was thought to exist deeper in the soil column. Two physical soil samples were obtained at different depths, which helped verify the contamination estimates. A detailed exposure rate survey inside B Cell was combined with additional MCNP modeling to estimate that an additional 1,700 TBq (460 kCi) is present just below the floor. Based on the results of the sampling campaign, it is likely that the radioactive material below B Cell is primarily consists of feed solutions from the FRG Canister Fabrication Project, and that it contains purified Sr-90 and Cs-137 with enough actinide carryover to make some of the soil transuranic. The close agreement between the Geoprobe calculations and the physical samples adds confidence that there are more than 3700 TBq (100,000 Ci) of Sr-90 and Cs-137 in the soil approximately 1 meter below the cell floor. The majority of the Cs-137 is contained in the first meter of soil, while significant Sr-90 contamination extends to 10 meters below the cell floor. It is also likely that an additional 15,000 TBq (400,000 Ci) of Cs-137 and Sr-90 activity is present directly below the floor of the cell, and that the residual activity inside the cell is only half of the previous estimates. However, the partitioning of activity between residuals in the cell and in the soil below the floor is much more uncertain than the activity calculations associated with the Geoprobe measurements. Taken together, the calculated soil activities represent about half of the spill associated with the FRG Canister Fabrication project. The remainder of the spill is believed to have remained in the cell, where the majority has been removed as part of cell cleanup activities. The magnitude of the soil contamination below 324 B Cell is sobering, and it represents one of the most challenging remediation activities in the DOE complex. Of course, safe remediation begins with a good understanding of the magnitude of the problem. As a result, additional modeling and cross-comparison efforts are planned for 2012. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Complete the first phase of the comprehensive characterization of repair welding performed on irradiated Ni alloy 182

This report describes the research activities on post-weld evaluation and characterization of the quality and properties of welds made on the first phase of repair welding campaign on irradiated Ni alloy 182. The equipment and capabilities of the campaign were developed jointly by the U.S. Department of Energy, Office of Nuclear Energy, Light Water Reactor Sustainability Program, the Electric Power Research Institute, Long Term Operations Program (and the Welding and Repair Technology Center), and Oak Ridge National Laboratory. Irradiated nickel alloy 182 with doped boron ranging from 5 wppm to 15 wppm, were laser welded in the hot cell. The weld samples were cross-sectioned and characterized. The significant, on-going effort to weld irradiated alloys with high helium concentrations and comprehensively analyze the results will eventually yield validated repair techniques and guidelines for use by the nuclear industry in extending the operational lifetimes of nuclear power plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Idaho National Laboratory Integrated Multisite SSHAC Level 3: Probabilistic Volcanic Hazards Assessment

The Idaho National Laboratory (INL) resides on the eastern Snake River Plain (ESRP), part of the Snake River Plain (SRP) with a complex origin and geologic history of volcanism. Much of the Quaternary (last 2.58 million years) volcanism within 400 km of INL is genetically associated with a major thermal anomaly referred to as the Yellowstone hotspot, which is currently located more than 180 km northeast of INL. Near INL, local volcanic sources include silicic domes near its southern border, and numerous dike-fed basaltic vents of the ESRP, some of which are near or within the INL boundaries. Quantitative probabilistic assessments of screened-in volcanic hazardous phenomena for nine different facility complexes at the INL are presented for a Senior Seismic Hazard Analysis Committee (SSHAC) Level 3 (SL3) study. The comprehensive, integrated multisite SSHAC study consists of a single regional Probabilistic Volcanic Hazards Assessment (PVHA) that pertains to all nine INL facility complexes, with site-specific information developed at each respective area of interest (AOI), referred to as the "INL facility AOI" (Figure ES-1). Hazard products are generated for specified INL facility AOIs for use by multiple stakeholders from different agencies in risk-informed decision-making regarding site selection, operations, and design of nuclear facilities at INL, consistent with U.S. Department of Energy (DOE) and U.S. Nuclear Regulatory Commission (NRC) regulatory guidance. The study also serves as the basis for future periodic safety assessments required for existing DOE facilities, such as 10-year evaluations of natural-phenomena hazards. Elements of the INL PVHA including initial characterization, screening, quantitative assessments of eruption and hazard potential, and consideration of facility needs are conducted using the three phases of the SSHAC process: evaluation, integration, and documentation. As per regulatory guidance, the SSHAC framework provided the necessary processes and procedures for the PVHA Technical Integration (TI) team, at three workshops, five formal working meetings and many TI team remote meetings, to conduct initial characterization, screen the volcanic hazards, create PVHA model inputs, exercise those models in the PVHA, consider facility-specific volcanic hazard needs, and perform final hazard calculations. The Participatory Peer Review Panel (PPRP) provided independent oversight and performed process and technical reviews of the PVHA throughout its duration. The study included an extensive New Data Collection and Analyses (NDCA) program developed by the PVHA TI team to reduce uncertainties in hazard-significant elements in the PVHA model. NDCA activities generated 20 reports providing important contributory datasets and results to the project database for characterizing the ESRP. For example, a report compiling the dimensions of ESRP shield volcanoes and lava fields was used to construct volcanic footprints (areas of impact), was compared with data from INL subsurface cores, and was used to validate the results of lava-flow inundation modeling on the contemporary terrain. Another example is the acquisition of aeromagnetic data over INL and its surrounding area, with maps of buried magmatic features (e.g., subsurface volcanoes and swarms of feeder dikes) that informed the PVHA conceptual model of volcanism. The SSHAC evaluation process was used to conduct all elements of the PVHA including initial characterization and screening. Existing data and NDCA activities provided the foundation to develop the tectonomagmatic conceptual model of volcanism for the region of geographical interest in the SRP and Yellowstone hotspot volcanic system, and for considering volcanoes in the western US. Considering Quaternary volcanic sources active during this period, the screening approach identified and evaluated magma compositions, types of eruptive and intrusive phenomena, types of hazardous phenomena, and proximity of sources to INL. The PVHA TI team evaluated 18 types of magmatic sources in terms of 20 potentially hazardous phenomena, resulting in 360 screening decisions. The screening process resulted in 140 screened-in hazardous volcanic phenomena for Quaternary volcanic sources 1) proximal to INL facility complexes in the ESRP (64 basaltic and 54 silicic), 2) regional sources associated with the Yellowstone caldera system and Blackfoot Reservoir volcanic field (7), and 3) more distal sources from thirteen Cascade volcanoes and two volcanoes at Long Valley caldera (CA).

58 GEOSCIENCES↗

Multipurpose Energetic Materials by Shuffling Nitro Groups on a 3,3′‐Bipyrazole Moiety

Abstract A family of 3,3′‐bipyrazole‐based energetic compounds having C‐NO 2 /N‐NO 2 functionalities was synthesized by using various nitrating conditions. These nitro derivatives of bipyrazole are significantly more dense and energetic compared to the corresponding nitropyrazole analogues while maintaining the desired thermal stability and sensitivity. Depending on the number and nature of energetic nitro groups (C‐NO 2 /N‐NO 2 ), different classes of energetic materials, such as green primary explosives, high‐performance secondary explosives and heat‐resistant explosives, were obtained. All the compounds were thoroughly characterized by IR, NMR [ 1 H, 13 C{ 1 H}, 15 N], elemental analysis, and differential scanning calorimetry (DSC). Four were also structurally characterized with single‐crystal X‐ray diffraction studies. Heats of formation and detonation performance were calculated using Gaussian 03 and EXPLO5 v6.01 programs, respectively.

Kumar, Dheeraj↗

Aerobic oxidation of alcohols over Ru-Mn-Ce and Ru-Co-Ce catalysts: The effect of calcination temperature

We report two ternary mixed oxides, Ru-Mn-Ce and Ru-Co-Ce, were prepared by a co-precipitation method and used in the aerobic oxidation of alcohols to corresponding aldehydes (ketones). Interestingly, different catalytic results were obtained when these compounds were calcined. The calcination temperature had an adverse effect on the catalytic performance of Ru-Mn-Ce catalysts, while being beneficial to the Ru-Co-Ce catalysts. To illustrate these effects, these materials were characterized using X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), Temperature-programmed reduction (TPR), Electron paramagnetic resonance (EPR) and other techniques. The data showed that ruthenium oxides were uniformly dispersed in the mixed oxides, and phase transformations occur after calcination. Mn 3 O 4 was transformed to MnO 2 for the Ru-Mn-Ce catalyst, while CoO(OH) was transformed to Co 3 O 4 in the Ru-Co-Ce catalyst. The interactions between ruthenium oxides and Co (Mn)-Ce mixed oxides of the former strengthened while the latter weakened. Calcination decreased the content of adsorbed oxygen and restricted oxygen transfer mechanism in the manganese system, while the opposite effect was observed with the cobalt-containing catalyst. Under optimal reaction conditions, various kinds of alcohols were transformed to corresponding aldehydes (ketones) in high yields over the Ru-Mn-Ce catalyst suggesting these ternary oxides are environmental friendly and economical catalytic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Device Feasibility Analysis of Multi-level FeFETs for Neuromorphic Computing

As an emerging non-volatile memory device technology, Ferroelectric Field-Effect Transistors (FeFETs) can enable low-power, adaptive intelligent system design. However, device dimension and operating voltage dependent reliability issues of scaled FeFETs can ultimately lead to degraded performance in solving machine learning tasks. In this article, detailed experimental characterization of FeFET devices of different dimensions have been carried out to explicitly evaluate the non-ideal behavior in device conductance programming properties like number of programming states, cycle-to-cycle (C2C) variations, device-to-device (D2D) variations, and state retention. A hardware-aware software simulation approach has been adopted to capture the adversarial effects of the non-idealities on recognition accuracy through algorithm-level performance assessment by including them in NeuroSim, a popular neural network hardware simulator, to execute a neural network model considering all other hardware constraints. With the added non-idealities, significant accuracy degradation has been observed compared to the ideal scenarios where D2D variations play the most critical role. Thereafter, feasibility of a variation-aware training method has been evaluated to tackle the accuracy drop.

42 ENGINEERING↗

Combining RAVEN, RELAP5-3D, and PHISICS for Fuel Cycle and Core Design Analysis for New Cladding Criteria

The Nuclear Regulatory Commission (NRC) has considered revision of 10 CFR 50.46C rule to account for the effects of burn-up rate in future analysis of reactor accident scenarios so that safety margins may evolve with the operation and reloading of the reactor as dynamic limits. In order to find these limiting conditions, both cladding oxidation and maximum temperature must be cast as functions of fuel exposure. It is computationally intensive to run a plant model through a long duration operational transient to the time of fuel reload, and this must be repeated for each reload until the time of the accident scenario. Moreover, fuel reload patterns may differ in many ways so that calculations with many different core configurations must be considered. To perform such new analyses in a reasonable amount of computational time with good accuracy, Idaho National Laboratory (INL) has developed new multi-physics tools by combining existing codes and adding new capabilities. The Parallel Highly Innovative Simulation INL Code System (PHISICS) toolkit for neutronic and reactor physics is coupled with the Reactor Excursion and Leak Analysis Program (RELAP5-3D) for the Loss of Coolant Accident (LOCA) analysis and RAVEN for the Probabilistic Risk Assessment (PRA) and margin characterization analysis. Expansion of code capability was also necessary. For RELAP5-3D to process a single sequence of cores in a continuous run required modification of RELAP5-3D to restart a sequence of input decks, each with a slightly modified neutronics model or thermal-hydraulic flow region and culminating in an accident scenario. A new multi-deck input processing capability was developed and verified for this analysis. In conclusion, the combined RAVEN/PHISICS/RELAP5-3D tool is used to analyze a typical Pressurized Water Reactor (PWR).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Reference Implementation for a Quantum Message Passing Interface

Practical applications of quantum computing are currently limited by the number of qubits that can be set with reasonable fidelities for each system. Therefore, a distributed quantum computing system with multiple quantum computers coherently connected is highly demanding. To realize the internode communication of quantum information, the software interface, Quantum Message Passing Interface (QMPI), leveraging the framework built for classical MPI but taking advantage of quantum teleportation to communicate between different quantum nodes was proposed. In this project, we develop the QMPI with point-to-point and collective operations in Qiskit and characterize its performance by demonstrating the application implementations. Moreover, we developed a new technique for optimizing collective communication of the distributed quantum programs with Multi-Controlled Toffoli gates. This technique beats the state-of-the-art in terms of fidelity and the number of remote EPR pairs consumed in both simulations and experiments.

Shi, Yue↗

Fundamental Studies of Charge Migration and Delocalization Relevant to Solar Energy Conversion

This program aimed to understand the molecular-level principles by which complex chemical systems carry out photochemical charge separation, transport, and storage, and how these insights could impact the design of practical solar energy conversion and storage devices. Towards these goals, this program focused on: (1) carrying out fundamental mechanistic and transient dynamical studies of proton-coupled electron-transfer (PCET) reactions; (2) characterizing and interrogating via electron paramagnetic resonance (EPR) spectroscopic methods novel conjugated materials that feature large charge delocalization lengths; and (3) exploring excitation delocalization and migration, as well as polaron transport properties of meso-scale assemblies that are capable of segregating light-harvesting antennae, nanoscale wire-like conduction elements, and distinct oxidizing and reducing environments.

14 SOLAR ENERGY↗

Deployment and Overview of RAVEN Capabilities for a Probabilistic Risk Assessment Demo for a PWR Station Blackout

Starting in 2012, Idaho National Laboratory (INL) has been engaged to provide tools and methodologies to support a new approach to safety assessment and management of safety related issues for Nuclear Power Plants (NPPs). This activity is placed under the Risk Informed Safety Margin Characterization (RISMC) [2] umbrella that is one of the technical paths of the Department Of Energy (DOE) Light Water Reactor Sustainability (LWRS) Program. RISMC takes a broader approach to risk evaluation by generating more comprehensive information. This information is used to gain a more accurate estimation of risk margins and to highlight feasible improvements that seek the optimal point between risk mitigation and economical viability of the nuclear energy option. This is, of course, done without taking any judgmental approach with respect to risk, which is a regulatory body task, and the economical viability, which is up to the single states and the open electricity market. RISMC is therefore composed of methodologies and tools. The augmented information that RISMC seeks to generate, as enabling decision tool, is not holistic with respect all possible metrics and operational aspects of a power plant; it is rather channeled toward the improvement of safety and the associated economical impact. While these are indeed two very broad metrics, they still allow a focus within the development of the underlying tools that, in a resource constrained environment (DOE founding, computational, mathematical) maximize the benefit of the program to the nuclear industry.

99 GENERAL AND MISCELLANEOUS↗

Radiation Leukemogenesis at Low Dose Rates

The major goals of this program were to study the efficacy of low dose rate radiation exposures for the induction of acute myeloid leukemia (AML) and to characterize the leukemias that are caused by radiation exposures at low dose rate. An irradiator facility was designed and constructed that allows large numbers of mice to be irradiated at low dose rates for protracted periods (up to their life span). To the best of our knowledge this facility is unique in the US and it was subsequently used to study radioprotectors being developed for radiological defense (PLoS One. 7(3), e33044, 2012) and is currently being used to study the role of genetic background in susceptibility to radiation-induced lung cancer. One result of the irradiation was expected; low dose rate exposures are ineffective in inducing AML. However, another result was completely unexpected; the irradiated mice had a very high incidence of hepatocellular carcinoma (HCC), approximately 50%. It was unexpected because acute exposures are ineffective in increasing HCC incidence above background. This is a potential important finding for setting exposure limits because it supports the concept of an 'inverse dose rate effect' for some tumor types. That is, for the development of some tumor types low dose rate exposures carry greater risks than acute exposures.

61 RADIATION PROTECTION AND DOSIMETRY↗

Comparison of electron beam and laser beam powder bed fusion additive manufacturing process for high temperature turbine component materials

The evolving 3D printer technology is now at the point where some turbine components could be additive manufactured (AM) for both development and production purposes. However, this will require a significant evaluation program to qualify the process and components to meet current design and quality standards. The goal of the project was to begin characterization of the microstructure and mechanical properties of Nickel Alloy X (Ni-22Cr-18Fe-9Mo) test bars fabricated by powder bed fusion (PBF) AM processes that use either an electron beam (EB) or laser beam (LB) power source. The AM materials produced with the EB and LB processes displayed significant differences in microstructure and resultant mechanical properties. Accordingly, during the design analysis of AM turbine components, the specific mechanical behavior of the material produced with the selected AM process should be considered. Comparison of the mechanical properties of both the EB and LB materials to those of conventionally processed Nickel Alloy X materials indicates the subject AM materials are viable alternatives for manufacture of some turbine components.

36 MATERIALS SCIENCE↗

User Guide for the International Jobs and Economic Development Impacts Model

The International Jobs and Economic Development Impacts (I-JEDI) model is a freely available economic model that estimates gross economic impacts from wind, solar, and geothermal energy projects for several different countries. Building on the original JEDI model, which was developed for the United States, I-JEDI was developed under the USAID Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support countries in assessing economic impacts of LEDS actions in the energy sector. I-JEDI estimates economic impacts by characterizing the construction and operation of energy projects in terms of expenditures and the portion of these expenditures made within the country of analysis. These data are then used in a country-specific input-output (I-O) model to estimate employment, earnings, gross domestic product (GDP), and gross output impacts. Total economic impacts are presented as well as impacts by industry. This user guide presents general information about how to use I-JEDI and interpret results as well as detailed information about methodology and model limitations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Guia del Usuario para el Modelo Internacional de Impacto en Trabajos y Desarrollo Economico

This is a Spanish translation of 'User Guide for the International Jobs and Economic Development Impacts Model.' The International Jobs and Economic Development Impacts (I-JEDI) model is a freely available economic model that estimates gross economic impacts from wind, solar, and geothermal energy projects for several different countries. Building on the original JEDI model, which was developed for the United States, I-JEDI was developed under the USAID Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support countries in assessing economic impacts of LEDS actions in the energy sector. I-JEDI estimates economic impacts by characterizing the construction and operation of energy projects in terms of expenditures and the portion of these expenditures made within the country of analysis. These data are then used in a country-specific input-output (I-O) model to estimate employment, earnings, gross domestic product (GDP), and gross output impacts. Total economic impacts are presented as well as impacts by industry. This user guide presents general information about how to use I-JEDI and interpret results as well as detailed information about methodology and model limitations.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Dosimeter Area Monitoring Program (DAMP) Technical Basis Document

This document provides a technical basis for establishing a Dosimetry-based Area Monitoring Program (DAMP) at Lawrence Livermore National Laboratory (LLNL). A DAMP is part of a comprehensive routine monitoring program and provides information about radiation levels inside and outside of Radiologically-Controlled Areas (RCAs). The routine, hand-held radiation survey program driven by the Health Physics Discipline Action Plan (HP-DAP) helps to ensure radiological conditions within RCAs are well-characterized and routinely monitored; however, such surveys are a snapshot in time, whereas area monitoring dosimeters (AMDs) continuously monitor radiation doses in the areas where they are installed. Together, data from the hand-held radiation surveys and the DAMP provides a comprehensive picture of radiation environment at LLNL. A DAMP helps to verify the effectiveness of established engineered and administrative controls while documenting that radiation doses in RCAs are below that which requires individual monitoring. This document establishes the basis for determining which model of dosimeter to use, the exchange frequency, the occupancy factor, monitoring locations, and a method for evaluating AMD results.

61 RADIATION PROTECTION AND DOSIMETRY↗

Continuous Fiber Bath Treatments at Pilot Scale: A Novel Testbed System

The technical demands on high performance textiles continues to expand, and the research community has answered the call with innovative fiber bath treatments for enhanced properties and sizings for improved composites. However, little translation to greater scale has been demonstrated. To fill this gap, a novel, multifunctional system has been developed to explore polymer fiber treatment methods, the deployment of nanoadditive coatings and other sizings, and smart processing methods at the pilot scale. Continuous tows of fibers can be passed through a temperature-controlled, crossflow bath with an immersion residence time exceeding 2 hours. The modular system is resistant to corrosive solutions, includes additional inline stations for washing and drying after processing, is equipped with a bevy of sensors, pumps, and valves monitored and controlled by a LabView program, and can be fully contained in a standard lab fume hood. This new testbed system, when coupled with high fidelity materials characterization methods, will enable rapid evaluation of new fiber treatment methods at pilot-scale.

36 MATERIALS SCIENCE↗

Be 2 C synthesis, properties, and ion-beam irradiation damage characterization

This technical report is in submission of completion of the Level 2 milestone number M2AT 23OR1101022, titled “Be 2 C synthesis, properties, and ion-beam irradiation damage characterization,” for the AT-23OR110102 “Beryllium Carbide as moderator for MSRs—ORNL” WBS number 2.04.11.01 within the larger Advanced Reactor Technologies program at Oak Ridge National Laboratory. This effort is an initial study of the viability of Be 2 C as a future neutron moderator for molten salt reactors and other high-temperature reactors. The research was awarded funding in September 2022, and this Level 2 milestone presents the work that completed by the end of July 2023. This work is a collaboration between Oak Ridge National Laboratory and the University of Michigan. This report discusses the status of this effort and planned work before the final reporting.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fuel from wastewater : harnessing a potential energy source in Canada through the co-location of algae biofuel production to sources of effluent, heat and CO2.

Sandia National Laboratories is collaborating with the National Research Council (NRC) Canada and the National Renewable Energy Laboratory (NREL) to develop a decision-support model that will evaluate the tradeoffs associated with high-latitude algae biofuel production co-located with wastewater, CO2, and waste heat. This project helps Canada meet its goal of diversifying fuel sources with algae-based biofuels. The biofuel production will provide a wide range of benefits including wastewater treatment, CO2 reuse and reduction of demand for fossil-based fuels. The higher energy density in algae-based fuels gives them an advantage over crop-based biofuels as the 'production' footprint required is much less, resulting in less water consumed and little, if any conversion of agricultural land from food to fuel production. Besides being a potential source for liquid fuel, algae have the potential to be used to generate electricity through the burning of dried biomass, or anaerobically digested to generate methane for electricity production. Co-locating algae production with waste streams may be crucial for making algae an economically valuable fuel source, and will certainly improve its overall ecological sustainability. The modeling process will address these questions, and others that are important to the use of water for energy production: What are the locations where all resources are co-located, and what volumes of algal biomass and oil can be produced there? In locations where co-location does not occur, what resources should be transported, and how far, while maintaining economic viability? This work is being funded through the U.S. Department of Energy (DOE) Biomass Program Office of Energy Efficiency and Renewable Energy, and is part of a larger collaborative effort that includes sampling, strain isolation, strain characterization and cultivation being performed by the NREL and Canada's NRC. Results from the NREL / NRC collaboration including specific productivities of selected algal strains will eventually be incorporated into this model.

03 NATURAL GAS↗