Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADAR method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

C-SIDE: The control-structure interaction demonstration experiment

The Control-Structure Interaction Demonstration Experiment (C-SIDE) is sponsored by the Electro-Optics and Cryogenics Division of Ball Aerospace Systems Group. Our objective is to demonstrate methods of solution to structure control problems utilizing currently available hardware in a system that is an extension of our corporate experience. The larger space structures with which Ball has been associated are the SEASAT radar antenna, Shuttle Imaging Radar (SIR) -A, -B and -C antennas and the Radarsat spacecraft. The motivation for the C-SIDE configuration is to show that integration of active figure control in the radar's system-level design can relieve antenna mechanical design constraints. This presentation is primarily an introduction to the C-SIDE testbed. Its physical and functional layouts, and major components are described. The sensor is of special interest as it enables direct surface figure measurements from a remote location. The Remote Attitude Measurement System (RAMS) makes high-rate, unobtrusive measurements of many locations, several of which may be collocated easily with actuators. The control processor is a 386/25 executing a reduced order model-based algorithm with provision for residual mode filters to compensate for structure interaction. The actuators for the ground demonstration are non-contacting, linear force devices. Results presented illustrate some basic characteristics of control-structure interaction with this hardware. The testbed will be used for evaluation of current technologies and for research in several areas. A brief indication of the evolution of the C-SIDE is given at the conclusion.

Mohl, James B.↗
NASA NTRS2006

Development of Bonded Joint Technology for a Rigidizable-Inflatable Deployable Truss

Microwave and Synthetic Aperture Radar antenna systems have been developed as instrument systems using truss structures as their primary support and deployment mechanism for over a decade. NASA Langley Research Center has been investigating fabrication, modular assembly, and deployment methods of lightweight rigidizable/inflatable linear truss structures during that time for large spacecraft systems. The primary goal of the research at Langley Research Center is to advance these existing state-of-the-art joining and deployment concepts to achieve prototype system performance in a relevant space environment. During 2005, the development, fabrication, and testing of a 6.7 meter multi-bay, deployable linear truss was conducted at Langley Research Center to demonstrate functional and precision metrics of a rigidizable/inflatable truss structure. The present paper is intended to summarize aspects of bonded joint technology developed for the 6.7 meter deployable linear truss structure while providing a brief overview of the entire truss fabrication, assembly, and deployment methodology. A description of the basic joint design, surface preparation investigations, and experimental joint testing of component joint test articles will be described. Specifically, the performance of two room temperature adhesives were investigated to obtain qualitative data related to tube folding testing and quantitative data related to tensile shear strength testing. It was determined from the testing that a polyurethane-based adhesive best met the rigidizable/inflatable truss project requirements.

Smeltzer, Stanley S., III↗
NASA NTRS2017

Management by Trajectory Trade Study of Roles and Responsibilities Between Participants and Automation Report

This report describes a trade study of roles and responsibilities associated with the Management by Trajectory (MBT) concept. The MBT concept describes roles, responsibilities, and information and automation requirements for providing air traffic controllers and managers the ability to quickly generate, evaluate and implement changes to an aircraft's trajectory. In addition, the MBT concept describes mechanisms for imposing constraints on flight operator preferred trajectories only to the extent necessary to maintain safe and efficient traffic flows, and the concept provides a method for the exchange of trajectory information between ground automation systems and the aircraft that allows for trajectory synchronization and trajectory negotiation. The participant roles considered in this trade study include: airline dispatcher, flight crew, radar controller, traffic manager, and Air Traffic Control System Command Center (ATCSCC) traffic management specialists. The proposed allocation of roles and responsibilities was based on analysis of several use cases that were developed for this purpose as well as for walking through concept elements. The resulting allocation of roles and responsibilities reflects both increased automation capability to support many aviation functions, as well as increased flexibility to assign responsibilities to different participants - in many cases afforded by the increased automation capabilities. Note that the selection of participants to consider for allocation of each function is necessarily rooted in the current environment, in that MBT is envisioned as an evolution of the National Airspace System (NAS), and not a revolution. A key feature of the MBT allocations is a vision for the traffic management specialist to take on a greater role. This is facilitated by the vision that separation management functions, in addition to traffic management functions, will be carried out as trajectory management functions. This creates an opportunity for flexibility, allowing the traffic management specialist to carry out tasks that today can only be carried out by the controller currently in contact with the aircraft. This additional tasking for the traffic management specialist comes with requirements for workload management. An increased role for the Data-side (D-side) controller relative to the Radar-side (R-side) controller is a potential approach to mitigating workload for the traffic management specialist, as the D-side controller would have similar ability to perform separation management functions in what today might be considered the "trajectory management" timeframe. This analysis did not distinguish between the D-side and R-side controllers since in many cases the R-side controller works unassisted.

Fernandes, Alicia D.↗
DOE OSTI2019

On the Design of Sinuous Antennas for UWB Radar Applications

We present that sinuous antennas are capable of producing ultra-wideband radiation with polarization diversity. This capability makes the sinuous antenna an attractive candidate for UWB polarimetric radar applications. Additionally, the ability of the sinuous antenna to be implemented as a planar structure makes it a good fit for close in sensing applications such as ground penetrating radar. However, recent literature has shown the sinuous antenna to suffer from resonances which degrade performance. Such resonances produce late time ringing which is particularly troubling for pulsed close in sensing applications. The resonances occur in two forms: log-periodic resonances on the arms, and a resonance due to the sharp ends left by the outer truncation. A detailed investigation as to the correlation between the log-periodic resonances and the sinuous antenna design parameters indicates the resonances may be mitigated by selecting appropriate design parameters. Additionally, a novel truncation method is proposed to remove the sharp end resonance. Both simulation and measured results are provided to support the developed sinuous antenna design guidance.

42 ENGINEERING↗
NASA NTRS1983

Slope-induced errors in radar altimetry over continental ice sheets

Altimeter measurements of ranges to modelled irregular surfaces are simulated and two correction schemes are used to reconstruct the modelled surfaces from the simulated data. When the cross-track slope is negligible, the problem can be treated as two-dimensional and the relocation method is preferred to the slope correction method. In a two-dimensional test case, 85 percent of the slope-induced rms error was removed by the relocation method. The mean error along profiles of about 75 km or longer is usually reduced more than the rms error. An alternative slope correction scheme, which uses the local slope to calculate the expected error, is less effective in the two-dimensional case. Over a simulated three-dimensional surface, where groundtracks are widely spaced and cross-track slopes are significant, the slope-correction method must be used in at least the cross-track direction.

Brenner, A. C.↗
DOE OSTI2023

Optimal Traffic Signal Control Using Priority Metric Based on Real-Time Measured Traffic Information

Optimizing traffic control systems at traffic intersections can reduce network-wide fuel consumption as well as improve traffic flow. While traffic signals have conventionally been controlled based on predetermined schedules, various adaptive control systems have been developed recently using advanced sensors such as cameras, radars, and LiDARs. By utilizing rich traffic information enabled by the advanced sensors, more efficient or optimal traffic signal control is possible in response to varying traffic conditions. This paper proposes an optimal traffic signal control method to minimize network-wide fuel consumption utilizing real-time traffic information provided by advanced sensors. This new method employs a priority metric calculated by a weighted sum of various factors, including the total number of vehicles, total vehicle speed, vehicle waiting time, and road preference. Genetic Algorithm (GA) is used as a global optimization method to determine the optimal weights in the priority metric. In order to evaluate the effectiveness of the proposed method, a traffic simulation model is developed in a high-fidelity traffic simulation environment called SUMO, based on a real-world traffic network. The traffic flow within this model is simulated using actual measured traffic data from the traffic network, enabling a comprehensive assessment of the novel optimal traffic signal control method in realistic conditions. The simulation results show that the proposed priority metric-based real-time traffic signal control algorithm can significantly reduce network-wide fuel consumption compared to the conventional fixed-time control and coordinated actuated control methods that are currently used in the modeled network. Additionally, incorporating truck priority in the priority metric leads to further improvements in fuel consumption reduction.

47 OTHER INSTRUMENTATION↗
NASA NTRS1975

Experimental results of a continuous wave laser radar system

A 1.06 micron CW laser radar system was used to establish the feasibility of remotely measuring sea surface wind magnitude and direction. Simultaneous correlation of collected laser data with the environment was established by using meteorological instruments. The experimental system and methods of analysis are summarized. Results of the experiments, including wind magnitude and direction correlation, are reported. Results are compared with theoretical predictions.

Petri, K. J.↗
NASA NTRS1977

Meteorological radar facility (MRF) slot conductance investigations

A preliminary meteorological radar facility (MRF) array design was completed in support of the slot conductance measurement program. Three different slot measurement techniques were evaluated. The selection of the probe comparison measurement technique was selected as the principal experimental method with the impedance measurement technique chosen to measure a few higher conductance slots to be used as reference slots. The impedance of 43 slots in 0.9 x 0.4 inch standard waveguide and of 40 slots in 0.835 x 0.4 inch waveguide was measured. Also, impedance measurements were made of a few slots using image planes to simulate mutual coupling effects. The measured and theoretical conductance, susceptance, and radiation phase data are presented in graphic form as a function of slot displacement for constant slot length, and of slot length for constant slot displacement. It is concluded that the proposed MRF array design approach is a feasible one.

Ratkevich, A. E.↗
NASA NTRS1985

Contribution of explosion and future collision fragments to the orbital debris environment

The time evolution of the near-earth man-made orbital debris environment modeled by numerical simulation is presented in this paper. The model starts with a data base of orbital debris objects which are tracked by the NORAD ground radar system. The current untrackable small objects are assumed to result from explosions and are predicted from data collected from a ground explosion experiment. Future collisions between earth orbiting objects are handled by the Monte Carlo method to simulate the range of collision possibilities that may occur in the real world. The collision fragmentation process between debris objects is calculated using an empirical formula derived from a laboratory spacecraft impact experiment to obtain the number versus size distribution of the newly generated debris population. The evolution of the future space debris environment is compared with the natural meteoroid background for the relative spacecraft penetration hazard.

Su, S.-Y.↗
NASA NTRS1992

Spectrum Modal Analysis for the Detection of Low-Altitude Windshear with Airborne Doppler Radar

A major obstacle in the estimation of windspeed patterns associated with low-altitude windshear with an airborne pulsed Doppler radar system is the presence of strong levels of ground clutter which can strongly bias a windspeed estimate. Typical solutions attempt to remove the clutter energy from the return through clutter rejection filtering. Proposed is a method whereby both the weather and clutter modes present in a return spectrum can be identified to yield an unbiased estimate of the weather mode without the need for clutter rejection filtering. An attempt will be made to show that modeling through a second order extended Prony approach is sufficient for the identification of the weather mode. A pattern recognition approach to windspeed estimation from the identified modes is derived and applied to both simulated and actual flight data. Comparisons between windspeed estimates derived from modal analysis and the pulse-pair estimator are included as well as associated hazard factors. Also included is a computationally attractive method for estimating windspeeds directly from the coefficients of a second-order autoregressive model. Extensions and recommendations for further study are included.

Kunkel, Matthew W.↗
NASA NTRS2004

On Study of Air/Space-borne Dual-Wavelength Radar for Estimates of Rain Profiles

In this study, a framework is discussed to apply air/space-borne dual-wavelength radar for the estimation of characteristic parameters of hydrometeors. The focus of our study is on the Global Precipitation Measurements (GPM) precipitation radar, a dual-wavelength radar that operates at Ku (13.8 GHz) and Ka (35 GHz) bands. As the droplet size distributions (DSD) of rain are expressed as the Gamma function, a procedure is described to derive the median volume diameter (D(sub 0)) and particle number concentration (N(sub T)) of rain. The correspondences of an important quantity of dual-wavelength radar, defined as deferential frequency ratio (DFR), to the D(sub 0) in the melting region are given as a function of the distance from the 0 C isotherm. A self-consistent iterative algorithm that shows a promising to account for rain attenuation of radar and infer the DSD without use of surface reference technique (SRT) is examined by applying it to the apparent radar reflectivity profiles simulated from the DSD model and then comparing the estimates with the model (true) results. For light to moderate rain the self-consistent rain profiling approach converges to unique and correct solutions only if the same shape factors of Gamma functions are used both to generate and retrieve the rain profiles, but does not converges to the true solutions if the DSD form is not chosen correctly. To further examine the dual-wavelength techniques, the self-consistent algorithm, along with forward and backward rain profiling algorithms, is then applied to the measurements taken from the 2nd generation Precipitation Radar (PR-2) built by Jet Propulsion Laboratory. It is found that rain profiles estimated from the forward and backward approaches are not sensitive to shape factor of DSD Gamma distribution, but the self-consistent method is.

Liao, Liang↗
DOE OSTI2021

Modeling Buried Object Brightness and Visibility for Ground Penetrating Radar

Comparing the observed brightness of various buried objects is a straightforward way to characterize the performance of a ground penetrating radar (GPR) system. However, a limitation arises. A simple comparison of buried object brightness values does not disentangle the effects of the GPR system itself from the system's operating environment and the objects being observed. Therefore, with brightness values exhibiting an unknown synthesis of systemic, environmental, and object factors, GPR system analysis becomes a convoluted affair. In this work, we use an experimentally collected dataset of over 25,000 object observations from five different multistatic radar arrays to develop models of buried object brightness and control for these various effects. Additionally, our modeling efforts provide a means for quantifying the relative brightness of GPR systems, the objects they detect, and the physical properties of those objects that influence observed brightness. To evaluate the models' performance on new object observations, we repeatedly simulate fitting them to half the dataset and predicting the observed brightness values of the unseen half. In addition, we introduce a method for estimating the probability that individual observations constitute a visible object, which aids in failure analysis, performance characterization, and dataset cleaning.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Inverse problems-based maximum likelihood estimation of ground reflectivity for selected regions of interest from stripmap SAR data [Regularized maximum likelihood estimation of ground reflectivity from stripmap SAR data]

In this study, we derive a comprehensive forward model for the data collected by stripmap synthetic aperture radar (SAR) that is linear in the ground reflectivity parameters. It is also shown that if the noise model is additive, then the forward model fits into the linear statistical model framework, and the ground reflectivity parameters can be estimated by statistical methods. We derive the maximum likelihood (ML) estimates for the ground reflectivity parameters in the case of additive white Gaussian noise. Furthermore, we show that obtaining the ML estimates of the ground reflectivity requires two steps. The first step amounts to a cross-correlation of the data with a model of the data acquisition parameters, and it is shown that this step has essentially the same processing as the so-called convolution back-projection algorithm. The second step is a complete system inversion that is capable of mitigating the sidelobes of the spatially variant impulse responses remaining after the correlation processing. We also state the Cramer-Rao lower bound (CRLB) for the ML ground reflectivity estimates.We show that the CRLB is linked to the SAR system parameters, the flight path of the SAR sensor, and the image reconstruction grid.We demonstrate the ML image formation and the CRLB bound for synthetically generated data.

47 OTHER INSTRUMENTATION↗
NASA NTRS1999

A TRMM Rainfall Estimation Method Applicable to Land Areas

Methods developed to estimate rain rate on a footprint scale over land with the satellite-borne multispectral dual-polarization Special Sensor Microwave Imager (SSM/1) radiometer have met with limited success. Variability of surface emissivity on land and beam filling are commonly cited as the weaknesses of these methods. On the contrary, we contend a more significant reason for this lack of success is that the information content of spectral and polarization measurements of the SSM/I is limited. because of significant redundancy. As a result, the complex nature and vertical distribution C, of frozen and melting ice particles of different densities, sizes, and shapes cannot resolved satisfactorily. Extinction in the microwave region due to these complex particles can mask the extinction due to rain drops. Because of these reasons, theoretical models that attempt to retrieve rain rate do not succeed on a footprint scale. To illustrate the weakness of these models, as an example we can consider the brightness temperature measurement made by the radiometer in the 85 GHz channel (T85). Models indicate that T85 should be inversely related to the rain rate, because of scattering. However, rain rate derived from 15-minute rain gauges on land indicate that this is not true in a majority of footprints. This is also supported by the ship-borne radar observations of rain in the Tropical Oceans and Global Atmosphere Coupled Ocean-Atmosphere Response Experiment (TOGA-COARE) region over the ocean. Based on these observations. we infer that theoretical models that attempt to retrieve rain rate do not succeed on a footprint scale. We do not follow the above path of rain retrieval on a footprint scale. Instead, we depend on the limited ability of the microwave radiometer to detect the presence of rain. This capability is useful to determine the rain area in a mesoscale region. We find in a given rain event that this rain area is closely related to the mesoscale-average rain rate. Based on this observation, in this study we have developed a method to estimate the mesoscale-average rain rate over land utilizing microwave radiometer data. Because of the high degree of geographic and seasonal variability in the nature and intensity of rain, this method requires some tuning with 15-minute rain gauge data on land. After tuning the method, it can be applied to an independent set of rain events that are close in time and space. We find that the mesoscale rain rates retrieved over the period of a month on land with this method shows a correlation of about 0.85 with respect to the surface rain-gauge observations. This mesoscale-average rain rate estimation method can be useful to extend the spatial and temporal coverage of the rainfall data provided by the Precipitation Radar on board the Tropical Rainfall Measuring Mission (TRMM) satellite.

Prabhakara, C.↗
DOE OSTI2021

Raindrop Size Spectrum in Deep Convective Regions of the Americas

This study compared drop size distribution (DSD) measurements on the surfaces, the corresponding properties, and the precipitation modes among three deep convective regions within the Americas. The measurement compilation corresponded to two sites in the midlatitudes: the U.S. Southern Great Plains and Córdoba Province in subtropical South America, as well as to one site in the tropics: Manacapuru in central Amazonia; these are all areas where intense rain-producing systems contribute to the majority of rainfall in the Americas’ largest river basins. This compilation included two types of disdrometers (Parsivel and 2D-Video Disdrometer) that were used at the midlatitude sites and one type of disdrometer (Parsivel) that was deployed at the tropical site. The distributions of physical parameters (such as rain rate R, mass-weighted mean diameter D m , and normalized droplet concentration N w ) for the raindrop spectra without rainfall mode classification seemed similar, except for the much broader N w distributions in Córdoba. The raindrop spectra were then classified into a light precipitation mode and a precipitation mode by using a cutoff at 0.5 mm h -1 based on previous studies that characterized the full drop size spectra. These segregated rain modes are potentially unique relative to previously studied terrain-influenced sites. In the light precipitation and precipitation modes, the dominant higher frequency observed in a broad distribution of N w in both types of disdrometers and the identification of shallow light precipitation in vertically pointing cloud radar data represent unique characteristics of the Córdoba site relative to the others. As a result, the co-variability between the physical parameters of the DSD indicates that the precipitation observed in Córdoba may confound existing methods of determining the rain type by using the drop size distribution.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1980

Feasibility and cost study on VOIR SAR data transfer via a bent pipe link

An INTELSAT/DOMSAT double hop bent pipe link for the Venus orbiting imaging radar synthetic aperture radar imaging data transfer from deep space stations 43 and 63 to the Jet Propulsion Laboratory was investigated. The cost for the bent pipe transfer was estimated and compared to that for the planned tape record/airfreight-the-tape transfer method.

Park, Y. H.↗
NASA NTRS1982

Errors in fixed and moving frame of references - Applications for conventional and Doppler radar analysis

Techniques for the correction of errors in Doppler radar scans due to advection effects are presented. A moving frame of reference is shown to be useful in least-squares estimates with stationary observations expressed in scalars or Cartesian coordinates. For non-Cartesian coordinates, such as the deduction of radial velocities from triple Doppler radar data, an integral is defined for accounting for advection effects and consequent coordinate transformations. The multiple radars are necessary for unambiguous characterization of the horizontal wind velocity. A scale analysis is employed to estimate errors with and without the error correction procedure. Improvements in correlations between scans are demonstrated when the error correction method is used.

Tzvi, G.-C.↗
NASA NTRS1990

Relationship of radar cross section to the geometric size of orbital debris

An accurate determination of the sizes of orbiting debris objects is essential to predicting collision rates, atmospheric decay rates, and fragmentation laws for orbiting objects. The radar cross section (RCS) is the most common means of estimating the size of orbiting objects. However, the RCS is prone to error due to Mie scattering, compositional effects, geometrical effects, tumbling, and other dependencies. Optical measurement methods are theoretically much more accurate, but necessitate estimates of the object's albedo. This paper examines the relationship of RCS and optical cross section to physical size and albedo, and presents rules useful for quantizing the physical size of space objects.

Badhwar, Gautam D.↗