Search NASA⌕ Search

SEARCH · Search NASA

Results for “ReACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Tracking Sodium-Antimonide Phase Transformations in Sodium-Ion Anodes: Insights from Operando Pair Distribution Function Analysis and Solid-State NMR Spectroscopy

Operando pair distribution function (PDF) analysis and ex situ Na-23 magic-angle spinning solid-state nuclear magnetic resonance (MAS ssNMR) spectroscopy are used to gain insight into the alloying mechanism of high-capacity antimony anodes for sodium-ion batteries. Subtraction of the PDF of crystalline NaxSb phases from the total PDF, an approach constrained by chemical phase information gained from Na-23 ssNMR in reference to relevant model compounds, identifies two previously uncharacterized intermediate species formed electro-chemically; a-Na3-xSb (x approximate to 0.4-0.5), a structure locally similar to crystalline Na3Sb (c-Na3Sb) but with significant numbers of sodium vacancies and a limited correlation length, and a-Na1.7Sb, a highly amorphous structure featuring some Sb-Sb bonding. The first sodiation breaks down the crystalline antimony to form first a-Na3-xSb and, finally, crystalline Na3Sb. Desodiation results in the formation of an electrode formed of a composite of crystalline and amorphous antimony networks. We link the different reactivity of these networks to a series of sequential sodiation reactions manifesting as a cascade of processes observed in the electrochemical profile of subsequent cycles. The amorphofis network reacts at higher voltages reforming a-Na1.7Sb, then a-Na3-xSb, whereas lower potentials are required for the sodiation of crystalline antimony, which reacts to form a-Na3-xSb without the formation of a-Na3-xSb. a-Na3-xSb is converted to crystalline Na3Sb at the end of the second discharge. We find no evidence of formation of NaSb. Variable temperature Na-23 NMR experiments reveal significant sodium mobility within c-Na3Sb; this is a possible contributing factor to the excellent rate performance of Sb anodes.

Allan, Phoebe K.↗

Probing the Surface Chemistry of Lithium Nitridation

Chemical synthesis of Li 3 N through lithium nitridation has potential to advance rechargeable battery and nitrogen fixation technology. However, studies of the conditions for forming Li 3 N on the lithium surface via nitrogen gas exposure report contradictory findings, such as the spontaneous reaction of Li with pure N 2 , the impossibility of forming Li 3 N through pure Li and N 2 interaction, the requirement of trace H 2 O to catalyze the reaction, and evidence to the contrary. In this study, ambient pressure X-ray photoelectron spectroscopy (APXPS) was applied to evaluate the in situ chemical evolution of the lithium metal surface under nitrogen gas up to 800 mTorr. At pressures ≤10 mTorr, no Li 3 N was detected. At higher pressures, surface Li 3 N rapidly reacts with trace CO 2 . Additionally, because metallic lithium is readily oxidized by trace gases, the atomic nitrogen concentration of the lithium surface remains below 2%. When nitridation follows oxidation by O 2 gas, CO 2 gas, or H 2 O vapor, surface Li 3 N formation is inhibited. These results suggest that nitrogen gas can diffuse through the oxidized lithium metal surface to react with subsurface metallic lithium.

Binding energy↗

Triphosphine-Ligated Copper Hydrides for CO 2 Hydrogenation: Structure, Reactivity, and Thermodynamic Studies

The copper(I) triphosphine complex LCu(MeCN)PF 6 (L = 1,1,1-tris(diphenylphosphinomethyl)ethane), which we recently demonstrated is an active catalyst precursor for hydrogenation of CO 2 to formate, reacts with H 2 in the presence of a base to form a cationic dicopper hydride, [(LCu) 2 H]PF 6 . [(LCu) 2 H] + is also an active precursor for catalytic CO 2 hydrogenation, with equivalent activity to that of LCu(MeCN) + , and therefore may be a relevant catalytic intermediate. In this study, the thermodynamic hydricity of [(LCu) 2 H] + was determined to be 41.0 kcal/mol by measuring the equilibrium constant for this reaction using three different bases. [(LCu) 2 H] + and the previously reported dimer (LCuH) 2 can be synthesized by the reaction of LCu(MeCN) + with 0.5 and 1 equiv of KB(O i Pr) 3 H, respectively. The solid-state structure of [(LCu) 2 H] + shows threefold symmetry about a linear Cu–H–Cu axis and significant steric strain imposed by bringing two LCu + units together around the small hydride ligand. [(LCu) 2 H] + reacts stoichiometrically with CO 2 to generate the formate complex LCuO 2 CH and the solvento complex LCu(MeCN) + . The rate of the stoichiometric reaction between [(LCu) 2 H] + and CO 2 is dramatically increased in the presence of bases that coordinate strongly to the copper center, e.g. DBU and TMG. In the absence of CO 2 , the addition of a large excess of DBU to [(LCu) 2 H] + results in an equilibrium that forms LCu(DBU) + and also presumably the mononuclear hydride LCuH, which is not directly observed. Due to the significantly enhanced CO 2 reactivity of [(LCu) 2 H] + under these catalytically relevant conditions, LCuH is proposed to be the catalytically active metal hydride.ted by the US Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Layer-by-Layer Molecular Assemblies for Dye-Sensitized Photoelectrosynthesis Cells Prepared by Atomic Layer Deposition

In a Dye Sensitized Photoelectrosynthesis Cell (DSPEC) the relative orientation of catalyst and chromophore play important roles. Here we introduce a new, robust, Atomic Layer Deposition (ALD) procedure for the preparation of assemblies on wide bandgap semiconductors. In the procedure, phosphonated metal complex precursors react with metal ion bridging to an external chromophore or catalyst to give assemblies bridged by Al(III), Sn(IV), Ti(IV), or Zr(IV) metal oxide units as bridges. The procedure has been extended to chromophore-catalyst assemblies for water oxidation catalysis. A SnO2 bridged assembly on SnO2/TiO2 core/shell electrodes undergoes water splitting with an incident photon conversion efficiency (IPCE) of 17.1% at 440 nm. Reduction of water at a Ni(II)-based catalyst on NiO films has been shown to give H2. Compared to conventional solution-based procedures, the ALD approach offers significant advantages in scope and flexibility for the preparation of stable surface structures.

DSPEC, core/shell, Atomic Layer Deposition, self-a↗

Catalytic Silylation of N 2 and Synthesis of NH 3 and N 2 H 4 by Net Hydrogen Atom Transfer Reactions Using a Chromium P 4 Macrocycle

We report the first discrete molecular Cr-based catalysts for the reduction of N2. This study is focused on the reactivity of the Cr-N2 complex, trans-[Cr(N2)2(PPh4NBn4)] P4Cr(N2)2, bearing a 16-membered tetraphosphine macrocycle. The architecture of the [16]-PPh4NBn4 ligand is critical to preserve the structural integrity of the catalyst. P4Cr(N2)2 was found to mediate the reduction of N2 by three complementary reaction pathways: (1) Cr-catalyzed reduction of N2 to N(SiMe3)3 by Na and Me3SiCl affording up to 34 equiv N(SiMe3)3; (2) stoichiometric reduction of N2 by protons and electrons. For example, the reaction of cobaltocene (CoCp2) and collidinium triflate (ColH[OTf]) at room temperature to afforded 1.9 equiv of NH3, or at -78 °C to afforded a mixture of NH3 and N2H4; (3) the first example of NH3 formation from the reaction of a terminally bound N2 ligand with a traditional H atom source, TEMPOH, (2,2,6,6-tetramethylpiperidine-1-ol). We found that trans-[Cr(15N2)2(PPh4NBn4)] reacts with excess TEMPOH to afford a 1.4 equiv of 15NH3.

Kendall, Alexander J.↗

Theoretical Study of C-H Bond Cleavage via Concerted Proton-Coupled Electron Transfer in Fluorenyl-Benzoates

Developing new strategies to activate and cleave C-H bonds is important for a broad range of applications. Recently a new approach for C-H bond activation using multi-site concerted proton-coupled electron transfer (PCET) involving intermolecular electron transfer to an oxidant coupled to intramolecular proton transfer was reported. For a series of oxidants reacting with 2-(9H-fluoren-9-yl)benzoate, experimental studies revealed an atypical Brønsted a, defined as the slope of the logarithm of the PCET rate constant versus the logarithm of the equilibrium constant or the scaled driving force. Herein this reaction is modeled with a vibronically nonadiabatic PCET theory. Hydrogen tunneling, thermal sampling of the proton donor-acceptor mode, solute and solvent reorganization, and contributions from excited vibronic states are found to play important roles. The calculations qualitatively reproduce the experimental observation of a Brønsted a significantly less than 0.5 and explain this shallow slope in terms of exoergic processes between pairs of electron-proton vibronic states. These fundamental mechanistic insights may guide the design of more effective strategies for C-H bond activation and cleavage.

Sayfutyarova, Elvira R.↗

Ethylene Glycol Adsorption and Reaction over CeOX(111) Thin Films

This study reports the interaction of ethylene glycol with well-ordered CeO{sub x}(111) thin film surfaces. Ethylene glycol initially adsorbs on fully oxidized CeO{sub 2}(111) and reduced CeO{sub 2-x}(111) through the formation of one C-O-Ce bond and then forms a second alkoxy bond after annealing. On fully oxidized CeO{sub 2}(111) both recombination of ethylene glycol and water desorption occur at low temperature leaving stable -OCH{sub 2}CH{sub 2}O- (ethylenedioxy) intermediates and oxygen vacancies on the surface. This ethylenedioxy intermediate goes through C-C bond scission to produce formate species which then react to produce CO and CO{sub 2}. The formation of water results in the reduction of the ceria. On a reduced CeO{sub 2-x}(111) surface the reaction selectivity shifts toward a dehydration process. The ethylenedioxy intermediate decomposes by breaking a C-O bond and converts into an enolate species. Similar to the reaction of acetaldehyde on reduced CeO{sub 2-x}(111), the enolate reacts to produce acetaldehyde, acetylene, and ethylene. The loss of O from ethylene glycol leads to a small amount of oxidation of the reduced ceria.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physical Properties and CO2 Reaction Pathway of 1-Ethyl-3-Methylimidazolium Ionic Liquids with Aprotic Heterocyclic Anions

Ionic liquids (ILs) with aprotic heterocyclic anions (AHA) are attractive candidates for CO2 capture technologies. In this study, a series of AHA ILs with 1-ethyl-3-methylimidazolium ([emim](+)) cations were synthesized, and their physical properties (density, viscosity, and ionic conductivity) were measured. In addition, CO2 solubility in each IL was determined at room temperature using a volumetric method at pressures between 0 and 1 bar. The AHAs are basic anions that are capable of reacting stoichiometrically with CO2 to form carbamate species. An interesting CO2 uptake isotherm behavior was observed, and this may be attributed to a parallel, equilibrium proton exchange process between the imidazolium cation and the basic AHA in the presence of CO2, followed by the formation of "transient" carbene species that react rapidly with CO2. The presence of the imidazolium-carboxylate species and carbamate anion species was verified using H-1 and C-13 NMR spectroscopy. While the reaction between CO2 and the proposed transient carbene resulted in cation-CO2 binding that is stronger than the anion-CO2 reaction, the reactions of the imidazolium AHA ILs were fully reversible upon regeneration at 80 degrees C with nitrogen purging. The presence of water decreased the CO2 uptake due to the inhibiting effect of the neutral species (protonated form of AHA) that is formed.

Seo, S↗

Probing Surface-Adlayer Conjugation on Organic-Modified Si(111) Surfaces with Microscopy, Scattering, Spectroscopy, and Density Functional Theory

Highly conjugated molecules bound to silicon are promising candidates for organosilicon electronic devices and sensors. In this study, 1-bromo-4-ethynylbenzene was synthesized and reacted with a hydrogen-passivated Si(111) surface via ultraviolet irradiation. Through an array of characterization and modeling tools, the binding configuration and morphology of the reacted molecule were thoroughly analyzed. Atomic force microscopy confirmed an atomically flat surface morphology following reaction, while X-ray photoelectron spectroscopy verified reaction to the surface via the terminal alkyne moiety. In addition, synchrotron X-ray characterization, including X-ray reflectivity, X-ray fluorescence, and X-ray standing wave measurements, enabled sub-angstrom determination of the position of the bromine atom with respect to the silicon lattice. This structural characterization was quantitatively compared with density functional theory (DFT) calculations, thus enabling the {pi}-conjugation of the terminal carbon atoms to be deduced. The X-ray and DFT results were additionally corroborated with the vibrational spectrum of the organic adlayer, which was measured with sum frequency generation. Overall, these results illustrate that the terminal carbon atoms in 1-bromo-4-ethynylbenzene adlayers on Si(111) retain {pi}-conjugation, thus revealing alkyne molecules as promising candidates for organosilicon electronics and sensing.

43 PARTICLE ACCELERATORS↗

Reactivity of C2Cl6 and C2Cl4 multilayers with Fe0 atoms over FeO(111)

The interaction of Fe0 atoms with C2Cl6 multilayers over FeO(111) has been investigated using the “atom dropping” preparation technique and a combination of temperature programmed desorption, Auger electron spectroscopy, and x-ray photoelectron spectroscopy. The reactivity and reaction products are strongly dependent on the Fe0 coverage. Submonolayer Fe0 doses lead to high reactivity and primarily FeCl3 and C4Cl6, whereas multilayer Fe0 doses lead to the production of FeCl2 and C2Cl4 with much lower Fe0 reactivity. The data are consistent with a model where Fe atoms form intermediate species at low coverage, which consist of a Fe atom inserted into a C-Cl bond. When two Fe atoms react with C2Cl6, a different intermediate species is formed which produces the alternative reaction pathway and the formation of C2Cl4. Similar atom dropping experiments demonstrate that C2Cl4 is also reactive towards Fe0 atoms at low Fe0 dose, leading to the production of one FeCl2 molecule per C2Cl4 molecule reacted. At higher coverages, Fe atoms form clusters which are much less reactive toward C2Cl4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Competitive Oxidation and Reduction of Aliphatic Alcohols over (WO3)3 Clusters

The reactions of C1 to C4 aliphatic alcohols over (WO3)3 clusters were studied experimentally and theoretically using temperature-programmed desorption, infrared reflection-absorption spectroscopy and density functional theory. The results reveal that all C1 to C4 aliphatic alcohols readily react with (WO3)3 clusters by heterolytic cleavage of the RO-H bond to give alkoxy (RO ) bound to W(VI) centers and a proton (H+) attached to the terminal oxygen atom of a tungstyl group (W=O). Two protons adsorbed onto the cluster readily react with the doubly-bonded oxygen to from a water molecule that desorbs at 200-300 K and the alkoxy that undergoes decomposition at higher temperatures into the corresponding alkene, aldehyde, and/or ether. Our theory predicts that all three channels proceed over the W(VI) Lewis acid site with energy barriers of 30-40 kcal/mol, where dehydration is favored over the others. We also present further analysis of the yield and reaction temperature as a function of the alkyl substituents and discuss the origin of the reaction selectivity among the three reaction channels.

(WO3)3 clusters, alcohol dehydration, alcohol dehy↗

Cerium Oxyhydroxide Clusters: Formation, Structure and Reactivity

Cerium oxyhydroxide cluster anions were produced by irradiating ceric oxide particles using 355 nm laser pulses that were synchronized with pulses of nitrogen gas admitted to the irradiation chamber. The gas pulse stabilized the nascent clusters that are largely anhydrous [CexOy] ions and neutrals. These initially-formed species react with water, principally forming closed-shell (c-s) oxohydroxy species that are described by the general formula [CexOy(OH)z]-. In general, the extent of hydroxylation varies from a value of 3 OH per Ce atom when x = 1 to a value slightly greater than 1 for x > 8. The Ce3 and Ce6 species deviate significantly from this trend: the x = 3 cluster accommodates more hydroxyl moieties compared to neighboring congeners at x = 2 and x = 4. Conversely, the x = 6 cluster is significantly less hydroxylated. Density functional theory (DFT) modeling of the cluster structures show that the hydrated clusters are hydrolyzed, and contain one-to-multiple hydroxide moieties, but not datively bound water. DFT also predicts an energetic preference for formation of highly symmetric structures as the size of the clusters increases. The calculated structures indicate that the ability of the Ce3 oxyhydroxide to accommodate more extensive hydroxylation is due to a more open, hexagonal structure in which the Ce atoms can participate in multiple hydrolysis reactions. Conversely the Ce6 oxyhydroxide has an octahedral structure that is not conducive to hydrolysis. In addition to the c-s clusters, open-shell (o-s) oxyhydroxides and superoxides are also formed, and they become more prominent as the size of the clusters increases, suggesting that the larger ceria clusters have an increased ability to stabilize a non-bonding electron. The overall intensity of the clusters tends to monotonically decrease as the cluster size increases, however this trend is interrupted at Ce13, which is significantly more stable compared to neighboring congeners, suggesting formation of a dehydrated Keggin-type structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Conjugated “Molecular Wire” for Excitons

We have synthesized new conjugated, rigid rod oligomers of fluorene, F{sub n}(C{sub 60}){sub 2}, n = 4, 8, 12, and 16. These pure compounds have F{sub n} chains up to 140 {angstrom} long. The C{sub 60} groups covalently attached at both ends serve as traps for excitons created in the F{sub n} chains. Excitons created in the chains by photoexcitation reacted rapidly with the C{sub 60} groups with decays described well by the sum of two exponentials. Mean reaction times were 2.3, 5.5, and 10.4 ps for n = 8, 12, and 16. In F{sub 16}(C{sub 60}){sub 2}, the 10.4 ps reaction time was 40 times faster than that found in earlier reports on molecules of slightly longer length. The simplest possible model, that of one-dimensional diffusion of excitonic polarons that react whenever they encounter the end of a chain, fits the results to obtain diffusion coefficients. Deviations of those fits from the data may point to the need for alternative pictures or may just indicate that diffusion is not ideal. The definite lengths of these molecules enable a stringent test for theories. These results reveal that exciton transport can be much faster than previously believed, a finding that could, along with appropriate nanoassembly, enable new kinds of high-efficiency organic photovoltaics.

14 SOLAR ENERGY↗

Reactivity of a Thick BaO Film Supported on Pt(111): Adsorption and Reaction of NO2, H2O and CO2

Reactions of NO2, H2O, and CO2 with a thick (> 20 MLE) BaO film supported on Pt(111) were studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). NO2 reacts with a thick BaO to form surface nitrite-nitrate ion pairs at 300 K, while only nitrates form at 600 K. In the thermal decomposition process of nitrite–nitrate ion pairs, first nitrites decompose and desorb as NO. Then nitrates decompose in two steps : at lower temperature with the release of NO2 and at higher temperature, nitrates dissociate to NO + O2. The thick BaO layer converts completely to Ba(OH)2 following the adsorption of H2O at 300 K. Dehydration/dehydroxylation of this hydroxide layer can be fully achieved by annealing to 550 K. CO2 also reacts with BaO to form BaCO3 that completely decomposes to regenerate BaO upon annealing to 825 K. However, the thick BaO film cannot be converted completely to Ba(NOx)2 or BaCO3 under the experimental conditions employed in this study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cross-Linked Nanoporous Materials from Reactive and Multifunctional Block Polymers

Polylactide-b-poly(styrene-co-2-hydroxyethylmethacrylate) (PLA-b-P(S-co-HEMA)) and polylactide-b-poly(styrene-co-2-hydroxyethylacrylate) (PLA-b-P(S-co-HEA)) were synthesized by combination of ring-opening polymerization and reversible addition-fragmentation chain transfer polymerization. {sup 1}H nuclear magnetic resonance spectroscopy and size exclusion chromatography data indicated that the polymerizations were controlled and that hydroxyl groups were successfully incorporated into the block polymers. The polymers were reacted with 4,4{prime}-methylenebis(phenyl isocyanate) (MDI) to form the corresponding cross-linked materials. The materials were annealed at 150 C to complete the coupling reaction. Robust nanoporous materials were obtained from the cross-linked polymers by treatment with aqueous base to hydrolyze the PLA phase. Small-angle X-ray scattering study combined with scanning electron microscopy showed that MDI-cross-linked PLA-b-P(S-co-HEMA)/PLA-b-P(S-co-HEA) can adopt lamellar, hexagonally perforated lamellar, and hexagonally packed cylindrical morphologies after annealing. In particular, the HPL morphology was found to evolve from lamellae due to increase in volume fraction of PS phase as MDI reacted with hydroxyl groups. The reaction also kinetically trapped the morphology by cross-linking. Bicontinuous morphologies were also observed when dibutyltin dilaurate was added to accelerate reaction between the polymer and MDI.

36 MATERIALS SCIENCE↗

Bulk Gold-Catalyzed Reactions of Isocyanides, Amines, and Amine N -Oxides

Bulk gold powder (~5–50 μm particles) catalyzes the reactions of isocyanides with amines and amine N-oxides to produce ureas. The reaction of n-butyl isocyanide ( n Bu–N≡C) with di-n-propylamine and N-methylmorpholine N-oxide in acetonitrile, which was studied in the greatest detail, produced 3-butyl-1,1-dipropylurea (O=C(NH n Bu)(N n Pr 2 )) in 99% yield at 60 °C within 2 h. Sterically and electronically different isocyanides, amines, and amine N-oxides react successfully under these conditions. Detailed studies support a two-step mechanism that involves a gold-catalyzed reaction of adsorbed isocyanide with the amine N-oxide to form an isocyanate (RN=C=O), which rapidly reacts with the amine to give the urea product. Here these investigations show that bulk gold, despite its reputation for poor catalytic activity, is capable of catalyzing these reactions.

36 MATERIALS SCIENCE↗