Search NASA⌕ Search

SEARCH · Search NASA

Results for “STRESS CALCULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66

Induced seismicity potential based on probabilistic geomechanics for the San Juan Basin CarbonSAFE project

Although geologic carbon sequestration projects have yet to induce — or may never induce — a damaging earthquake, experiences from other deep injection industries such as hydraulic fracturing, enhanced geothermal systems, and saltwater disposal suggest that effective quantitative seismic risk assessment is necessary for deep saline carbon capture and sequestration (CCS) projects. One such imminent CCS project is the San Juan Basin CarbonSAFE Phase III program. We use Monte Carlo probabilistic geomechanical analyses combined with observations of the geologic and operational parameters of the San Juan Basin site and suggest that this project is of low-induced seismic risk. The primary analysis is split into four sections. First, we assess the literature for faults and past seismicity, and at least five faulting scenarios are directly relevant. Second, we develop and calibrate an integrated earth model for the project site. Third, we perform Monte Carlo simulations that consider reasonable uncertainties of the geomechanical parameters. Of five tested faulting scenarios, only one presents high Coulomb failure functions, but fourth, we determine the risk to be low based on the combined lack of historical seismicity, the geologic framework of the faulting scenario, and the presence of saltwater injection at the same depth as the proposed supercritical carbon dioxide injection. The most sensitive parameters in the geomechanical calculations are the fault dip and the coefficient of friction. The least sensitive are the fault strike and the orientation of the maximum horizontal principal stress.

58 GEOSCIENCES↗

Gear Test Assembly - Status Report FY2018

The gear test assembly completed testing in air and distilled water successfully under a range of loading conditions. An external torque sensor assembly was designed and added to confirm the torque readings provided by the Parker control system. Hand calculations were performed to determine the time range that the heaters could be turned on without exceeding the ASME Boiler and Pressure Vessel code Fatigue Stress Limits for 1,000,000 cycles. Transient computational fluid dynamics analyses were performed to determine the heater cycle on/off time. Steady state computational fluid dynamics analyses were performed to determine the final temperature distribution throughout the insulated assembly using a thinner but more effective insulation configuration. The initial heating tests were completed (without insulation installed) to check the heater control system. Testing of the argon pressurized seal chambers were performed and indicated the need for re-machining of several components to eliminate some leaks. Nondestructive examination of the gears continued successfully using eddy current and ultrasonic inspection techniques.

42 ENGINEERING↗

Thermal Test of 29 mm and 12 mm Targets

NorthStar medical isotopes are planning to produce important medical radioisotope molybdenum-99 (Mo-99) through photonuclear reaction on molybdenum-100 (Mo-100). In this approach, multiple thin disks of enriched molybdenum metal will be bombarded with a 40-MeV electron beam. Because enriched Mo-100 is expensive, we intend to use as much beam power as possible to achieve maximum production yield and minimize the size of the target. This requirement leads to very high beam power density (heat deposition in the target),which sets challenging requirements for cooling. Together with scientists at Los Alamos National Laboratory, a team at Argonne National Laboratory has developed and demonstrated a cooling approach using pressurized helium, which allows for efficient heat removal. One of the challenges in this approach is the management of the heat load on the target window. The target window separates the high-pressure helium atmosphere inside the target from the vacuum in the beamline so it is constantly under stress from differential pressure. Also, the window is cooled only by the helium gas flow from one side, making the window design challenging. To validate calculation models, the team performed a series of tests at Argonne’s Low Energy Accelerator Facility (LEAF). This report describes additional tests for two target designs: a full-scale target 29 millimeters in diameter and a scaled-down version, 12 millimeters in diameter. We compared the results of the window temperature measurements and cooling system parameters obtained in the experiments with those predicted by analytical calculations and Computation Flow Dynamic (CFD) simulations. Results of the experiments and calculations are presented below.

07 ISOTOPE AND RADIATION SOURCES↗

Rapid Design of Cost-Effective Refractory High Entropy Alloys Strengthened by Precipitation

Funded by the ARPA-E ULTIMATE program, this project aims to develop cost-effective refractory high entropy alloys (RHEAs) for gas turbine blades applications at 1300 degree Celsius and above. The alloy design focuses on carbides precipitation strengthening in a strong and ductile solid solution BCC matrix. The goal is to achieve balanced mechanical properties including room temperature ductility & fracture toughness and high temperature strength and creep resistance, while maintaining comparable oxidation resistance and densities to Ni-base superalloys. To accelerate alloy design, multiscale modeling including CALPHAD and first-principles density functional theory (DFT) calculations and machine learning are performed. Specifically, high throughput phase diagram calculations and screening are carried out using CALPHAD; DFT calculations are performed to predict intrinsic ductility, grain boundary strengthening potential, coefficient of thermal expansion (CTE) and temperature-dependent elastic constants. Temperature dependent yield stress, creep strain and CTE are also predicted using machine learning. Down-selected alloys are synthesized in small buttons of about 250g using arc melting for rapid evaluation on microstructure and mechanical properties before employing plasma arc melting and additive manufacturing for producing large ingots. Preliminary computational and experimental results of this project will be presented and future direction in RHEA development will be discussed.

high temperature materials↗

Morphology and dynamics of polymer nanocomposites for varying polymer filler interactions

In this paper, we explore the thermodynamic and dynamic properties of polymer nanocomposites using Stochastic Molecular Dynamics simulation in the canonical ensemble. One of the major parameters that determines the properties of nanocomposites is the filler-monomer interfacial interaction strengths. By varying the interaction strengths as well as temperature of the system we could capture the dynamical response of the system from a fluid-fluid to bridging induced network states The structural properties when analyzed show a strongly networked solid-like transition which has been augmented using dynamical analysis. Calculations show the slowing down of nanoparticle diffusion in the network phase due to jamming of the nanoparticles. At certain parameter range, the equilibrium stress-stress autocorrelation function does not decay confirming the existence of solid-like behavior. The change in mechanical properties is supported by the morphological observations.

36 MATERIALS SCIENCE↗

In situ X-ray diffraction strain-controlled study of Ti–Nb–Zr and Ti–Nb–Ta shape memory alloys: crystal lattice and transformation features

Phase and structure transformations in biomedical Ti–21.8Nb–6.0Zr (TNZ) and Ti–19.7Nb–5.8Ta (TNT) shape memory alloys (at.%) under and without load in the − 150 to 100 °S temperature range are studied in situ using an original tensile module for a low-temperature chamber of an X-ray diffractometer. Alpha″- and beta-phase lattice parameters, the crystallographic resource of recovery strain, phase and structure transformation sequences, and microstress appearance and disappearance are examined, compared and discussed. For both alloys, the crystallographic resource of recovery strain decreases with temperature increase to become 4.5% for TNZ and 2.5% for TNT alloy (at RT). Loading at low temperatures leads to additional α″-phase formation and reorientation. Heating under load, as compared to strain-free heating, affects the reverse transformation sequence of both alloys in different ways. For TNZ alloy, strain-free heating results in simultaneous ω→β and α″→β transformations, whereas during heating under stress, they are sequential: β + ω→α″ precedes α″→β. For TNT alloy, strain-free heating results in reverse α″→β transformation, whereas during heating under stress, α″→β transformation is preceded by α″-phase reorientation. - Highlights: • Comparative in situ XRD analysis of Ti–Nb–Zr(Ta) shape memory alloys is realized. • Lattice parameters of β- and α″-phases are calculated in the − 150 to + 100 °C range. • The higher the temperature, the lower the α″→β transformation strain. • Loading at low temperatures results in α″-phase formation and reorientation. • Transformation sequences upon heating with and without loading are different.

36 MATERIALS SCIENCE↗

Structure of self-interstitial atom clusters in iron and copper

The dislocation core structure of self-interstitial atom (SIA) clusters in bcc iron and fcc copper is determined using the hybrid ab initio continuum method of Banerjee et al. [Philos. Mag. 87, 4131 (2007)]. To reduce reliance on empirical potentials and to facilitate predictions of the effects of local chemistry and stress on the structure of defects, we present here a hybrid extension of the Peierls-Nabarro continuum model, with lattice resistance to slip determined separately from ab initio calculations. A method is developed to reconstruct atomic arrangements and geometry of SIA clusters from the hybrid model. The results are shown to compare well with molecular-dynamics simulations. In iron, the core structure does not show dependence on the size of the self-interstitial cluster, and is nearly identical to that of a straight edge dislocation. However, the core structure of SIA clusters in Cu is shown to depend strongly on the cluster size. Small SIA clusters are found to have nondissociated compact dislocation cores, with a strong merging of Shockley partial dislocations and a relatively narrow stacking fault (SF) region. The compact nature of the SIA core in copper is attributed to the strong dependence of the self-energy on the cluster size. As the number of atoms in the SIA cluster increases, Shockley partial dislocations separate and the SF region widens, rendering the SIA core structure to that of an edge dislocation. The separation distance between the two partials widens as the cluster size increases, and tends to the value of a straight edge dislocation for cluster sizes above 400 atoms. The local stress is found to have a significant effect on the atomic arrangements within SIA clusters in copper and the width of the stacking faults. An applied external shear can delocalize the core of an SIA cluster in copper, with positive shear defined to be on the (111) plane along the [112] direction. For an SIA cluster containing 1600 atoms, a positive 1 GPa shear stress delocalizes the cluster and expands the SF to 30b, while a negative shear stress of 2 GPa contracts the core to less than 5b, where b is the Burgers vector magnitude.

36 MATERIALS SCIENCE↗

Temperature dependence of creep compliance of highly cross-linked epoxy: A molecular simulation study

We have used molecular dynamics (MD) simulations to study the effect of temperature on the creep compliance of neat cross-linked epoxy. Experimental studies of mechanical behavior of cross-linked epoxy in literature commonly report creep compliance values, whereas molecular simulations of these systems have primarily focused on the Young’s modulus. In this work, in order to obtain a more direct comparison between experiments and simulations, atomistically detailed models of the cross-linked epoxy are used to study their creep compliance as a function of temperature using MD simulations. The creep tests are performed by applying a constant tensile stress and monitoring the resulting strain in the system. Our results show that simulated values of creep compliance increase with an increase in both time and temperature. We believe that such calculations of the creep compliance, along with the use of time temperature superposition, hold great promise in connecting the molecular insight obtained from molecular simulation at small length- and time-scales with the experimental behavior of such materials. To the best of our knowledge, this work is the first reported effort that investigates the creep compliance behavior of cross-linked epoxy using MD simulations.

36 MATERIALS SCIENCE↗

Revisit of the relationship between the elastic properties and sound velocities at high pressures

The second-order elastic constants and stress-strain coefficients are defined, respectively, as the second derivatives of the total energy and the first derivative of the stress with respect to strain. Since the Lagrangian and infinitesimal strain are commonly used in the two definitions above, the second-order elastic constants and stress-strain coefficients are separated into two categories, respectively. In general, any of the four physical quantities is employed to characterize the elastic properties of materials without differentiation. Nevertheless, differences may exist among them at non-zero pressures, especially high pressures. Having explored the confusing issue systemically in the present work, we find that the four quantities are indeed different from each other at high pressures and these differences depend on the initial stress applied on materials. Moreover, the various relations between the four quantities depicting elastic properties of materials and high-pressure sound velocities are also derived from the elastic wave equations. As examples, we calculated the high-pressure sound velocities of cubic tantalum and hexagonal rhenium using these nexus. The excellent agreement of our results with available experimental data suggests the general applicability of the relations.

36 MATERIALS SCIENCE↗

Trapped fermions in a synthetic non-Abelian gauge field

On increasing the coupling strength ({lambda}) of a non-Abelian gauge field that induces a generalized Rashba spin-orbit interaction, the topology of the Fermi surface of a homogeneous gas of noninteracting fermions of density {rho}{approx}k{sub F}{sup 3} undergoes a change at a critical value, {lambda}{sub T}{approx_equal}k{sub F}[Phys. Rev. B 84, 014512 (2011)]. In this paper we analyze how this phenomenon affects the size and shape of a cloud of spin-(1/2) fermions trapped in a harmonic potential such as those used in cold atom experiments. We develop an adiabatic formulation, including the concomitant Pancharatnam-Berry phase effects, for the one-particle states in the presence of a trapping potential and the gauge field, obtaining approximate analytical formulas for the energy levels for some high symmetry gauge field configurations of interest. An analysis based on the local density approximation reveals that, for a given number of particles, the cloud shrinks in a characteristic fashion with increasing {lambda}. We explain the physical origins of this effect by a study of the stress tensor of the system. For an isotropic harmonic trap, the local density approximation predicts a spherical cloud even for anisotropic gauge field configurations. We show, via a calculation of the cloud shape using exact eigenstates, that for certain gauge field configurations there is a systematic and observable anisotropy in the cloud shape that increases with increasing gauge coupling {lambda}. The reasons for this anisotropy are explained using the analytical energy levels obtained via the adiabatic approximation. These results should be useful in the design of cold atom experiments with fermions in non-Abelian gauge fields. An important spin-off of our adiabatic formulation is that it reveals exciting possibilities for the cold-atom realization of interesting condensed matter Hamiltonians by using a non-Abelian gauge field in conjunction with another potential. In particular, we show that the use of a spherical non-Abelian gauge field with a harmonic trapping potential produces a monopole field giving rise to a spherical geometry quantum Hall-like Hamiltonian in the momentum representation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase Field Dislocation Dynamics (PFDD) version 2.x

This disclosure is for version 2.x of a mesoscale model called Phase Field Dislocation Dynamics (PFDD). PFDD is used for investigating deformation in nanoscale (grain sizes of ~300 nm and less) materials, such as metals and alloys. This approach models the motion and interaction of individual defects, namely dislocations, in the material using scalar-valued phase field variables, also called order parameters. The system is evolved through energy minimization thus the model calculates the total energy density in terms of the phase field variables. The energy minimization is completed using the Ginzburg-Landau equation, and is implemented with explicit time integration. The total system energy can be comprised of several terms, including the strain energy (which describes dislocation-dislocation interactions), the energy due to an applied stress (dislocation interactions with the applied stress), and a core/lattice (perfect dislocations) or generalized stacking fault (partial dislocations) energy (described the dislocation core structure). The latter term in particular may vary based on the crystal structure being modeled and is typically informed using lower length scale (e.g., atomistic) approaches, although no such (atomistic) calculations are completed within the PFDD algorithm. This basic formulation was previously reviewed by Los Alamos National Laboratory and released under license number C17113. This previously reviewed version we will henceforth refer to as PFDD v1.0. PFDD v1.0 consisted of 2 codes (one parallel and one serial) plus input files, all written in the C language. This new disclosure is addressing the next versions of the PFDD, versions 2.x. There have been several enhancements of PFDD v1.0, which are described here and included in the attached code, which we will refer to as PFDD v2.0. There are also several new features described here that are either planned or already in process and are expected to be subsequent releases, i.e., v2.1, v2.2, ...v2.x.

Hunter, Abigail↗

Hot-Carrier Degradation in GaN HEMTs Due to Substitutional Iron and Its Complexes

We report the experimental data, quantum-mechanical calculations, and engineering-level modeling that provide insight into the atomic-scale processes that underlie the hot-electron degradation of AlGaN/GaN high-electron-mobility transistors during electrical stress at moderate drain bias. There is relatively large degradation (up to 20%) of the peak transconductance (g m ) in the semi-ON state, along with a small shift of the threshold voltage (V T ). The V T shift and g m degradation increase with temperature. A model of the degradation is presented, based on the hot-carrier-induced defect generation. The model considers carrier energy distributions for different temperatures obtained using an ensemble Monte Carlo (EMC) approach. The Ensemble Monte-Carlo results show that the concentration of energetic carriers is maximum at the end of the gate on the gate-drain access side in the semi-ON state of operation. The degradation is directly related to the number of carriers with sufficient energy to generate defects, and the carrier energy distribution depends strongly on the device temperature. The first-principles density functional theory calculations and the analysis suggest that the dehydrogenation of substitutional iron and its complexes is the dominant cause of the observed degradation in these devices.

Engineering↗

High order curvilinear finite elements for elastic–plastic Lagrangian dynamics

This paper presents a high-order finite element method for calculating elastic–plastic flow on moving curvilinear meshes and is an extension of our general high-order curvilinear finite element approach for solving the Euler equations of gas dynamics in a Lagrangian frame [1,2]. In order to handle transition to plastic flow, we formulate the stress–strain relation in rate (or incremental) form and augment our semi-discrete equations for Lagrangian hydrodynamics with an additional evolution equation for the deviatoric stress which is valid for arbitrary order spatial discretizations of the kinematic and thermodynamic variables. The semi-discrete equation for the deviatoric stress rate is developed for 2D planar, 2D axisymmetric and full 3D geometries. For each case, the strain rate is approximated via a collocation method at zone quadrature points while the deviatoric stress is approximated using an L{sub 2} projection onto the thermodynamic basis. We apply high order, energy conserving, explicit time stepping methods to the semi-discrete equations to develop the fully discrete method. We conclude with numerical results from an extensive series of verification tests that demonstrate several practical advantages of using high-order finite elements for elastic–plastic flow.

97 MATHEMATICS AND COMPUTING↗

Extended Barton–Bandis model for rock joints under cyclic loading: Formulation and implicit algorithm

In this paper, the Barton–Bandis model for rock joints is extended to cyclic loading conditions, without any new material parameter. Also developed herein is an implicit solution algorithm for the extended Barton–Bandis model, which can also be used for the original Barton–Bandis model for which an implicit algorithm has been unavailable. To this end, we first cast the Barton–Bandis model into an incremental elasto-plastic framework, deriving an expression for the elastic shear stiffness being consistent with the original model formulation. We then extend the model formulation to cyclic loading conditions, incorporating the dependence of shear stress and dilation on the joint position and the shearing direction. The extension is achieved by introducing a few state-dependent variables which can be calculated with the existing material parameters. For robust and accurate utilization of the model, we also develop an implicit algorithm based on return mapping, which is unconditionally stable and guarantees the satisfaction of the strength criterion. We verify that the proposed model formulation and algorithm produce virtually the same results as the original Barton–Bandis model under monotonic shearing conditions. Here, we then validate the extended Barton–Bandis model against experimental data on natural rock joints under cycling loading conditions. The present work thus enables the Barton–Bandis model, which has been exceptionally popular in research and practice, to be applicable to a wider range of problems in rock mechanics and rock engineering.

58 GEOSCIENCES↗

Radiation Crosslinking of Modifying Super Absorbent (Polyacrylamide/Gelatin) Hydrogel as Fertilizers Carrier and Soil Conditioner

A novel approach is developed for preparing a highly porous super absorbent hydrogel (SAH). Synthetic and natural hydrogel based acrylamide (Am) and gelatin (G) were polymerized and crosslinked by gamma radiation. Three hydrogels compositions have been prepared in weight ratio 1:2, 1.5:1.5 and 2:1 (wt:wt) for 30% PAAM/G and exposed to gamma radiation at dose of 30 kGy. The effect of chemical modifications on increasing the swelling power of polyacrylamide gelatin (PAAM/G) has been evaluated. The alkaline hydrolysis of PAAM/G hydrogel with concentrated NaOH converts amid groups CONH{sub 2} to carboxylic groups COONa. The modified hydrogels will take the codes PAAM-COOH/G, PAAM-COONa/G and PAAM-COOK/G that dramatically increased the degree of swelling from 220 to 720 (g/g). Furthermore, studies on the slow release ability of three kinds of fertilizer (K, P and urea) loaded on modified PAAM-COOH/G and evaluated the ability of SAH hydrogels to absorb and then gradually release water and fertilizer. A mathematical model for fertilizer release from PAAM-COOK/G was applied to calculate the diffusion coefficient D. The main aim of this article is performed the effect of soil amendment with PAAM-COOK/G on eliminating water stress was tested for bean plant (Vicia faba) irrigation cycles in drought-prone environments. The growth of bean plant was monitored by measuring the highest and size of leaves and bean seed. The effect of water stress was monitored also, by measuring the intensity of chlorophyll for both SAH and control soil. The results indicated that the chemical modification of (PAAM/G) into (PAAM-COOK/G) could greatly improve water absorbency. The experimental data indicated that the SAH has a positive effect to use as fertilizers carrier and soil conditioner.

36 MATERIALS SCIENCE↗

Multi-ion Conduction in Li 3 OCl Glass Electrolytes

Antiperovskite glasses such as Li 3 OCl and doped analogues have been introduced as excellent electrolytes for all-solid-state Li ion batteries (ASSB). Incorporating these electrolytes in ASSBs results in puzzling properties. This Letter describes a theoretical Li 3 OCl glass created by conventional melt–quench procedures. The ion conductivities are calculated using molecular dynamics based on a polarizable force field that is fitted to an extensive set of density functional theory-based energies, forces, and stresses for a wide range of nonequilibrium structures encompassing crystal, glass, and melt. We find high Li + ion conductivity in good agreement with experiments. However, we also find that the Cl – ion is mobile as well so that the Li 3 OCl glass is not a single-ion conductor, with a transference number t + ≈ 0.84. This has vital implications for its use as an electrolyte for all-solid-state batteries because the Cl could react irreversibly with the electrodes and/or produce glass decomposition during discharge–charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stress-enhancement in free-standing Si pillars through nonequilibrium dehydrogenation in SiN:H stress-liners by ultraviolet light irradiation

Tensile-strained Si pillars are desired to achieve three-dimensional (3D) transistors with high speed. Effects of ultraviolet (UV) light irradiation on tensile strains in Si pillars covered with SiN:H stress-liners are investigated as a function of the wavelength (172-436 nm). Tensile-stress enhancement is found at specific wavelengths (200-330 nm) under low-temperature heating (400 deg. C), where dehydrogenation in SiN:H is clearly detected by infrared absorption measurements. On the other hand, equilibrium dehydrogenation by high-temperature heating (>700 deg. C) without UV-irradiation does not cause tensile-stress enhancement. This nonequilibrium dehydrogenation at low temperatures opens up possibility of 3D transistors with high carrier mobility.

36 MATERIALS SCIENCE↗

Vacuum stress-energy tensor of a massive scalar field in a wormhole spacetime

The vacuum average value of the stress-energy tensor of a massive scalar field with nonminimal coupling {xi} to the curvature on the short-throat flat-space wormhole background is calculated. The final analysis is made numerically. It was shown that the energy-momentum tensor does not violate the null energy condition near the throat. Therefore, the vacuum polarization cannot self-consistently support the wormhole.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗